Used Seamark X-Ray Machine X-Ray Inspection for sale (101,129)

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Hjdpfx Aozl Scrohgst Power supply: 230 VAC, 50/60 Hz Serial number: RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Hjdpfezhw S Rjx Ahgjt

Year of construction: 2026, condition: new, Model: X5600 Application: Micro-focus X-ray inspection of electronic components and assemblies such as BGA, CSP, SMT, wafer, SOP, QFN, sensors, and more. X-ray Source Specification Value Type Sealed micro-focus X-ray tube Voltage 40–90 kV Current 10–200 µA Max. output power 8 W Microfocus spot size 15 µm X-ray leakage ≤ 0.5–≤ 1 μSv/h (safety standard) Detector & Image Quality Specification Value Hsdpfx Asymfmzjhgjt Detector type TFT industrial dynamic flat panel detector Resolution pixel matrix 768 × 768 (sometimes 1.3 MP depending on configuration) Field of View 65 × 65 mm to ~130 × 130 mm Image resolution ~5.8 Lp/mm Frame rate ~20–40 fps A/D conversion 16 bit 🛠️ Mechanical & System Specifications Property Value Machine dimensions approx. L850 × W1000 × H1700 mm Max. sample size ~280 × 320 mm Net weight approx. 750 kg Power supply 220 V 10 A / 110 V 15 A 50–60 Hz Operating system Industrial PC (Windows 7/10 64-bit) Inspection mode CNC automatic multi-point inspection Tilt function ± 30° tilt & 360° rotation for multi-angle inspection Software & Features ✔ Automatic defect recognition: Y/N, crack, broken wire, offset, bridging, etc. ✔ CNC-controlled automatic inspection over multiple points. ✔ Infrared automatic navigation and positioning. ✔ Inspection report generation. ✔ Multi-angle & 360° rotation inspection for enhanced defect detection.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Hsdpfxex D Tbme Ahgjt Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2017, total height: 1,800 mm, total width: 1,100 mm, total length: 2,000 mm, overall weight: 1,000 kg, Equipment: documentation/manual, For Sale: Loma X-ray machine with Loma ejection unit Brand: Loma Type: X5 & CV Year of manufacture: 2017 Maximum product width: 45 cm X-ray / radiography Hedezv S Uiopfx Ahgjt It is possible to view this machine on-site. If you have any questions or comments, please do not hesitate to contact us.

Year of construction: 2015, condition: ready for operation (used), An X-ray inspection device Mekitec for the food industry is available. Measurement device type: Rad Eye B20, max. power: 60kV/1.66mA/100W, method: inline inspection, test object: packaged food products, tunnel clearance X/Y: approx. 250mm/100mm, belt length: 1200mm, belt width: 250mm, max. belt speed: 1.3m/s, max. product weight: 5kg, machine dimensions X/Y/Z: approx. 2000mm/550mm/1200mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Hodpfsxnp Scjx Ahgjt

Condition: good (used), Bizerba X Ray Machine With reject facility Fully stainless steel Tests carried out using certified test pieces, non-ferrous, stainless steel, ferrous metals Hedpfx Ahsyivgqegjt The unit comes with an option of a Gamma Monitor, Red Eye G20-10 In every day use

Condition: like new (used), Ishida x-ray machine is in great condition. It's hardly been used. It has come direct from a major food manufacture. Hedsy A Rh Repfx Ahgot

Year of construction: 2025, condition: new, functionality: fully functional, the Seamark XC1000 X-Ray Component Counter: Smarter, Faster, and Fully Automated At Active-PCB Solutions, we know that accuracy, efficiency, and seamless integration are not optional, they’re an essential part of our manufacturing process. That’s why we’re excited to introduce our new Seamark XC1000 X-Ray Component Counter which has just been installed on our shop floor by Advanced Manufacturing Solutions Ltd. The next-generation offline X-ray component counting system is designed to redefine how we manage and verify our SMD component inventory. You can find out more about this new technology and how we intend to put it to full use below! Introducing the Seamark XC1000 X-Ray Component Counter Precision Counting Powered by AI Leveraging an advanced AI algorithm, this intelligent Seamark XC1000 X-Ray Component Counter system provides 99.99% counting accuracy for all SMD components sized 01005 and above, meaning we can say goodbye to manual errors and time-consuming reel unpacking. The XC1000 counts 1 to 4 reels simultaneously with no unspooling, no guesswork, and no downtime. Hodpjyzpkzsfx Ahget Ergonomic Design Meets Automation The XC1000 features an ergonomically designed workstation where the operator can sit comfortably and monitor the easy-to-read counter screen. With an automated stage movement system and anti-pinch safety design, reel handling is simple, safe, and efficient. The unit is compact and mobile, thanks to built-in wheels for easy relocation. Smart Labeling and Real-Time Integration Mislabeling and manual input errors are inevitable and costly. However, with its error-proof labeling function, the XC1000 automatically detects and recognises each reel, instantly printing the correct label via a TSC industrial printer. This intelligent workflow is further enhanced by seamless real-time integration with MES, ERP, and WMS systems, enabling live data exchange and automatic result uploads. Built for the Modern SMT World The XC1000 is built to handle the full range of reel sizes (7”–15”), heights (5–80mm), and component types, including moisture-proof bag packaging, bulk materials, and JEDEC trays. Its amorphous silicon flat panel detector delivers sharp, high-resolution images with a 430mm × 430mm field of view, supported by four optional cameras for automatic barcode reading. Industry-Leading Database & Cloud Intelligence What sets the Seamark XC1000 X-Ray Component Counter apart is its dynamic, global X-ray component database, which includes: 15,000+ material profiles 60 million+ testing images 700,000+ core reference images Weekly updates with 160,000 new images Over 8.6 million classification training images This continually evolving database ensures compatibility with 99.2% of global components. Updates are cloud-synced monthly, keeping the whole system current and reliable. Key Technical Specs at a Glance Input Power: 220V, 10A, 50–60Hz Control System: Windows 10 64-bit X-Ray Source: Sealed microfocus (30–80KV, up to 1000 μA) Detector: 3072×3072 matrix, 139μm resolution Max Output Power: 56W Counting Speed: Fully automated, operator training not required.

Year of construction: 2009, condition: ready for operation (used), An X-ray sorting machine for jars in the food industry is available. Sorting width: 500mm, machine dimensions X/Y/Z: approx. 2300mm/1900mm/2200mm, weight: approx. 600kg. Documentation available. On-site inspection is possible. Hsdpfsv I U Igox Ahgjt

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Hedpsy Ni Ivefx Ahgjt Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2011, condition: like new (used), functionality: fully functional, X-ray sorting machine. Manufacturer: TITECH TOMRA Type: X-TRACT 1200 Machine in PERFECT working condition. Complete machine overhaul performed. Source replaced: €35,000 All sensors replaced: €29,000 Belt replaced: €10,000 Application: Sorting of brominated plastics in D3E streams Hedjyy A Uwjpfx Ahgst Sorting of metals Sorting of wood, glass, and PVC for the production of RDF (Refuse-Derived Fuel) Sorting of organic waste

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. Hjdpfjzi Awhjx Ahgot For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable Hjdpfeyzf Nasx Ahgst 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79248 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Hedpfx Ahozkbirsgot

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Hodpfx Aszuxn Tehgot Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2023, condition: ready for operation (used), Automatic 3D XRAY with laser option for Z reference, without calibration plate from 01/2023 with 1500 h. Hedpfxezuwwye Ahgst

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Hjdpfezav D Dox Ahgst Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2018, condition: ready for operation (used), A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available. Hsdjt Dpn Ajpfx Ahgot

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Hedpfx Ahszrh D Ssgst Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site.

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine in lovely condition. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Hodpszgwq Dsfx Ahgjt Quill Travel: 140 mm TABLE: Length: 1,930 mm Width: 356 mm T-Slot Width: 15.9 mm Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg

Condition: used, Year of construction: 2008, XYZ SMX 5000 CNC Vertical Turret Milling Machine With Prototrak SMX Control Hodpfxszvp E Ej Ahget Table Dimension 1,930 x 355mm (4 'T' Slots). Maximum Table Load 850kg. Axis Travel 'X'=1,524mm, 'Y'=596mm, 'Z'=520mm. Quill Ø116mm. Quill Travel 127mm. Spindle Nose to Table 620mm. Spindle Centre To Column Face 520mm. Speed Range 40-5,000rpm (7.5kW Motor). Spindle Taper ISO40. Power Drawbar. S/No. 11100 (2008). With Coolant System, Table Guarding, Work Light, Vertex Heavy Duty Vice (Jaw Width 205mm), Indexing Head 3 Jaw Chuck 200mm, Centre Height 170mm, 8 Drawer Steel Cabinet With Contents Of Spindle Tooling & Clamp Sets. Approx Overall Dimensions L5,805 x W3,143 x H2,690mm. Weight 3,100kg. Note: Machine Had Control Upgrade 2023.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Hodpfx Ahoyaywhegjt Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 100281518, total height: 2,260 mm, total width: 1,550 mm, total length: 1,685 mm, product height (max.): 310 mm, product width (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! The original price was over 100,000 EUR! The device is ready for loading & packed for transport! Loading can be handled by the seller. Hedjy Ath Hjpfx Ahget TECHNICAL DETAILS Maximum inspection width: 150 mm Maximum inspection height: 310 mm CONVEYOR SYSTEM Conveyor type: Turn table Speed: 12 – 45 m/min MACHINE DETAILS X-ray Generator Voltage: 30 – 75 kV Current: 1 – 8 mA Power: max. 300 W Dimensions (L x W x H): 1,685 x 1,550 x 2,260 mm Protection class: IP65 / IP66 Electrical data Power supply: 200 – 240 V Frequency: 50 / 60 Hz EQUIPMENT Rotary table conveyor Hermetic air cooling X-ray inspection system

Condition: used, Year of construction: 2008, Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically triggers a reject mechanism if contamination is detected. Technical Data - Construction: Stainless steel frame for hygienic industrial use - HMI: Integrated touchscreen for operation, calibration, and product changeover Hsdpfx Aeyzc D Uohgot - Electrical Data - Power supply: AC 230 V, single phase - Current: 11.0 A - Frequency: 50 / 60 Hz - Inspection Function - Detection of foreign bodies: - Metal - Glass - Stones - High-density plastics - Additional capabilities: - Product integrity verification - Detection of missing components - Density-based inspection