Used Schwarzmüller Jumbo Mit Bordwänden Und Schwanenhals for sale (11,947)

Condition: used, maximum load weight: 22,350 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 08/2002, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our “General Terms and Conditions”, without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale: Schwarzmüller Gooseneck Trailer (Chassis 201) First registration: 08/01/2002 29,000 kg Unladen weight: 6,650 kg Payload: 22,350 kg Overall length: 13,850 mm Overall width: 2,480 mm Overall height: 4,000 mm TÜV (technical inspection) valid until: 11/2026 Fixed front wall Curtain on both sides Edscha Joloda flooring with locking clamps across Tie-down points in the floor, on the sides and at the rear Folding side panels Gooseneck approximately 4,000 mm long and internal height approximately 2,670 mm Low-bed approximately 3,000 mm high and 9,700 mm long internally Portal doors 1/2 and 1/2 at the rear Forklift tine holder Air suspension 1st axle: lift axle SAF axles Tires 235/75R17.5, approximately 50/50% tread, twin tires Bwsdpfezbpdaox Albjn 2 x wheel chocks 2 x 12-ton, 2-speed geared winch Price: €8,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typos, and prior sale are reserved.

Condition: used, Year of construction: 2023, color: green, loading space volume: 11 m³, loading space width: 2,420 mm, loading space length: 5,100 mm, loading space height: 900 mm, mileage: 1,001 km, first registration: 01/2023, gearing type: other, driver cabin: other, Vehicle location: Bovenden, swing doors. Body: roll-off container with foldable aluminium side walls, approx. 11m³, total container length approx. 5800mm! The roll-off frame is from 2023 and the Schwarzmüller body is considerably older. The exact year of manufacture cannot be determined, as there is no type plate present! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors excepted! Bwjdpfx Ajy Dvdtelben

Condition: used, maximum load weight: 33,780 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2019, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Schwarzmüller timber semi-trailer with bolster and stakes * BPW axles with air suspension and disc brakes * 1st axle liftable * Spare wheel holder * Tyres 385/65R22.5 * Aluminium rims * Work lights * 2x storage compartments * Jost landing gear Bwodpfxjyld U Ij Albjn For further information, please feel free to contact us.

Condition: used, maximum load weight: 28,410 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2012, loading space length: 13,600 mm, loading space width: 2,400 mm, loading space height: 700 mm, FLIEGL flatbed semi-trailer with drop sides and 3 axles Payload: 28,410 kg TYPE: SDS350 Brakes: disc Axle: BPW + air suspension 2x landing legs (JOST) Bodpfxowgghno Albswn Length: 13.60 m Width: 2.40 m Height: 0.70 m We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 2005, container length: 24 ft, overall weight: 16,000 kg, empty load weight: 3,250 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,720 mm, machine/vehicle number: 610272 8, JUMBO BDF swap body swap body with roller shutter * beaded steel box body * Crane and stackable * Length 7.45 m * Roller shutter door * Interior keyhole panel * Screen printed floor * neutral white WITHOUT labeling! * Guide tunnel at the front slightly deformed * Slight rust on frame and body Bwjdpfx Aei Avllelbon * Parking height: 1.02 - 1.32 m * Loading height at the roller shutter: 2,620 mm * External height: 3,000 mm * UVV inspection on request new * Manufacturer: KRONE Delivery possible nationwide! We always have larger quantities of different manufacturers and designs for sale or for RENT in stock !!! All prices net plus VAT!

Condition: new, machine/vehicle number: 3c70e9a5d82cfb3ada79baf95, empty load weight: 8 kg, maximum load weight: 17 kg, overall weight: 26 kg, axle configuration: 2 axles, tire size: 205 / 65 r 17,5, Further information Chassis semitrailer forwarding Welded fine-grained steel construction, fifth wheel plate with replaceable 2 kingpins, rear bevel to approx. 1920 mm, suspension bar for ramps at the rear and front on gooseneck, grinding rollers at the rear, drop center after cranking up to the axle unit. Drawing approval required from customer in case of order! Pair of lashing lugs at the top and side of the outer frame, 10 tons each Pair of lashing eyes embedded in the outer frame on gooseneck, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Folding rear support, mounted on the outside Wheel chocks with holder Bedpfx Alsi Ri Hrebewn Aluminum side collision protection Steel underride guard for EG, if technically possible Quarter-shell mudguards with anti-spray flaps according to EG 1 pair of wheel recesses after gooseneck recessed in the low bed of the tramline area, sloping towards the entrance. Length at bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on rear slope. Depth approx. 200 mm. Note! Frame in main beam area 200 mm higher than wheel recess. In the event of an order, a precise technical inspection is still required. Wheel recess cover can be pulled out from the drop deck with hardwood inserts, on rear slope with hardwood inserts. Electric cable winch, 24 volt, pulling force 5500 kg, mounted in the offset gooseneck, not reaching into the loading area, operation with radio remote control, operation with radio remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller on rear slope. Axles + suspension SAF or BPW drum brake axles of our choice Air suspension with lift & lower valve + auto-reset function Wheels and tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 to tire load capacity at max. 90 km/h at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS make Haldex, electronic brake system with EBS socket at the front, without connecting cable (sent to the customer for approval brake calculation.15.07.2021) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS-Canbus signal, for display via display in the cab, truck must be prepared accordingly, no truck instal. (no calibrated scales) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / checker plate covering 30 mm screen-printed floor, in the drop floor between the longitudinal beams in the middleIn the tramline area covered with toothed grating in the wheel recesses with steel/checker plate covering. Access ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for entering the drop deck Pair of steel ramps for crossing on gooseneck Drop sides Approval / plates Country of approval: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Prepared for single-line license plate holder Contour markings with reflective strips to ECE R 048, yellow at the sides and red at the rear Warning sign according to ECE -

Condition: used, machine/vehicle number: 187, empty load weight: 4,950 kg, maximum load weight: 31,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2014, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,640 mm, loading space volume: 28 m³, suspension: air, tire size: 385/65 r22,5, Equipment: ABS, Color RAL 6021 pale green EBS Disc brake Wheelbase 1,310 mm Floor + wall 6 mm with Quicksilver lining Aluminum frame BPW axles Alcoa aluminum rims Electric Schwarzmüller sliding roof Folding underride guard Permissible total weight 36,000 kg / technically possible total weight 39,000 kg VIN no. 345946 Errors excepted Bwodpfxsk Ebbzo Albsn

Condition: used, machine/vehicle number: 157, empty load weight: 6,310 kg, maximum load weight: 29,690 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2016, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65 r22,5, color: green, Equipment: ABS, Disc brake EBS Wheelbase 1,310 mm Floor 5 mm - wall 4 mm Hydr. tailgate and swinging BPW axles Alcoa aluminum rims Electric Cramaro sliding roof Folding underride guard Perm. total weight 36,000 kg / technically possible total weight 39,000 kg Bedpfx Aji Ehy Eolbswn VIN no.: 377690 Errors excepted

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible Bsdpfxoykuh Nj Albown TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 1992, condition: not inspected (used), Carrying bag machine and double net clipper manufacturer Strapack for apples potatoes 1-5 kg possible, Machine is in very good condition, was only in operation for about 10 years Bwodpfx Ashh Idrjlbsn Machine has 4 trolleys, which is an output of about 15 - 20 2 kg bags per minute. Machine is ready for use with all accessories. Machine is completely overhauled, price on request. Also sell spare parts for EW20 EW 10 AND NET CLIPPER UC20 If you are interested, please contact

Condition: reconditioned (used), functionality: fully functional, Stock No.: 2858 1 used, partially overhauled and function-tested compounding and pelletizing line, consisting of: Extruder Berstorff (Krauss Maffei) Type ZE 60 A - 34 L/D twin-screw co-rotating Extruder drive 160 kW AC Degassing with vacuum pump Laser cutting head / melt filter Melt pump Eprotec Melt x10 ECON EUP 600 underwater pelletizer, complete with start-up valve water system granulate drying centrifuge Bwsdjy At Iaspfx Albsn >> 1 year PLASTICO warranty OPTIONAL for an additional charge: Material conveying system Gravimetric dosing units Granulate classification Pellet filling station for Big Bags or Octabins Additional compounding plants, pelletizing systems, gravimetric dosing units available from our Wuppertal facility. Visit us or send us your enquiry.

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Weights: * Gross vehicle weight (permissible): 24 t * Gross vehicle weight (technical): 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, beveled corners approx. 5,350 mm = lowbed platform – flat loading area approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling trains, the legally permissible overall height and total train length must be observed! Chassis: * Steel welded construction with front gooseneck and rear bevel * Ramp slope with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the lowbed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the lowbed, 1x on the ramp slope, 2x on the raised platform) * Standard ball-bearing turntable Chassis attachments: * Lowbed platform can be extended on both sides with approx. 50 mm softwood boards (track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform between the longitudinal beams, 1 pair at the very back in the bucket recess left and right, 1 pair at the front on the raised platform in front of the gooseneck between the longitudinal beams, 1 pair at the rear of the lowbed in front of the ramp slope in the bucket recess left and right Drawbar: * Fixed drawbar with swivel eye approx. 40 + 50 mm, cranked design, silent bushing mounting, drawbar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support system: * 2 automatic folding supports at the rear Axles: * SAF air suspension low-bed axles with drum brakes, axle load capacity 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand according to manufacturer’s selection Brake system/Suspension: * Brake system compliant with ECE regulation R13 * Dual-line compressed air brake system * Wabco make, EBS system 4S3M, sensors on 1st and 2nd axle * RSS/RSP – stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift and lower function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS Canbus signal for display in the cab (truck must be properly prepared; not a calibrated scale) Bsdjy Aug Repfx Albown * Tire pressure monitoring according to ECE regulation 141, with pressure sensor in the wheels, for display in cab (display must be present in tractor unit) Flooring: * Approx. 50 mm impregnated softwood floor, protruding approx. 5–10 mm above the top of the frame * Steel chequer plate cover above the wheels Ramps: * 2 foldable, single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with approx. 35 mm impregnated hardwood floor * Ramps adjustable

Condition: new, maximum load weight: 30,860 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Bwodpfxjy Auhnj Albon Extract from the equipment list. Full equipment details available upon request. Chassis: * Steel welded construction with front neck, front corners chamfered and rear taper, drive-on ramp with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed retractable approx. 10 t lashing rings (2x on the raised platform, 1x in the front neck slope, 3x in the low bed between the wheel recesses, and 1x in the entry ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located in front after the neck with one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN/piece * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between the 3rd and 4th axle with one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with wheelbase approx. 2,700 - 3,600 mm and wheel diameter approx. 1,485 - 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer longitudinal beams) Chassis attachments: * 5 pairs of stake pockets in the outer frame for box section posts approx. 100 x 50 x 5 mm (3x in the low bed and 2x on the raised platform) * Extensions with softwood planks approx. 50 mm, extendable on both sides of the low bed platform (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair front on the raised platform, inside the longitudinal beams, 1 pair fully at the rear in the excavator bucket recess left and right, 1 pair front on the raised platform before the neck, inside the longitudinal beams, 1 pair rear in the low bed before the drive-on slope, in the excavator bucket recess left and right Drawgear: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, with silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support equipment: * 2 hydraulic rear supports - operated individually, controls installed in separate stainless steel box underneath Axles: * SAF air-suspended low loader axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic slack adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make Conti HTR2 (tyre load capacity approx. 12 t / axle) Brake system/Suspension: * Brake system per ECE directive R13, dual-line pneumatic brake system * Brake system make Wabco EBS system 4S3M, 1st + 3rd axles with sensors * RSS/RSP – stability program * Spring-actuated parking brake on 3rd + 4th axle * Aluminium air tanks for gross weight 44 t * Brake/air connection lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Tensioning rubber as holder for EBS and electrical plug * Air suspension with lift/lowering facility, operated separately front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/Safety systems: * SWIT - Schwarzmüller Intelligent Telematics Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 - 10 mm above frame upper edge * Steel chequer plate cover over rear wheels

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Bwedpsyq Rdysfx Albon Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable Bsdpfxoykugxe Albswn - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge

Condition: used, 600 - 700 with interchangeable inserts and control end measures Bodpfx Alocipmmebswn in a wooden case

Condition: used, Technical details: Bwjdpeyhwnrefx Albon Manufacturer: Maschinenfabrik ECKER & SCHMIDT 400V, 0.65/0.9 kW height-adjustable table

Condition: new, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, suspension: air, tire size: 275/70R22,5, Equipment: ABS, | Schwarzmüller Jumbo building materials trailer | BPW axles with disc brakes | Pallet box, 2x stainless steel tool box, | Rear storage compartment 600x400x2.900 | side wall height 1.00m front wall height: 1.40m | loading dimensions: 7.10mx2.48m | aluminum rims XLite | tires 275/70R22.5 twin tires | plastic tarpaulin with rubber bands, | aluminum storage tray and front step bar, | subject to errors, input errors and prior sale. Bsdpfxetuwbpj Albjwn

Condition: used, empty load weight: 7,660 kg, maximum load weight: 33,840 kg, overall weight: 41,500 kg, axle configuration: 3 axles, first registration: 02/2001, loading space length: 12,800 mm, loading space width: 2,520 mm, loading space height: 920 mm, total length: 2,550 mm, total width: 2,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, SAF axles, air suspension, 1st axle liftable, last axle self-steering, lifting+lowering, ABS (anti-lock braking system), lashing eyes, supports, twin tires, storage box Bodpfx Alswcpcgsbown Semi-mounted height 1350 mm, loading height 920 mm, loading length over axles approx. 8700 mm, loading length over pins approx. 4000 mm, offset height approx. 625 mm, device for rotating beacon, 800 mm drop sides can be folded down, 6 pairs of lashing brackets in the low bed outer frame, 6 x twist lock on the loading area, warning signs front and rear extendable to 3500 mm, semitrailer front dimension from bulkhead to kingpin 1750 mm, approx. 3,000 EUR invested in maintenance! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, empty load weight: 6,560 kg, maximum load weight: 18,440 kg, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,540 mm, loading space height: 850 mm, wheelbase: 7,500 mm, color: blue, gearing type: other, driver cabin: other, Equipment: ABS, additional headlights, compressed air brake, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: Length 13,700 mm x Width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminum ramps, 3,000 x 400 mm, laterally movable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase 7,500 mm + 1,250 mm * Gross vehicle weight possible: 27,200 kg * Unladen weight: 6,560 kg * Payload possible: 20,640 kg If a new general inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new general inspection (TÜV), without new DGUV, without new SP, without new UVV. Bwodpfx Ajxu Nnwjlben You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. Buyers are required to independently satisfy themselves as to the condition and specification of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 200 mm, saw blade diameter: 520 mm, rotational speed (min.): 2,800 rpm, cutting length (max.): 420 mm, workpiece height (max.): 200 mm, feed length X-axis: 420 mm, length stop: 8,800 mm, pressure: 5 bar, space requirement length: 8,800 mm, space requirement width: 1,200 mm, Equipment: double-sided, Mobile saw base frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 - 5960 mm, with digital LED measurement display, measuring length including extension approx. 8800 mm, Saw base frame with 6 crank supports ensure safe standing when working. With electrical power distribution and 3-way socket 230 V Mobile saw base frame Beck ESF 1, saw ZS 200 mounted on base frame Bwsdpfjv Hhg Tjx Albjn

Condition: used, empty load weight: 4,200 kg, maximum load weight: 19,800 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 01/2018, loading space length: 10,000 mm, loading space width: 2,550 mm, loading space volume: 22 m³, suspension: air, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 4 stake pockets at the front, 5 stake pockets in the middle, 6 pairs of stake pockets in the outer frame, 4 stanchions, 8 pairs of lashing eyes, sold to order, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Bwjdpfx Aezatw Iolbon

Condition: used, mileage: 342,183 km, power: 315 kW (428.28 HP), first registration: 04/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: black, gearing type: mechanical, emission class: euro4, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, crane, DAF XF 6x4 with Space Cab and Crane: Robust, well-maintained, and virtually indestructible MKG HLK 381 a8 crane mounted on a DAF XF 6x4 with Space Cab. * No outstanding maintenance required – simply get in and drive. * Second owner, one driver. * Stability: without ballast platform: 100% behind the cab with ballast platform: 100% behind the cab / 50% in front of the cab with ballast platform and additional ballast: 100% / 360° * Ball and pintle coupling / drawbar coupling, new. * Ballast platform retrofitted, including cavity sealing. * Cab (MB Carbon Black Metallic) / Chassis (MB Nova Grey) / Platform (Black RAL 9005) repainted in 2020. * No rust in the known DAF problem areas; cavities sealed with wax. * Various hoses and pipelines renewed. * All seals on the telescopic outriggers renewed. * Telescopic outriggers (rear supports) new. * Engine Start/Stop system retrofitted. * 9th mechanical extension for the MKG crane retrofitted. * Mounts for Böcker brick carrier, brick tongs, pallet tongs, and towing bar on the front of the platform. * Oil cooler switch renewed. * Pins and bushings in the knuckle arm renewed. * Radio remote control including receiver, 2 batteries and charger, renewed. Bedsza Ncaspfx Albewn * UAV control unit with central display, renewed. * Work platform. * 4 toolboxes on the chassis. * 2 center outriggers. * 3 additional ballast weights. * Max. hook heights: 24.30 m hydraulically 27.00 m with 9th mechanical extension* * Rotzler 3 t winch * Load capacity at max. outreach: 0.92 t * Interior: curtains, seat covers, bed covers, new. * UVV 06/27 (German safety inspection certificate) * Maintenance/repair invoices totaling €100,000 are available. * Sold without crane accessories. If you have any questions, please do not hesitate to contact us.

Condition: used, mileage: 342,183 km, power: 315 kW (428.28 HP), first registration: 04/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: black, gearing type: mechanical, emission class: euro4, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, crane, DAF XF 6x4 with Space Cab and crane: Robust, well-maintained, and virtually indestructible MKG HLK 381 a8 crane on a DAF XF 6x4 with Space Cab. * No outstanding maintenance required – just get in and drive. * Second owner, one driver. * Stability: without ballast platform: 100% behind the cab with ballast platform: 100% behind the cab / 50% in front of the cab with ballast platform and additional ballast: 100% / 360° * Ball hitch / pintle hook, new * Ballast platform retrofitted, including cavity preservation * Cab (MB Carbon Black Metallic) / Chassis (MB Nova Grey) / Platform (Black RAL 9005) repainted in 2020 * No rust in the areas known for DAF vehicles; cavities sealed with wax * Various hoses and pipelines renewed * All seals on the telescoping rods of the outriggers renewed * Telescoping rods of the rear outriggers, new * Engine Start/Stop system retrofitted * 9th mechanical extension for the MKG crane retrofitted * Mounts for Böcker brick carrier, brick tongs, pallet tongs, and towing rod on the front panel of the platform * Oil cooler switch renewed * Pins and bushings in the knuckle arm renewed * Radio remote control including receiver, 2 batteries, and charger renewed * UAV control unit with central display renewed * Work platform * 4 toolboxes on the chassis * 2 center supports * 3 additional ballast weights * Max. hook heights: 24.30 m hydraulically 27.00 m with 9th mechanical extension* Rotzler 3 t winch * Load capacity at max. outreach: 0.92 t * Interior: curtains, seat covers, bed covers, new * UVV 06/27 (German safety inspection certificate) * Invoices for modifications/maintenance totaling €100,000 available. * Sold without crane accessories Bjdpfx Asza Nb Nslbjwn If you have any questions, please do not hesitate to contact us.

Condition: good (used), Approx. 3,000 units, Rotho boxes 40x30x22 cm with lid and 60x40x30 cm without lid - used - : Price for the entire lot ex location: €5,500 (net)! Sale only as a complete lot! Small with lid Large without lid Manufacturer Rotho Rotho Year of manufacture - - Type - - Dimensions 40 x 30 x 22 cm 60 x 40 x 30 cm Internal dimensions 36 x 26 x 21 cm 56 x 35.5 x 30 cm Quantity 2,000 pcs 1,000 pcs Quantity per pallet 64 pcs 20-24 pcs Condition The condition of the containers may vary. There may be signs of use, such as worn corners. The interiors are clean, as they come from production. The exterior surfaces may have adhesive residue from labels. Available: immediately Location: 79677 Schönau, Germany • Small containers with lid (dimensions: 40 x 30 x 22 cm); quantity approx. 2,000 pcs. Bwjdjyr Hm Tspfx Albsn