Used Schröder-Fasti Hydraulic Folding Machine for sale (74,495)

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment Nsdpfxsza D Eio Amysld - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, working width: 2,080 mm, bending angle (max.): 145 °, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 9,000 kg, total length: 9,500 mm, total height: 2,100 mm, working length: 8,020 mm, DURA 8.3 hydraulic bending machine – for roofing and facade profiles. ✅ BMS multi-touch controller • Touchscreen • Intuitive bending design on the controller • Automatic calculation of bending sequences with graphical simulation Nedpfswm Ha Rox Amyold • Convenient profile programming, transfer via Wi-Fi or USB • Archive of all previously used projects on the machines ✅ Design and functionality • Robust electric knife driven by a maintenance-free timing belt • Large amount of space for maximum design freedom for bent parts • Adjustable material support for additional feed • Adjustable clamping beam (adjustment to the appropriate material thickness) • Adjustment of the initial setting separately for each arm • Pre-bending in the clamping beam for edge hemming • Removable clamping strip for the bending beam, 15x60 mm, 3 pieces • TAZ 1000 stop with an adjustment range of 30-1000 mm • 5 fingers of the stop, adjustable along the entire length of the device • Multi-functional foot pedal • Complete safety package

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives 1 side cassette after the knife Additional veneer cassette. Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work. Nedpfx Amjzlaimeyold

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage Nlodpfszl A Rajx Amyjd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 6,500 kg, Hydraulic plate shear Manufacturer: Schrödergroup, Type: Powershear – 3000 x 6mm Year of manufacture: 2020 Technical data Manufacturer: Schröder Type: 530 - 30/6 Year of manufacture: 2020 Sheet width: 3040 mm Sheet thickness: 6.00 mm (400N/mm) Nledpjzi Ezvefx Amyjd Shear gap adjustment: 0.5 – 1.8 mm Stroke rate: 24-61 strokes/min Drive power: 12.0 kW Space requirement (L x W x H): approx. L 4.00 x 3.00 x 1.96 m Weight: approx. 6.5 t Equipment - 12" touchscreen control PSC 150 on a swiveling panel - energy-efficient drive for frequency-controlled motor and pump - automatic shear gap adjustment - Adjustable clamping pressure, pre-selectable via the control unit - motorized back gauge 10-1000 mm on ball screw spindles - pneumatic sheet metal holding device - LED cutting edge lighting - programmable start and end position of the blade beam - angle stop mounted on the left, incl. electronic length measuring system, fine adjustment and side folding stop on linear guide 1000 mm - 2 stop arms with ball rollers, movable on a linear guide - table support made of stainless steel sheets, incl. ball rollers - protection of the rear side with a light curtain - scrap and small parts chute to the front, incl. "Return to Sender" function - movable table extension mounted on a guide rail - finger guard, retractable to approx. 1500 mm, incl. electrical protection All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Nljdpfx Amszi Uq Hoyod Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: like new (used), FASTI Type 63x1.5 Beading Machine / Like new, almost unused -CE marking -Upper beading roller, hydraulically adjustable -Control panel -Various beading tools -Hydraulic unit Nlodezivikopfx Amyod -Documentation Dimensions: L x W x H / Weight 1200 kg Errors and omissions excepted.

Condition: ready for operation (used), Roll bending machine FASTI - Type 2040x2mm - GS certification - Roller diameter 105mm - Max. sheet thickness over the entire length 2mm - Foot switch Nsdozb Emdjpfx Amyjld - Safety device Dimensions: L x W x H 3 x 1.1 x 1.4 meters / Weight: 1500 kg Errors and omissions excepted.

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm Nledpfsy Twfqjx Amyed - Tube ejector - Hydraulic tube support for large tubes

Condition: good (used), functionality: fully functional, machine/vehicle number: 02212007, control type: CNC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, Swing bending machine in excellent condition. It is powered on and can be inspected at any time. Nledox Eiw Tspfx Amysd

Condition: good (used), Heiber Schröder CE Speedformer Tray forming machine Single-track machine, manufactured by Heiber & Schröder, Germany. Year of production: 2022. Nodpfxezlafhj Amysld Description: The machine can produce packaging such as trays, trays with lids, leak-proof trays (sealed – lined with PE foil), clam-shell (hamburger), French fries (fries), Chinese food (conical), and more. Includes documentation, tools, accessories, and a cold glue system.

Condition: good (used), Heiber Schröder CE 1000-2 Tray forming machine Two-lane machine, manufactured by Heiber & Schröder, Germany. Manufactured in 2011. Nledpszlad Defx Amyed Description: The machine can produce packaging such as trays, trays with lids, leak-proof trays (sealed – lined with PE film on the inside), clam-shell (hamburger), French fries (fries), Chinese food (conical), and more. Includes documentation, tools, accessories, and a Nordson hot and cold glue system.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Nlodpsy Uiyvsfx Amyjd Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: ready for operation (used), functionality: fully functional, total length: 930 mm, total width: 1,530 mm, total height: 1,011 mm, production capacity: 650 unit/h, TECHNICAL DETAILS Folding capacity: 650 units/hour MACHINE DETAILS Nodszmr Evspfx Amysld Machine dimensions: 930 × 1,530 × 1,011 mm Power supply: 220 V, single-phase/two-phase Power consumption: 0.7 kW FEATURES Integrated packaging 6 different folding programs

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Nlodjttc Uaspfx Amyod

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm Njdpemck Ryofx Amyeld - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), sheet width 1280 mm plate thickness 3.5 mm Njdpjznnhcjfx Amyjld bending angle max. 180 ° stroke of upper beam 200 mm Swing beam adjustment 30.0 mm Bending time for 90° 5.5 sek Control konv. voltage 380 V total power requirement 2.0 kW weight 1180 kg range L-W-H 1930 x 1750 x 1175 mm Features: - Simple electric motor-driven swivel bending machine - Manual angle adjustment * via electric potentiometer - 1x bending tool set - Manual lower jaw adjustment .. 30.0 mm - Emergency stop button on the front - 1x freely movable dual foot switch - User manual (PDF)

Condition: new, Year of construction: 2026, Claw machine lift with an impressive lifting capacity of 20 tons is an excellent tool for industries that require huge loads. Equipped with a robust design and innovative technical solutions, this claw lift ensures efficiency, safety and reliability in every application. The main distinguishing feature of the claw jack is its claw lifting mechanism, which allows for reliable and precise gripping of various objects. Thanks to this, handling large and non-formine loads becomes much more efficient, and the operator has full control over the lifting process. The lift with a lifting capacity of 20 tons is not only strength, but also protection against failures, it guarantees safe lifting and transport of heavy loads to high altitudes. Nledpfxevvk D Hj Amyed The claw lift design has been carefully designed to ensure maximum stability during operation. The solid frame and durable materials make the jack cope with difficult industrial conditions while maintaining full functionality and reliability. To sum up, a machine claw machine lift with a lifting capacity of 20 tons is a powerful tool that will meet even the most demanding industrial tasks. Its impressive load-bearing capacity and precise claw mechanism make it an invaluable support in the area of lifting and moving large loads in a variety of working environments. Technical data: Maximum static load 20T Maximum lifting capacity at the head of the lifter 15T Maximum lifting capacity at the lifting foot 12T Minimum height (foot/head) 40 / 325 mm The hight of raising 140 mm Screw pin adjustment 0-60 mm Net weight 68 kg

Condition: new, Year of construction: 2026, Constructed from high-quality materials, this lift features a solid construction, ensuring durability and reliability in extreme operating conditions. The solid frame and stable platform enable the handling of even the heaviest loads, while ensuring stability and operator safety. Thanks to advanced control systems, the operation of the 10-ton machine lift becomes intuitive and precise. The operator can easily adjust the lifting height and smoothly control the speed, which enables effective work in various conditions. The claw lift is also equipped with a screw pin on which we can also lift machines or heavy objects. The safety of use of the 10-ton machine lift is a priority, which is why it is equipped with safety systems. To sum up, the 10-ton machine lift is an irreplaceable tool for industries requiring lifting and moving large and heavy loads. Thanks to its solid construction, ease of use and priority on safety, this lift provides invaluable support in everyday industrial tasks. Technical data: Maximum static load 10T Maximum lifting capacity at the head of the lifter 7,5T Maximum lifting capacity at the lifting foot 6T Nlsdpfxsvvk Ais Amyed Minimum height (foot/head) 35 / 320 mm The hight of raising 160 mm Screw pin adjustment 0-80 mm Net weight 25 kg

Condition: excellent (used), Year of construction: 2009, Folding machine in excellent condition, changed all fold rollers, air suction feeder with alignment rail, total and batch counter, double sheet control, four manual adjustable fold plates, max. 350 x 450 (640) mm min. 85 x 120 mm fold length from 50 to 360 mm paper weights from 40 up to 250 g/m² speed up to 160m/min 230 V / 10A Nledpfspdnlhox Amyod

Condition: used, Year of construction: 2010, functionality: fully functional, Used hydraulic hose cutting machine, fully functional and currently in use. Can be inspected on site. Nlodjzphrqopfx Amyjd

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Machine configured for folding up to 16 pages. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Inverter-controlled folding speed adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Nlodpozmu Hisfx Amysd Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Nlodpezmu Hcofx Amyjd Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Condition: used, Max height: 2000mm Nlodpfx Aovpfp Domysd Max diameter: 6mm

Condition: excellent (used), Offer includes: Ti52 with 6 pockets, 2nd station with 4 pockets, Tremat feeder, very good condition, year of manufacture 2009, including SAK-52 stacking device, VFZ52 available as an option. Nljdozmp Nrepfx Amyed