Used Richard Hess Mbv Gmbh Stanzmesser Aus Vollem Stahl for sale (69,464)

Year of construction: 2024, condition: new, Punching knives eroded from solid steel Our punching knives are manufactured from selected steels and are available in a wide range of geometries and standards of all types such as ISO, DIN, JIS, ASTM, IEC. Psdekkhkuopfx Amkopt They are characterized by: - competent steel selection - material specific cutting geometry - optional equipment with various specimen ejectors and clamping spigots - individual production in different heights possible - also possible as multicutter - long tool life - excellent cutting finish - optimal cutting results - suitable for every type of press e.g. manual toggle presses, pneumatic and hydropneumatic presses

Condition: like new (used), Year of construction: 2018, machine/vehicle number: STHP 80KN, functionality: fully functional, pressing force: 8 t, table width: 300 mm, total length: 200 mm, total width: 510 mm, total height: 1,320 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Bmcbfntr with two-hand operation - floor model with and base frame Psdot Rhb Iepfx Amkept The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.

Year of construction: 2024, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio “6 knives for the price of 1” Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Psdjki Tqcspfx Amkept Guarantee for: • High-precision test specimens • Reliable and reproducible test results Ideally suited for: • High polymer materials such as rubber, plastics, etc. • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc.

Year of construction: 2024, condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber Podoiq Hxkjpfx Amkspt wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Year of construction: 2018, condition: good (used), functionality: fully functional, machine/vehicle number: H3000TM, Universal testing machine H3000TM Made in Germany Crosshead stroke: 520 mm Working area depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm / min Return speed: 500 mm / min Travel resolution: 0.01 mm We have a very large selection of clamping fixtures - screw clamping fixtures - wedge clamping fixtures - pneumatic and hydraulic clamping fixtures. Pressure plates-bending fixtures-friction fixtures and much more. Strain gauges-extensometers-long displacement transducers-clamp-on transducers-clamping chambers. Force transducers optionally 50N-100N- 200N- 500N- 1000N- 2000N- or 3000N incl. Hess software Windows 8-9-10 or 11 for universal test sequences, simple tests even without a PC and a 5KN SP 56g screw clamp with pyramid or rubber jaws 30x50 mm Factory calibration certificate with DAkkS calibrated measuring equipment. In tension and compression direction in 10 steps. The universal testing machine of the H3000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a membrane keypad. The force and travel are shown on the 2-line LCD display. The testing machine can be used as a standalone unit or with a PC via a USB interface. The displacement is measured using an encoder with 0.01 mm visible resolution on the LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travel ranges, 500 mm or 1200 mm (with load cell without test tool). Pedpfx Amot Rg H Askopt Additional scope of delivery: A load cell of your choice 50N-100N-200N-500N-1000N-2000N or 3000N, certificate 220 volt cable, USB cable, description, CE declaration of conformity. Load cell 3000N Measuring range:1-3000N tension and compression, with nom. 2mV/V Output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, reproducibility: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate

Condition: like new (used), Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Mini Rheometer – Precise Analysis of Crosslinking Behavior The Mini Rheometer is a high-precision testing device for determining the crosslinking behavior of rubber and other crosslinkable polymers. Versatile Application Options ✔ Determination of processing time for resins, cements, and adhesives ✔ Use in the dental industry ✔ Suitable for research, development, and rapid product inspection Efficient & Fast Testing The test duration matches exactly the crosslinking time of 1 g of material at the set temperature. Operating principle: Linear shear deformation according to DIN 53529 Part 1 Psdpfx Asxzrbaomkept Innovative Technology for Reliable Results ✔ Hinged measuring chamber with integrated sensor paddle ✔ Fast temperature stabilization due to the small chamber volume ✔ Dynamic measurement using sinusoidal shear loading with low amplitude and frequency ✔ Precise data acquisition via a load cell, connected to modern electronics & software ✔ Display of the crosslinking isotherm & evaluation according to DIN 53529 Part 2 Scope of delivery: Mini Rheometer, software, Windows 11 PC, volume punch

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: H50KS, tractive force with load: 50,000 N, Universal testing machine, type H50kS up to 50KN for tension and compression Load cell 50KN 10KN 1KN and Windows software 8-9-10-or 11 for tension, compression, bending, shear etc., according to EN ISO 7500-1, ASTM E4 The H50kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Pedpeq Ruw Nefx Amkspt Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode - alpha-numeric file input - speed range 0.001 to 500 mm/min. - high return speed 0.001 to 500 mm/min. - exact crosshead positioning - Robust load frame - Output report of results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check - Automatic motor alarm in case of over or under voltage and overheating Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Two-spindle table model - maximum load 50kN in tension and compression - maximum stroke 1100 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1613 mm width: 720 mm Depth: 500 mm Weight: 140 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: refurbished (used), Year of construction: 2012, operating hours: 100 h, functionality: fully functional, machine/vehicle number: H5KS, Universal testing machine, type H5kS extended version by 254 mm With 5KN 500N load cell fixture and WINdows 10-11 software for tension, compression, bending, shear etc., according to EN ISO 7500-1, ASTM E4 The H5kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode Ppedpfeq Ruygex Amkjt - alpha-numeric file input - Speed range 0.001 to 1000 mm/min ( 2.5kN ) speed range 0.001 to 500 mm/min ( 5kN ) - high return speed 0.001 to 1500 mm/min. - Precise crosshead positioning - Robust load frame - Output protocol of the results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check - Automatic motor alarm in case of over or under voltage and overheating Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Single-spindle table model - maximum load 5kN in tension and compression - maximum travel 1004 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1394 mm width: 490 mm Depth: 450 mm Weight: 102 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Year of construction: 2024, operating hours: 5 h, condition: as good as new (ex-display), 1 Hydropneumatic press type STHP 60 kN with two-hand operation - floor model with and without base frame Ppjdpfxspn Unvo Amkot The compact and handy table model has a hydropneumatic drive with pressure intensifier which can increase the punching force up to 5 times. During the working stroke, the punching cylinder is pressurised with oil by the pressure intensifier and thus has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: og5, 5m³ filling station for diesel or storage tank for heating oil or HVO (pump not included in this offer) Pedpfxjcyb E Ne Amkjpt

Condition: new, power: 238.3 kW (324.00 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,820 mm, maximum load weight: 11,990 kg, loading space length: 6,800 mm, loading space width: 2,450 mm, emission class: euro6, color: yellow, driver cabin: sleeper cab, suspension: steel-air, Year of construction: 2026, Equipment: ABS, air conditioning, airbag, cable winch, central locking, cruise control, differential lock, electronic stability program (ESP), onboard computer, DELIVERY TIME: 6 MONTHS FROM ORDER Mercedes-Benz Atego 1224 Wheelbase 4820 mm Traffic Yellow Ppedjt Hxp Iopfx Amkjt Engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm Euro 6 Rear axle air suspension LED lights Rearview camera Air conditioning Rear axle differential lock Aluminum rims 6.75 x 17.5, Dura-Bright, Alcoa Much more Miles 4021 sliding platform (hot-dip galvanized) 6800 mm x 2450 mm Technical load capacity 5000 kg Hammer cable winch 5 t Ball head trailer coupling on the winch Work lights on the flyer and rear Strobe light on the flyer Stainless steel tool boxes Shovel and Broom Trash can Drag pulleys NATO sockets 12-channel radio remote control for platform and winch Hydraulic box Lifting frame 3.5t Aluminum step plates on the platform Side step plates for easier access to the platform

Condition: used, Year of construction: 2017, working width max. 240 mm Sanding height max. 140 mm weight ca. 2200 kg Ppsdpjxwtwujfx Amkjt

Condition: used, Technical details: plate thickness: 1 mm distance between columns: 2,255 mm bending angle max.: 130 ° total power requirement: 2,25 kW Weight approx.: 1400 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Pjdpfewq I U Rjx Amkept Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is missing manual operation O.K. No backgauge *

Condition: used, Year of construction: 2023, operating hours: 22 h, functionality: fully functional, machine/vehicle number: 61035145, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 393 cm³, injection pressure: 2,429 bar, injection weight: 140 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 120 mm, opening stroke: 950 mm, installation height: 450 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 6,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you here our certified and highly flexible stock machines: The base model injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, user-friendly operation, and short lead times. It is suitable for a wide range of applications, including packaging, electrical and electronics industries, medical technology, and automotive manufacturing. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Meeting demanding delivery schedules with a base machine concept offering a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM ▪ MC P1 with 15" TFT colour screen and multitouch functionality CLAMPING UNIT ▪ Clamping force: 1,200 kN ▪ Maximum mould opening force: 180 kN ▪ Clear space (h x v): 520 x 470 mm Pjdpfxey Rmwds Amkjpt ▪ Mounting platen (h x v): 690 x 640 mm ▪ Mould installation height min. - max.: 180 - 450 mm ▪ Maximum opening stroke: 850 mm ▪ Maximum mould opening path: 450 mm ▪ Ejector drive: electric ▪ Ejector stroke: 120 mm ▪ Ejector force forward/backward: 27 / 33 kN ▪ Ejector speed forward/backward: 300 / 300 mm/s ▪ Maximum mould weight: 850 kg INJECTION UNIT ▪ Screw diameter / type: 35 mm / standard ▪ Effective L/D ratio: 22.9 ▪ Injection pressure: 2,429 bar ▪ Stroke volume: 154 cm³ ▪ Shot weight at max. stroke (for PS): 140 g ▪ Injection speed: 200 mm/s ▪ Injection flow rate: 192 cm³/s ▪ Screw drive / rotation speed: 374 rpm ▪ Plasticising rate (standard screw): 18.9 g/s ▪ Nozzle contact force: 34 kN ELECTRICAL PARAMETERS ▪ Connected load: 22.7 kW ▪ Installed heating power: 11.5 kW ▪ Power supply: 200 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS ▪ Net weight with control cabinet: 6.7 t ▪ Length x width x height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT ▪ Wear-resistant plasticising unit ▪ BluePower full insulation for plasticising cylinder ▪ Open nozzle ▪ Air valve, single (BWAP) ▪ Pneumatic hot runner shut-off control, single ▪ Electrical interface for pneumatic cascade, 4-fold ▪ Euromap interface for handling: E18 + E67 ▪ Euromap central computer interface: E67, E77 ▪ Water manifold, 4-fold ▪ Electrical provisions for hydraulic auxiliary unit ▪ Automatic central lubrication ▪ Adaptive Process Control (APC) ▪ Injection-compression moulding mode ▪ Graphic analysis package ▪ Swivelling injection unit The machine is located at our Parsdorf facility and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: used, Year of construction: 2006, operating hours: 1,609 h, functionality: fully functional, machine/vehicle number: 61008195, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, injection pressure: 2,500 bar, injection weight: 183 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 750 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The fully hydraulic CX series features particularly compact, efficient, and flexible two-platen machines. The very compact two-platen concept with cantilevered clamping provides generous space for peripheral equipment and optimal accessibility. Efficient and intelligent energy management with BluePower servo drive provides a powerful foundation to meet the highest demands and delivers the right solution for every application. Ppjdpfxsy Rlmws Amket TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM • MC6 with TFT colour touchscreen with multitouch functionality CLAMPING UNIT • Clamping force: 800 kN • Max. mould opening force: 55 kN • Clear space (h x v): 470 x 420 mm • Mounting plate (h x v): 670 x 670 mm • Minimum - maximum mould installation height: mm (specify values if known) • Maximum daylight: 750 mm • Maximum mould opening stroke: 500 mm • Ejector drive: hydraulic • Ejector stroke: 150 mm • Ejector force forward/backward: 23/10 kN • Ejector speed forward/backward: 760 / 800 mm/s • Maximum mould weight: 1000 kg INJECTION UNIT • Screw diameter/type: 40 mm / Standard (adaptable) • Effective L/D ratio: 20 • Injection pressure: 1860 bar • Stroke volume: 201 cm³ • Shot weight at max. stroke for PS: 183 g • Injection speed: 100 mm/s • Injection flow rate: 126 cm³/s • Screw drive/speed: 295 rpm • Plasticizing rate (standard): 12.3 g/s • Nozzle contact force: 50 kN ELECTRICAL PARAMETERS • Connected load: 15.0 kW • Installed heating capacity: 10.9 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 3.55 t • Length x width x height: 3.96 x 1.48 x 2.02 m ADDITIONAL FEATURES • Wear-resistant plasticizing • BluePower full insulation for plasticization cylinder • Open nozzle • 1 additional heating circuit for nozzle heating • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Hydraulic core pull, single (BWAP) • Euromap interface for handling: E18, E63 • Euromap interface (central computer): E67, E77 • Adaptive Process Control (APC) • Injection-compression mode • Graphical analysis package The machine is located at our factory in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, The subject of this offer is a compact Mini Rex Futura roll dividing and rounding machine, known for its high efficiency and wide weight range while maintaining excellent dough processing quality. Ppjdpfxjy Angqe Amkjt MACHINE DESCRIPTION Mini Rex Futura roll divider-rounder, year 2011. Manual dough loading into the hopper 2-row operation Manual removal of products from the discharge belt Performance: 33 cycles/min; 3960 pcs/h Weight range: L: 25g – 75g; H: 70g – 140g Control panel Dough types: wheat, graham, yeast dough, donuts Single-operator control Machine dimensions (H x L x W): 1800 x 1770 x 650 mm Availability: Expected refurbishment completion: end of May this year. Sample photo of a similar machine after complete overhaul at Cream Serwis. Contact us for a price quotation and more details.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, The subject of this offer is a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. Designed for producing the following types of rolls: • Round stamped rolls • Elongated unstamped rolls • Sliced rolls • Twisted rolls • Kaiser rolls • Hot dog rolls • Poznań rolls Product description: • Fully automatic and compact bun production line • Based on a rotary Mini Rex Futura divider-rounder from 2009 Psdpfx Aoy And Njmkept • 2-row operation • Manual removal of products from the discharge conveyor • Stamping station with easily interchangeable tools; includes Kaiser and Corinthian stamping heads • Integrated elongation and flattening unit • Weight range: - For stamped rolls: dough piece weight from 25g to 75g – output: 1,800 pcs/h to 2,640 pcs/h - For unstamped rolls: dough piece weight from 80g to 125g – output: 1,800 pcs/h to 3,960 pcs/h • Proofing time: approx. 6 minutes at an output of 2,000 pcs/h • Dough types: wheat, graham, yeast, doughnuts • Single-person operation The machine is currently undergoing a general overhaul, which is expected to be completed by mid-June 2026. The photos show a similar bun line after a complete overhaul at Cream Serwis. If you are interested in pricing or would like to receive more photos, please contact us.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036679, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT Ppjdpfx Aoyzz Iremkjt • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use. Ppsdoxb Ucaepfx Amket

Condition: good (used), Used stainless steel container / transport container / IBC Final use: Chemicals Tank cleaned and with hazardous goods approval up to 10/22 Item number: 10495 Podjflrhqspfx Amkjpt Volume: 500 litres Type: Standing in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall Base: Vaulted Topsoil: Vaulted Operating pressure according to type plate: +0.1 Bar Tank dimensions: total width: 1200mm total length: 1000mm total height: 1000mm materials: Interior: 1.4301 / AISI 304 Exterior parts: Galvanized steel facilities: Nameplate: Yes diameter outlet: approx. 70mm Outlet Type: Disc valve Outlet valve: Yes Manhole cover 400mm with clamping ring

Condition: good (used), Used stainless steel transport container / silo Number of pieces: 17 Item number: 10440 Last use: Unknown Capacity: 650L Type: Standing in galvanized frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall bottom: conical bottom Topsoil: Vaulted Operating pressure according to type plate: ATM Tank dimensions: distance drain to floor: 250mm total height: 1655mm total width: 830mm total length: 1030mm materials: Ppjdpfod Sw Dfsx Amkjt Interior: 1.4301 / AISI 304 Outside: Galvanized steel facilities: Nameplate: yes Discharge: DN80 Outlet valve: Camlock Top panel completely removable

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, Psdpsri Sicsfx Amkjpt - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT Ppsdpfxoud H Dms Amkjt  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0 Podpfxeud N Hdj Amkspt  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s Ppedjw U N Ixepfx Amkot - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.