Used Reckermann Uni 900 Pony for sale (12,274)

Condition: ready for operation (used), Year of construction: 1969, x-travel 700 / 710 mm y-travel 275 mm z-travel 350 mm taper in main spindle ISA 40 table surface area 900 x 250 mm T-slots 3 x 18 x 60 Stk. turning speeds 32.0 - 2000 U/min feed stepless 15 - 750 mm/min voltage 400 V total power requirement 4.0 kW weight of the machine ca. 1400 kg range L-W-H 1000 x 1400 x 1800 mm from a training workshop (vocational school) - in checked conditions - machinevideo - ?v=fKENsjnLZxY Features: - Robust, electric-motor-driven universal milling machine - With horizontal and vertical main spindles * Vertical main spindle can be swiveled 360° in two planes - Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control Isdjzkbnzjpfx Ahysih - Stepless speed adjustment - Swiveling machine light - Control cabinet, installed on the right - Original operating instructions Machine data sheet

Year of construction: 1983, condition: good (used), 1 Console milling machine Manufacturer: RECKERMANN, Type: KOMBI 900, Year of manufacture: 1983, Serial number: 6367P, Table size: 1,000 x 310 mm, Travel range X/Y/Z: 720 x 220 x 450 mm, Tool holders: SK 50, Heavy-duty machine vise, Iijdpoh E Du Djfx Ahyeh Spindle speeds: 3...2800 rpm

Condition: good (used), Year of construction: 1981, Table size 1300 x 400 mm Tool holder DIN 2080 ISO 40 Travel ranges X-axis, automatic/manual 1000 / 1020 mm Y-axis, automatic/manual 350 / 370 mm Z-axis, automatic/manual 430 / 450 mm Speed range, 2 steps 32 – 1400 rpm Quill in vertical milling head yes Milling head, swiveling ± 90° Feed range X/Y-axis, stepless 10 – 1000 mm/min Feed range Z-axis, stepless 4 – 400 mm/min Rapid traverse X/Y-axis 5 m/min Rapid traverse Z-axis 1.8 m/min Iodpfsd D Tf Hjx Ahyoih Drive power, vertical + horizontal 3.2/4 kW Space requirement L x W x H 3200 x 2700 x 2200 mm Weight 2400 kg Accessories / Special features: • NC point-to-point control HEIDENHAIN TNC 131 S • RS 232 interface • Stepless feed • Automatic and/or manual operation possible • Safety devices / prompts to secure the hand crank when the X-Y and Z axes are moved manually, as well as the manual tool clamping • Vertical and horizontal milling spindle • Quill in vertical milling head • Hydraulic axis clamping • Central lubrication • Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, mileage: 14,000 km, power: 81 kW (110.13 HP), first registration: 12/1978, fuel type: diesel, overall weight: 6,500 kg, color: green, gearing type: mechanical, Year of construction: 1978, Equipment: all wheel drive, trailer coupling, U 900 Cabrio, fully restored, like new Tires: 405-70 / 20 Rear power lift Transmission: 6-speed dual-clutch Crawl gears Tilting cylinder Optional hardtop Iijdsi R Ainepfx Ahysh Power take-off (PTO) Transfer gearbox Archive images, vehicle under construction First owner: Aviation Group

Condition: used, Year of construction: 1987, x-travel 720 mm y-travel 220 mm z-travel 450 mm table surface area 1000x310 mm weight of the machine ca. 1.500 kg dimensions of the machine ca. 2000x1200x1800 mm Isdpfx Ahsyv N Hxsysih

Condition: good (used), Year of construction: 1998, Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-maintained environment and impresses with the renowned Mikron precision and generous work area (up to 900 mm travel in X). It is ideally suited for toolmaking, prototype construction, training, or demanding repair workshops. Technical data at a glance (manufacturer's specifications): Work area & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Ijdozcqcgepfx Ahysih Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Work table (rotary table): Clamping surface: 600 x 1,200 mm T-slots: 9 pieces (14-H7, spacing 63 mm) Max. table load: 500 kg Electrical system, dimensions & weights: Connected power: Total installed rated power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150 liter capacity Machine weight: approx. 4,300 kg (incl. safety cabin) Product video “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), functionality: unexamined, Manufacturer Reckermann Milling Machines GmbH, Solingen Model Kombi 1000 Year of Construction 1990 Professional Sales Description for Machine Seekers Reckermann Kombi 1000 Universal Knee-Type Milling Machine | Year of Construction 1990 | 3-Axis Digital Readout | SK40 For sale is a high-quality universal knee-type milling machine, the Reckermann Kombi 1000, built to robust German industrial standards. This machine is ideally suited for tool and mold making, mechanical engineering, training workshops, as well as repair and maintenance shops. Thanks to its stable cast iron construction, horizontal and vertical milling capabilities, and the retrofitted 3-axis digital readout, it offers high precision and versatile applications. The well-maintained overall condition and the year of construction, 1990, make this machine particularly attractive for companies looking for a durable conventional milling machine. Equipment Manufacturer: Reckermann Type: Kombi 1000 Year of Construction: 1990 Universal knee-type milling machine Horizontal and vertical milling capabilities 3-axis digital readout (DRO) Automatic feeds Rapid traverse in all axes Coolant system Central lubrication Robust gray cast iron construction German quality machine Technical Data Feature | Value Table size | 1,370 × 400 mm Travel X | 1,000 mm Iisdjziuc Aspfx Ahyeh Travel Y | 350–390 mm Travel Z | 430–450 mm Tool holder | SK40 Spindle speed | 48–2,100 rpm Gear stages | 16 Feed | 10–1,000 mm/min Rapid traverse X/Y | 5,000 mm/min Rapid traverse Z | 2,000 mm/min Main motor | approx. 7.5 kW Max. workpiece weight | 500 kg Machine weight | approx. 3,800–4,000 kg Condition Used Very well-maintained overall condition Retrofitted with digital readout Coolant system included Sold as pictured Inspection and functional testing possible by arrangement Application areas Toolmaking Mechanical engineering Mold making Jig and fixture construction Training workshops Repair and maintenance businesses Single and small series production

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Iisdpjwzl Hxsfx Ahyoh Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Iiedjxa H Ewjpfx Ahysh Do you have any questions or suggestions? We are happy to assist you.

Condition: excellent (used), Year of construction: 2019, For sale are the following functional and well-maintained oil burners: 1. Iedpoy Uvhtofx Ahysih Burner type: WM-L10/3-A, MULTIFLAM Output: 200 - 900 kW 17-75 kg/h Design: T-3LN Year of manufacture: 2019 2. For sale is a functional and well-maintained oil burner from Weishaupt, model WM-GL10. It was only used with oil, therefore it does not have a gas line. Burner type: WM-L10/3-A Output: 110 - 1000 kW 15 - 84 kg/h Design: ZM-T Year of manufacture: 2007 3. For sale is a functional and well-maintained oil burner from Weishaupt, model RL3-A. Burner type: RL3-A Output: 120 - 775 kW 10 - 65 kg/h Design: ZMD Year of manufacture: 2002

Condition: ready for operation (used), Year of construction: 2003, Available immediately ex-works: Reckermann 3-axis machining center Type VMC 105 E Year of manufacture 2003 Iodpfjz R Nu Nsx Ahyeih Heidenhain TNC 410 M 20-tool changer SK 40 tool holder Spindle speeds up to 8,000 rpm Drive power 7.5 / 11 kW Table size 1520 x 515 mm Travel distances X/Y/Z 1050/560/520 mm Feed rate 1 – 5000 mm/min Rapid traverse rates up to 15,000 mm/min Weight 4 tons Accessories: vices, tool holders Electronic handwheel Price: Euro 8,500.00 plus VAT ex-works.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: Iedowzmcbepfx Ahyeih • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, with Dungs gas piping DN 50 Burner type: WM-G10/3-A Design: ZM-LN Iiodpfjzdku Rex Ahysh Year of manufacture: 2011 Output: 125-900 kW

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: KITE Type: Shirt finishing machine Year of manufacture: 2024 Used, with minor signs of wear, in good condition Iedpfx Ahjz Ibdusysih (the fabric of the dummy attachment has a small tear on the left side) Without power plug From a business liquidation Technical data according to the manufacturer: With air blast technology for ironing dress shirts, women's blouses, and polo shirts Steam-heated SMALL dummy attachment Shirt tensioning slide, photocell for automatic positioning Automatic device for lateral tensioning of the shirt Semi-automatic front pressing bar, with pneumatic closure Two sleeve tensioning clamps, height-adjustable by gas spring Anatomical attachment of the sleeve in an oval shape, suitable for long and short sleeves Hot air recovery system Touch screen - PLC control for storing programs, diagnostics & programmed maintenance Adjustable feet Mirror Electrically heated 400V/50Hz connection Fan motor: 1.5 kW Extraction motor: 0.25 kW Dimensions (W x D x H): approx. 198 x 126 x 230 cm Weight: 360 kg Accessories: electric ironing unit Inspection or collection is possible by appointment.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: MPT-DL Type: Trouser press Year of manufacture: 2024 Used, with minor signs of wear, in good condition From a business liquidation Technical data according to the manufacturer For example, for jeans, sports pants, and classic trousers Prepared for connection to an external steam source With pneumatic waistband and trouser leg clamping Transverse/perpendicular waistband clamping With microprocessor and display with 10 storable programs, automatic and adjustable cycles, to be activated when the left trouser leg clamp is closed, or via foot pedal if the slider of the trouser leg clamping device is switched off or not available 1.7 HP fan Prepared for connection to compressed air Iisdpfx Ahez Ibfljyoh Photoelectric cell Connection: 400 V / 3+N / 50 Hz Dimensions (W x D x H): approx. 80 x 90 x 200 cm Weight: 150 kg Inspection or collection is possible by appointment.

Condition: used, Year of construction: 2012, table-size 1700 x 925 mm taper ISO 50 tool change unit 32 Fach speeds: 60 – 6000 U/min x-travel 1520 mm y-travel 800 mm z-travel 680 mm Iedpezy Si Isfx Ahyoih workpiece dia. max. 2000 kg machine weight ab. 16000 kg dimensions of the machine ca. 6000 x 3600 x 3600 mmxmmxmm

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex location: CNC universal milling machine Reckermann Type: Primo II Year of manufacture: 1996 Heidenhain TNC 430 control Spindle taper SK 50 Infinitely variable spindle speeds: 20 – 2,000 rpm Table load capacity: 1,000 kg Stepless feed rates: 20 – 6,000 mm/min Travel (X / Y / Z): 1,000 / 400 / 350 mm Iodpfxez Ixk Es Ahysih Drive: 7.5 kW Weight: 4 t Price: EUR 2,500 plus VAT, ex location

Condition: good (used), For sale: CRATHERN, PERONDI IA630, with a capacity of 900. Iodpjz Sat Eefx Ahyeih

Condition: used, Year of construction: 2019, machine/vehicle number: 269913, functionality: fully functional, power: 0.5 kW (0.68 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, total length: 1,140 mm, total width: 1,380 mm, total height: 1,440 mm, overall weight: 230 kg, Equipment: CE marking, PONY BP-B Professional Garment Press (2019) Industrial Steam-Pneumatic Press for Trousers, Waistbands & Structured Garments The PONY BP-B is a professional industrial garment pressing machine manufactured by PONY S.p.A., Italy in 2019. Designed for continuous production environments, this steam-pneumatic press delivers high-quality finishing for trousers, waistbands, jackets, coats, and other structured garments. The machine combines steam, compressed air, and an integrated vacuum system to produce consistent, wrinkle-free finishing results with high productivity. The machine has been used in professional garment manufacturing and remained fully operational until the factory shutdown. Technical Specifications • Manufacturer: PONY S.p.A. • Model: BP-B • Year: 2019 • Serial Number: 269913 • Country of Manufacture: Italy • Power Supply: 230 V, Single Phase, 50 Hz • Power Consumption: 0.5 kW • Working Steam Pressure: Up to 5 bar • Pneumatic Operation: External compressed air required • Vacuum System: Integrated Lowara vacuum unit • Weight: Approximately 230 kg Key Features • Professional steam-pneumatic garment press • Integrated vacuum extraction system • Steam-heated pressing head and buck • Designed for trouser tops, waistbands, jackets, and structured garments • Adjustable pneumatic pressing pressure • Foot pedal operation • Dual safety hand controls • Emergency stop button • Heavy-duty industrial construction • Suitable for continuous production environments • Includes • PONY BP-B garment press • Integrated Lowara vacuum system • Steam and pneumatic connections • Foot pedal controls • Industrial cabinet base • Safety guards • Electronic controls Iiodpfx Ahszkhy Rsyjh Applications • Trouser finishing • Waistband pressing • Jacket finishing • Coat finishing • Workwear production • Garment manufacturing • Commercial laundries • Textile finishing departments Condition • Fully functional • Previously used in professional garment production • Serviced on 27.02.2026 • Video recorded in operation on 05.03.2026 • Good industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, compressed air, and electrical connections, dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's industrial utility connections. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Year of construction: 2020, condition: used, A CNC universal bed-type milling machine is offered. Table setup area: approx. 1300mm, operating hours: approx. 100h, spindle hours S1: 54h, program run time: 159h, control: HEIDENHAIN TNC 320, operating voltage: 400V, total rated current: 50A, fuse rating: 63A, spindle speed: 32-1400rpm, control: HEIDENHAIN TNC 320. Equipped with full enclosure, coolant system, work area lighting, chip guard. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3910mm/2700mm/2800mm. Inspection by prior arrangement is possible. Iiodpfxjz Agggo Ahyeh

Condition: used, Year of construction: 1978, x-travel 100 mm y-travel 200 mm z-travel 450 mm Ijdpfxsz Rqpaj Ahysih taper ISO SK 40 turning speeds 22 - 1400 U/min total power requirement 7,5 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 1,8 x 2 x 1.85 m 3-axis digital readout - Rapid traverse - Documentation

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3/UE/21/Z, tank capacity: 900 l, total length: 2,000 mm, total width: 1,190 mm, total height: 1,050 mm, inner diameter: 1,000 mm, overall weight: 740 kg, wall material: stainless steel, number of chambers: 1, operating temperature: 100 °C, input voltage: 380 V, input current: 42 A, Has been used for cooking up sirup and marmelade. Well function and in good shape. Iiedpfx Ahjz Sy N Eoysh

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3/UE/21/Z, tank capacity: 900 l, total length: 2,000 mm, total width: 1,190 mm, total height: 1,050 mm, inner diameter: 1,000 mm, overall weight: 740 kg, wall material: stainless steel, number of chambers: 1, operating temperature: 100 °C, input voltage: 380 V, input current: 42 A, Has been used for cooking up sirup and marmelade. Well function and in good shape. Iisdpfx Asz Sy Izshyeh

Year of construction: 2012, condition: excellent (used), machine/vehicle number: M 5046 Typ 101 000 432, Embossing calender for roll-to-roll processing (100 m/min) Sheet material can also be processed; separate feeding tables are included. Exchangeable cylinder (fine linen embossing pattern) The machine is in very good condition and has few operating hours. Machine manual / operating instructions. Iiedpfxehr Rlys Ahyjh

Condition: good (used), Year of construction: 1996, Reckermann Kombi 1050 Console Milling Machine Reckermann Kombi 1050 with Heidenhain TNC 124 Control, Year of Manufacture 1996, in good CONDITION The machine comes from the training department of a renowned German mechanical engineering company. It was retired because its size was not suitable for the standard applications. Technical Data: Console Milling Machine RECKERMANN Model Kombi 1000 Year of Manufacture 1996 Control Unit: TNC 124 Heidenhain Technical Specifications: X-axis travel: 1,000 mm Y-axis travel: 350 mm Z-axis travel: 450 mm Distance spindle center to column: 50 - 500 mm Distance spindle center to table: 0 - 450 mm Table height above floor: 850 - 1,300 mm Clamping surface: 1,570 x 400 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 70 mm Max. workpiece weight: 500 kg Tool holder: SK 40 Spindle speed range: 48 - 2,100 rpm Spindle drive power: 6.1 / 7.4 kW Number of gear steps: 16 Rapid traverse X-axis: 5 m/min Ijdpsx N Euxjfx Ahyeih Rapid traverse Y-axis: 5 m/min Rapid traverse Z-axis: 2 m/min Feed rate: 10 - 1,000 mm/min Feed force: 22 Nm Total connected load: 400 V Machine weight: approx. 4.0 t Space requirement: approx. 3.3 x 2.2 x 2.2 m Accessories and Equipment: - Heidenhain TNC 124 control unit - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels, coolant system, spindle brake About the Machine: Offered here is a console milling machine Reckermann Kombi 1050 with Heidenhain TNC 124 control, year 1996. This universal milling machine is in very good original condition. It comes from a facility where it was only used occasionally for training purposes. The control system is very user-friendly. The machine is equipped with hydraulic clamping in both vertical and horizontal positions. Conversion from vertical to horizontal operation is straightforward thanks to the swiveling vertical head. The guides are consistently lubricated with the central lubrication system. The Reckermann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Reckermann under power at our premises. You can find further milling machines from renowned manufacturers on our website.