Used Rausch Rs6/1000 for sale (8,437)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Hövelhof
18,428 km
Vertical internal broaching machine
RauschRS6/1000
Call
Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 60305, General / technical data:
Manufacturer: Rausch
Type: RS6 / 1000
Year of manufacture: 07/2000
Machine-No.: 60305
weight: approx. 750kg
Tractive force: 60kN (80kN)
clearing speed: 4m/min
return speed: 8m/min
max. stroke: 1000mm
Hnedpfsiqkb Rjx Agmen
maximum tool length: 1200mm
maximum workpiece diameter: Ø approx. 900mm
table opening: Ø 90mm for standard broaching mandrels
Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to floor without superstructure).
type of power: 400 Volt / 50Hz - 6 / 7,5kW
Accessories/ optional equipment:
- electrical scanning of the clamping jaws (tool removal control to prevent against
unintentional retraction of the drawbridge)
- integrated coolant system with check valve and drain cock
- patented coolant/lubricant swivel system (retrofitted)
Remark:
The machine has the manufacturer CE marking.
The machine is under power in our warehouse and can be inspected.
Listing
Ennepetal
18,536 km
Broaching Machine-Internal - Vertical
RAUSCHRS6/1000
Call
Condition: used, Year of construction: 1972, pulling force - max. 6 t
max. ram stroke 1000 mm
Hodpeyif Nljfx Agmenn
max. workpiece diameter 350 mm
table-size 610 x 470 mm
working area 520 x 320 mm
work speed 3 + 5 m/min
return speed 10 m/min
tool length - max. 1200 mm
table hole 90 mm
total power requirement 8,2 kW
weight of the machine ca. 1 t
dimensions of the machine ca. 1 x 1 x 1,8 m
Machine comes with accessories, such as holders and broches.
Listing
Hövelhof
18,428 km
Vertical broaching machine Rausch RS
RauschRS 6 /1000
Call
Year of construction: 1973, condition: refurbished (used), machine/vehicle number: 5116/447, machine type: vertical internal broaching machine
manufacturer: Rausch (Haan/Rhld)
Hnsdpfx Agogw Hvcjmjn
type: RS 6/1000
built in: 1973
totally rebuild in: 3/2021 by WiemersAG
weight: 800kg
pulling force: 60kN (80kN)
broaching speed: 3m/min & 5m/min
return speed: 10m/min
maximum stroke: 1000mm
maximum tool length: 1200mm
table size /work surface: 610mm x 470mm (520mm x 320mm)
working stations: 1 pcs
drive: mechanic drive system
engine: 5,5kW / 8,2kW / 8,2kW
power supply: 400Volt/ 50Hz
equipment: coolant system
remark: machine under power in stock
optional accessories available on request: tools, workpiece holder
More detailed technical informations in the datasheet (german) in the annex.
Information about us:
we are specialized for second hand broaching machine and still have anytime about 80 pieces of used broaching machines in our stock, vertical and horizontal machines from 3000kg up to 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing
Bruchsal
18,631 km
Broaching machine / RAUSCH RS 6-1300
RAUSCHRS6/1300
Call
Condition: ready for operation (used), Pulling machine RAUSCH RS 6-1300 with extensive accessories
Hodpfx Ageza U Alsmsnn
-Ram stroke / pulling length 1300mm
-Pulling force 6000kg
-Incl. 38x clearing pins
-Incl. 95x guide bushings
-Work bench
-Setting plates
-Crane
-Platform
-2x tool cabinets
Dimensions: L x W x H 1.6 x 1.7 x 2.3 meters / Weight: 2500kg
Errors and omissions excepted.
Listing
Hövelhof
18,428 km
Broaching machine
RauschRS 4 / 1000
Call
Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld)
Model: RS 4/1000 Machine No.: 5027
Year of manufacture: 2001/2023 Weight: 580 kg
Overhauled: 3/2023 by Wiemers AG
Hnsdpfx Agow H Dgnsmen
General / Technical Data:
Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification
Pulling force: 40 kN (4,000 kg)
Broaching speeds: 3 m/min and 6 m/min
Return speed: 6 m/min
Maximum stroke: 1,000 mm
Maximum tool length: 1,200 mm
Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm
Table opening: Ø 90 mm for standard broaching mandrels
Workpiece diameter: unlimited
Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin)
Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz
Accessories / Special equipment:
- Drive with 2 speeds
- Safety door with interlock and chip chute
- Chip chute with tool storage
- Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge)
- Integrated coolant system with solenoid valve (controlled via swing system)
- Patented coolant/lubricant swiveling system
- Externally adjustable tool length setting system (reproducible across multiple machines)
- 4 central lubrication points for the trapezoidal spindle drive
- Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools)
- 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching)
- External control panel (connected via Harting plug connector)
Remarks:
The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced:
- New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze
- All bearings and seals replaced
The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new
- Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system
- The drawbridge as well as the clamping jaws and rack segments are new
- A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage)
- A safety door with interlock, signal display, and door lock
- The tool length adjustment system has been relocated outside the machine compartment
- Additional end-position limit switches have been installed
- Complete new electrical system (control cabinet)
- No PLC installed, machine is electrically maintenance-friendly
- New drive motor (SEW Germany) with brake
- The machine has been freshly painted with 2-component structural paint
General
The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min).
By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting.
Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.
Listing
Hövelhof
18,428 km
Vertical broaching machine Rausch RS
RauschRS 3 /1000
Call
Year of construction: 1993, condition: refurbished (used), machine/vehicle number: 3694/895, machine type: vertical internal broaching machine
manufacturer: Rausch
type: RS 3/1000
built in: 1993
totally rebuild in: 5/2021 by WiemersAG
weight: 400kg
Hodpfjgw Hvnjx Agmjnn
pulling force: 3.000kg (30kN)
broaching speed: 3m/min & 6m/min
return speed: 6m/min
maximum stroke: 1000mm
maximum tool length: 1200mm
table size /work surface: 430mm x 320mm (340mm x 220mm)
working stations: 1 pcs
drive: mechanic drive system
engine: 2,5kW/ 3kW
power supply: 400Volt/ 50Hz
equipment: coolant system
remark: machine under power in stock
optional accessories available on request: tools, workpiece holder
More detailed technical informations in the datasheet (german) in the annex.
Information about us:
we are specialized for second hand broaching machine and still have anytime about 80 pieces of used broaching machines in our stock, vertical and horizontal machines from 3000kg up to 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.
Listing
Wald
18,661 km
Broaching machine, vertical - broaching machine
RauschRSIZ 6 / 1000 S
Call
Condition: ready for operation (used), Vertical - broaching machine Rausch
Type RSIZ 6 / 1000 S
Condition is used
technical data:
Working range : up to 1000 mm
Cutting speed 3 to 5 m/min
Return speed 10 m/min
Interior: largest workpiece diameter 600 mm
Outer chambers: area of the clamping plate 600 x 340 mm
Coolant device
Tensile force measuring device
Automatic central lubrication
Spindle protection by spring band spirals
Chip conveyor
shut-off counter
Dimensions: 1.05 m x 0.9 m x 4.3 m
Weight 1200 kg
Self-collection or forwarding. We will be happy to help you organize an inexpensive forwarding agent.
You are welcome to visit us for a viewing.
You will receive a proper invoice.
A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number.
Hnodsdyp Rmepfx Agmon
Subject to prior sale.
Company names and trademarks are the property of their owners and serve only to identify and describe the products.
The machines and tools are sold as is.
The installation and electrical connection of the machine/device must be carried out or checked by a trained specialist.
Deviations from technical data and errors in the description of the item may occur and are reserved.
Listing
Hövelhof
18,428 km
Broaching machine
RauschRS 6G
Call
Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine
Manufacturer: Rausch (Haan/Rhineland)
Model: RS 6G / 1000 Machine No.: 51039/373
Year of manufacture: 1968 Weight: 800 kg
Revision: December 2024 by Wiemers AG
General / Technical Specifications:
Completely overhauled, mechanical vertical broaching machine
Rausch RS 6G, unused with "CE" marking
Tensile force: 60 kN (6,000 kg)
Hnsdsv Rmvzopfx Agmsn
Broaching speeds: 3 m/min and 6 m/min
Return speed: 6 m/min
Max. stroke: 1000 mm
Max. tool length: 1200 mm
Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm
Table opening: Ø 90mm for standard broaching mandrels
Workpiece diameter: any
Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments)
Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz
Features:
- Geared motor drive with 2 working speeds
- Reinforced drawbridge made of tool steel for greater pulling forces
- Safety door with automatic door locking and safety interlock
- New chip chute with tool storage option
- Protective cover for the stroke adjustment
- Oil-tight storage on the control cabinet
- Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools)
- Integrated coolant system with electrically switched solenoid valve and drain cock
- Coolant swivel system, with automatic coolant switching via the swivel system
- Chip sieve with magnet
- Externally adjustable tool length adjustment system (reproducible across all machines)
- Stainless steel control panel with durable markings
- 4 central lubrication points for the trapezoidal spindle drive with manual grease gun
Note:
The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations.
The machine is marked with a CE certificate.
General
The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min).
Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways.
The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads.
Broaching tools and broaching mandrels suitable for the machine are available on request.
Listing
Hövelhof
18,428 km
Broaching machine
Rausch RäummaschineRS 6 G
Call
Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld)
Model: RS 6/1000
Machine No.: 51261
Year of Manufacture: 1978
Weight: 680 kg
Overhauled: 11/2024 by Wiemers AG
General Information / Technical Data:
Overhauled mechanical vertical broaching machine Rausch RS 6 G
Pulling force: 60 kN
Hsdow Ighijpfx Agmenn
Broaching speeds: 3 m/min and 6 m/min
Return speed: 6 m/min
Maximum stroke: 1000 mm
Maximum tool length: 1200 mm
Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm
Table aperture: Ø90 mm for standard broaching mandrels
Workpiece diameter: unlimited
Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments)
Motor: 4.4 kW / 5.5 kW
Power supply: 400 Volt / 50 Hz
Additional modifications/upgrades to the original machine performed:
- External stroke adjustment
- New, machine-independent, reproducible tool length adjustment system
- Additional limit switches for end position monitoring
- Safety door with monitoring (integrated in the emergency circuit)
- Machine enclosure below safety door with chip protection and tool storage area
- Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge)
- Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!)
- Routing of electrical cables in protective steel conduits
- Heavy-duty control cabinet mounting for machine components
- Additional oil-proof drip tray on the control cabinet
- Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm)
- Reinforced chip screen with magnetic separator
- Control panel made of stainless steel with durable labeling
- 4 central lubrication points for trapezoidal spindle drive
Remarks:
The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced.
- New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze
- All bearings and seals renewed
- The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new
- The clamping jaws are new
- Complete electrical system (control cabinet) is new
- All sheet metal and enclosures are new
- The following components have been overhauled and re-used:
- Machine base
- Machine column
- Machine table with table insert
- Broaching bridge (clamping jaws new)
- Gear wheels
- Electric motor (new brake, new bearings)
The machine is stored in our warehouse and can be inspected under power.
The attached images are original photos of the machine.
The machine is CE marked.
The CE marking corresponds to the status as of 1998 (first overhaul).
Listing
Hövelhof
18,428 km
Broaching machine
Rausch RaeummaschineRS3, RS4, RS 6
Call
Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, input voltage: 400 V, broaching length: 1,000 mm, Manufacturer: Rausch
Model: RS3 /1000
Machine No.: 3714/1070
Year of Manufacture: 1995
Weight: 400 kg
Overhaul Due: 04/2025 by Wiemers AG
General / Technical Data:
Unused, fully overhauled mechanical vertical broaching machine Rausch RS 3, with CE marking
Pulling force: 3,000 kg
Broaching speeds: 3 m/min & 6 m/min
Return speed: 6 m/min
Maximum stroke: 1,000 mm
Maximum tool length: 1,200 mm
Table size / workspace: 430 mm x 320 mm / 340 mm x 220 mm
Table opening: Ø 90 mm for standard keyway broaches "Rausch system"
Workpiece diameter: unlimited (removable coolant swiveling system)
Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shank)
Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided safety enclosure)
Motor: 2.5 kW / 3.0 kW
Power supply: 400 Volt / 50 Hz
Features:
- Gear motor drive with 2 working speeds
- Safety door with interlock system (emergency stop circuit)
- Easily removable chip chute with tool rest
- Externally adjustable tool length setting system (Rausch system)
- Protective covers for stroke adjustment and electrical switch gear
- Electrical sensing of clamping jaws (tool removal check prevents unintentional return of the pull bridge, adding extra safety for operator and tool)
- Integrated coolant system
- Coolant swiveling system (without electrical switching function)
- Three-sided splash guard enclosure with wide front opening for working area
- Extra reinforced chip basket and chip screen with magnet feature
- Stainless steel operator panel with permanent labeling
- 4 central lubrication points for leadscrew drive with manual grease gun
- New machine documentation
- CE marking by manufacturer (1995)
Remarks:
The machine is overhauled and the machine body has been fully refurbished. The following wear parts were replaced or renewed:
- New trapezoidal screws and nuts made of cast wear-resistant bronze
- All bearings and seals replaced
- The entire coolant system incl. coolant/lubricant swiveling system is new
- New two-speed SEW gear motor
- New electrical system (Siemens)
- New safety door replacing the old light barrier
- New clamping jaws
- All sheet metal parts such as covers, chip chute, basket, screen, and spindle guard are new
- Stainless steel operator panel with permanent labeling
Hjdpfxow Huh No Agmsnn
- Machine has been newly painted with 2-component structural lacquer
This machine carries the manufacturer’s CE marking.
General Information:
The twin-spindle drive ensures quiet, centrally aligned pull and constant broaching speed. The machine is primarily designed to cut keyways up to 18 mm wide (from 16 mm tool width only with stepped tool shanks).
The design allows for quick and easy setup for broaching with flat broaches for keyway slots.
Thanks to the universally designed pull bridge and machine table, broaching with both profile and flat broaches is possible without requiring additional pull heads.
Listing
Radom
17,719 km
Pile turner
Manfred Rachner R 1000 PAPile Turner
Call
Condition: good (used), Manfred Rachner R 1000 PA Pile Turner
The machine is in very good condition and ready for operation.
Technical specifications:
Format: 1030 x 740mm
Stack height: 1400mm
Load capacity: 1000kg
Device weight: 850kg
Power supply: 380V
Stack aeration + shaking
Frequency inverter control.
Control panel, fast operation, hydraulic drive.
Quiet operation.
Compact design, space-saving.
Hnsdpjzc Rwqjfx Agmjn
Listing
Malsch
18,657 km
Gear Deburring Machine
RAUSCHGratomat 300 H
Call
Condition: excellent (used), max. wheel diameter 600 mm
gear width 250 mm
max. module 10
Hodszcq Rkopfx Agmenn
min. module 1
weight of the machine ca. 0,9 t
dimensions of the machine ca. 1,8 x 1,4 x 1,4 m
Listing
Hergensweiler
18,638 km
Welding turntable, turntable, welding table
Protec L Manipulator 1000 KgHDL 1000
Call
Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, table load: 1,000 kg, 3-axis turning and tilting positioner with 1000 kg load capacity, clamping plate diameter 0.65 meters
Height adjustment 1000 - 1500 mm
Suitable for welding, assembly, processing, etc.
With its stable and robust construction, flexible positioning via three axes including overhead, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces.
Optimal positioning of the workpiece improves welding quality and allows higher specified loads in any position. Thanks to the endless rotation of the two rotary axes and additional height adjustment, all workpiece positions (including overhead) are possible.
Turntable speed infinitely adjustable from 0.1 to 1.0 rpm.
With wireless remote control
Rotation range 360° infinite
Hnedpfx Asxbh Dqogmon
Swivel range 360° infinite
Lift: 1000 - 1500 mm
Arm outreach radius: 1 meter
Listing
Ireland
18,646 km
Record Panda 1000 Flow Wrapper
Record Panda 1000€ 5,950
Call
Condition: good (used), Record Panda 1000 Flow Wrapper
All contact parts are stainless steel
250mm wide double Jaw feature
Adjustable infeed max width 210mm
Distance between flights 330mm
Adjustable temperature jaws and crimpers
Infeed length 1500mm
Overall length 3500mm
Variable speed
3 phase power
In excellent condition
Price € 5,950
Hedpfxjn R Suwe Agmenn
Listing
Hövelhof
18,428 km
Broaching machine
Rausch / WiemersSR 30
Call
Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine
Manufacturer: Rausch/Wiemers
Model: RS 3/1000 Machine No.: WAG 3102
Year of manufacture: 2024 Weight: 480 kg
Revision: 11/2024 by Wiemers AG
General / Technical Specifications:
Completely overhauled, mechanical vertical broaching machine
Rausch SR 30, unused with "CE" marking
Tensile force: 30 kN (3,000 kg)
Broaching speeds: 3 m/min & 6 m/min
Hjdev Rpnmspfx Agmsnn
Return speed: 6 m/min
Maximum stroke: 1,000 mm
Maximum tool length: 1,200 mm
Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm
Table opening: Ø 90mm for standard broaching mandrels "Rausch System"
Workpiece diameter: any (removable coolant swivel system)
Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank)
Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments)
Motor: 2.5kW/3.0kW 2-stage for 2 working speeds
Power supply: 400V / 50Hz
Equipment:
- Gear motor drive with 2 working speeds
- Modified Wiemers "SR" drive system
- Reinforced drawbridge made of tool steel for greater pulling forces
- Safety door with door lock, safety query, and safety monitoring
- Easily removable chip chute with tool storage option
- Externally adjustable tool length adjustment system (across all machines) reproducible)
- Protective cover for the stroke adjustment and electrical switching units
- Oil-tight storage on the control cabinet
- Electrical scanning of the clamping jaws
(Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool)
- Integrated coolant system with electrically switched solenoid valve and drain cock
- Coolant swivel system, with automatic coolant switching via the swivel system
- Extra-reinforced chip basket and chip sieve with magnetic insert
- Stainless steel control panel with durable markings
- 4 central lubrication points for the trapezoidal spindle drive with manual grease gun
- Electrical preparation for an external control element (16-pin connector)
- Preparation for automatic clamping jaw opening during profile broaching via roller lever
- Machine documentation with "CE" confirmation declaration
Optional additional options:
- Automatic clamping jaw opener for easier tool removal during profile broaching
- Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm
- External electrical control unit for broaching and return stroke, as well as emergency stop operation
Note:
The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024).
General
The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks).
Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.
Listing
Sierakowska Huta
17,772 km
Wood Chipper Shredder
ŻENO ZTLL 600×1000
Call
Condition: excellent (used), Catalogue number 7268
TECHNICAL DATA
- Loading hopper dimensions (top) L/W: 1000x600mm
- Loading hopper dimensions (bottom) L/W: 650x600mm
- Rotor width: 570mm
- Motor: 15kW
- Screen: 16x12mm
- Knife size: 40x70mm
- Number of knives: 18 pcs
- Autoreverse
- Pressure drawer
- Pump motor: 0.75kW
- Dimensions L/W/H: 1900x1450x1450mm
- Weight: 1040kg
ADVANTAGES
– German production
– Not repainted
Hodpoza Eabsfx Agmonn
– Very good condition
– Used shredder
Original photos
Video of machine start-up:
youtube.com/watch?v=fSKMkMPlp-8
Net price: 29,900 PLN
Net price: 7,120 EUR (based on rate 4.2 PLN/EUR)
(Prices may vary with currency fluctuations)
Listing
Neukamperfehn
18,359 km
Workbench
SSI Schäfer/ Abm.: 1600 x 1000 x 900 mm(BxTxH)
Call
Condition: good (used), We offer here a used
workbench frame for sale.
Dimension:
Width: approx. 1,600 mm
Height: approx. 900 mm
Depth: approx. 1.000 mm
Technical data of the workbench frame:
Manufacturer: SSI Schäfer
Type: PR 350/600
Included in delivery are:
02x workbench stand, used
material color: sendz. galvanized
stand height: 900 mm
stand depth: 1.000 mm
Incl. cross and diagonal braces, foot plates
The stands are pre-assembled
( screwed truss )
02x workbench crossbars, used
Material color: gray
box profile: 110/140 x 50 mm
Hnsdpjhvmmzsfx Agmon
clear width: 1.400 mm
04x safety pins, used
execution: completely galvanized
The pictures serve for the clarification of the material.
The material color can deviate if necessary.
- The workbenches are commissioned unassembled;
- The workbench stands are pre-assembled;
- The production time is usually approx. 3 - 5 working days.
Listing
Neukamperfehn
18,359 km
Working bench
Vogelsang // Abm. 2860 x 900 x 1000 mm( B x H x T )
Call
Condition: good (used), Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm
We offer you here a used workbench frame
of the manufacturer Vogelsang for sale.
Technical data of the workbench frame:
Manufacturer: Vogelsang
Type: NS
The scope of delivery includes:
02x workbench stand, new
Material color: sendz. galvanized
stand height: 900 mm
stand depth: 1.000 mm
Incl. cross and diagonal braces, foot plates
The stands are pre-assembled
( screwed truss )
04x workbench crossbars, used
Material color: orange
box profile: 110 x 50 mm
clear width: 2.700 mm
08x safety pins, used
execution: completely galvanized
The pictures serve for the clarification of the material.
The material color can deviate if necessary.
- The workbenches are commissioned unassembled;
Hnodpfx Aehm Sr Sogmjn
- The workbench stands are pre-assembled;
- The production time is usually approx. 3 - 5 working days.
Listing
Neukamperfehn
18,359 km
Workbench workbench table workbenches table
SSI Schäfer PR600 /2.580 x 1000 x 938mm/Traversen 2.400 mm / verzinkt/lichtgrau
Call
Condition: excellent (used), The scope of delivery includes:
02x workbench stand, used
Material color: sendzimir galvanized
frame profile: 90 x 75 x 2,00 mm
stand height: 900 mm
stand depth: 1.000 mm
Hjdpfx Aji Ewqyogmonn
incl. cross and diagonal braces, foot plates
The stands are pre-assembled
( screwed truss )
04x workbench crossbars, used
Material color: RAL 7035 light gray
box profile: 80 x 40 mm
Traversentyp: TRV1-240-084-30CE
clear width: 2.400 mm
08x safety pins, new
finish: completely galvanized
01x chipboard II. choice, used
thickness chipboard: 38 mm
width chipboard: 2.580 mm
depth chipboard: 1.000 mm
Surface: coated if necessary
(two-part if necessary)
01x Chipboard II. Choice, used
thickness chipboard: 38 mm
width chipboard: 2.380 mm
depth chipboard: 1.000 mm
Surface: coated if necessary
(if necessary in two parts)
16x drilling screws, new
finish: galvanized
dimensions: 6,3 x 70 mm
The pictures are for clarification of the material.
The material color may differ if necessary.
The chipboards can be coated or uncoated.
- The workbenches are picked unassembled;
- The workbench stands are pre-assembled;
- The production time is usually about 5 working days.
Listing
Neukamperfehn
18,359 km
Workbench
SSI Schäfer/ Abm.: 1600 x 1000 x 900 mm(BxTxH)
Call
Condition: good (used), We offer here a used
workbench frame for sale.
Dimension:
Width: approx. 1,600 mm
Height: approx. 900 mm
Depth: approx. 1.000 mm
Technical data of the workbench frame:
Manufacturer: SSI Schäfer
Type: PR 350/600
Included in delivery are:
02x workbench stand, used
material color: sendz. galvanized
stand height: 900 mm
stand depth: 1.000 mm
Incl. cross and diagonal braces, foot plates
The stands are pre-assembled
( screwed truss )
04x workbench crossbars, used
Material color: gray
box profile: 110/140 x 50 mm
clear width: 1.400 mm
08x safety pins, used
Hnjdpehvmmdsfx Agmen
execution: completely galvanized
The pictures serve for the clarification of the material.
The material color can deviate if necessary.
- The workbenches are commissioned unassembled;
- The workbench stands are pre-assembled;
- The production time is usually approx. 3 - 5 working days.
Listing
Tata
18,035 km
Hydraulic press
JAM HYP 100010ton
Call
Condition: good (used), Year of construction: 2003, functionality: fully functional, type of input current: three-phase, pressing force: 10 t, stroke length: 200 mm, operating speed: 260 mm/s, table width: 430 mm, table length: 440 mm, oil tank capacity: 46 l, overall weight: 800 kg, Equipment: documentation/manual, safety light barrier, J.A.M "Japan" made 10 ton hydraulic press for sale in excellent condition.
Manufacturer JAM
HYP-1000 model
Hedpfxsvbfkro Agmjnn
Model year 1995
Capacity 98KN (10t)
Stroke length 200 mm
Open height: 395 mm
Table size 440 × 430 mm
Punch hole φ32 × 60L mm
Plunger approach speed: 260 mm/s
Plunger pressing speed: 19 mm/s
Ram return speed: 219mm/s
With light safety device
Two-handed operation.
Voltage 3 phase 200v 1.5kw
Press body weight: 800kg
Operating oil: 43 liters
Height (mm) 1395
Width (mm) 700
Depth (mm) 1170
If you need more information. We are here to help! Please contact us using the contact form or give us a call
Your ad has been automatically translated. Translation errors are possible.
Trust Seal
Dealers certified through Machineseeker

Listing
Tata
18,035 km
Pneumatic press 1ton
FCC FCP-C 1000 10KN
Call
Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces
manufacturer: FCP-C
pressing force 1 ton
Stroke: 75-100 (mm)
Air pressure 0.2-0.5 MPa
Open height 320 (mm).
two-hand operation
table size: 200x230mm
Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm).
Speed controller
Low friction roller
Rotation stop lever
Hodpfjv E Sazjx Agmenn
height: 880mm
length: 360mm
width:400mm
weight: 105kg
Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.
Listing
Tata
18,035 km
Hydraulic press 10 ton
JAM HYP 1000 10 ton
Call
Condition: excellent (used), functionality: fully functional, overall weight: 800 kg, Year of construction: 1995, pressing force: 10 t, operating speed: 260 mm/s, stroke length: 200 mm, table length: 440 mm, table width: 430 mm, type of input current: AC, Equipment: safety light barrier, Manufacturer JAM
Model HYP-1000
Model year 1995
Capacity 98KN (10t)
Stroke 200mm
Nyitott magasság: 395mm
asztal méret 440 × 430mm
Shock hole φ32 × 60L mm
ram aproaching speed:260 mm/s
ram pressure speed:19 mm/s
ram return speed: 219mm/s
With light safety device
voltage 3-phase 200v 1,5kw
press body mass: 800kg
Hnjdpfx Aewcqc Uogmon
operation oil: 43liter
Height (mm) 1395
Width (mm) 700
Depth (mm) 1170
Listing
Tata
18,035 km
Vertical Bandsaw 1000mm
T-JAW 1000
Call
Condition: excellent (used), functionality: fully functional, power: 1.47 kW (2.00 HP), input voltage: 200 V, cutting height (max.): 1,000 mm, empty load weight: 740 kg, throat depth: 1,000 mm, Vertical Variable Speed Bandsaw with Stationary Table
manufacturer:T-JAW Taiwan
model:1000
Height Under Guide 325mm
throat, Band to Column 1000mm
Blade Speed: 20-394m/min
Blade Width 3-25mm
Blade Length 4670mm
Size of Main Table 740×680mm
Size of Auxiliary Table 679×477mm
Tilt, Main Table 15° R, 15° L
Motor 2HP
fűrészlapvezető
Infinitely variable speed.
The band tension is cushioned.
The upper wheel could be adjusted for band tensioning.
Hand wheel controlled speed.
Adjustable saw blade guides.
Machine light is fitted.
Change speeds while the machine is in operation, without stopping, without pulley changes.
Cast iron frame to minimize machine vibration.
Machine Size 1690×760×1890mm
Net Weight 780kgs
Hnsdpfswr Nlysx Agmjn
Listing
Rattelsdorf
18,433 km
Moulder
WEINIG UNIMAT 1000UNIMAT 1000
Call
Condition: excellent (used), working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, total width: 240 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, Weinig Unimat 1000 with grooved table
Working width: 240 mm, working height: 160 mm,
5 spindles
Spindle diameter: 50 mm
Spindle arrangement:
1-Bottom (7.5 kW) 7000 RPM
2-Right (7.5 kW) 7000 RPM
Hsdpfx Agezbz Uksmenn
3-Left (7.5 kW) 7000 RPM
4-Top (7.5 kW) 7000 RPM
5-Bottom (5.5 kW) 7000 RPM
Feed rate: 4 kW / 6-36 m/min, one driven roller in the table at the outlet.
We make it easier for you to find: "rausch rs6/1000"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month

























































































































































































































































































































