Used Radio-Energie Ac-14 for sale (28,639)

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 7500 rpm -Shaft: Ø 35 mm Ibodpfsdwkyxex Ahyec -Dimensions: 370/192/H295 mm -Weight: 24 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 5,121 h, load capacity: 1,400 kg, lifting height: 8,180 mm, free lift: 2,700 mm, fuel type: electric, mast type: triplex, construction height: 3,360 mm, battery capacity: 560 Ah, battery voltage: 48 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 3,674 kg, total height: 3,360 mm, total length: 1,800 mm, total width: 1,250 mm, fuel: electricity, Equipment: sideshift, OM XR 14 ac – Reach trucks TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 8.180 mm Closed height: 3.360 mm Free lift: 2.700 mm Mast: Triplex (3F818) Fork length: 1.150 mm Fork carriage: 2 B Drive: Elektro 48V Battery: 48 v 560 Ah v. 2017 Charger: Dreiphasig 48 V not testet Tyres: Polyurethan V Service weight: 3.674 kg Length: 1.800 mm Width: 1.250 mm Year of manufacture: 2008 Operating hours: 5.121 h Condition: working condition EQUIPMENT 4th valve, Pulse control ATTACHMENTS Sideshift Internal no.: 1309210 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin. Ibodoz Aqf Hjpfx Ahyoc

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. Isdpfxjy Efmgo Ahyjbc I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Year of construction: 1998, condition: ready for operation (used), A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible. Ibjdpfx Aoyhgniohyec

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: D714 HDB, Tetra Pak Tetra Centri D 714HGV Separator Manufacturer: Tetra Pak Model: Tetra Centri D 714HGV Machine Type: High-Capacity Centrifugal Separator Year of Manufacture: 2017 Capacity: Approx. 22,000 L/hr Condition: Used – Fully Functional Application: Dairy / Milk / Cheese Processing Location: Ireland Description Tetra Pak Tetra Centri D 714HGV high-capacity centrifugal separator, manufactured in 2017 and previously installed in a large-scale dairy and cheese production facility. The D 714HGV is an industrial centrifugal separator designed for continuous processing in demanding dairy applications. The machine is suitable for high-throughput separation duties and can be used in milk, cream and other dairy-processing applications depending on its configuration. The unit is offered for sale following the decommissioning of the production facility and represents an opportunity to acquire a modern Tetra Pak separation system from an operational industrial plant. Key Specifications Manufacturer: Tetra Pak Model: Tetra Centri D 714HGV Year: 2017 Capacity: Approx. 22,000 L/hr Type: Industrial centrifugal separator Condition: Used Status: Fully functional prior to removal Industry: Dairy / Food Processing Previous Application: Cheese / Dairy Production Location: Ireland Suitable for a range of industrial dairy-processing applications, including: Ibodpezy Riyofx Ahyec - Milk separation - Cream separation - Dairy processing - Cheese production - Whey processing - Food and beverage processing - High-throughput centrifugal separation Inspection: Available by appointment.

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Ibedpfxjzu T Smj Ahyec Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: ready for operation (used), Key Specifications – MBP 14‑Head C2T Series: MBP C2 (stainless steel, central-feed, food-grade) Number of Weigh Heads: 14 Weigh Height/Capacity: Up to 5,000 g per weighment Operating Speed: Up to ~180 weighments per minute Bucket Type: Smooth stainless-steel buckets – ideal for reducing product stickiness Drive & Controls: Stainless-steel construction for all product contact parts Iedpfx Aswqq Nkjhyobc Step-motor‑controlled bucket gates ensure precise portion release Windows‑based multimedia control system with remote access/diagnostics Electrical Requirements: 230 V, 1‑phase, 60 Hz, 10 A Multivac R530 🔧 Key Specifications • Machine Dimensions: o Length: Approximately 6,600 mm to 8,500 mm, depending on configuration o Width: Approximately 1,050 mm to 1,200 mm o Height: Approximately 1,900 mm to 2,000 mm o Weight: Approximately 2,500 kg to 3,175 kg • Film Specifications: o Lower Film Width: Typically ranges from 420 mm to 528 mm o Upper Film Width: Typically ranges from 415 mm to 510 mm o Film Thickness: 50 to 500 microns, depending on material o Advance (Pitch): Commonly between 228 mm to 320 mm • Forming Area: o Length: Up to 521 mm o Width: Up to 400 mm o Depth: Up to 145 mm • Performance: o Cycles per Minute: Typically between 7 to 20, depending on application and configuration • Utilities: o Voltage: 400V, 3-phase, 50 Hz o Power Consumption: Approximately 19 kW o Compressed Air Requirement: 7 to 10 bar o Water Connection: 1.5 to 4.5 bar

Year of construction: 2024, condition: used, Manufacturer: Ziemex Processing Equipment Year: 2024 Model: Z-compact Serial number: 1403204 Type: Welded plate heat exchanger Iodpsz Iubmofx Ahyebc Material: 1.4404 stainless steel (316L) Fluid: Oil (circuit B) / Water (circuit A) Circuit B volume: 59 L Circuit A volume: 6 L Permissible pressure: 0 to 6 bar Permissible temperature: 0 to +200 °C (circuit B) / 0 to +110 °C (circuit A) Test pressure: 9.5 bar (circuit B) / 8.7 bar (circuit A) Fluid group L1G GR2 Heat exchange surface area: 4.2 m² Unladen weight: 142 kg The Z-compact® welded plate heat exchanger combines the thermal efficiency of a plate heat exchanger with the mechanical robustness of a shell-and-tube heat exchanger. L'échangeur de chaleur à plaques soudées Z-compact® allie le rendement thermique d'un échangeur de chaleur à plaques à la robustesse mécanique d'un échangeur de chaleur à calandre et tubes. Under equivalent operating conditions, the Z-compact® offers better heat transfer than a conventional tube-and-shell heat exchanger. Its heat transfer surface is more efficient and its pressure drops are lower.

Condition: used, mileage: 697,000 km, first registration: 08/2000, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: red, gearing type: semi-automatic, emission class: euro2, Year of construction: 2000, Equipment: ABS, Manufacturer Scania Model 114G 380 8x2?6 Assmann 14 m3 Vacuumtruck Year 2000 Condition Good Serial Number YS2P8X20001256094 Ref. nr. 908014 Reg. date: 14-08-2000 Engine: DC11 380 Hk: 380 Km: 697000 Gearbox: Opticruise (GRS900) Eurotype: 2 Diesel tank: 1 Tank liter: 300 L Rear view camera: ? Air conditioning: ? Cabin type: CP14 Radio: ? Drum brake: ? ABS: ? Engine brake: ? Tire Size: 385/65R22,5 -385/65R22,5 - 315/80R22,5 - 315/80R22,5 Ibjdsxynnyspfx Ahyoc Cover% left 40% 30% 40% 60% Front suspension: Springs Suspension rear: Air Wheelbase: 4700 mm Toolbox: ? Hydraulic system: ? Total weight: 32000 Kg Net weight: 19000 Kg Load capacity 13000 Kg Manufacturer: Assmann Tank capacity:13400 L (11600 + 1700) High pressure pump:Uraca KD 716 G High pressure capacity:333 l/min 170 bar. Vacuum pump:Wittig RFW 200 Vacuum capacity:20,000 l/min. Remote control: ?

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 818745 / (PPS 2013- 001), This machine was updated in 2013 with a two-hand safety system. It is a semi-automatic machine that prints labels and presents them in a fixed position. The operator places the box in the fixture and presses the OK button with both hands for safety. Afterward, the label will be applied. The unit consists of an Allen printer 53XL80 and a table-top version – Herma 414 from 2011. The table height can be adjusted by pressing a button. The control system is integrated into the HERMA 400 labeler. Machine capabilities: Labeling of cartons. Output: max. 30 pcs./min. Size – Cartons (55 x 30 mm and 95 x 120 mm). Isdpfx Ajzx D I Tshyjbc Label specifications: Label size: 70 x 20 mm, 100 x 70 mm, 100 x 45 mm, 140 x 25 mm. Label specifications: K: Core diameter 76 mm R: Reel diameter max. 300 mm B: Label width max. 160 mm L: Label length max. 800 mm Label winding outside.

Condition: used, Year of construction: 2001, - Producer Bürkle Ijdpfxozf N Ews Ahysbc - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Isdszzp N Iepfx Ahyjbc Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: good (used), mileage: 617,982 km, power: 290 kW (394.29 HP), first registration: 04/2014, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: airbag, crane, cruise control, trailer coupling, = Additional options and accessories = Ibedpfxozucn Dj Ahyjc - Additional steering axle - High Beams - Power take-off (PTO) - PTO - Sleeping cabin - Speed limiter = More information = Axle configuration Front axle: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Lift axle; Steering; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 16.700 kg Carrying capacity: 9.300 kg GVW: 26.000 kg Functional Make of bodywork: Palfinger PK 34002-SH-C Condition Technical condition: good Visual appearance: good Financial information Price: On request Identification Registration number: 83-BDT-9 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Year of construction: 2025, condition: new, Selling 2 units of storage batteries with 14.33 kWh capacity each. Ibodpfozlhxvex Ahyjc Lithium iron phosphate batteries, priced at €1900 per unit = €3800 total.

Condition: excellent (used), functionality: fully functional, mileage: 750,000 km, first registration: 11/2007, fuel type: diesel, brakes: engine braking, emission class: euro3, Year of construction: 2007, Equipment: ABS, airbag, Mercedes-Benz Actros 4144 K truck Three-way tipper body Manual cover/tarp system Year: 10/2007 Four-axle (8x4) construction vehicle ZF 16-speed manual transmission Euro 3 emission standard Engine displacement: 11,946 cc (6 cylinders) Isdpoz Suddefx Ahysbc Power output: 320 kW (435 hp) Mechanical leaf spring suspension Air conditioning ABS Engine brake Radio Electric mirrors and windows Mileage: 750,000 km

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 24406, functionality: fully functional, operating hours: 900 h, input voltage: 400 V, input frequency: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – Technical Specifications (Main) 🔹 Working range (axis travel) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, and board nesting 🔹 Tool changer • Automatic tool changer (ATC): up to 18 positions 🔹 Material clamping system • Vacuum table with beams and suction cups 🔹 Saw unit • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm ⸻ Ibodsykn Dwjpfx Ahyec 🛠️ Typical features and equipment • 5-sided drilling (top + X+/X−/Y+/Y− sides) • Saw unit for cutting and grooving • Optional horizontal milling aggregate (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication • Waste and chips conveyor (belt) ⸻ 📌 General information • Manufacturer: IMA Schelling (Germany) • Year of manufacture commonly found in offers: approx. 2010–2016 (often 2014) • Applications: furniture production, MDF panels, HPL, solid wood, nesting

Condition: like new (used), Year of construction: 2017, operating hours: 633 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, Manufacturer + model: STILL EXV 14 C * EX * Miretti 2G / Zone 1 - 3D / Zone 22 * Mast: 2F2350 ID: 26082.2204 Cat.: Demo Mast: 2F2350 Forks: 1250 mm Lowered height: 1680 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2017 Hours: 633 hours Capacity: Complete NEW * 24v / 240ah * Manufactured 04/2026 Ibjdpfx Ahozv R I Ijyjc Options: * EX * MIRETTI - E7936 System / Certificate = TUV - CY 16 ATEX 0205756 Gas group = IIB Type = Cat 2G (permitted in ZONE 1 and 2) Temperature class = T3 Gb Dust group = IIIB Type = Cat 3D (permitted in ZONE 22) Temperature class = 200*C ( = T3) C - Db

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5000 mm, width 1400 mm - 2 decks * Driving: 15 kW E-motor Iedpezqdczofx Ahyjbc

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Iodpfx Aoz Suarjhysbc Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement Iedpfxewv Nq Rs Ahyebc +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Contact us for more details.

Condition: used, empty load weight: 6,200 kg, maximum load weight: 35,800 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, first registration: 02/2021, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: brown, Year of construction: 2021, operating hours: 280,039 h, mileage: 280,039 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 69702 Doll, H3L-14 * Year of manufacture: 2021 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Follower-steered axle (trailing steering axle) * Duomatic air connection * 15-pin connection plug * Storage box/toolbox * Telescopic – telescopic semi-trailer * Suspension: Air * Gross vehicle weight: 42,000 kg * Unladen weight: 6,200 kg * Payload: 35,800 kg * Perm. gross weight: 42,000 kg * Axle manufacturer: SAF * Tyre condition 1st axle: 70% -- 60% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 60% -- 60% - Tyre size: 385/65 R22.5 * Tyre condition 3rd axle: 60% -- 50% - Tyre size: 385/65 R22.5 * Tyre sizes: 385/65 R22.5 * Mileage: 280,039 km * Telescoping length: 3,500 mm * Extension range: 9,450 mm – 12,950 mm * 6x steel bolster frames with Ecco-Steel squared stanchions Ibedpfx Ahoyib D Eoyjc * Timber transport: 2x 6 m, 2x 5 m, 3x 4 m, 3x 3.7 m, 3x 3 m; long timber up to 14 m * 3rd axle is trailing-steered with reverse lock Liability disclaimer: Subject to change, prior sale, and errors excepted. Further photos and videos available on our website. Our comprehensive service offer includes, for example: * Purchase/Sale/Rental of commercial vehicles * Fast, hassle-free financing * Application for all (export) documents * Procurement of export/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer of commercial vehicles For further information, our trained specialists are at your disposal and will be happy to advise you.

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * On Stock: 2 pieces * 1x Surface: 5000 x 1400 mm - 2 decks * 1x Surface: 5000 x 1600 mm - 2 decks * Incl.: E-motor and springs. Ibsdpoywngyefx Ahyec

Condition: ready for operation (used), Fanuc A06B-6055-H222 spindle control / AC Spindle Servo Unit SN: K72-00144A, used, in good condition, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Iedpfxjx Dwm He Ahysbc

Condition: used, empty load weight: 6,200 kg, maximum load weight: 35,800 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, first registration: 02/2021, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: brown, Year of construction: 2021, operating hours: 275,194 h, mileage: 275,194 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69699 Doll, H3L-14 * Year of manufacture: 2021 * ABS, Anti-lock Braking System * Air suspension * Lift axle * Trailing steering axle * Air connection Duomatic * 15-pin connector plug * Storage/toolbox * Suspension: Air * Gross weight: 42,000 kg * Unladen weight: 6,200 kg * Payload: 35,800 kg * Permissible gross weight: 42,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Mileage: 304,338 km * Telescopic extension: 3,500 mm * Extension: from 9,450 mm to 12,950 mm * 6x steel bolster bodies with Ecco-Steel square stakes * Timber transport: 2x6m, 2x5m, 3x4m, 3x3m, 7m, 3x3m; long timber up to 14m * 3rd axle with trailing steering and reverse lock Liability disclaimer: Subject to changes, prior sale, and errors excepted. More images and videos available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing options * Handling of all (export) documentation * Ordering of export/license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading and load securing Ibjdpoyib Ikofx Ahyec * TÜV inspections, registration service * Delivery/transport of commercial vehicles Contact our trained professional staff – we will be happy to advise you.

Condition: like new (used), Year of construction: 2017, operating hours: 485 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, Manufacturer + model: STILL EXV 14 C * EX * Miretti 2G / Zone 1 - 3D / Zone 22 * Mast: 2F2350 ID: 26080.9198 Category: Demo Mast: 2F2350 Lowered height: 1680 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2017 Hours: 485 hours Capacity: Complete NEW * 24v / 240ah * Manufactured 04/2026 Options: * EX * MIRETTI - E7935 System / Certificate = TUV - CY 16 ATEX 0205756 Gas group = IIB Type = Cat 2G (allowed in ZONE 1 and 2) Temperature class = T3 Gb Dust group = IIIB Ibsdpfx Aszv R I Ushyec Type = Cat 3D (allowed in ZONE 22) Temperature class = 200*C (= T3) C - Db