Used Röderstec Rxp500Dsc for sale (14)

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, 5-axis HSC milling machine Röders RXP500DSC with linear direct drives in all axes and torque drives in the rotary axes. Travels: X450mm, Y400mm, Z240mm Spindle / table distance: approx. 315mm - Linear direct drives in all axes - wear-free Specification: - Tool changer places: 19 - Cooling unit for drives, motors, spindle and cable cabinet - Measuring laser for the fully automatic measuring of milling tools (length / diameter / contour / cone angle) as well as wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance Klsdpfx Apott Arge Ajw - Automatic 3D probe including calibration ball in the tool changer - Minimal quantity lubrication - emulsion cooling - Spindle HSK40E with max. 42.000 rpm - Spindle compensation - Zero point clamping system Erowa integrated in the machine table - manual operating of chuck clamping - Automation package for retrofitting the machine with a pallet changer - Handbox The machine is overhauled in our house and is now in almost new condition. The machine can be inspected and tested under power after completion at our site. Please make an appointment with us!

Condition: refurbished (used), functionality: fully functional, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine will be completely overhauled, inspected, and measured in our workshop. The machine will once again meet new machine tolerances! Travel ranges: X450mm, Y400mm, Z240mm Kledpszmgt Isfx Ap Asw Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - Tool changer, 42-position - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/taper angle) as well as wear monitoring including tool cleaning before measurement - Handbox - Remote maintenance - Automatic 3D probe including calibration sphere in the tool changer - Minimum quantity lubrication - Emulsion cooling - Spindle HSK40E with max. 42,000 rpm - Spindle length compensation - Zero-point clamping system EROWA integrated into the machine table - Manual chuck control - Automation RC2 pallet changer for 45 Erowa ITS50 pallets - ideal for the production of electrodes An inspection of the machine in operational condition is possible at any time. You can also find information about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 300 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of spindles: 1 Table width: 405 mm Table length: 405 mm Max. table load: 800 kg Number of tool magazine slots: 26 MACHINE DETAILS Control system model: RMS6, version 3.18 Input voltage: 400 V Kodpfx Apoy Nzuho Ajlw Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg EQUIPMENT Documentation/manual Infinitely variable spindle speed control Chip conveyor Blum laser 3D tool setter Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction system

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: RMS6, Versie 3.18, total height: 2,600 mm, total length: 4,210 mm, total width: 2,350 mm, table width: 405 mm, table height: 405 mm, table load: 800 kg, rotary table diameter: 405 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSKE40, number of spindles: 1, number of slots in tool magazine: 26, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Röders RFM 600-DS is a high-speed (HSC) milling/machining centre. This machine is designed for applications such as high-precision engineering, high speed cutting (HSC), and for small to medium-sized workpieces like mould parts, tools, injection moulding frames, precision components, housings, and complex geometries. The machine is equipped with a chip conveyor, Blum laser, 3D tool probe, Hirschmann 9000 zero-point clamping system, electronic handwheel, Extor extraction unit, and all original documentation. Weight: approx. 7000kg Dimensions: 4210x2350x2600 (LxWxH) Kedpfx Apoxcvgie Aelw For further information such as positioning accuracies, see last image!

Condition: used, Year of construction: 2000, functionality: fully functional, Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of manufacture: 2000 Kedpoy Efp Usfx Ap Aelw Condition: used, under power, control on Windows 7 NEW x-path 600 mm y-path 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm 18-position tool changer Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röders Jobmanager (for processing several workpieces in succession) Probing programs for almost all common geometries Extor extraction system for dusty machining Minimum lubrication Bed path blower Blum measuring laser (for tool measurement length + diameter + contour and breakage control) Tool cleaning (air) Cooling unit for spindle and switch cabinets documentation

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, feed length X-axis: 540 mm, feed length Y-axis: 635 mm, feed length Z-axis: 400 mm, coolant supply: 10 bar, number of spindles: 1, Röders TEC RXP 601 DSH – 5-Axis High-Precision Milling and Grinding Center (2018) We are offering a Röders RXP 601 DSH machining center from 2018 in excellent condition. This machine guarantees top precision in high-speed milling and precision grinding and is ideally suited for demanding mold making, tool manufacturing, and the production of precision components. Technical Highlights: Kodpsydu Upjfx Ap Aelw - 5-axis CNC milling and grinding center (X/Y/Z + A/C) - Travel paths: 540 × 635 × 400 mm - Levicron high-precision air bearing spindle - Air bearing technology, virtually frictionless - Operating pressure up to 10 bar - Ideal for HSC milling and fine grinding - Integrated grinding unit with oil - Oil-based coolant lubricant - Grinding oil filtration and treatment system - Designed for ultra-precise grinding processes - Direct drives and optical direct measuring systems on all axes - Thermally stabilized design for maximum dimensional stability Condition: very good

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Ksdpevt Dwbofx Ap Aelw Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: good (used), travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, controller manufacturer: Röders, table width: 700 mm, table length: 900 mm, spindle speed (max.): 36,000 rpm, operating hours of spindle: 100 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Precision machining center Röders Tec RP 800 Year of manufacture: 2005 Control: Röders Tec Spindle speed: 35,000 rpm Spindle has been overhauled – approx. 100 hours run time Drive power: 17 kW Kljdpfx Apoy Rgalj Asw Tool holder: HSK 50 Number of magazine slots: 30 Internal coolant supply: 20 bar X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Equipment: Chip conveyor Coolant system 3D probe Electronic handwheel

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 50,000 rpm, overall weight: 3,800 kg, workpiece weight (max.): 200 kg, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 2,000 mm, Equipment: documentation/manual, Röders RXP300 -overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: X-axis: 320 mm Y-axis: 300 mm Z-axis: 200 mm (height) The clearance height is 390 mm above the machine table without chuck. Machine table: Size: 370 mm x 350 mm Workpiece mass: Maximum 200 kg Axis drives: Highly dynamic linear motors in all axes with integrated cooling. Kledpfsvvigmjx Ap Ajw Feed rates: 0 - 40,000 mm/min in all axes. Spindle: HSK25E 50,000 rpm Tool changer: 42-way Automatic 3D probe Control: Röders RMS6 in current version (2024) A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS Kjdjvvlmcopfx Ap Aslw -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, Used HSC machine RXP400DS/ RXD5 -overhauled- The machine is completely overhauled, tested and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Drives of the linear axes: Kledolzhhcepfx Ap Asw Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min in all linear axes. - Network connection: - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction -RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - Tool changer 12-way row, optional tool changer conversion to chain - High-precision option - Remote maintenance via Teamviewer - Transport dimensions of machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: Approx. 3,000 kg A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Portal machining center for HSC milling The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Speed: 36,000 rpm - Fischer motor spindle - Spindle mount: HSK E50 - Feed rate: up to 60 m/min. Work table - Dimensions 900 mm x 700 mm - Max. workpiece weight 800 kg Control - Röders HSC RMS6, including software for: milling simulation and for cutting out machining - Electronic hand control panel and mouse - Ethernet interface integrated in Windows NT - Remote maintenance of the RSM 6 machine control Machine structure - Portal version with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: tool length correction, diameter measurement and tool breakage monitoring Kjdpfevri Nmsx Ap Aolw - Microjet spray cooling and lubricator - Fixed bearings and spindle nuts water-cooled - Fully protected cabin (crane loading possible) - Connection for the work area extraction - 2 pcs. Screw chip conveyor - Workpiece cleaning via separate air nozzles Machine data - Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work was carried out regularly. A viewing with power and chips is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm Rapid traverse X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min Work Table Table width: 405 mm Table height: 405 mm Kodpfxexvybds Ap Ajlw Table load capacity: 800 kg Rotary table diameter: 405 mm Spindle Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of tool magazine pockets: 26 MACHINE DETAILS Control model: RMS6, Version 3.18 Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg Input voltage: 400 V EQUIPMENT Documentation/manual Continuously variable spindle speed Chip conveyor Blum laser 3D tool probe Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction unit

Condition: good (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 11353-24, travel distance X-axis: 500 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 240 mm, table width: 550 mm, table length: 450 mm, overall weight: 5,500 kg, spindle speed (max.): 42,000 rpm, Roders TEC RXP 500 – Precision 3-Axis CNC Milling Center Kedpfx Apowww S Ss Aolw Year of manufacture: 2005 We offer a used 3-axis CNC machining center Roders TEC RXP 500, renowned for its exceptional precision, high dynamics, and surface quality. Ideal for tool and mold making, micromachining, aluminum, and plastics processing applications.