Used Pressor P18 for sale (1,436)

Year of construction: 1984, condition: used, Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm Lhsdpfxsd Hp Tzo Aftoi -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Lhodpfx Afjx I Nfretei Max. output, hourly cycles: ca 4000

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. Lodpfx Aoib Dadsftehi The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: excellent (used), 2.4 kW motor Stepless speed adjustment Electronic displays for height and speed Lhodpfoxq Ri Usx Aftji

Condition: used, operating hours: 48,000 h, Manufacturer: Alup Ledpfour N Tbex Aftehi Motor: 22 kW Output: 3.9 m3/min Loaded operating hours: 48,000 h

Year of construction: 1994, condition: good (used), Manufacturer: Boge Lhsdshtq Dvjpfx Aftei Type: V LEX 45 Engine: 45 kW Capacity: 6.5 m³/min

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Ledpfxozmub To Aftshi

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. Lhjdpfszlaa Eex Aftei The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 1,180 mm, total length: 1,950 mm, total width: 600 mm, Can an invoice including VAT be issued, but since I am VAT-exempt, it doesn't really make sense. Especially for such a bargain – less than 3,000 euros for a machine that cost almost 9,000 euros when new. Never used, so it's brand new. All information about the machine can be found in the photos. Lhjdpfx Afozlvahjtei

Condition: excellent (used), Year of construction: 2014, operating hours: 52 h, functionality: fully functional, power: 85 kW (115.57 HP), fuel type: electric, operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, 5 × RENNER screw compressors – 2 × RSF 85 + 3 × RSF 45 – Frequency-controlled – Water cooling – Heat recovery – Modbus A total of 5 compressors: - RENNER RSF 85 (85 kW) – 52 operating hours - RENNER RSF 85 (85 kW) – 123 operating hours - RENNER RSF 45 (45 kW) – 22 operating hours Lsdozi Ukmopfx Aftohi - RENNER RSF 45 (45 kW) – 138 operating hours - RENNER RSF 45 (45 kW) – 53 operating hours For sale is a package of RENNER RSF screw compressors in an industrial design. All machines come from an industrial test bench system in our own facility and were procured for a development project. Due to a project change, the test benches never went into productive operation. The compressors were then dismantled and stored. This is a specially configured industrial design with special features and practically no productive runtime: - Frequency control - RENNERtronic Plus control system - Modbus interface – integration into building automation systems possible - allowing external setpoint input (pressure/speed) - Water cooling - Design for high cooling water temperatures (60/80 °C) – but does not necessarily have to be used - High outlet temperature for efficient heat recovery (ideal for heating support) Technical data RSF 85 85 kW Frequency-controlled Operating pressure 5–10 bar Flow rate up to approx. 14.5 m³/min Water cooling RENNERtronic Plus Modbus RSF 45 45 kW Frequency-controlled Operating pressure 5–10 bar Flow rate up to approx. 7.25 m³/min Water cooling RENNERtronic Plus Modbus The compressors were specifically designed for the utilization of waste heat. The water cooling allows high cooling water temperatures to be achieved, making the systems ideally suited for heat recovery and feeding into heating systems. The operating pressure can be increased to up to 15 bar by a modification of the pulleys and V-belts as provided by RENNER. A corresponding offer from RENNER is available, but the modification was never needed. Inspection: The machines are dismantled and stored. An inspection is possible at any time by appointment. We will gladly send further photos, nameplates and technical documents upon request. Price: Negotiable / Offers welcome.

Condition: excellent (used), CompAir L 75 compressor Operating hours approx. 3100 h (hours under load) Used as a backup compressor Ljdpfjh U R Rwox Aftehi Volume flow rate 10.25 m³/min Motor power 75 kW In very good, ready-to-use condition, directly from production!!!

Condition: excellent (used), Year of construction: 2000, HAUG Sauer Compressors AG High-pressure reciprocating compressor with associated pressure vessel and control cabinet Type: QTOX 120/65/35 WM-W Maximum final pressure: 66 bar Volumetric flow rate: 50 m³/h Rated power: 18.5 kW Lhsdeki Tzuspfx Aftei Rated speed: 1450 rpm Voltage/frequency: 400/50 V/Hz Year of manufacture: 2000 Maschinen- und Behälterbau GmbH High-pressure vessel up to 65 bar Type MB 00320-2.10 1000 liters Year of manufacture: 2017

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston Ljdozf Ivuopfx Aftehi

Year of construction: 2001, condition: good (used), Kaeser BSD 72 compressor Lhedpfemnqkisx Aftei

Condition: used, Year of construction: 2004, Technical details: length: 6006 mm width: 2440 mm height: 2590 mm motor power: 22 kw sound level: 66 dB(A) rated capacity: 22 KW operating pressure: 8.0 bar revolutions per minute of the motor:: 2.945 U/min temperature range: 3 - 45 °C weight of the machine ca.: Auf Anfrage t 20-foot container Compressor station, soundproof container with 2 compressor units 2 pieces SPX Hankison GmbH, type HHL 450 – a desiccant air dryer for industrial compressed air systems. It is used to remove moisture from compressed air so that machines, valves, or pneumatic systems do not corrode or freeze. SPX Hankison HHL 450 Manufacturer: SPX Hankison Type: HHL 450 Design: Heatless desiccant dryer Ljdpfjyx Tnrex Aftjhi Max. operating pressure: 16 bar Connection: 2" NPT Series: HHL / HHS / HHE compressed air dryers *

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations Lhedpfszav Ddox Aftei PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gross volume compressed air tank: 750 l Max. working overpressure compressed air tank: 11 bar Power: 15 kW Current: 400 V Voltage: 35 A Frequency: 50 Hz Length: 0,8 m Width: 0,8 m Height: 1,03 m Weight: 290 kg Ljdpfxjw Tbtkj Aftjhi Operation / Control: control panel on compressor Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Lhodpsyb Sdiefx Aftsi Made in Germany Good working condition

Condition: good (used), Cooling compressor Stal KTK 207 25-33 Bar YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm Lhsdpfx Afjyb Rqustei

Condition: used, Bitzer compressor rack chiller Lhsdpfx Afjy Sk Ntjtji -Type: 2 x HSK 6461-60, 2 x HSK 7451-70 -Volume: 2 x 165 m³/h, 2 x 192 m³/h -Cooling capacity: 620 kW at 0°C/40°C, 520 kW at -5°C/40°C, 420 kW at -10°C/40°C -Dimensions: 4300 x 1200 x 1500 mm -Stock quantity: 1

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Lhsdoy Iplfepfx Aftoi Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Year of construction: 2015, operating hours: 780 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: sn:CAI858663, ALUP Sonetto 15 500 Screw Compressor for Sale – Reliable Industrial Unit – TOTAL OPERATING HOURS: 780!!! Lodpfxeyzhmbo Aftshi For sale: ALUP Sonetto 15 500 screw compressor in good working condition, suitable for continuous industrial use. Key technical specifications: Power: 15 kW Air receiver: 500 liters Working pressure: 8–10 bar Air delivery: approx. 1.8–2.4 m³/min Type: tank-mounted screw compressor Cooling: air-cooled Control: integrated electronic controller Condition: Operating hours: 780 Regularly maintained / serviced Oil and filters: replaced at last service Currently operational / available for testing This compressor delivers reliable and stable performance, ideal for workshops, industrial applications, and automotive service environments. Additional information: Location: Gyor / Hungary Transport/shipping can be arranged if needed Price: 7,700 EUR (negotiable) For further information, feel free to contact by phone or message.

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Lsdpfx Afsyl S Ebotjhi

Condition: used, We offer pallets of approximately 5,000 kg open-type compressors, featuring a mix of Bitzer, DWM, and Bock units. This lot has been assembled for trade, export, and stock building purposes and is sold as a single complete batch. The entire package is available for one fixed package price. No individual sales are offered. If you have any questions or require additional availability, please contact us. Lodpfjycvkvsx Aftohi

Year of construction: 2021, condition: used, Refrigeration Dryer – ALUP ADD 36 Manufacturer: ALUP Kompressoren GmbH Model: ADD 36 (1) Year of manufacture: 2021 Machine type: Refrigerated compressed air dryer Description The ALUP ADD 36 is a refrigerated compressed air dryer designed to remove moisture from compressed air systems. The unit ensures dry and clean compressed air, protecting pneumatic equipment and improving the reliability of production systems. This dryer is suitable for industrial applications where consistent air quality is required, including manufacturing, packaging, and processing lines. Technical Specifications - Manufacturer: ALUP Kompressoren GmbH - Model: ADD 36 (1) Lodpfx Aeyt H Duoftshi - Year: 2021 - Product number: 4102005889 - Serial number: ITJ560627 - Power supply: 230 V - Frequency: 50 Hz - Power consumption: 0.236 kW - Phase: 1 Ph Operating Specifications - Working pressure: 15 bar - Maximum pressure: 15 bar - Maximum inlet temperature: 55 °C - Maximum ambient temperature: 43 °C - Refrigerant type: R513A Key Features - Reliable moisture removal from compressed air systems - Compact and energy-efficient design - Protects pneumatic tools and machinery - Suitable for continuous industrial operation - Easy integration into existing compressor installations Applications - Industrial compressed air systems - Food and packaging production lines - Manufacturing facilities - Pneumatic equipment protection Condition Used.