Compressors

BOGE C 7 LDR - 500

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Godpow Nih Ijfx Ah Ejbw Year of manufacture: 2007 Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating pressure: 10 bar, Compressor system consisting of: Screw compressor: Atlas Copco GA11VSD+ Refrigeration dryer: Atlas Copco FD70 Pressure accumulator Gbedpfx Ahsvu A Hde Eow Öwamat 4 Oil-injected screw compressor with variable speed control Max. operating pressure: 10.0 bar Engine power: 11 kW Volume flow: 25.5-115.2 m³/h Control hours: 61,837 h Operating hours: 21,094 h Engine starts: 267,928 Load cycles: 315,576

Year of construction: 2017, condition: excellent (used), Stationary piston compressor with a 500 L tank Gsdpfx Aolczl Ujh Eebw Air outlet: ¾" Dimensions and weights Length (product) approx.: 2020 mm Width/Depth (product) approx.: 570 mm Height (product) approx.: 1340 mm Weight (net) approx.: 245 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Input power: 6.52 kW Noise emission Sound pressure level Lp: 83 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor Compression system: HOS Intake capacity approx.: 950 l/min Delivery capacity approx.: 750 l/min Explanation of delivery capacity: at 6 bar working pressure Number of cylinders: 2 Number of compression stages: 2 Compressor speed: 960 min⁻¹ Compressed air tank Maximum pressure: 10 bar Tank capacity: 500 l Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, operating hours: 1,165 h, power: 59 kW (80.22 HP), fuel type: diesel, overall weight: 4,100 kg, number of cylinders: 4, motor manufacturer: Iveco, gearing type: hydrostat, Equipment: hydraulics, lighting, rear power take-off, trailer coupling, Track-type tractor Godpfx Ahe Ad Rvro Eobw Original, certified operating hours Rear-mounted hydraulics Power take-off (PTO) Three-point linkage

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, operating hours: 5 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, total height: 1,600 mm, total length: 5,700 mm, total width: 1,200 mm, overall weight: 3,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used OTT Tornado Plus, professionally refurbished and inspected. Very good condition with a traceable history. The machine is fully functional and connected. A test run can be arranged at any time by appointment. Equipment: Fine milling cutter, radius, cleaning set (4-way spray system incl. scrubbing brushes), angle insertion aid, Zk.c – profile drawing blade R1 (incl. pneumatic adjustment for workpiece feeler rollers for workpieces with and without protective film), Zk.c – profile drawing blade R2, Zk.f – surface drawing blade, flush cutter, corner rounding AKF, surface drawing blade, forming pressure zone, edge processing unit, edge magazine, radius drawing blade Touch screen: 18.5", clear operation with powerful Beckhoff control Year of manufacture: 2011 Weight [kg]: 3000 Previous owner: Gedpjz Sq Edsfx Ah Ejbw 1 Availability: Short-term, by arrangement The Tornado+ is designed for high throughput: high feed rate with consistent edge quality, designed for multi-shift operation. It is therefore the machine for companies where the edge banding machine is the pacemaker of production, and downtime directly results in lost units. We will coordinate the equipment, units, and level of automation with you. Compact and versatile. The edge banding machine has been completely overhauled and revised by us. All tools, hoses, chain plates, etc. have been renewed. Fully functional machine.

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Gjdor A Eq Rspfx Ah Ejbw Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: used, Year of construction: 2004, - Data: see the nameplate. Gbodpsy Tndqofx Ah Ejw

Condition: as good as new (ex-display), Year of construction: 2024, pressure (max.): 13 bar, CSA 15/13 SCREW COMPRESSOR, NO. 1,000 Gbodpfxjz Duc Ne Ah Esw MOUNTED ON 500-LITER TANK WITH DRYER AND FILTERS 11 kW, 15 HP MAXIMUM PRESSURE: 13 BAR 400V/50Hz/3-PHASE FLOW RATE: 1147 L/min NOISE LEVEL: 67 dB(A) DIMENSIONS: 1540x665x1535 mm, WEIGHT: 450 kg Attached: User and maintenance manual CE declaration of conformity

Condition: used, Year of construction: 2003, Used Machine Year of Manufacture: 2003 Features and Technical Specifications: - MAGELIS control system - For EVA-based hot-melt adhesive - Joining: 2x1.5 kW, u=12,000, 200 Hz - Trimming: 2x0.2 kW, automatic swivel 0°/3°, 2 carbide-tipped saw blades 140 mm - Flush milling: 2.07 kW, with WPL HF 70 heads, diameter 70 mm - Radius milling: R2 - Radius scraper - Surface scraper - Top glue tank - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8–42 mm - Minimum length: 150 mm - Edge thickness: 0.2–6 mm - Feed rate: 12 m/min - Dust extraction connection: 160 mm Gsdpfx Ahozk Nt Eo Eebw Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Godpfezuyh Usx Ah Ejbw Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.