Screw compressor

CompAir L 160

Condition: used, Year of construction: 2006, x-travel 1.250 mm y-travel 1.000 mm z-travel 1.000 mm Control MillPlus B-axis (head) -10 - +180 x 0,001 ° C-axis (table) 360 x 0,001 ° feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min tool taper HSK 100 spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 38,00 KW max. torque at 40% / 100% load 288 / 187 Nm table surface area Ø 1.100 mm table load 1,50 t toolpiece magazine: chain magazine 120 Stück tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg rotary table speeds infinitely variable 10 - 500 U/min total power requirement 85,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 9,00 x 6,50 x H3,50m m 5-axis turning/milling machining center with MillPlus IT FD control; dual pallet changer; coolant system; coolant through the spindle; chip conveyor; rotating viewing window; electronic handwheel. Ljdpjyui Ncefx Apvehg Spindle new 10/2025 Turning-table overhaul 2022

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Lhsdjxf Iamopfx Apvsg Some accesories and machine equipement are also available. More specs of the machine, check last two pictures.

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Lhsdewzyp Uopfx Apvog Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: used, Year of construction: 2007, x-travel 1.250 mm y-travel 1.000 mm z-travel 1.000 mm Ledpfey E Tvisx Apvshg Control SIN840D pl C-axis (table) 360 x 0,001 ° B-axis (head) -10 - 180 x 0,001 ° rotary table speeds infinitely variable 10 - 500 U/min feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min tool taper HSK 100 spindle turning speed - stepless programmable 20 - 8.000 1/min spindle turning speed - gearbox stage 1 20 - 1.600 1/min. spindle turning speed - gearbox stage 2 1.600 - 8.000 1/min. power capacity at 100 % load 19,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 772 / 492 Nm table surface area Ø1.100 mm table load 1,50 t tool magazine with 180 tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg total power requirement 85,00 kW weight of the machine ca. 32,50 t dimensions of the machine ca. 9,50 x 4,80 x H3,80m m 5-axis machining center with turning function and pallett changer. Control SIEMENS SINUMERIK 840D powerline, Operating Mode 4, Tool-Magazin with 180 places, coolant filter system 980 liter, chip conveyor, coolant through the spindle, RotoClear.

Condition: excellent (used), operating hours: 16,800 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, torque: 822 Nm, controller manufacturer: SIEMENS, controller model: 840D, workpiece length (max.): 1,890 mm, workpiece width (max.): 1,450 mm, table width: 800 mm, table length: 1,000 mm, rotational speed (max.): 6,000 rpm, spindle motor power: 43,000 W, spindle nose: ISO 50 DIN 69871, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MODEL MCH 450 C DOUBLE PALLET 5-AXIS CNC Control: SIEMENS 840D WORKING AREA: X-axis travel (longitudinal): 1600 mm Y-axis travel (vertical): 1200 mm Z-axis travel (transversal): 1700 mm LINEAR GUIDES: Size 55 DRIVE SYSTEM: Diameter x Pitch: 50x25 mm FEED FORCE: X axis (S3-40%): 15,000 N Y axis (S3-40%): 15,000 N Z axis (S3-40%): 17,500 N FEED RATE: Working feed rate (X, Y, Z axes): 1 - 40,000 mm/min Rapid traverse (X, Y, Z axes): 40,000 mm/min Acceleration (X, Y, Z axes): 4.0 m/s² SPINDLE: Front bearing diameter: 100 mm Spindle taper: ISO 50 DIN 69871 Spindle motor power (S1-100% / S6-40%): 28/43 kW from 500 rpm Max torque (S1-100% / S6-40%): 536/822 Nm up to 500 rpm Spindle speed: 45 – 6,000 rpm Positioning: 360° x 0.001° Positioning accuracy Tp as per VDI/DGQ 3441 (angular): s 10 ROTARY TABLE: Positioning: 360° x 0.001° Positioning accuracy Tp as per VDI/DGQ 3441 (angular): s 6 Max clamping weight on pallet: 2,500 daN Max tangential moment: 40,000 Nm Max tilting moment: 34,000 Nm Rotation time 45°: 2.9 s Rotation time 90°: 3.5 s Rotation time 180°: 4.6 s PALLET CHANGER: Coupling surface as per DIN 55201 A1 Pallet dimensions: 800 x 1000 mm Workpiece dimensions: - Positioning diameter in working area x height: 1890 x 1450 mm Pallet change accuracy (X, Y, Z axes): 0.02 mm Pallet change time: 27 s X/Y/Z AXIS POSITIONING ACCURACY: Lsdpjydfcdefx Apvshg Direct measurement with optical scales Positioning tolerance as per VDI/DGQ 3441: 0.010 mm COOLING UNIT WITH ROTARY VACUUM FILTER – HIGH PRESSURE 70 BAR: Coolant tank capacity: 2,500 l Coolant pump 4 bar, flow rate: 230 l/min Coolant pump 4 bar, flow rate: 70 l/min High-pressure pump 50 bar, flow rate: 28 l/min TOOL CHAIN MAGAZINE WZM 100: Tool magazine positions: 100 Max tool length (from spindle nose): 600 mm Max tool diameter (with adjacent tools): 112 mm Max tool diameter (without adjacent tools): 228 mm EQUIPPED WITH: - Chip conveyor (modified for handling very long chips) - Tool breakage detection - Handwheel (for axis control and movement within the working area) - Tool change in masked time (tools can be loaded/unloaded from magazine automatically without stopping the machine program) USED MACHINE YEAR 2007

Condition: excellent (used), 1 used, very well-preserved universal milling head system "HURON" with automatic 2.5° indexing on 1 axis, internal coolant supply through the spindle, and hydraulic tool clamping Manufacturer: CME, Origin Spain Model: FS Spindle mounting: DIN 69871 AD, ISO 50 Maximum speed range: up to 4,000 rpm Maximum drive power: 22/30 kW Weight: approx. 300 kg This high-quality milling head was used as a loaner milling head and was only put into operation for repair purposes while the other milling head was being repaired and overhauled. Siegfried Volz Werkzeugmaschinen Lhodpfsyf Uqtsx Apveg Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2007, operating hours: 40,933 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 8,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 280 C Operating hours: 40.933h Year of construction: 2007 Control unit: Siemens 840D PL Spindle: 8.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Tool magazine / places (Options): Rack / 234 (Operating panel at the tool loading station with terminal) Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 100 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: mechanical Additonal options: Receiver for measuring probe (RENISHAW); interface exhaust system; additional weight for pallets; drill fracture sensing; status lamp; interface exhaust system; integrated tool and collision monitoring; toolshaft cleaning; tool codechip; Interface handheld; Lhjdpjxwpmxjfx Apvsg

Condition: used, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, keyboard, control panel teach pendant Lodpfxji Huvle Apvjhg -Manufacturer: KUKA, control panel control panel -Type: VKCP2-SP -AN: 00-136-938 -SN: 0000036 24V/0.5A/DC -Quantity: 1x panel available -Dimension: 330/320/H120 mm -Weight: 3.2kg

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment Lhsdpfxjfz Nblo Apveg • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information. Additional equipment • PCU 50 • Y-axis • KSA pump Lhsdpfx Apox D R Hgjveg • Hollow clamping cylinder 65 mm • Counter spindle with ejector cylinder • Parts catcher • Discharge conveyor • Sauter star turret with angled tools • Preparation bar loader Machine Benefits Technical Machine Benefits • In the event of sale, some tool holders, including driven tools, would also be sold. Extra Information The machine was completely dismantled, cleaned, checked for all functions, and overhauled by Eichten Werkzeugmaschinen GmbH in December 2023 before it was put into operation. It is therefore technically in perfect condition.