Used Positive Saddle-Mounted Monoblock Unit for sale (43,897)

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod Lhodpfx Apjxvr T Eemsk - Evaporator fans - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Technical data: - max. load capacity 1500 kg - Flat plate diameter 850 mm Lsdpfxerkmaae Apmjhk - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg - Weight of rotating unit approx. 400 kg

Condition: new, - External dimensions (LxWxH): 644x930x863 mm - Application range: -18 ÷ -22°C - Evaporation temperature: -30°C Ibedcvyexvr Upoqi Asd - Condensation temperature: +40°C - Cold room temperature: -20°C - Ambient temperature: 32°C - Defrost: Hot gas - Power supply: 230 V / 1+N ph / 50 Hz - Maximum absorbed current: 13.2 A - Maximum absorbed power: 2.8 kW - Nominal absorbed power: 110 W - Refrigerant: R452A - Output: 1,318 W - Nominal output: 1.9 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø300 mm - Airflow: 1,000 m³/h - Air throw: 6 m - Weight: 89 kg - Volume: 0.80 m³ - Hermetic compressor - Air-cooled condenser - Galvanized sheet body - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (BT models only) - Ambient temperature sensor - End-of-defrost sensor - Condensation control sensor - Power cable for door heater - Micro-switch connection cable - Digital display with temperature indication - Operating status display: - Cooling/defrost - Evaporator fans - Active alarm - Programming keys - Manual defrost button - Audible alarm - Low and high temperature alarm - High condenser temperature alarm (dirty condenser) - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - End-of-defrost time overrun alarm - Faulty temperature sensor alarm - Condensation control sensor failure alarm - Evaporating temperature at -10°C for positive temperature (TN) - Condensation temperature at +40°C for TN - Evaporating temperature at -30°C for low temperature (BT) Lodpoxvr Upsfx Apmjhk - Condensation temperature at +40°C for BT The listing was translated automatically. Translation errors are possible.

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Lhjdofx Hyfspfx Apmjk Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Lhedpfx Apju S Tfgjmok Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1085, Offer 24448 Lhjdewfq Nmspfx Apmsk Technical specifications: - Maximum load capacity 5000 kg - Maximum clamping diameter 1800 mm - Faceplate dimensions 1200 x 1200 mm - Continuously adjustable electrical rotation - Right and left rotation - Electric remote control - Welding current transmission approx. 650 A - Drive 400 V / 2.2 kW - Space requirement approx. W 1500 x H 1650 x D 1300 mm - Weight approx. 2500 kg

Condition: used, Year of construction: 2001, machine/vehicle number: 008147801, Offer 26176 Technical data: - Dimensional stop with digital display 6000 mm - Jaw feed adjustable by handwheel with clamping function - pneumatic stop clamping - Pneumatic connection 6 bar Lodpjzhamdjfx Apmshk - Space requirement approx. L 7700 x H 1350 x D 900 mm - Weight approx. 1200 kg

Condition: new, functionality: fully functional, machine/vehicle number: TKG, cooling capacity: 3.5 kW (4.76 HP), overall weight: 40 kg, input voltage: 230 V, warranty duration: 12 months, type of cooling: air, Monoblock air conditioning units (with exhaust hose), original packaging, for sale. The following sizes are available: 2 kW (BTU 7000) for rooms up to 23 m² – €213.00 2.6 kW (BTU 9000) for rooms up to 25 m² – €272.50 3.5 kW (BTU 12000) for rooms up to 35 m² – €390.00 3.5 kW (BTU 12000) for rooms up to 35 m² with WIFI – €451.00 Shipping within Germany per unit: €25.00 Manufacturer: KALORIK All prices incl. VAT. Lodswwrk Aopfx Apmehk

Condition: good (used), Year of construction: 2010, total length: 1,600 mm, total width: 1,900 mm, total height: 3,200 mm, overall weight: 600 kg, For Sale: Dosing unit / flour discharge point from Kaak / Silowacht Lhsdjzv S Nmjpfx Apmjk Brand: Kaak / Silowacht Type: flour discharge point Year of construction: 2010 The height is adjustable, the total height is approximately 3.20 meters. The flour discharge point can be mounted on a pole / column. Diameter of the lower filling point: 99 cm Maximum weight of flour: 100 KG Included: - weighing hopper for flour / meal - load cells - water weighing hopper unit - filter unit - pneumatic valves - level gauges - liquid yeast meter, valve and connection - Siemens S7-1500 (Siemens control system) - piping, if required It is possible to inspect this machine on-site. If you have any questions or comments, please feel free to contact us.

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, Tool changer with 60 positions Spindle speed 12,000 rpm Heidenhain iTNC 530 control unit Internal coolant supply (ICS) Chip conveyor Lhsdpfx Ajzva Uwepmsk 3D quickset

Condition: used, functionality: fully functional, machine/vehicle number: SG74S34001, Year of construction: 2017, operating hours: 7,431 h, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, input current: 30 A, HP MULTI JET FUSION 4200 ADDITIVE MANUFACTURING SYSTEM Located in ALBACETE, SPAIN 7,431 print hours · 2 build units · Tested and functional From a professional service bureau that has now closed. Series production of end-use parts in PA12 nylon. === THE SYSTEM INCLUDES === Lhodpfey U H Idjx Apmjk HP Jet Fusion 3D 4200 printer — S/N SG74S34001, P/N M0P44B, built 04/05/2017 HP Jet Fusion 3D Processing Station (powder processing) Build unit 1 — S/N SG74C35005, P/N M0P45B, built 04/05/2017 Build unit 2 — S/N SG74R35003, P/N M0P45B, built 27/04/2017 Extraction system and external powder collection container HP 3D High Reusability PA12 powder in stock, part factory sealed === ACTUAL USAGE DATA === Read directly from the machine's Printer Information screen: Print time: 445,886 minutes, approx. 7,431 hours Jobs: 718 total, 590 completed successfully Layers printed: 2,800,493 Volume printed: 1,308 litres Fusing lamp calibration: valid Material run: HP 3D High Reusability PA12 Last job on record: 1 July 2025 === SERVICE POSITION === The HP service contract has EXPIRED. The buyer will need to arrange service and, where HP requires it, recertification on relocation or change of ownership. That cost is not included in our price and is worth budgeting for. The machine has been standing since July 2025. We cannot warrant printhead condition after that time; it would be sensible to plan on replacing them. The agent cartridges are effectively empty (0.2 cc fusing, 0.2 cc detailing). The intermediate tanks hold approx. 1,470 cc and 1,142 cc. HP discontinued this model in October 2024, with supplies and support committed through October 2029. The price reflects this position. === TECHNICAL DATA === Manufacturer: HP Model: Jet Fusion 3D 4200 Year: 2017 Technology: Multi Jet Fusion (MJF), powder bed Printer supply: 9 kW, 220-240 / 380-415 V, 30 A, 3W+N+PE Build unit supply: 3 kW, 200-240 V, 16 A, single phase Approvals: UL E165854, CE, FCC Part 15, EAC Printer dimensions: 2,210 × 1,238 × 1,448 mm === APPLICATIONS === Series production of end-use parts, short and medium runs, functional prototyping, automotive, consumer goods and tooling. High Reusability PA12 allows unfused powder to be recycled between jobs. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE2-HP Serial numbers, plate photographs and the Printer Information screen are available in the attached documents.

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm Ledpfeyil A Sjx Apmshk

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Throughput (depending on material, bulk density, and recipe): 200 - 300 kg/h Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating Heating processing temperature: over 300°C possible MACHINE DETAILS Drive Drive power: 45 kW Voltage: 380 V Frequency: 50 Hz Rated current: 84.2 A Speed: 1,480 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – continuous operation Sound level: 71 dB(A) Year of drive manufacture: 2022 Star/delta connection possible Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Lhodpezr Hz Aofx Apmsk Operating hours: 10 h EQUIPMENT Metering device Hopper for material feed Large filter / screen changer Adapted die

Condition: used, Year of construction: 2018, Used Filling Monoblock for beer 800 bph Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter between 50 and 90 mm. It processes 600 to 800 bottles per hour. The installed motor delivers 1.5 kW of power. Additionally, the design allows rapid changeovers between bottle formats, which enhances production flexibility. Isobaric Filling with Double Vacuum The BFP-12 filling unit, at the heart of the Used Filling Monoblock for beer 800 bph, includes 12 filling valves and applies an isobaric process with double vacuum. Specifically, the system performs two evacuation cycles and CO₂ reinjections before the filling stage. Consequently, it significantly reduces residual oxygen and preserves beer quality. It supports bottle volumes from 250 to 1000 ml. Furthermore, the unit integrates key components such as a Southern Pump, a Mitsubishi PLC, a THINEDA touchscreen, Korean-made sensors, and AUTONICS pneumatic systems. This machine also operates with a 1.5 kW motor. In terms of control, the electrical interface provides real-time adjustments, thus improving accuracy during production. Lhsdpfsw Tlz Ejx Apmsk Crown Capping Machine ZDS-3 The crown capper of the Used Filling Monoblock for beer 800 bph applies metal crown caps to glass beer bottles. The machine includes 3 capping heads and operates with a continuous rotary motion. It handles bottles up to 330 mm in height and caps with diameters from 20 to 30 mm (cP size), compatible with the normal European neck type. Notably, the capper reaches up to 1500 bottles per hour, thereby providing an operational buffer that prevents bottlenecks downstream of the filler. In comparison to standard cappers, this model delivers greater precision and cap stability. In addition, its robust frame reduces vibration during high-speed operation. Electrical Characteristics and Compatibility The machines in the Used Filling Monoblock for beer 800 bph use reliable and industry-standard electrical components. The full line features an estimated total power consumption of approximately 4.5 kW. From an integration standpoint, this makes the system suitable for facilities with medium energy capacity. The system exclusively handles 0.5-liter glass beer bottles. During operation, it performs filling under controlled pressure to preserve CO₂ levels and ensure the product’s final stability. Overall, the system delivers consistent performance, reduced oxygen pickup, and excellent packaging quality. Lastly, the compact footprint simplifies installation even in limited space environments.

Condition: used, mileage: 387,119 km, power: 427 kW (580.56 HP), first registration: 05/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.580 4x2 LL GX Tractor Unit | Long Haul | Full Option 3 units available Cabin & Comfort Cab type: GX – extra high, wide, long * Comfort cab suspension * Additional thermal insulation for cab * Additional acoustic insulation for cab * Electric cab tilt device * Roof spoiler + side flaps * Electric glass sunroof * Air-suspended comfort driver's seat * With lumbar support * Shoulder adjustment * Leather/partial leather * Driver's seat with climate control * Comfort armrests for driver’s seat * Vario co-driver’s seat * Swiveling, foldable, unsprung * Comfort armrests for co-driver's seat * Leather multifunction steering wheel * MAN ComfortSteering * Digital instrument cluster 12.3" Virtual Cockpit * Electric stationary air conditioning * Climatronic air conditioning * Additional water heater 4kW * Upper & lower sleeper berth (comfort beds) * Pull-out refrigerator * 230V socket in cab * Several 12V / 24V / USB connections * Electric sun blinds Infotainment & Connectivity MAN Media System Professional Navigation 12.3" * European navigation * MAN SmartSelect control * MAN Advanced sound system with subwoofer * Smartphone integration * Online traffic information * Digital tachograph with remote download * Connectivity board module Lighting & Visibility * LED main headlights * LED daytime running lights * LED fog lights * LED cornering lights * High beam assistant * Automatic driving light control with light sensor * Headlight cleaning system * LED tail lights * Rear work lights * Acoustic reverse warning * Stainless steel lamp bar with additional spotlights * Sun visor, Individual Lion design, front windshield * Automatic wiper operation with rain sensor (wiping automation) Safety & Assistance Systems * Adaptive cruise control ACC Stop & Go * Emergency brake assist EBA * Lane departure warning * Lane change & turning assist LCS * Lane return assist LRA * MAN Attention Guard (drowsiness detection) * ESP / ASR * Speed limiter * MAN EfficientCruise * MAN EasyStart (hill hold assistant) * Electronic parking brake * Disc brakes front and rear axles Technical Data * Diesel engine: MAN D3876 LF11 * Power: 427 kW (580 HP) * Torque: 2,900 Nm * Emission standard: Euro 6d * Gearbox: MAN TipMatic 12-speed automatic * MAN EfficientRoll gearbox function * MAN Idle Speed Driving gearbox function * Rock-free function * MAN TipMatic drive programs * Efficiency Plus (without kickdown function) * MAN TipMatic Performance and Efficiency up to 70,000 kg * MAN TipMatic Manoeuvre, shunting mode * Retarder: MAN Retarder 35 Eco Cool * MAN EVBec high-performance engine brake * Speed-dependent, multi-stage, energy efficient * Minimal heat input into coolant * Maximum speed: 90 km/h (electronically limited) * Differential locks on driven rear axles * Suspension: air/air (front and rear axles) * Rims: Alcoa Dura-Bright EVO aluminium * Cab colour: Rapeseed Yellow RAL 1021 Semi-trailer & Interfaces * PTO, gearbox-dependent, type NH/4b, with flange, f=0.97, position approx. 2:30 * PTO, gearbox-dependent, for short-term operation < 60 min * PTO, gearbox-dependent, switchable * Fifth wheel: JOST JSK 42 (2") * 150 mm mounting height * Automatic fifth wheel lubrication Lhsdpfey T Ulbex Apmok * Trailer brake connectors (2-line) * 15-pin trailer socket * ABS socket * FMS & KSM interface * Prepared for lift-/tag-axle trailers Other Equipment * Safety package

Condition: used, mileage: 300,000 km, power: 390 kW (530.25 HP), first registration: 11/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, We are very pleased that our offer has aroused your interest, and we assure you that you will be able to purchase a good and affordable vehicle with a verifiable service history at our dealership! Special equipment: Axle load measuring device, front axle load 8.0 t, audio system: digital radio DAB / DAB+, equipment package: climate control, automatic climate control, additional thermal insulation, battery 220 Ah (AGM), equipment package: safety, driver-side airbag, right exterior mirror with maneuvering setting, CB radio, interactive cockpit multimedia system, navigation system, remote online function, aluminum compressed air tank, compressed air horn, electrical pre-installation in the cab 24V / 100 A, cab: with air suspension, suspension: front springs 8.0 t, 2 leaves, vehicle without MirrorCam exterior mirror camera, vehicle without radiator grille, vehicle without aerodynamic underbody panel, luggage compartment on the upper rear wall, gearbox 12-speed - type: G 281-12, electric sunroof, integral rear, mudguards 3-part, cooler box / refrigerator, aluminum alloy rims 9.00x22.5 (ALCOA matte), roof air deflector (lockable) and side air deflectors, 2-cylinder air compressor, mounting plate / saddle plate 40 mm for 20 t saddle coupling, enhanced engine brake, auxiliary drive MB 131-2c, PremiumComfort mattress (lower bunk), frame lowering with air spring pressure regulation, frame overhang 1050 mm, smoker's package, reversing warning device (acoustic warning signal externally), saddle coupling: manually lubricated, fleet management system interface, drawers under the dashboard, fuse box, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat Dinamica fabric, seats in the cab: armrests on both sides of the passenger seat, seats in the cab: driver's seat suspension seat with climate control, sun visor (external), electric sun blind for windshield, sun blind for side windows, driver and passenger door, sun blind for side window, driver's door, sound system, storage compartment outside left, additional 12V socket, 24V / 15 A socket in the storage compartment on the right-hand side, 24V / 25 A socket in the passenger footwell, carpet on the engine tunnel, door extension for the cab, preparation / switch for lift axle on the semi-trailer / trailer, preparation for work lights on the upper rear wall of the cab, preparation for rotating beacon, straight front axle, curtain for the sleeping cabin, seat belt warning device Lhodpfxjvtv Huo Apmjk Additional equipment: Emission standard EURO 6, storage compartment above the windshield with a lid, axle configuration: 4x2, Actros 5, Actros L cab, heated approach / front mirrors, low-mounted trailer electrical and brake connection, 24V / 15-pin trailer socket, step on the cab on the left, exhaust pipe to the right outside, equipment package: Powertrain 2, batteries arranged side by side, differential lock on the rear axle, compressed air connection in the cab, compressed air unit with condensate monitoring, medium compressed air unit, automatic activation for driving lights (light sensor), cab: fixed cab entry, cab: interior package chrome, cab: hydraulic tilting device, cab: L ClassicSpace, 2.30 m, tunnel 170 mm, cab variant: ClassicSpace, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab: height 600 mm, cab variant: L, storage compartment outside right, front bumper corners in plastic design, cockpit multimedia, radiator grille, air intake on the side of the cab, vehicle outline lig

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Lodpfx Apsyc H I Ssmehk Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: good (used), Horizon ED-40 Standing Delivery Unit Manufactured by Horizon, Japan. Can be connected to any Horizon folding machine, but also works with Heidelberg, Herzog Heymann, MBO, etc. The device also operates independently of the folding machine. Infinitely variable delivery speed adjustment. Height adjustment. Package counter with shifter. Format: min 20mm max 110mm Lhedpfx Aszurzaepmok

Condition: used, mileage: 452,537 km, power: 175 kW (237.93 HP), first registration: 03/2012, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: semi-automatic, emission class: euro5, loading space length: 5,600 mm, loading space width: 2,480 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, crane, soot filter, Mercedes-Benz 1624 Atego Flatbed + Amco Veba Crane 4x2 Suspension: Leaf-air Wheelbase: 4.50 m Payload: 6,830 kg Amco Veba Crane Model: V815 3S 4x hydraulic extensions 2x hydraulic stabilizers 1x remote control 5th and 6th control units Special features: - Storage compartment on engine tunnel - Audio system: CD radio - Electric windows - Urea (AdBlue) tank: 35 liters - Rear lights for mounting tail lift - Fuel tank: 180 liters, plastic - Roof air deflector - Mercedes-Benz PTO 2C - Mercedes-Benz PTO 60-2C with MPA - Programmable special module - Frame extension – rear overhang - Side-mounted spare wheel carrier - Reverse warning buzzer (external alarm) - Cab seats: Comfort driver's suspension seat - Rear mudguards with splash guards Lhsdpfx Apoy Hyp Ssmok - Heat-insulating glazing Additional equipment: - Axle configuration: 4x2 - Electrically adjustable and heated exterior mirrors - 115 Ah battery - Cockpit distributor - Roof hatch (steel) - Cab: S (short) - Suspension: leaf/air - 80 A alternator - 6-speed gearbox - Type: G 60-6 - Urea (AdBlue) tank: plastic - Rear axle: H 4, ring gear 368 - LS 6 / LS 8 power steering - Interior filter: pollen filter - Body/chassis: chassis frame - Atego 2 model update - Engine: 6.4 liters – 175 kW diesel (OM 906 LA) - Engine start/stop system - Engine brake with constant throttle - Wheelbase: 4760 mm - Disc brakes - SCR system (AdBlue technology) - Side underrun protection - Cab seats: fixed single passenger seat - Rear axle stabilizer - Fixed rear underrun protection - Front underrun protection - Immobilizer - Perm. gross vehicle weight: 16.00 t We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, suction capacity: 30,000 m³/h, filter area: 152 m², actuation type: electric, total height: 3,500 mm, total length: 5,855 mm, total width: 1,920 mm, overall weight: 1,480 kg, Equipment: documentation/manual, The HOLZING RLA 1000 VIBER Power industrial stationary dust extraction unit is an advanced dust collection device designed for large production facilities and woodworking plants. Its design allows for outdoor installation, maximizing the use of space inside the production hall. Thanks to the integration of modern Viber Power technology, the unit continuously monitors operating parameters and automatically tracks the filter contamination level. The use of sound-absorbing enclosures for the fans effectively reduces noise generation, and the special blade geometry ensures maximum energy efficiency and stable vacuum pressure. Ledpfxjzv Sx Ij Apmshk

Condition: ready for operation (used), Year of construction: 2000, There are 13 LTA Type IR dust extraction systems available. They are from various production years (1997-2001), but are all the same type. The systems will be dismantled in week 35 and will then be available for delivery. The ionizer and collector will be cleaned in an ultrasonic bath, and the housing will be wiped down. More systems will become available in the coming months. 20 x LTA AC3001 R, production years 2004-2011. Ljdpfx Aezv Ttajpmehk

Condition: used, mileage: 80,272 km, power: 260 kW (353.50 HP), first registration: 07/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: yellow, gearing type: automatic, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Mercedes-Benz 1835 Arocs 5 + MEILLER 3Skipper Fassi F125A 4x Hydraulic Extension 4x2 Suspension: Leaf / Leaf Wheelbase: 3.90 m Payload: 7,345 kg Meiller 3Skipper Type: D9 Fassi Crane mounted behind cab Type: F125A.2.24 5x hydraulic extensions 2x hydraulic stabilizer legs Special equipment: Lsdpfxoy Scp Ej Apmehk High engine tunnel storage, Front axle load 8.0 t, Driver’s airbag, Audio system: digital radio DAB / DAB+, Access with rooftop handrail, Passenger side mirror with maneuvering position, Battery 220 Ah, Interactive multimedia cockpit, Air horn, Driver assistance system: autonomous emergency brake assist (Active Brake Assist 5), Driver assistance system: lane keeping assist, Driver assistance system: traffic sign recognition, Cab: reinforced rear suspension, Cab: steel sprung, comfort, Suspension: rear springs 13.0 t, Suspension: front springs 8.0 t, 3-leaf, Remote query function Remote Online, Parking brake additionally on front axle, Vehicle without protective plate under front bumper, Speed limiter, Rear axle crown wheel 300, Hydraulic pump (Meiller pump - 7 pistons - 270 / 63), Interior filter for construction vehicles, Rear mudguard half-shells, Fuel filter heated, Fuel tank: 290 l aluminum, left, Reinforced engine brake, Navigation system, PTO MB 123-10c, Programmable special module, Wheelbase option 3900 mm, Chassis overhang 1200 mm, Smoker package, Rain sensor, Acoustic reverse warning (external warning signal), Rear window, Seat cover / upholstery: passenger seat velour, Seat cover / upholstery: driver seat velour, Seats in cab: driver's comfort air suspension seat, External sun visor, Sun protection blind side window, driver’s door, Steel wheels 11.75x22.5 (front axle), Extra 24V socket in passenger footwell, Front underride protection, Preparation for work lights, rear of cab top Additional equipment: Emission standard EURO 6, ABS switchable, Axle configuration: 4x2, Starting/front mirror heated, Trailer brake 2-line system, Connections left, Trailer socket 24V / 15-pin, AP axle (outboard planetary drive rear axle), Arocs 5, Exhaust tailpipe to vehicle center, Batteries arranged side by side, Compressed air connection in cab, Steel air tank, Air system with condensate monitoring, Medium air system, Automatic driving light activation (light sensor), Cab: movable cab entry, Cab: hydraulic tilting device, Cab: M ClassicSpace, 2.30 m, 320 mm tunnel, Suspension: leaf / leaf, Electric window lifters, Tinted windscreen, Alternator 100 A, Transmission 8-speed - Type: G 140-8, AdBlue tank: 60 l, Manual roof hatch (steel), Central locking system, Multifunction steering wheel, Steering oil cooling, Front air intake, 1-cylinder air compressor, Heated air dryer, Engine 7.7 l - 260 kW R6 diesel (OM 936), Engine variant OM 936, Ramp mirror, Residual heat utilization, Disc brakes with full protection, Disc brakes front and rear axle, LED side marking lights flashing, Seats in cab: passenger functional seat, Rear axle stabilizer, front axle stabilizer, 12V socket in passenger footwell, Front bumper corners in steel design, Truck Data Center 7 (fleet management system), Fixed rear underrun protection, Preparation Truck Data Center (fleet management system), Straight front axle, Gross vehicle weight 18.00 t, Transmission oil cooler We are also happy to assist you with financing/leasing solutions in cooperation with our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, mileage: 722,540 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Vehicle equipment and technical details: General information: * Chassis type: S 500 A4x2EB * VIN code: YS2S4X20005553872 * Maximum permissible gross vehicle weight: 18 tons ---- Technical data: * Product class: Truck * Wheel configuration: 4x2 * Wheelbase: 3600 mm * Chassis width: 2600 mm * Chassis height: extra low * Front axle load, technical: 7500 kg * Rear axle load, technical: 11500 kg * GVW, legal: 18,000 kg * GVW, technical: 44,000 kg * Maximum permissible gross vehicle weight, technical: 19,000 kg * Emission level: Euro 6 * Engine: DC13 155/500 hp, 368 kW (500 hp), displacement: 13 liters * Transmission: GRS905R, Opticruise, TMS2 * Retarder: Scania R3500 * Front axle tire size: 355/50 R22.5 * Rear axle tire size: 295/60 R22.5 * Rim material: Aluminum * Front axle rim type: 22.5x11.75 Aluminum Alcoa DuraBright Lodpfxoyv Uh Io Apmjhk * Rear axle rim type: 22.5x9.00 Aluminum Alcoa DuraBright * Braking system: EBS7, electronic, ABS/EBS: 4S/4M * Hill hold: available * Air tank capacity: front 70 dm³, rear 30 dm³ * Suspension system: Air suspension front and rear, extra low air suspension height front * Leveling system: fast, truck and trailer * Steering gear: ZF 8098, ratio: 17-20:1, adjustable steering wheel (tilt + slide) * Speed limiter: 89 km/h (legal 90 km/h) ---- Cab: * Type: CS, length: 20 dm, roof height: high * Color: Ebony Black * Windshield: tinted, with rain sensor * Air conditioning: automatic, with auxiliary heater (WTA cab heater 3 kW) * Sunroof: electric * Cab mounting: Air Comfort * Driver and passenger seat: Premium, leather black, driver's seat with adjustable backrest and seat ventilation * Lower bunk: extendable from 800 to 1,000 mm, mattress: pocket spring * Upper bunk: width 700 mm, with safety net * Bluetooth: available * Navigation: with topographical map data for Europe * Audio system: AUS4 * USB ports: dashboard, passenger side, driver and passenger side, rear wall * Headlights: LED, fog lights: LED (3 diodes), daytime running lights: LED * Rearview mirrors: electrically adjustable and heated, spherical, driver/passenger side * Storage compartments: driver/passenger side, refrigerator box rear lower on driver's side, drawer rear lower passenger side ---- Additional equipment: * Fifth wheel coupling: +GF+ SK-S36.20 2/128, position: -510 mm * Mounting plate: 22 mm, D-value max 152 kN * Rear splash guard: plastic, length 96 mm * Spray suppression device according to EU 109/2011: included * Front mirror: electrically adjustable and heated * Horn: compressed air 118 dBA * Trailer brake coupling: ISO type, 1x15-pin connector ---- Certificates: * Advanced Emergency Braking: E4 - 131R - 010008 EXT.05 * Lane Departure Warning System (LDWS): E4 - 130R - 000010 EXT.04 * Speed Limiter: E4 - 89R - 000069 EXT.13 ---- * Front axle tire dimension: 355/50R22.5 * Rear axle tire dimension: 295/60R22.5 * Fuel tank: 450 + 450 liters * AdBlue tank: 96 liters * Technical total weight: 19000 kg * Tare weight: 8227 kg * Permissible trailer load: 26470 kg * Total length: 5810 mm * Wheelbase: 3600 mm * Next inspection due: 07.2027 * Engine operating hours: 12513 hours ---- Vehicle number: 11934 ---- Errors and prior sale excepted ---- Advertisements and various lettering have been digitally removed. ---- We will gladly assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you, for an additional fee...

Year of construction: 2020, condition: good (used), Gough Engineering Sieving station and filtration unit Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph Lodezvlk Dspfx Apmshk

Year of construction: 2020, condition: like new (used), functionality: fully functional, The Regloplas P140XS temperature control unit is for sale. Medium: Water Heating capacity: 3 kW Cooling capacity: 38 kW Lsdpfx Ajzvur Dopmjhk Maximum flow rate: 11 l/min Weight: 25 kg Dimensions (W/H/D): 143/420/520 mm