Used Platit Pvd Coating System for sale (41,207)

Year of construction: 2023, condition: ready for operation (used), A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible. Dwjdszhb Hlepfx Al Ajc

Condition: used, The item comes with a selection of spare parts, including: bellows segments, graphite sheets, capacitor transmitters, centering rings in various sizes, Pirani transmitters, inline valves, various cables, and more. Djdpezgv R Nefx Al Ajwc

Condition: used, Year of construction: 1999, functionality: unexamined, Good day, Dodpfx Aljy D Uphs Aswc For sale is a sputtering system for glass manufactured by Beijing Instruments Factory / JDS, model JDS800. The system utilizes the Physical Vapor Deposition (PVD) process to horizontally deposit coatings onto substrates. The unit measures approximately 5 meters in length and 1 meter in width. The substrate size is about 400 x 420 mm. Please refer to the photos for detailed dimensions. The system is complete with various power supplies, fore-vacuum pumps, and a turbomolecular pump. Technical drawings are available, along with several folders containing technical documentation. The machine was disconnected from the mains in working condition. Dismantling and transport are the responsibility of the buyer.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, Number of heating elements: 4 Power (per heater): approx. 10 kW (230 V/400 V) Max. temperature: 700 °C Max. process temperature: 600 °C Thermocouple: Type K Temperature control: PLC software-based regulation Thyristor controller: AEG Thyro 1A-230-60H Cooling (chamber): Dsdjy Htgwspfx Al Aowc Consumption 2: (4.0...8.5) m³/h Inlet temperature: (15...18) °C Outlet temperature: (20...28) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l Cooling (evaporator): Consumption 3: (1.5...2.5) m³/h Inlet temperature: (6...10) °C Outlet temperature: (12...15) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Dsdjzlh Auspfx Al Aswc Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Year of construction: 2019, condition: good (used), Sturm Coating Coating System For sale is a complete industrial Sturm robotic painting system from 2019. The automated coating system was used for series production coating of components and comes from an industrial production facility. The used painting line consists of, among other things, a painting booth, drying and cooling zones, conveying technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust gas cleaning system. Due to the automated system design, the robotic painting system is particularly suitable for industrial applications in the automotive industry, metal processing, and series production. Technical Data & Scope of Supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of construction main system: 2019 Previous operation: 3-shift operation (condition corresponds to age) System components: Units, drying and cooling zone, painting booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of construction 2006–2012) Associated robot control cabinets Dwsdpfx Alozka Sfe Asc 2x Yaskawa robots EPX 2900 1x Thermal post-treatment / exhaust gas cleaning system (VeniaKab / RNV) Condition notes: Control technology: According to the factory maintenance department, it is state-of-the-art. Electrical & mechanical: Mostly in a condition appropriate to its age or good condition. Cyber security data deletion: For security reasons, all hard drives of the robots and PC-based stations have been removed. "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-Recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robustly built and, thanks to the generous manual coating opening, is ideally suited for manual operation (hand coating). Technical data & connection values: • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) Dwsdez N Aivspfx Al Aoc • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For enamel powder: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is drawn downwards The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be directly reprocessed and reused in the cycle (enormous material savings!) • Cleaning unit: Unit mounted on top, including solenoid valve cover and sealing frame • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire suppression system (fire protection system) Item location: 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important collection & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer on site. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500 net (plus VAT). "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2022, condition: good (used), PLP MT100 Paddle coating machine 2022, Stainless, The coating system MT is a complete machine able to mix in line pellets, kibbles, and other granulated products with additives such as liquid enzymes, fat, digest, aromas, oil, medicines, vitamins, complete with two shafts and adjustable paddles to mix and hold the product, capacity up to 50T per hour, with twin 5.5Kw motors, with heating, comes with 1500Kg buffer holding tank, infeed conveyor, paddle coater and outfeed conveyor Dodpfx Asz I Dtfol Aowc

Year of construction: 2018, condition: good (used), Gimon RG1000.2000 Drum coating system Serial: 14214 2018, Stainless, consists of 1100L stainless hopper on weigh cells, feeds onto continuous conveyor scale, feeds into Gimon disc coater and into Gimon drum coater fat drum, also comes with 1000L stainless IBC previously used for oil, Dodpfx Aoz I Dt Sjl Aowc

Condition: used, Powder coating booth with multi-cyclone and afterfilter For sale is a professional, complete industrial system for powder coating: A Gema Volstatic powder coating booth, type MRS (multi-cyclone recovery system with afterfilter). Djdoz Nyqwjpfx Al Ajwc This system represents the highest Swiss quality, extreme robustness, and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideally suited for industrial companies, powder coaters, or workshops looking for a powerful and reliable system. Technical data: • Manufacturer: Gema Volstatic • Type: MRS (multi-cyclone and afterfilter system) • Electrical connection: 3 x 380 V / 50 Hz • Equipment: Booth base with inlet, manual coating opening, and gun travel slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection container. • Extraction / Afterfilter: Powerful fan unit with integrated pressure monitoring and automatic flushing air filter cleaning. • Fan power afterfilter:   15 kW with 12 filter plates (air volume flow: 8000 m³/h)   22 kW with 16 filter plates (air volume flow: 12000 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) or 4.5 kPa (at 12000 m³/h) • Compressed air connection: Min. 6 bar / Max. 10 bar (Recommended: 7 bar) • Compressed air consumption (flushing air filter box): Max. 18 Nm³/h • External dimensions: approx. Height 3.20 m × Length 8.50 m × Width 1.84 m • Internal dimensions (usable space): approx. Height 2.40 m × Width 1.84 m Item location: • 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important pickup & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer on site. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500.00 net (plus VAT). “Everything from one source: We would be happy to offer you a suitable bank financing option for your project.” More items - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2023, functionality: fully functional, paper width (min.): 2,100 mm, paper height (max.): 120 mm, total length: 3,300 mm, total width: 3,500 mm, total height: 2,100 mm, Bürkle LFC 2100 Liquid Coating System Dwodpfx Aey Szwuol Ajc Object: For liquid coating of digitally printed media. Suitable for applying primers or protective coatings, as well as for the full-surface finishing of digitally printed media in a continuous process using solvent-free UV coatings and direct coating curing using UV radiation from above. Condition: Like new (date of purchase 2023) Availability: Immediately Brief Description For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was acquired from the company Welte in 2023 and has only been in operation for a few hours since then. It is in excellent optical and technical condition (demonstration condition) and offers a first-class solution for UV finishing of large-format prints. The machine also includes a cleaning or washing unit with extraction, as well as a second roller (smooth roller). Technical Data & Highlights Maximum working width: 2,100 mm Substrate thickness: Flexibly adjustable up to 80 mm Throughput speed: Continuously adjustable (up to 25 m/min) Drying: Includes a powerful UV drying unit (TRUV) for immediate further processing Control: Modern control panel for precise process control Asking price €150,000 (negotiable) plus VAT | ex works (EXW) Contact & Inspection The system is still assembled and can be inspected and tested on site after prior appointment. (Location: St. Martin bei Lofer, Austria)

Year of construction: 2019, condition: ready for operation (used), A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible. Dwodpfx Aoytgpqol Asc

Condition: good (used), Year of construction: 1990, functionality: fully functional, For sale is a complete, fully operational powder coating system, year of manufacture 1990. Over the past few years, numerous system components have been modernized or completely replaced and upgraded. The system was decommissioned in Q1-2025, but can be reactivated and operated at any time if required. All components remain on standby and can be started up and demonstrated on site. Dsdpsw Ek Ntsfx Al Aewc The system features one manual and two automatic spray booths (which can be operated simultaneously). The maximum workpiece dimensions that can be coated across all booths are 7000x2300x800 mm. The entire conveyor system is supplied by CSF. All system controls, including a visualization system, all control cabinets, all frequency inverters, as well as many other components have been completely renewed within the last 5–7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Price on request!

Year of construction: 1989, condition: ready for operation (used), Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m³/h, acidic/alk. 19,450m³/h, dissipated heat quantity: approx. 80,000kcal/h, the system has been emptied of all substances, transformers are free from hazardous materials, complete documentation available. An on-site inspection is possible. Dwodpfx Alsy T N Iqs Aec

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine Dedpfx Aszhv Rlol Aewc -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Dwsdozqur Hjpfx Al Ajc Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support BUMEX also provides: powder coating booths Dodpfx Ashfv D Sjl Aowc dust extraction and filtration systems industrial ventilation systems professional technological consulting Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times possibility of manufacturing machines in custom configurations and dimensions

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Djdsun Sd Uepfx Al Ajwc Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Dsdpfx Aswmm U Uel Aowc

Year of construction: 2019, condition: used, LAS coating system, Erlaser Clad, year of manufacture 2019. Dwjdpjzvwc Sjfx Al Aec

Condition: good (used), Paint roller machine, roller coating machine, powder coating system -Drying and exhaust air: used for slat/blind production -Dimensions: 2950/800/H1920 mm -Weight: 484 kg Dwodpfogal Agex Al Ajc

Condition: used, Year of construction: 2018, operating hours: 4,717 h, functionality: fully functional, machine/vehicle number: 222319, total height: 6,500 mm, total length: 18,500 mm, total width: 12,500 mm, type of input current: three-phase, temperature: 250 °C, operating temperature: 250 °C, space requirement height: 6,500 mm, space requirement length: 19,000 mm, space requirement width: 12,500 mm, heating capacity: 30 kW (40.79 HP), year of last overhaul: 2023, Equipment: documentation/manual, emergency stop, lighting, We are selling our dipping conveyor system, which was installed in 2018 by Forplan AG. The system is fully functional and was used until 2022/2023 to overcome capacity bottlenecks, allowing for approximately single-shift operation. There are 4 sets of baskets (16 in total) for the system, with different wire diameters, making it suitable for smaller connecting elements, stamped, and bent parts that can be coated as bulk material. After prior arrangement, the system can be inspected at any time. Dwodpfx Aljzkt I Tj Aec

Condition: used, Year of construction: 1990, Paint/coating application system Dwjdpfjzuzqdjx Al Ajc Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2027, MANUAL POWDER COATING PLANTS AND SYSTEMS Our design department will give you the best customized powder coating line solution which meets your product capacity demands. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Dedpfx Aovv Nuqsl Aswc * Office in France and Germany, Contact us for more information and quotations

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 11176, We are offering this used CemeCon CC 800/9 HIPIMS Magnetron Sputtering PVD System, year of manufacture 2006. Manufacturer: CemeCon Model: CC 800/9 Serial number: 11176 Year of manufacture: 2006, upgraded in 2013 and 2025 Weight: 3,000 kg Protection rating: IP 20 Power rating: 166 kVA Evaporators: 6 Voltage: 3x400/N/PE V Frequency: 50/60 Hz Cemecon CC800/9 HIPIMS - 6 cathodes - All cathodes DC, 2 also HIPIMS capable - Booster anodes - 4 gases, 1 of which is flammable - BIAS: DC, MF-pulsed, or HIPIMS - 3x heating - 2 turbo pumps - 6-position substrate holder Dwsdpfx Aljx Tt T Ro Ajc - Multiple targets - Includes option for BNC terminal for Peak I, U, and P at HIPIMS cathodes + BIAS - Extensive accessories such as loading material, spare parts, consumables - In 07/2023, the system control was upgraded to the latest standards and a manufacturer service was performed. A bundle option is also available including a chiller, a precision substrate cleaning system, and a lapping/polishing machine. If you have any questions or require further information, please feel free to send us a message or call us.