Used Pee-Wee P10Cnc for sale (1,007)

Condition: excellent (used), Year of construction: 2018, thread length: 120 mm, overall weight: 2,200 kg, total height: 1,800 mm, total length: 1,800 mm, total width: 1,300 mm, Treading machine PEE-WEE - P10CNC MACH-ID 9816 Make: PEE-WEE Type: P10CNC YOP: 2018 Roll set M14 x 1 PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 Left PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNF PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNJF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNJF PPS Ø 180 x 54 hole x 40 width 1 set universal linear guider 120 mm 1 set steady rest for to heavy workpiece 1 set HM support length 40 mm for 1/4, 5/16 and M14 Rolls 2 x cabinet with tool drawlers and work bench Miniumum pressure: 1T Maximum pressure: 10T Max. workpiece: 40Ø Min. workpiece: 3Ø Min. Threading lenght:20mm Max. Threading length:120mm Shaft Ø: 54mm Length: 1800mm Width: 1300mm Height: 1800mm Weight: 2200kg Bedpfx Amez Ha Hljrsdh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Bjdpfxeuz If Nj Amredh Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Bjdpfx Amsh A S Htorsdh Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: new, Thread rolling dies for various rolling machines, including UPW, UPWS, P10, P60, and ORT, with bores of 28 mm, 54 mm, 63 mm, 69 mm, 85 mm, 80 mm, 100 mm, and 110 mm. The dies can be ground to the desired thread profile. A list of available dies can be found in the image gallery. Price in EUR per set (2 pieces). Bodszfybcepfx Amrjdh

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, stroke length: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Bjdpfx Amjxbfwzsrjdh Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: good (used), Year of construction: 1975, Pressure: 250 t Bjdoz Hbcuopfx Amrsdh Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: repair required (used), Year of construction: 2008, operating hours: 25,000 h, functionality: not functional, machine/vehicle number: 191-65, workpiece length (max.): 400 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 350 mm, overall weight: 8,700 kg, spindle speed (max.): 20,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 2008 CHIRON FZ 15KS High Speed Plus 5-axis vertical machining center with Heidenhain CNC control. Machine weight approximately 8,700 kg. Chip conveyor included. The spindle is defective and has been removed. The spindle and available related components are stored in wooden crate and are included in sale. The spindle requires repair,rebuilding. The machine is sold as-is and where-is. Inspection is available in Ankara,TURKEY. Bdsdpfx Aez Hmb Ajmroh Asking price: EUR 30.500, negotiable. EXW Ankara.

Condition: good (used), Year of construction: 2016, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66T Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66T graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66T Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66T graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in good condition. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66T Graphic CNC Control Condition: Good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bsdpfozdak Asx Amredh Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66T graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: Pjtx Eswb Uuxodn Dorc 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory! Bedpfx Aexta U Eomredh

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,822 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 4,900 W, number of axes: 4, This 4-axis Brother Speedio S700 X1 was manufactured in 2018. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 300 mm. The machine includes a table size of 1150 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the Brother Speedio S700 X1 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 400 mm • Spindle taper: 7/24 No. 30 (Big-Plus) Dual Contact / BT30 • Tool shank: MAS-BT / BBT30 • Retention knob: MAS-P30T-2 (30°) • Tool changer: 21-tool carousel, total load capacity 35 kg • Tool change time (tool-to-tool): 0.8 s • Tool balance limit: 50 g • Rapid traverse rates: X 50 m/min, Y 50 m/min, Z 56 m/min • CNC control: CNC-C00 • Machine control indicated readings (recorded : Total operation time 17,822 h; Power-on time 33,212 h • Excluded equipment: External hydraulic unit Additional equipment Bjdpsz Hmn Nefx Amrsdh • Hydraulic fixing table • Renishaw broken tool detector • Transformer / power supply unit • HAKUSAN chip conveyor • Emulsion mist separator SARA UC 1 SD

Condition: excellent (used), Year of construction: 2010, operating hours: 5,285 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 105 W, type of cooling: air, total width: 1,240 mm, total height: 1,140 mm, total length: 1,920 mm, overall weight: 580 kg, travel distance X-axis: 1,245 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 610 mm, input current: 20 A, laser wavelength: 10,600 nm, input frequency: 50 Hz, Speedy 500 in good condition, coming from a model-making workshop. Few operating hours (5285 hours). Laser source replaced in late 2018 (Synrad firestar ti100; nominal 100 W, 151 W as a new part; 2392 hours of operating time). Power supply also replaced in 2018 (Meanwell RSP-2400). Last service: 08/2026 Extensive accessories included: Laser pointer for precise alignment of the workpiece 5.0" lens 2.0" lens Pass-through – for processing longer sheets Gas kit Cutting table Vacuum table Honeycomb table / aluminum honeycomb core for vacuum table Rotary engraving attachment – for bottles, glasses, etc. Bodpfxez Eh Eas Amrjdh iCut software and camera (currently disassembled) Includes Mistral ECO 220V / 50HZ extraction system (motor relatively new). Original new price: €86,708.58

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A Bdedpsyr Utnofx Amrsh _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Trotec SpeedMarker 156Wx Industrial Laser Marking System Brand: Trotec Model: SpeedMarker 156Wx Type: Industrial Laser Marking System Application: Permanent marking, engraving and identification of industrial components Available for sale is a Trotec SpeedMarker 156Wx, a professional industrial laser marking system from Trotec Laser. The SpeedMarker series is designed for high-quality, permanent marking and identification of a wide range of industrial components and products. It is suitable for applications including product identification, serial numbers, barcodes, QR codes, logos, text, part numbers and traceability markings. Bdodpfez Hzvhex Amrsh The SpeedMarker 156Wx is particularly suited to industrial and manufacturing environments where accurate, repeatable and permanent marking is required. Typical Applications: - Industrial component marking - Serial number and part number marking - Barcode and QR code marking - Logo and branding - Product identification - Traceability marking - Metal component marking - Engineering and manufacturing applications - Tool and equipment identification - Permanent asset marking Device was removed from IMA manufacturing line that was never commissioned. Marking system is in "as new" condition. Sold as seen in images.

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW Bdjdsu N A U Ispfx Amrsh weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Bjdpfju Nfinox Amrodh Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 275 mm, operating speed: 12 mm/s, reverse speed: 190 mm/s, table length: 3,100 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 550 mm, clearance between the columns: 2,600 mm, oil tank capacity: 300 l, total length: 5,025 mm, total width: 2,150 mm, total height: 2,680 mm, overall weight: 9,086 kg, Equipment: CE marking, documentation/manual, safety light barrier, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake 2022 Ermaksan Speed-Bend PRO 3100x175 CNC press brake in very good condition. 175T x 3100mm, 6 axis, Delem DA66TX, CNC crowning, laser guards, generous tooling package included. Machine Manufacturer: Ermaksan Model: Speed Bend Pro 3100 x 175T Machine Type: 6 Axis CNC Pressbrake Capacity: 3100 x 175T Bdodsz Dn Huepfx Amrjh Year: 2022 Control: Delem DA66TX Condition: Very Good Description Ermaksan Speed-Bend Pro 6 Axis CNC Hydraulic Press Brake with Delem DA66TX Control. Available now, this 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake is a high-quality, modern hydraulic press brake in very good condition. This is a 6 axis machine with Y1, Y2, X, R, Z1 and Z2 axes, fitted with a Delem DA66TX CNC control, pneumatic top tool clamping, CNC crowning, laser guards, wanderer type foot pedal, and supplied with generous selection of top and bottom tooling. Ideal for sheet metal fabrication, precision bending, stainless steel work, mild steel fabrication, aluminium bending, agricultural fabrication, general engineering and production workshops. Key Features 2022 Ermaksan Speed-Bend PRO 3100x175 175 tonne bending capacity 3100mm bending length 6 axis CNC press brake Y1, Y2, X, R, Z1 & Z2 axes Delem DA66TX CNC control Pneumatic top tool clamping Package of Top and bottom tooling included CNC / motorised crowning Laser safety guards Wanderer type foot pedal Very good condition Excellent machine for fabrication and production bending work Capacity & Main Machine Data Manufacturer: Ermaksan Model: Speed-Bend PRO 3100x175 Year: 2022 Machine Type: CNC hydraulic press brake Bending Length: 3100mm Bending Force: 175 tonnes Distance Between Columns: 2600mm Axes: Y1, Y2, X, R, Z1, Z2 Crowning: Motorised / CNC crowning Backgauge Finger Blocks: 2 Speeds & Axis Travel Y Rapid Speed: 180mm/s Y Working Speed: 12mm/s Y Return Speed: 190mm/s X Axis Travel: 800mm X Axis Speed: 500mm/s R Axis Travel: 250mm R Axis Speed: 350mm/s Z1 / Z2 Axis Travel Speed: 1000mm/s Stroke, Daylight & Frame Stroke: 275mm Daylight: 550mm Throat Depth: 410mm Table Height: 900mm Table Width: 90mm Power, Size & Weight Oil Capacity: 300 litres Motor Power: 15kW Approx. Length: 5025mm Approx. Height: 2680mm Approx. Width: 2150mm Approx. Weight: 9086kg Delem DA66TX CNC Control Control Features Include 2D graphical touch-screen programming High-resolution colour TFT display Automatic bend sequence calculation Collision detection 3D machine setup with multiple tool stations USB / peripheral interfacing Product and tool memory Profile-TL offline software support User-friendly Delem touch navigation Delem’s DA-66T platform is listed by Delem as a 2D graphical press brake control with automatic bend sequence calculation, collision detection, full 3D machine setup, USB interfacing, 17" high-resolution colour TFT display and Profile-TL offline software support. Included Equipment Pneumatic top tool clamping Lots of Top tooling Lots of Bottom tooling CNC crowning Laser guards Wanderer type foot pedal 6 axis CNC backgauge system Delem DA66TX control Typical Applications Sheet metal fabrication CNC press brake bending Mild steel bending Stainless steel bending Aluminium bending Box and pan type components Architectural metalwork Agricultural fabrication General engineering workshops Production bending work

Condition: used, Year of construction: 1980, Technical details: Bdjdsu N A Uuepfx Amroh pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, pressing force: 160 t, overall weight: 10,500 kg, punching force: 160 t, height adjustment type: electric, Eccentric Press ERFURT PEE(II) 160 for Sale For sale is an Erfurt PEE(II) 160 eccentric press in good condition, ready for immediate use. This is a robust and reliable industrial machine, ideally suited for various pressing, forming, and sheet metal processing tasks. Erfurt machines are renowned for their durable construction, solid design, and dependable performance. Therefore, this model is an excellent choice for metalworking companies, workshops, manufacturing businesses, or fabrication shops seeking a proven and high-performance press. Technical specifications: - Type: Erfurt PEE(II) 160 - Design: Eccentric press - Condition: Good - Operational status: Ready for immediate use This machine impresses with its heavy-duty build and reliable functionality in industrial applications. It is perfectly suited for daily use in production and can be put into operation immediately after purchase. Bedjyvzzzjpfx Amrodh If interested, further information, technical details, and additional photos can be provided upon request.

Condition: excellent (used), Year of construction: 1998, operating hours: 61,000,000 h, functionality: fully functional, machine/vehicle number: 201810, color channels: 2, paper weight (min.): 50 g/m², paper weight (max.): 280 g/m², paper width (min.): 520 mm, total length: 290 mm, total width: 190 mm, total height: 170 mm, space requirement width: 300 mm, space requirement height: 220 mm, counter reading (black): 61,000,000, counter reading (color): 61,000,000, year of last overhaul: 2025, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, Heidelberg Speedmaster SM 52-2-P offset printing press for sale, manufactured in 1998, currently in daily production and available for inspection and live demonstration. Configuration * 2 printing units + perfecting device (1/1 or 2/0) * Maximum sheet size: 370 × 520 mm * Total impressions: 60,956,393 * AutoPlate semi-automatic plate changing system * Heidelberg Alcolor dampening system * Technotrans refrigeration unit for the dampening solution * Continuous feeder * Electronic side lays * CP Tronic control console * Automatic ink key presetting from the CP Tronic console * FullWash automatic washing system for the plate cylinders and ink rollers (blanket washing unit not installed) * Replaced cylinders Technical Condition * The press is currently in daily production and can be inspected while running. * Original Heidelberg ink and dampening rollers were replaced approximately 2 years ago (invoice available). * The machine runs perfectly and produces commercial print jobs every day. * Sold complete with a Plate Punch & Bender. Automatic Washing Systems The press is equipped with automatic washing systems for: * Impression and transfer cylinders; * Ink rollers. The blanket washing units are not installed. Documentation * Original purchase invoice available. * Original Heidelberg manuals and tools. * Original electrical diagrams. Bdsdszrr U Uepfx Amrsh Terms of Sale * VAT invoice will be issued. * Dismantling, loading and transportation are the buyer’s responsibility. Ideal for Printing * Flyers * Brochures * Business cards * Folders * Forms * Labels * Commercial print jobs * High-quality promotional materials This press is an excellent choice for print shops looking for a reliable Heidelberg offset press with low operating and maintenance costs. Price €17,500 (VAT included).

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 4,000 t, stroke length: 180 mm, throat depth: 500 mm, overall weight: 28,000 kg, controller model: Siemens S7-300, The machine underwent a major overhaul in 2007! The following modifications were carried out on the single-column eccentric press PEE 400: Conversion of the press drive to an adjustable drive with 15-45 strokes of the press ram Conversion of the clutch and brake to a pneumatically actuated Ortlinghaus clutch-brake combination Adjustment of the pinion shaft, flywheel, and bearing cover to the pneumatically actuated clutch-brake combinations Replacement of the rolling bearings for the pinion shaft and flywheel bearing Replacement of all sealing elements and wear parts for the drive Replacement of the seals for the compensator cylinder Replacement of the V-belts for the flywheel drive Replacement of the entire electrical control system Installation of a stroke adjustment mechanism Modification of the safety device Mounting of a tie rod to reduce frame deflection under press force Replacement of the worm gear for ram adjustment, pressure spindle, spindle nut, and pressure ring Refurbishment of the ram guide rails Replacement of the die plate and its support Hydraulics Pneumatics Lubrication Hydraulic pull-down cushion in the press table Tool mounting arms for attaching the press tool Bjdpfx Amjzmfnqjrsdh Tool lever strips in the table TECHNICAL DETAILS Pressing force: 4,000 kN Adjustable stroke: 30–180 mm Adjustable stroke rate per minute (continuous operation): 15–45 /min Ram adjustment: 150 mm Overhang: 500 mm Ram area (width × depth): 1,200 × 800 mm Table area (width × depth): 1,600 × 1,000 mm Maximum distance between table and ram area: 625 mm MACHINE DETAILS Control: Siemens S7-300 Motor power: 55 kW Motor speed: 1,500 rpm Hydraulic pull-down cushion Piston diameter: 110 mm Piston rod diameter: 90 mm Effective piston area: 95 cm² Pull-down cushion diameter: 230 mm Adjustable counterforce: 10–250 kN Usable pull-down cushion stroke: 90 mm Speed of the pull-down cushion during extension: max. 65 mm/s Hydraulic system Flow rate of the pull-down cushion pump: 29 l/min Drive power of the main pump: 7.5 kW Oil capacity in the tank: 250 l Flow rate of the circulation pump: 65 l/min Drive power of the circulation pump: 1.5 kW Operating pressure for clutch and brake: 5 bar Operating pressure for ram weight compensation: 5 bar Total machine weight: 28,000 kg

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 Bjdpfx Amjxuhw Dersdh 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device Bsdpfx Asu Nfklemrjdh *

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: S36-1969, laser power: 60 W, type of cooling: air, total width: 830 mm, total height: 1,055 mm, total length: 1,221 mm, overall weight: 300 kg, We present the Trotec Speedy 360 CO2 laser with a power output of 60 watts, manufactured in October 2020. Equipped with Sonar autofocus technology, this laser is ready for immediate use and is fully functional. Bdodpfxjzzkg Ie Amroh The scope of delivery includes: - Trotec Speedy 360 60-watt air-cooled laser and Atmos Duo plus HEPA 230V - Laptop including Win10 and CorelDraw - Aluminum grid cutting table - with pump for air supply - Rulers in mm - with masking tape - Extraction nozzle 75mm - Connection cable Technical data: - Working area: 813 mm x 508 mm - Dimensions: 1221 x 830 x 1055 mm - Laser power: CO2 60 watts - Laser source: CO2 laser, digitally controlled, air-cooled - Air assist: Improves cutting results by blowing away heat and gases - Movable starting point: Enables precise selection of the starting position for laser engraving/laser cutting - Resolution: User-selectable from 100 to 1000 dpi - Connection: USB interface

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, resulting in very few spindle operating hours! - Pallet dimensions: approximately 320 x 320 mm Bodpey Tvcujfx Amredh - The pallets are clamped onto the rotary table - Tool holder: HSK-E 40 - For further technical data, see the images - With technical documentation - With HSK-E 40 tool holders and three pallets Attention: The item must be picked up between July 21st and July 23rd, 2026, on a date to be confirmed. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: used, Uienpelmachine voor de professionele groenteverwerking Deze USM-100 is een uienpelmachine van Sormac uit Venlo, gebouwd in 2006 en uitgevoerd in roestvrij staal. De machine is voorzien van een invoertrechter, een transportketting met meeneemvakken en een aandrijving van 5 kW op 230/400 V, 50 Hz. Onderin de kap zit de roterende pelkop met draaiende messen die de uien koppen, staarten en rondom insnijden, waarna lucht wordt gebruikt om de schil te verwijderen. De machine is geschikt voor een capaciteit tot 100 uien per minuut. De set is compleet met inspectie- en afvoerband met opvangbak, zoals te zien op de foto’s. More photos and full specifications: / Bedpfx Amsz Hqtvoredh