Used Oxysystems Os-40-Nx for sale (25,023)

Year of construction: 2025, condition: new, New OS-40-NX Nitrogen PSA Generator with the delivery for 43.9 Nm³/h at 6 bar (g) and a purity of 99.9 % (Other interpretations on request) Fedpfx Aew Dqdbok Uopl Requirements for the compressed air supplied on site: Volume flow 2.5 m³/min Pressure >8 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 43.9 Nm³/h Nitrogen pressure: 6 bar (g) Purity: 99.9% Equipment: Nitrogen Generator OS-40-NX Compressed Air - Pressure Dew Point Sensor Compressed Air - Pressure Sensor Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2025, condition: new, New OS-60-NX Nitrogen PSA Generator with the delivery for 65.0 Nm³/h at 7 bar (g) and a purity of 99.9 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 3.7 m³/min Pressure 9 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 65.0 Nm³/h Nitrogen pressure: 7 bar (g) Purity: 99.9% Equipment: Nitrogen Generator OS-60-NX Compressed Air - Pressure Dew Point Sensor Compressed Air - Pressure Sensor Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls Fsdpfxjvyq S Ss Ak Uspl -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2026, condition: new, New OS-225-NX Nitrogen PSA Generator with the delivery for 505.2 Nm³/h at 5 bar (g) and a purity of 98.0 % (Other interpretations on request) Time of delivery 8 to 10 weeks Requirements for the compressed air supplied on site: Volume flow 20.21 m³/min Pressure 7 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 505.2 Nm³/h Nitrogen pressure: 5 bar (g) Purity: 98.0% Equipment: Nitrogen Generator OS-225-NX Compressed Air - Pressure Dew Point Sensor Air-Purity-Control Fpedpfjwa I Ebex Ak Ujl Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: new, Year of construction: 2023, operating hours: 150 h, Used Kaeser Booster Compressor N253-G (9/40) without start control / star-delta connection Year of Manufacture: 2023 Operating Hours: 150 hrs Equipment - Compressed air aftercooler design: finned-tube type - Oil supply: via oil pump - Oil pressure monitoring - Oil pressure and discharge temperature indication Technical Data Inlet pressure: 9 bar(g) Fpjdpfszaaqzsx Ak Usl Final pressure: 40 bar(g) Capacity at 40 bar: 1.74 m³/min Minimum ambient temperature: 2 °C Maximum ambient temperature: 40 °C Compressor block speed: 1,135 rpm Number of cylinders: 2 Drive motor rated power: 11.0 kW Motor efficiency class: IE3 Motor protection class: IP55 Electrical supply: 400 V / 3 Ph / 50 Hz Sound pressure level: 76 dB(A) Compressed air inlet connection: G 3/4" Compressed air outlet connection: G 1/2" Visit our always have a large selection of new and used compressors in stock!

Condition: used, axle configuration: 3 axles, first registration: 12/2011, total length: 11,300 mm, total width: 2,500 mm, total height: 1,350 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2011, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 5280 kg, Gross vehicle weight: 12000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Full air, EBS, Extendable chassis: Rear, MULTI // BPW LIFT AXLE // DISC BRAKES // DE TÜV 05-2027 = Further Information = General Information Cab: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Fodezni Uwspfx Ak Uspl Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 4 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 7 mm Axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 8 mm Weights Unladen weight: 5,280 kg Payload: 6,720 kg GVW: 12,000 kg Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 05.2027 Condition Overall condition: very poor Technical condition: very poor Optical condition: very poor Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 1992, functionality: fully functional, power: 330 kW (448.67 HP), control type: PLC-controlled, actuation type: hydraulic, For sale is a used Quattro Spaner bandsaw, Super 40 model, manufactured in 1992, consisting of: - Spaner - Centering unit - 4-bandsaw system Super 40 This system is particularly suitable for the efficient cutting of light to medium-strength round timber and enables precise and efficient processing in a compact design. Technical data: Max. round timber diameter: 58 cm → Debarking up to 42 cm Min. round timber diameter: 13 cm → Debarking up to 8 cm Feed rate: up to approx. 59 m/min → Reduced to approx. 20 m/min for large cross-sections Daily output: approx. 250–300 cubic meters/day → Depending on round timber diameter and cutting Condition and previous use: The system was in operation at a sawmill with an annual production of approximately 50,000 cubic meters in a single-shift operation until summer 2025. It was regularly maintained until it was taken out of service and was fully functional. However, due to its age and for reliable long-term operation, a complete overhaul is necessary. An inspection of the system for sale is possible by arrangement. An identical Quattro system, which has already been completely overhauled, can be inspected on-site during ongoing production. This allows interested parties to gain a clear picture of the system's performance and potential applications after an overhaul (see photo). Price on request. Fodpfjzvx Shsx Ak Uopl We will gladly send further technical information as well as photos and videos upon request. Inspection is possible after prior appointment.

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract Fpodpfx Ast Hw S Uok Usl

Condition: new, Year of construction: 2026, CORMAK OS-4000S Welding Fume Extractor The CORMAK OS-4000S is an industrial welding fume extractor designed for effective removal of welding fumes, dust, and fine contaminants generated during welding and related operations. The OS4000S features a new, lower-profile housing. The unit operates locally at the workstation, capturing contaminants before they spread throughout the workshop or production hall. This significantly improves working comfort, visibility in the welding area, and helps maintain workplace health and safety standards. Specifications Parameter Value Model OS4000S Power Supply 400 V Power 4.0 kW Airflow Capacity 3000–4000 m³/h Operating Pressure 3050–2600 Pa Filtration Efficiency 99.00% Number of Filter Cartridges 4 pcs Filter Specification Ø325 × 600 mm Filter Material Polyester Filter Cleaning Method Pneumatic, pulse cleaning Dust Container Capacity 50 l Noise Level ≤ 78 dB(A) Dimensions 900 × 900 × 1950 mm Why Choose the OS-4000S? High extraction performance – effective suction of fumes and dust near the welding arc. Large-surface cartridge filtration system – highly efficient separation of fine particles. Automatic pneumatic filter cleaning – stable operation with fewer maintenance interruptions. Dust collection container – fast and convenient emptying without mess. Easy operation – user-friendly controls and quick access to consumable components. Effective Filtration and Consistent Suction Power The OS-4000S uses a multi-stage filtration system based on cartridge filters. This allows the unit to efficiently capture fine dust and welding fume particles. Additionally, the pneumatic pulse cleaning system shakes dust off the filter surfaces, which: maintains constant suction efficiency, extends filter service life, reduces performance loss during intensive operation. Comfort and Safety at the Workstation Fsdpfx Akey Sgc Aj Ujpl Extracting contaminants directly at the source provides immediate benefits: less smoke in the operator’s working zone, improved weld visibility and more stable working conditions, cleaner workshop environment and reduced dust accumulation on machines and installations. Applications The CORMAK OS-4000S is suitable for: MIG/MAG, TIG, and MMA welding, metalworking and maintenance operations in production facilities, grinding and deburring near the workstation, light cutting and processing operations that generate dust and fumes.

Condition: used, Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 5x spindle tools -Adjustment: SK50 -different shaft sizes: 22/25/30/40 mm -Price: complete -Weight: 19.2 kg Fpedpfoc U T Adox Ak Uol

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Fpsdpozlkgcefx Ak Usl Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018w25-000298, overall weight: 3 kg, total length: 180 mm, volume flow: 2.5 m³/h, operating pressure: 10 bar, final pressure: 10 bar, power: 6 kW (8.16 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, Unused stock item: KSB Calio S 25-40. Highly efficient heating and drinking water pump for energy-saving use in heating and drinking water systems. Its compact design and high efficiency ensure a durable and cost-effective solution. Type: Calio S 25-40 Machine number: 29134756 Product number: 2018w25.000298 Nominal diameter: DN 25 Maximum head: 4.9 m Voltage: 230 V Efficient, variable-speed circulation pump Integrated control system for optimized performance Fjdpfev Tm Hfex Ak Ujpl

Condition: new, Barmag A-406-0956 Beltro-Drive BDV433-OS-19, serial number as shown in the photo, unused, 100% functional, scope of delivery as per photos. Fsdpfx Asi D T Etek Ujpl

Condition: used, mileage: 29,985 km, power: 140 kW (190.35 HP), fuel type: gasoline, gearing type: automatic, first registration: 01/2024, next inspection (TÜV): 01/2027, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, second-hand vehicle warranty, * German vehicle, second owner, very good condition * Audi extended warranty valid until 01/2029 Fsdpfozhhm Esx Ak Uepl * Auxiliary heater * Adaptive suspension with drive select * Swivel tow hitch * Interior S line, S line business * Comfort package * Matrix LED headlights * Summer tires 20 inches + winter tires 19 inches, approx. 80% tread * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: * Special equipment: Assistance package, Audi connect (Remote / Control), Audi Drive Select + suspension with damper control (Magnetic Ride), Exterior mirrors, electrically adjustable, heated and folding, with automatic anti-glare and curb-side functions, Exterior mirrors, black, Business package, Interior: Aluminum trim, Interior: Decorative trim, piano lacquer, black, Interior mirror with automatic anti-glare function, Interior package S line, Isofix mounting for child seat on front passenger seat, Comfort climate control, 3-zone, Comfort package, Contour / ambient lighting package (plus), Headrests, adjustable, Lumbar support, front, electrically adjustable, Light alloy wheels 7x19 (5-arm dynamic design, for winter tires), Light alloy wheels 8.5x20 (5-double-spoke design, Rotor, black matt, polished), Exterior package, black plus, Rear view camera, Front seat, left, electrically adjustable, Special paint, Daytonagrau pearl effect, Sound system DSP / Audi sound system, Auxiliary heater, Rear window tinted (privacy glass) Additional features: Front passenger airbag can be deactivated, Airbag, driver/front passenger, LED turn signals integrated in exterior mirrors, Roof rails, black, Door sill trims with aluminum inlay and lettering, illuminated, Driver assistance system: Brake assistant (Audi pre sense front), Driver assistance system: Occupant protection system (Audi pre sense basic), Driver assistance system: Emergency assistant with automatic emergency call, Driver assistance system: Lane change and lane keeping assistant (Side Assist and Lane Assist), Windshield, acoustic glass, Floor mats, velour, Body: 4-door, Child lock, electrically operated, Head airbag system (Sideguard), Loading edge protection (stainless steel), Engine 2.0 L - 140 kW 16V TFSI, Multi-Media-Interface MMI Basic Plus / MMI Radio Plus, Otto particulate filter (OPF), Parking brake, electro-mechanical, Radio reception, digital (DAB), Wheelbase 2680 mm, Tire repair kit, Low emission according to emission standard Euro 6d, Windshield washer nozzles, heated, Side airbags, front, Start/stop system, Complete paint finish

Year of construction: 2000, condition: used, Year of manufacture: Feb 2000 New: No Fedpfxorllzks Ak Uspl No guarantee. Please contact us if you can't find what you are looking for

Condition: excellent (used), Year of construction: 2016, operating hours: 1,774 h, functionality: fully functional, working width: 510 mm, warranty duration: 12 months, tank capacity: 40 l, total height: 1,145 mm, total width: 620 mm, total length: 1,249 mm, water tank capacity: 40 l, We have for sale a Karcher B 40 W Bp Dose walk-behind scrubber dryer. Condition: Very good Year of manufacture: 2016 The machine is in excellent condition, both visually and technically. It has undergone a thorough and detailed refurbishment, ensuring it is fully operational and ready for immediate use. All of our machines are presented in genuine photos—what you see is exactly what you get. A 12-month WARRANTY is provided on all equipment purchased from us. Equipment included: - New batteries - New disc brushes - New squeegee rubbers Fpjdpfx Akew Ifbnj Ujl - Charger Technical specifications: - Power supply (V): 24 (battery powered) - Working width, brushes (mm): 550 - Suction width (mm): 850 - Theoretical area performance (m²/h): 3300 - Practical area performance (m²/h): 1980 - Tank capacity, clean/dirty water (l): 40 / 40 - Brush contact pressure (g/cm²): 140 – 160 - Brush rotation speed (rpm): 1200 - Rated power (W): max. 1300 - Drive motor (W): 130 - Dimensions (L x W x H) (mm): 1249 x 620 x 1145

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload The transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed support legs, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure placed on the outside of the EBS module Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Fpsdpfji Riwmox Ak Ujl Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau, 10 years warranty against rust-through Support legs black coated without pallet box paint Note: Archive images!

Condition: new, MIG/MAG – Pulsed MIG/MAG – TIG DC HF – Electrode Single-phase power supply 1x230V greenWave® inverter technology Integrated wire feed unit 9 innovative welding processes from Böhler Welding Fpjdpfx Aksyrfd Ro Uel 3.5" color LCD control panel 220A at 35% (40 °C) 23.7 kg

Year of construction: 2022, condition: ready for operation (used), I am offering a Shimadzu GC MS, TQ8040 NX, Nexis GC-2030 gas chromatograph in perfect condition. Gas chromatography/triple quadrupole mass spectrometry (GC/MS) Due to the sensitivity of the device, on-site disassembly and personal pickup are required. Please check out my other listings, where you will find many more devices from a closed laboratory. Fodpfx Akjy Tmlyo Uepl

Condition: good (used), Various standard and powered tool holders in different designs for VDI 20, 30, 40, 50, and 60. Fpsdpsbql T Esfx Ak Ujl Please specify the VDI size you require when submitting your inquiry! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, NEW & unused Overview / list of available types (see pictures) multiple units available Fpjdpep T N Tqofx Ak Usl Price: per piece

Condition: new, Layout: Crusher Attachment suited for: Construction machines Selling price: € 1.950, US$ 2.053 Galen hydraulic breakers are user-friendly and tailored for all excavator sizes and models. Prioritizing breaking capability, Galen Breakers' high efficiency ensures rapid, safe, and productive operations. They are fuel-efficient due to their low flow/pressure design. Available in both small and medium variants, we offer 8 models weighing from 125-2750 kg, compatible with excavators from 1.5-30 tonnes. Fodpfx Aepl Ef Njk Ujpl For detailed information and price inquiry please contact us

Condition: ready for operation (used), Bosch PU 401 servo-positioning unit. Used, in good condition, 100% functional. Fpsdpji D Ubzjfx Ak Uel

Condition: ready for operation (used), Bosch SD-A4.140.020-01.000, brushless, permanent magnet synchronous servomotor, serial no. 444000207, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Fpodpfx Akoi D E R Ro Ujl

Condition: ready for operation (used), Mitsubishi HA23NC-S servo motor, serial number: 14004 + OSA253S2 encoder, serial number: J4AVU426G7V, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Fpodpfsi D I Nuex Ak Uol

Condition: ready for operation (used), Mitsubishi HA33C-S synchronous servo motor, serial number: M54644060 + Tamagawa OSE 12.5KN-6-12-0 rotary encoder, serial number: 7945T, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Fedpfx Akoi D I N Uj Ujpl