Used Notching Machine With Variable Angle for sale (67,692)

Condition: new, messurements (LxWxH): 1,10 x 1,15 x 1.40weight approx.: 1,150total power requirements: 4sheet thickness: 6 mm Duodpfx Aod Ab Idsiwst Details: - Hydraulic drive - Blade length: 200 mm - Adjustable angle: 60° - 140°, 6 mm - Adjustable angle: 30° - 59°, 4 mm

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition Dusdpfx Ajmck Ryoiwet

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop Dujdpshyuglefx Aiwst

Condition: good (used), Year of construction: 2007, Blade length: 200 mm For plate thickness: 6 mm Hydraulically driven Dedpfxoyuyals Aiwjut Variable angle Machine weight: 1,200 kg

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Dedpfx Asrzfh Hsiweut Very good condition

Condition: new, messurements (LxWxH): 0,80 x 0,85 x 1,20weight approx.: 0,610total power requirements: 4sheet thickness: 6Details: Hydraulic drive, 6 mm at 90° (fixed) Blade length: 200 mm Notching angle: 90° Dsdsd Ab Icspfx Aiwjut

Condition: used, Manual Lever Corner Notcher BERNARDO Type AK100 Manual Notching Machine Serial No. A17010320 Year of manufacture 2017 Blade length: 100 mm Material thickness at 40 kg/mm²: max. 3 mm Notching angle: 90° Stroke: 28 mm Table size: 380 x 280 mm - Adjustable stops - Lever arm length: 650 mm, 500 mm bolt-on extension missing Dimensions (L x W x H): 380 x 380 x 1000 mm (with 650 mm lever) Net weight: 90 kg Good condition Dodjyhq Aqepfx Aiwsut

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. Dujdsxdmgvspfx Aiwst It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Dedsuzv Tzopfx Aiwjut Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Duedjwz Ukyopfx Aiwet Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: used, Year of construction: 1987, plate thickness 4 mm blade length 150 mm cutting angle 30-120 ° Table dimensions 1000x650 mm Dsdsyv Ntxspfx Aiwjut

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² 4 mm at 600 N/mm² Dsdpjy Rf Ubsfx Aiwsut Stepless angle adjustment 30 - 120° Drive power approx. 4 kW

Condition: used, Year of construction: 1987, plate thickness 3 mm angle adjustable from - to 30 - 120 Grad table height 900 mm weight ca. 800 kg Cutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel; cutting angle continuously adjustable from 30° to 120°; pneumatic clamping for angle adjustment (Boschert system); machine is in good condition Djdpfx Aisy Ihanewjut

Condition: ready for operation (used), Year of construction: 1982, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 Hub/min angle adjustable from - to 30 - 120 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm * Machine with 1x new set of notching knives (!!) * installed in 2026 * approx. acquisition costs 1.000 Euro Equipment: - electro-hydraulic notching machine, with angle adjustment * Angle adjustment via hand wheels - Front control panel - Plexiglas protection for better transparency - Hardened blades also for cutting stainless steel - Planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x cutting stops Dedpfx Aoxaaiijiweut * with movable and replaceable stop bars - lateral cut material ejection - Freely movable foot switch - operating instructions

Condition: used, Year of construction: 2012, gebraucht Dusdpfx Ajynm Ddoiwjt 2012 9690F prompt, Zwischenverkauf v China 690 € 1 100 mm 3 mm 90 ° 90 kg Beidseitig verstellbare Anschläge Fingerschutz Ausrüstung gemäß CE Vorschriften

Condition: good (used), Year of construction: 2000, machine/vehicle number: M 100-34 E3-D, Offer 24371 Technical data: - Machine for the production of closed cold-formed corners - Material thicknesses 0.8 to 2.5 mm Duodpfou Rartjx Aiwet - max. achievable shelf height see table - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg

Condition: new, Year of construction: 2025, Case Maker with Robotic Hand – High Efficiency Book Cover Machine We are offering a high-quality case making machine designed for the production of book covers, notebooks, and similar hardcover products. Equipped with a robotic hand, this machine ensures precision, consistency, and efficient handling during the production process. It is suitable for working with a wide range of materials, including gray board, MDF, wooden boards, mirror board, as well as various cover materials such as art paper, specialty metallic papers (gold/silver), fabric, and velvet. Ideal for print shops, binderies, and packaging manufacturers looking to improve productivity and product quality. Working speed: 15-28 pcs/min Max hardcover size: 460x300mm Min Hardcover size: 55x60mm Dsdpfsy Dqx Sox Aiwout Case Thickness range: 1-12mm Cover Thickness range: 100 -250 g/m2 Case materials range: Gray board, wooden board. mdf, mirror board Cover materials range: Art paper, Silver/gold paper, Fabric, Velvet Machine dimension: 1150x1500x1700mm Machine weight: 650kg

Condition: good (used), Year of construction: 2012, machine/vehicle number: 753, Offer 26125 Technical Data: - Cutting length up to 150 mm - Cutting thickness – at 400 N/mm² strength: 4 mm Dusdpfey Dqmvjx Aiwet – at 700 N/mm² strength: 3 mm - Cutting angle steplessly adjustable: 30° – 120° - Pneumatic clamping of the cutting angle adjustment - Stroke: 22 mm - Strokes per minute: 60 - Table surface with T-slots and depth stops - Table height: 900 mm - Drive: 400 V / 3 kW - Electric foot pedal - Space requirement approx.: W 1000 x H 1150 x D 1400 mm - Weight approx.: 850 kg

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable Duodpjg Ip Efjfx Aiwet

Condition: good (used), Year of construction: 1990, blade length 200 x 200 mm max. sheet thickness: Normal steel 4 mm VA 3 mm variable notching angle 30 - 135 drive power 4 kW dimensions L x W x H 1700 x 1000 x 1500 mm Weight 940 kg Accessories / special features: - Cutting depth limitation via potentiometer with digital display Dusdsdut Skjpfx Aiwot - Variable angle of deflection 30 - 135°. - Clean cuts, even beyond the blade length without any start-up - Hydraulic clamping of the knives for angle adjustment - Large work table with scale and T-slots - Electric foot switch incl. 1 set of new upper knives 30 - 135°, newly mounted and adjusted Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Boschert Notching Machine Type LB14 Station 1 Fixed angle 90° Cutting length 225x225 mm Adjustable cutting length Cutting capacity 4 mm St40/ 3 mm V2A Station 2 Indentation cutting 100x25 mm Adjustable cutting length Used machine in very good condition Dodpfx Aewfymnjiweut Refurbished Built in 2000

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping Dusdpfx Aijyz S Trswjt - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 17100 € 328.32 € Dujdpfowiq Tgjx Aiwot 200 mm 4 - 6 mm 2 - 3 mm 30 1/min 30 - 140 ° 4 kW 900 mm 1150 mm 1240 mm 1150 kg Hydraulic drive Variable cutting angle 30 - 140° Max. thickness (420 N/mm²) : 6 mm (at 60°), 4 mm (at 140°) Max. thickness (600 N/mm²) : 3 mm (at 60°), 3 mm (at 140°) Automatic adjustment of blade gap 4 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to "CE" regulations User manual in English or German

Condition: good (used), functionality: fully functional, Station 1: Angle adjustment from 30° - 120° Cutting length 150 mm Djdpfx Aijyzca Njwjut Station 2: Notching 100 x 20 mm

Condition: good (used), functionality: fully functional, Year of construction: 1995, Used Boschert notching machine Type: LB 12 K 4 Capacity: 120 x 120 x 4 mm Duedeywvwyspfx Aiwet Fixed angle: 90 degrees Year of manufacture: 1995