Used Nicholson A5/35“ for sale (10,743)

Condition: used, Nicholson A5/35” immediately available. Log diameter: 8-90 cm. Pedpfxoxpvxxo Aahopu

Year of construction: 2007, condition: good (used), A well-maintained Nicholson A6/35” is being offered. Ppjdpfxjy Rhyme Aahsu

Year of construction: 1900, condition: used, Used A2/35“ machine. Minimum diameter 80 mm, maximum 900 mm. Minimum log length 180 cm. The price refers to the machine in its current condition. Feed chains and sprockets can be replaced or supplied by us at an additional cost. Podpewqmyfsfx Aahopu

Condition: good (used), Year of construction: 2004, A well-maintained Nicholson debarker is being offered for sale. The 4-arm rotor was replaced with a 5-arm rotor in 2010. The machine has already been dismantled. Ppjdpfx Aew T U T Deahou

Condition: new, Year of construction: 2021, For sale is a new Nicholson A6/35" 5-arm machine with roller drive. The machine is still in its original packaging. Assembly and commissioning can be carried out by us. Pedpfx Aaowt T Unjhopu

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 812 - 5547/V.01.87.110, overall weight: 19,190 kg, For sale is a well-maintained Nicholson debarking plant A 5 B for log diameters up to 56 cm. We used the machine in our small-diameter sawmill (maximum diameter 25 cm). It ran without issues until recently. The knife cylinders were replaced shortly ago and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast unit. Nicholson debarkers are straightforward to operate! - Minimum length: 200 cm Pjdpfow D Hy Sjx Aahepu - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm - Weight: 19,190 kg - Machine dimensions: 470 x 251 x 335 cm incl. rotor - Feed speed up to 114 m/min (currently set to 95 m/min)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, overall weight: 30,000 kg, The machine is currently still in operation and can be inspected at any time. Location – Zingsheim. A 5, 27-inch up to 680 mm diameter. Feed up to max. 90 m/min. Weight approx. 30 tons. Shortest wood: 2.4 m. Also well-suited for long timber. Some components should be serviced or repaired upon reinstallation, e.g. valves, swing arm bearings, etc. The rotor bearing is in good condition. The rotor has been replaced. Ppsdpfjx E Tb Sjx Aahsu

Condition: used, Year of construction: 1996, Manufacturer : Marchesini Model: MS 235 / AS 237 / BA 50 Year : 1996 Type : 4-seal pouch packaging line for powders. 1. Bagging machine Vertical automatic machine with intermittent movement for filling and sealing bags, for medium and high speed production lines, for powders. Volumetric shaving filler Ppsdpfezg I Ugox Aahou Mechanical speed: 100 strokes/min Range of formats : max reel outer diameter: 400 mm (800 mm with reel) max reel width: 800 mm (820 mm with waste) bag length: 60 to 120 mm Reel support trolley Hopper handling trolley Weight: 2100 kg 2. sachet counting unit 3. Cartoning machine Capacity : 70 cartons / minute Dimension A = 40 - 145 mm Size B = 20 - 80 mm Size H = 70 - 190 mm A+B = 190 mm Weight: 900 kg

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module SN EA5615355 the article was checked and tested! ,used, normal traces of use, 100% functional, scope of delivery according to photos Ppedsnkqywepfx Aaheu

Condition: ready for operation (used), Mitsubishi / Mazak FX 784B BN624A535H01 circuit board, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ppedsi Eb Hxepfx Aahju

Condition: ready for operation (used), Siemens 6FC5357-0BB14-0AA0 NCU SN: A5E00272671, used, in good condition, 100% functional, delivery scope as per photos Ppodpoy Nr Hbsfx Aahsu

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Voltage 230/ 400V 50Hz 5.8/3.8A IP44 power 2.1 KW Air flow max 3.704 m³/h Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Pedpovu Hrkjfx Aahspu Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights inlet (height x width) 350 x 600 mm outlet (height x width) 350 x 600 mm Weight 42 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: Psdpfxoxc N Rhj Aahepu I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Ppodsxk T Igspfx Aahou

Condition: used, Fire escape / exterior staircase / emergency staircase, galvanized steel, approx. 35 m Used fire escape / exterior staircase / emergency staircase made of galvanized steel for industrial or warehouse buildings. Manufacturer: Unknown Type: Fire escape / exterior staircase / emergency staircase Material: Galvanized steel Design: Multi-story Construction: Steel frame with grating steps Handrail: Steel handrail Height: 35 m Depth: approx. 3.40 m Width: approx. 6.20 m Condition: Used Further dimensions available upon request. Location: Pforzheim Pjdpfx Aajy Tyx Tshepu

Condition: used, The machine is in good working order and ready for use. Details are shown in the picture. Podpfx Aoy Ua Tysahopu Please check out my other listings.

Condition: new, power: 257 kW (349.42 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 5,550 mm, emission class: euro6, color: yellow, suspension: air, brakes: retarder, Year of construction: 2026, fuel: diesel, Equipment: ABS, air conditioning, central locking, crane, cruise control, hydraulics, navigation system, onboard computer, trailer coupling, Images are for illustration purposes only. Vehicle will be completed for IFBA 2026 in Kassel. Scania P350 B4x2LB with high-quality Miles 4021 sliding flatbed and MKG HMK283SHP Ta5 loading crane. Vehicle data: Scania P350 B4x2LB Wheelbase: 5,550 mm Traffic yellow DC09 140 engine 350 HP / 257 kW Euro 6 SCR Full air suspension Extra low chassis LED headlights Automatic climate control Reversing camera Ball head trailer coupling Premium 7" display USB port CB radio pre-installation OBU pre-installation Disc brakes EBS ESP Hill Hold APS pneumatic Front axle: 8,500 kg Rear axle: 11,500 kg Miles 4021 sliding flatbed: Hot-dip galvanized sliding platform Ppodpfx Aastu Incehju Dimensions: 6,500 x 2,520 mm Technical load capacity: 5,000 kg Hammer cable winch 5 t Ball head coupling on the winch 12-channel radio remote control for platform and winch Work lights on gantry and rear Strobe lights on gantry Stainless steel toolboxes Hydraulic compartment Wheel lift 3.5 t Deflection pulleys NATO sockets Shovel and broom Waste bin Aluminium tread plates on the platform Side tread plates for easier access MKG HMK283SHP Ta5 loading crane: 5-stage hydraulically extendable telescopic crane Max. hydraulic outreach: 12.75 m Lifting capacity 8,320 kg at 3.0 m Lifting capacity 4,840 kg at 4.95 m Lifting capacity 3,340 kg at 6.90 m Lifting capacity 2,520 kg at 8.85 m Lifting capacity 2,030 kg at 10.80 m Lifting capacity 1,700 kg at 12.75 m 430° slewing range Slewing torque: 24,500 Nm ACS3 crane stabilizing system Hydraulically extendable outriggers 5.93 m Outriggers hydraulically pivotable to 180° Radio remote control with linear levers Hose equipment for 2 auxiliary devices incl. quick couplers Multi-coupler with parking station LED work lights Lighting package with warning lights Mechanical locking of crane column Top point behind driver's cab Paintwork RAL 9005 deep black Further information available on request. Subject to change, prior sale, and errors.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Pedpey Rnqfefx Aahjpu Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,026 mm, total width: 996 mm, Tested forklift battery for your forklift - 80V 6PZS 750Ah - DIN A Pedjy Rnp Iopfx Aahepu + 1-year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types can be installed as needed) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,026 mm Width 996 mm Height 627 mm Weight: approx. 1,730 kg Compatible with the following models and others: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Common battery sizes available, please inquire. Transport possible.

Condition: reconditioned (used), functionality: fully functional, Complete drive axle for Still R60-35, item no. 0391459 incl. motor GF 186-24/1.3; 80V/180A/12.5kW/Fab no. 98460106 Refurbished Ppsdpfjwhvvqsx Aaheu 2 units available

Year of construction: 2000, condition: used, Punching machine Premium quality HM 35/350 BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm² Psdpfeg Dgyxjx Aahepu

Condition: used, Year of construction: 2009, 1st Folding Unit 6 Buckles MBO Vario Control incl. touchscreen Flat pile feeder Working width 53 cm Spiral folding rollers in parallel fold with standard PU roller coating Stainless steel knife shafts, 30 mm Ppsdpfx Aoxc If Roaheu Motorized folding rollers + MW adjustment VACUSTAR separation head Feeder extension to 100 cm (instead of 84 cm) 2nd Folding Unit Vario Control Working width 53 cm Spiral folding rollers Motorized folding rollers + MW adjustment Sheet monitoring with transfer table Including MBO Delivery A56 The ASP delivery shown in the photos is not included. Included is the A56 delivery as shown in the last photo.

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor Pjdpfx Aajxlf Hwshopu - Stabilization kit for three-point linkage - Bowden cable control Flail rotor 1000 - Central mounting - Direct drive - Working width: 1.00 m - Weight approx. 140 kg

Condition: new, Year of construction: 2025, Fits to following machines: Powerscreen Warrior 1400, Warrior 1800, Chieftain 2100 Gear triple pump X1A504650335033/124003/1C we are polish distribiutor of David Brwon Hydreco original genuine new pumps. All Powerscreen pumps on stock. Pump designed for Powerscreen Warrior 1400, Warrior 1800, Chieftain 2100 Pedpfxoigvcte Aahopu

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) Ppedpexb U Txsfx Aahsu 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.