Used Newfoil Machines 3500 Servo for sale (68,439)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: ........, Basic Specification: Two-station machine with a 250 mm web width. Print Head: One hot foil printing and embossing unit. Print position adjustable longitudinally, laterally, and rotatively. Features quick-change die plates. Die-cutting Station: Integrated die-cutting and punching unit with adjustable cut position longitudinally, laterally, and rotatively. Quick-change cutter plates for rapid setup. Web Indexing: Digital electronic web registration system with a zero-backlash indexing drive. Unwind Unit: 1,000-metre unwind capacity, powered nip with loop feed to a vacuum tension drum for consistent web tension. Rewind: Separate label and matrix rewinders with independent rewind motors, reversible for both inside and outside rewinding operations. Foil Indexing: Two servo-driven foil pull units with quick-release nip rollers for efficient foil management. Njdpfxjxt N Tws Aftjcw Direct Remote Access Unit: Enables direct remote access to the Newfoil machine via the Internet. The unit connects to your company network using a standard Ethernet cable. Firewall-friendly, utilizing a fully secure SSL-based VPN tunnel. Temperature Control: Digital temperature control with LED display, ranging from 0°C to 400°C. Operating Speed: Variable speed servo drive. Maximum throughput: 18,000 impressions per hour; minimum: 2,000 impressions per hour. Guarding: Fully enclosed “Clear View” guarding system with interlocked doors in compliance with current E.C. safety regulations. C.E. Mark: Each machine is C.E. marked and individually certified.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Nsdpfexpqy Djx Aftecw Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, Permanent magnet DC servomotor INDRAMAT from MAHO milling machine Type: MDC 10.10H / MMA-0 (MDC10.10H/MMA-0) Serial No. 12423 Component No. 230837 K-M = 0.30 Nm/A Ieff = 11 A Imax. = 75 A Njdpsznn H Ejfx Aftecw Umax. = 170 V n max = Maximum speed = 3000 rpm Tacho: 0.317 Vs/rad Shaft diameter: 22 mm Shaft length: approx. 21 mm (shaft extension from centering edge) Centering diameter: 70 mm, 7 mm height Bolt circle diameter: 92 mm, 4x M8 mounting screws Overall length: 270 mm (without shaft) Housing diameter: 133 mm Weight: approx. 20 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2025, coil width: 200 mm, product width (max.): 200 mm, overall weight: 80 kg, warranty duration: 12 months, working width: 200 mm, product height (max.): 3 mm, roll width: 64 mm, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Ncsdsvptz Iepfx Aftow Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Condition: used, functionality: fully functional, input voltage: 400 V, Equipment: documentation/manual, Precision cross-honing machine Used Sunnen Eclipse EC-3500 CGM-27 Bore diameter – honing range: 1.5 – 165 mm Ncedpfxsyx Dv Ho Aftew Stroke length – honing length: 6 – 170 mm Spindle speeds: 200 – 3,000 rpm Stroke rates: 60 – 500 strokes Total power requirement – spindle drive: 4.1 kW Stroke motor: 1.1 kW Machine weight: approx. 1200 kg Depth: 1.6 m Width: 1.2 m Height: 1.9 m SICK safety light curtain Oil filtration / filter system for the honing oil is integrated – spare filter cartridges available Horizontal cross-honing machine / honing machine, TYPE EC 3500, and operating manual Documentation/manual, nameplate available An inspection under power is possible after prior appointment. Price on request All technical specifications are subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: used, Year of construction: 1995, Sunnen Eclipse EC-3500 CGM-27 Bore diameter – Honing range Njdpszl U Evjfx Aftscw 1.5 – 165 mm Stroke length – Honing length 6 – 170 mm Spindle speeds: 200 – 3,000 RPM Stroke rates: 60 – 500 strokes Total power consumption – Spindle drive: 4.1 kW Stroke motor: 1.1 kW Machine weight: approx. 1,200 kg

Year of construction: 2022, operating hours: 9,500,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 4131.05/22, -Bograma BSR 550 Servo with pallet feeder -Cylinder heater -Registration mark reader -Interface box for controlling an external vacuum valve -Stack delivery STA 550BK for a maximum of 9 sheets Ncjdpfjzl Skpox Aftjw -Performance: 12,000 sheets/hour, 165 m/min -Minimum format: 210 x 297 mm -Maximum format: 550 x 750 mm

Condition: good (used), DC spindle motor, electric motor, DC motor, servo motor -Power: 11.5/18.5 kW -Speed: 1160/3500 rpm -220 V -79/96 A -Speedometer: 6V/krpm -Shaft: Ø 50 mm Nodjb A Nguspfx Aftscw -Design: B3 -Additional cooling -Dimensions: 910/340/H400 mm -Weight: 200 kg

Condition: used, Year of construction: 2007, machine/vehicle number: SCIAC41, Used Rinsing Machine ALFATEK up to 3500 bph This Rinsing Machine offers a high-precision solution for the bottling industry. Alfatek manufactured this machine in 2007, and it reaches a speed of 3500 bottles per hour (BPH), making it ideal for medium-sized plants that demand efficiency and reliability. Nodpfx Ajvgvnfoftscw Technical Features of the rinsing Machine Alfatek Firstly, the rinser features 16 gripping clamps for holding bottles, ensuring high stability during the rinsing process. Furthermore, fixed nozzles provide uniform and complete cleaning of glass containers. The machine operates in a clockwise direction and offers adjustable speed, which facilitates easy integration with other equipment in the bottling line, thereby enhancing operational flexibility. Dimensions and Specifications Regarding dimensions, the Used Rinsing Machine ALFATEK up to 3500 bph optimizes its use in industrial spaces. It measures 200 cm in the front, including the conveyor channel and electrical panel, 175 cm in depth, and 200 cm in height. Consequently, these specifications allow the machine to fit into existing plants without requiring significant structural modifications. Formats and Containers Moreover, this machine handles glass containers and supports various bottle formats, including 0.75 L, 1.0 L, and 2 L. Its versatility suits different types of products, such as wines and oils, improving production efficiency by managing multiple formats without frequent equipment changes. Reliability and Maintenance Since 2007, the rinser has demonstrated remarkable reliability. Notably, Alfatek designed the components to be robust and easy to maintain. Operators can quickly access wear parts, thereby allowing for swift interventions that minimize downtime. Integration and Automation In addition, operators can easily integrate the Used Rinsing Machine ALFATEK up to 3500 bph with other machines in the bottling line, thanks to its control and speed adjustment features. The advanced electrical panel provides an intuitive interface, thereby reducing the learning curve and improving overall operational efficiency. Conclusion of the rinsing Machine Alfatek In summary, the Used Rinsing Machine ALFATEK up to 3500 bph offers an excellent solution for bottling plants that need a versatile, reliable machine with high production capabilities. Its technical specifications, compatibility with various bottle formats, and ease of maintenance make it a safe investment for optimizing production processes. Furthermore, its robust design and ease of integration ensure that it meets the demands of modern bottling operations.

Year of construction: 2011, condition: like new (used), I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank Material pressure zone pneumatic adjustable End cutting saws pneumatic adjustable Rough milling manual adjustable Tilting radius milling top + bottom pneumatic adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Hot-air blower Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 12m/min. Nodpfx Aonwkbcsftjcw PUR glue possible. Second glue tank absolutely new included. Only 6.153 meters edgenbanded ! Machine practically new. Very good condition, fully working!

Condition: excellent (used), Year of construction: 2016, I sell the fully equipped edge banding machine IDM Stefani Solution MDR T-ER4S, year 2016: Njdpfxsyw Aivj Aftecw Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Heating lamps Edge banding with preheating tank / AirFusion included Material pressure zone servomotoric adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotoric adjustable Corner rounding 4-motor servomotoric adjustable / Multiradius unit Radius R2 scrapers servomotoric adjustable / Multiradius unit Glue scrapers manual adjustable Polishing brushes Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 10-60mm Edge thickness 0,3-15mm Feeding speed up to 25m/min. PUR glue possible. FE-MA-TECH unit included Second glue tank absolutely new included. Only 344.000 meters edgenbanded ! Very good condition, fully working!

Condition: used, Miter chop saw for aluminum (special machine construction with 4 servomotors) Circular saw, miter saw, crosscut saw Year of construction: 2002 Saw blade diameter: 500 mm Cutting range at 90°: Round Ø 180 Rectangle 350 x 140 mm (through crosscut) Cutting range at 45°: Round Ø 180 Rectangle 350 x 100 mm (through crosscut) Base carriage guide length: 1100 mm Travel on the base carriage (forward/backward): 650 mm Travel on the stand (up/down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power connection: 400 volts, 50 Hz Njdjdzp T Dspfx Aftjcw - Controlled crosscut movement - Controlled saw blade height adjustment - Controlled miter cut through pivoting saw head - Controlled miter cut through tilting saw head - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gearbox (Motor MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Axis movement perpendicular via INDRAMAT servomotors and ball screw spindles (Motor MKDO41B-144-KP1-KN) - A total of 4 Indramat servomotors are installed - Very good German machine engineering Space requirement: L x W x H 1150 x 1100 x 1400 mm Weight: approx. 360 kg Good condition This unit comes from a special machine for specific products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: new, Lenze ECSEP016C4B servo module, ID no. 13350052 SN: 000005, unused, 100% fully functional, scope of delivery as per photos. Nedpfx Afox Et Ekotocw

Condition: new, Lenze ECSEP016C4B servo module, ID no. 13350052, SN: 000012, unused, 100% functional, scope of delivery as shown in photos. Ncjdpfx Afox Et Eqotew

Condition: ready for operation (used), KUKA BMC30/135Kb servo drive, used, with normal signs of wear, 100% functional. Ncodpfx Aoi Ebxfjftew

Condition: new, Lenze ECSEP016C4B servo module, ID no. 13350052, SN: 000002, unused, 100% fully functional, delivery as per photos. Ncsdpfx Afex Et Edetjw

Condition: ready for operation (used), AEG MS350-0000-000 Permanent Magnet AC Servo Motor, Serial Number: 93-IC-483, mounting hole spacing: 71 x 71 mm, drive shaft diameter: 14 mm, used, shows normal signs of wear, 100% functional. Njdpfx Afei D Ey Dstjcw

Condition: as good as new (ex-display), Conveyor belt for WM3500/WM4000 machine Conveyor belt length: 2.9 m Width: 900 cm Height: 1.05 m Nedpfx Afezn I Ivetocw

Condition: used, DC spindle motor, electric motor, direct current motor, servo motor -Power: 5.5/7.5 kW -Speed: 1160/3500 rpm Nedpod Hw H Ujfx Aftscw -Shaft: Ø 48 x 110 mm -Construction: B3 -Additional cooling -Dimensions: 780/330/H260 mm -Weight: 200 kg

Year of construction: 2011, condition: used, functionality: limited functionality, machine/vehicle number: 8802L1280, We offer this used Instron 2527-113 / 104999 servo-hydraulic dynamic testing machine, model 8802, manufactured in 2011. Manufacturer: Instron Ncjdozgvrtepfx Aftow Model: 2527-113 / 104999 Serial number: 8802L1280 Control type: Digital control electronics Force: 160 tons Working width: 1120 mm Stroke: 0 - 200 mm Stroke rate: 0 - 6000 1/min Table area: 800 x 560 mm Ram adjustment: 0 - 1100 mm Weight: 2.5 tons Space requirement (W x D x H): 1.1 x 1.2 x 3.6 m If you have any questions or require further information, please feel free to contact us.

Condition: used, Pipe bending machine, mandrel bending machine, bending machine for pipes and profiles Pipe bending unit with Siemens servo motor and planetary gearbox Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round pipe Ø 15.4 x 0.8 mm, R60mm - interchangeable bending tools and bending dies - drive of the bending tool via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - pneumatic height adjustment of the bending die via Festo pneumatic cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm Weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Nsdpsd E A I Ijfx Aftscw Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The stated price refers to 1 piece of bending unit with servo motor. If required, we also sell individual components of the bending unit. We also offer the electrical components for controlling the servo motor. We also have hydraulic units for sale.

Year of construction: 2024, condition: good (used), functionality: fully functional, We are offering this well-maintained em machines Liquid Mate Sense Premium monitoring and control system for cutting fluids, manufactured in 2024, featuring a completely new set of sensors. Manufacturer: em machines Ncsdpfx Aozm Hahoftew Model: Liquid Mate Sense Premium Year of manufacture: 2024 Condition: good Category ID: 661 Type: Monitoring and control of cutting fluids The LiquidMate Sense Premium is an innovative, standalone plug-and-play solution for fully automated monitoring and control of cutting fluids in individual machines and central systems. It precisely measures concentration, pH value, and temperature, monitors the fill level, and actively regulates the cutting fluid. A major advantage is the circulation monitoring, which ensures regular movement of the cutting fluid and prevents bacterial growth and fungal contamination. The solution is low-maintenance, easy to install, and offers versatile connectivity, including an integrated online dashboard for convenient remote monitoring. LiquidMate is CE and UKCA certified and works with all common cutting fluids, contributing to environmentally friendly and cost-effective operation. If you have any questions or require further information, please send us a message or call us. We have 11 of these units available, and the machines can also be inspected. We can also offer them as a package.

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. Njdpszk U E Tsfx Aftjcw A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: ready for operation (used), Bosch SDB5.250.015-01.000, brushless, permanent magnet servo motor, serial number: 350000065, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Ncsdpfx Aoi D E U Aeftew

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, NEWFOIL 2000 MKII year 1996 web with 125mm Max. printing area 125x150mm Max. die cutting area 125x150mm Speed 6000 cycles Re-register cell can use 2-foils unwind Njdpfx Aeyrzzfjftecw rewind