Used Monforts Rnc 400 A for sale (77,338)

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details. • Swing over bed: 410 mm • Swing over radial slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity/material clearance: 65 mm • Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW • Max. torque: 500 Nm • Feed drive: Three-phase servo drives with electronic safety monitoring • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning • Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm) • Coolant system: 310 L tank, 3 bar, 40 L/min Klodpfx Aoy If A Hjbfou • Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping • Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis) • Tool measurement setup • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) • OPTIONAL: mounts, flanges, and reducer tubes • The tailstock can only be positioned manually, whereas the quill stroke is programmable. • The distance between the face of the chuck and the maximum turning length is approx. 610 mm. • The distance between the face of the chuck and the extended quill tip is approx. 1000 mm. • The distance between the face of the chuck and the retracted tailstock without the quill tip is approx. 1160 mm. Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 AC machine we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Material clearance (bar capacity): 65 mm • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter • Driven tools: 12 stations; max power 13.6 kW (25% ED); max torque 28.9 Nm; max speed 4500 rpm • C-axis: 0–25 rpm; 300 Nm holding torque • Tailstock: Separate guide rail; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; steel welded construction on reinforced concrete base with 3-point support • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional equipment Ksdpfjy Ifptox Abfolu • Hydraulic hollow clamping device • Parts catcher • A6 drawtube for collet chuck • 200 mm suction nozzle • 1 GB storage expansion • Network card • Driven tools with tapping without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 2000, condition: ready for operation (used), Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available. Klodpfxjtxquhs Abfou

Condition: used, Year of construction: 2008, turning diameter 280 mm Kodpfx Aoydfqzjbfjlu turning length 600 mm Turning diameter: 280 mm Turning length: 600 mm

Condition: good (used), Year of construction: 1998, Ref. -No.: 10548 Manufacturer: MONFORTS Type: RNC 5 A17 Year of construction: 1998 Type of control: CNC-Steuerung Control: Monforts Storage location: Halberstadt Country of origin: Germany Machine-No.: 303XXXX Chuck diameter: 250 mm Centre Distance: 1080 mm Spindle Diameter In Front Bearing: 100 mm Spindle head according to DIN 55027 (size): Gr. 8 Circumferential diameter over radial slide: 290 mm Max swing diameter: 500 mm Klodpsxmd T Eefx Abfou travel of the cross slide: 265 mm Tailstock outside diameter of the quill: 80 mm Tailstock maximum quill stroke: 160 mm Tailstock inner cone: MK 5 Type Material flow max.: 70 mm Turning Speed Range: 2 - 2800 rpm Further information: The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2001, Technical details: turning diameter: 500 mm turning length: 1000 mm control: Siemens 840 D spindle: 42 / 28 kW spindle turning speed - stepless: 31 - 4000 1/min max. torque on the spindle: 345 Nm Kledpoyv Ha Ajfx Abfou c-axis: 360000 x 0,001° feeds -stepless-: mm/min rapid traverse: mm/min turret stations / rotary tool stations: 12/12 VDI 40 RPM of rotary tools: 2000 1/min diameter of quill: 90 mm quill stroke: 80 mm tailstock quill taper ISO: SK 30 Tailstock Travel: 600 mm Power rotary tools: 3,5 kW : 22,5 Nm Rotary tool holders: 4 ax./ 4 rad. spindle passage: 66 mm total power requirement: 30 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 8x 3 x 4 m Accerories Power Chuck Programmable Tailstock Chip conveyor

Condition: new, For sale: Professional power controller (thyristor-based) Advanced Energy Thyro-A series. The device is NEW – never used (warehouse stock). High-end industrial equipment designed for advanced production installations. 🔧 Technical specifications: Manufacturer: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Kledpfx Abjyw T Ipsfsu Voltage: 400 V Current: 350 A Output: Relay Out 4A / 250V Type: thyristor power controller (SCR) ⚙️ Applications: industrial furnaces heating systems industrial automation power control in production lines 📦 Included in the set: 3x Thyro-A modules industrial enclosure / heat sink cooling fan full set as shown in photos ✅ Condition: NEW – unused May show minimal signs of storage. Fully functional.

Condition: excellent (used), Year of construction: 2004, Technical data: Maximum turning height: 300 mm Maximum turning diameter over bed: 600 mm Maximum diameter over slide: 500 mm Distance between centers: 1500 mm CNC control: FANUC 21i-TB Revolutions: 16 – 4,000 RPM Spindle motor power: 18.5 / 30 kW Kedjy Ub Ufjpfx Abfolu 3-jaw chuck: 315 mm Tool changer: 12 stations CE marking Dimensions (length x width x height): approx. 6000 x 2300 x 2100 mm Weight: approx. 7.5 tons Accessories: 12-position tool turret Numerous tools Numerous driven tools Hydraulic chuck with additional jaws Tailstock W+W filter system Chip conveyor The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, CNC turning machine MONFORTS, type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control system FANUC Series 18i-TB Maximum turning diameter over the bed cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - with tailstock, chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - Collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 - Chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Kledszfau Aspfx Abfju Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 538/04, turning diameter over cross slide: 300 mm, turning length: 600 mm, spindle bore: 52 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, quill stroke: 90 mm, torque: 240 Nm, overall weight: 7,000 kg, swing diameter over bed slide: 440 mm, Equipment: documentation/manual, Well-maintained Monforts RNC 500, can be inspected under power. Fanuc 18 i TB control 12 driven tool stations with VDI 40 mount Counter-spindle collet 173 E Main spindle Kitagawa 3-jaw chuck BB 208 Hydrostatic circular guideway FAPT programming system Main and counter spindle Chip conveyor Coolant system with flat bed filter Parts catcher with transfer device Ejector in counter spindle Short bar loader Samsys Multi 3000 Reduction tubes Rinse gun C-axis Y-axis Ksdpfx Aoyrbmhjbfelu Further machine equipment – see photos

Condition: used, Year of construction: 1993, CNC Lathe Monforts RNC 4 with KNCS 260 chuck Collet up to Ø 60 mm Bar feeder up to Ø 65 mm Year of manufacture: 1988 Lots of accessories CNC Lathe Monforts RNC 4 with 15-series control and C-axis, KNCS 260 chuck, year 1995, lots of accessories RNC 5 Chucking-only lathe Year of manufacture: 1992 Includes many jaws Monforts RNC 7 with automatic tailstock, 1500 mm Z-axis travel Driven tools with spindle indexing every 2.5° Chuck 500 mm, many tools and jaws included Year of manufacture: 1993 Very good condition The last CNC lathe, an RNC 7-1000 with automatic tailstock, steady rest, C-axis Lots of tools and jaws Klsdpfx Asyq R T Ijbfeu Ideally, everything would be sold as a package — 5 Monforts lathes with a very large amount of accessories.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. Klodpfjxcwdvex Abfeu All tools and accessories are included. Inspection possible by appointment.

Condition: used, Keba analog module AM 450/A Kemro K2-400 – suitable for Engel CC200 control - removed from an operational machine - fully functional Ksdpfow Ah N Sox Abfelu Manufacturer: Keba Type: AM 450/A Kemro K2-400 Manufacturer No.: 054202

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine - fully functionalmanufacturer: Keba type: DI 470/A Kemro K2-400 manufacturer no.: 054943 Kljdpfx Abjw Ah N Esfeu

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine - fully functionalmanufacturer: Keba type: DI 470/A Kemro K2-400 manufacturer no.: 054943 Ksdpew Ah Nlefx Abfslu

Condition: used, Keba temperature card TM 450/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine - fully functionalmanufacturer: Keba type: TM 450/A Kemro K2-400 Kjdpfxsw Ah Nfj Abfolu manufacturer no.: 054492

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Klsdpfszdf Sxjx Abfju Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: as good as new (ex-display), functionality: fully functional, FRONIUS TPS 4000 ROBOT SET .) Fronius power source (Tps4000) .) Fronius cooling unit (Fk 4000) .) Fronius wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package .) Fronius RCU 5000i .) Interface = INTERBUS RUGGED LINE (Optionally available: Profibus + €800 or Devicenet + €1400, others upon request) Manufacturer's list price: approx. €14,000 net We have €5,990 net - VAT deductible - invoice from the dealer. We always have several devices in stock in a wide variety of configurations. We are happy to receive your inquiries. Kedpswbi E Ssfx Abfslu The prices listed start at €... Prices/offers are customized based on the device configuration. Sample images of the devices. In stock in Vienna, 1230. Pallet shipping available for an additional charge: Austria approx. €180 Germany approx. €210 Europe upon request

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market. Kedpfxoxf T I Nj Abfelu

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Hydraulic saw feed and quick clamping vice with clamping pressure reduction NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Kledpfxey S Eyge Abfou Flat 45 ° [mm] 140 x 120 Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Square 45 ° [mm] 120 Square 30 ° [mm] 100 Round 90 ° [mm] 140 Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Documentation 4x saw blades 1x feed roller conveyor 2m

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, control type: CNC control, actuation type: pneumatic, rotational speed (max.): 3,000 rpm, overall weight: 640 kg, Equipment: CE marking, documentation/manual, The MACC TA 400 A CNC is an automatic circular saw designed for cutting aluminium and non-ferrous materials in industrial serial production. Kljdpfx Ajy Uvqzebfsu Main Technical Data Parameter Value Machine Type Automatic CNC circular saw for aluminium Blade Diameter Ø 400 mm Blade Bore 32 mm Motor Power 2.2 kW Power Supply 3 × 400 V Blade Speed 3000 rpm Vice Opening 180 mm Cooling System Emulsion cooling system Clamping System 2 pneumatic vices Weight Approx. 510–640 kg Machine Dimensions Approx. 3450 × 1700 × 1420 mm Cutting Capacities at 90° Profile Type Capacity Solid Round Material 60 mm Tube / Round Profile 140 mm Square Profile 110 × 110 mm Rectangular Profile 180 × 100 mm

Condition: used, Year of construction: 2006, operating hours: 60,000 h, clamping force: 200 kN, displacement volume: 154 cm³, injection pressure: 2,500 bar, overall weight: 9,500 kg, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz delivery time: on request Kedpjyzt R Sjfx Abfjlu terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request Ksdpfx Abjxl Hi Tjfslu terms of payment: 100% prior to delivery

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 820 mm, turning length: 6,000 mm, GURUTZPE lathe model Super A, 6,000 mm between centers, swing on bed 820 mm, on carriage 550 mm, in the neckline 1150 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 3 steadys . Kedpov Rm Iwofx Abfolu

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped ⭐ Device description/scope of delivery: Fronius Tps 4000 device fully equipped - nothing more is possible! - Pulse 400 amp power source - Fk 4000 FC cooling device with the optional filter including flow control - VR 4000 with the optional rollers at the bottom + extra long connecting hose package + metal feed rollers - only the best of the best installed. - Fronius Aw5000/aw4000 hose package with Job Master function on the burner (==>Display on the torch / amps, job, feed, arc adjustable on the torch) Photo = scope of delivery. Kljdopgkkbopfx Abfeu New price approx. 15,000 euros (net) we offer it for 1/3 new price. Not comparable to Transsteel scrap. Why it's better to buy from us than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have 40-60 pieces in stock. Only these Fronius devices, no other manufacturers! - We don't just push the devices through, we disassemble them, inspect wear parts, replace them and only when everything works perfectly are the devices sold. - All of our devices are sold with the popular Fronius burners. NOT a 100 euro E*b*a*y burner but QUALITY! Depending on the equipment, the Fronius burners cost between 650 euros and 900 euros net! - Our devices are “all” clean and have no burn holes in the displays or countless burn holes/dents scattered throughout the device! You are buying an item from us that is worth seeing and doesn't look completely finished! - As a customer of ours, you have the opportunity to obtain suitable spare parts and support cheaply if the worst comes to the worst. - You will receive a proper invoice from us with VAT shown. All devices can be viewed, paid for and picked up by appointment at our main warehouse in Vienna! Insured shipping on a pallet is of course possible!