Used Mahros Ponte C/S for sale (89,728)

Year of construction: 2010, condition: excellent (used), I sell the Destacking device SCM MAHROS PONTE C/S, year 2010. Stacking device one side feeding / also suitable for pallets. Catching head rubber pads system parallel Vacuum-System (including pump) Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Nljdpfx Aewyf Utsfaea Outfeed table front roller-system Outfeed feeding station for stacked material Available immediately. Ready for work.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables Nedoyywi Aopfx Afajla N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: J10039A) Gantry-portal Loader (Double pick-up station) "MAHROS" Mod. Brush J10039B) 1st Double-side Sizing & Edge Bander "IDM" Mod. Activa SB 1/9900 J10039C) In-feeding Rollerway "MAHROS" Mod._____ with 90° Turning device (from lengthwise to crosswise) with double cone system J10039D) 2nd Double-side Sizing & Edge Bander "STEFANI". Mod. Performance SB2 J10039E) 90° Converyor Translator "MAHROS", complete with motorised roller conveyor and 90° motorised belts to translate the panels to the MAHROS Unloader J10039F) Brush-cleaning machine "WANDRES" Mod. BI46/1/1300 Njdpfohmkxqsx Afaola J10039G) Gantry-portal Stacker (Double station) "MAHROS" Mod. Brush

Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Nedpfx Afjx Nv S Ujaela Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI

Condition: new, Year of construction: 2025, functionality: fully functional, We would like to sell 28 rolls of Polyskin "S" Surlyn film – uncoated. Thickness: 0.150 mm Width: 540 mm Running length: 300 m Nodpfx Afsx Tf N Roasla

Condition: used, Double storage station stacker. Designed to serve production lines for drilling, squaring, edging, squaring, pantographing, sanding and painting without operator supervision. Fully automatic not need for manual adjustments during the manufacturing process. Working dimensions: * Maximum length: 3000 mm * Maximum width: 1300 mm * Automatic double station panel unloading system. * Work capacity 13 minute cycles * Panel gripping system via motorized arm with suction cups with vacuum drive system Nlodpfoqvt D Uex Afaoa TECHNICAL DETAILS TO BE CHECKED

Condition: used, Double picking station feeder. Designed to serve production lines of drilling, squaring, edging, squaring, pantographing, sanding and painting without operator supervision. Fully automatic not need for manual adjustments during the manufacturing process Working dimensions: * Maximum length: 3000 mm * Maximum width: 1300 mm * Automatic double station panel unloading system. * Work capacity 13 minute cycles * Panel gripping system via motorized arm with suction cups with vacuum drive system TECHNICAL DETAILS TO BE CHECKED Nedpfxsqvt Ecs Afasla

Condition: excellent (used), CTS Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, suitable for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industry. The unit is in used condition and can be inspected in detail as shown in the images. Current display: manual operation / stop. Operating hours according to display: Technical Data: - Temperature range: -70 °C to +180 °C - Humidity range: 10% to 98% RH - Dew point range: -10 °C to +94 °C - Test chamber volume: 600 liters - Temperature change rate according to IEC 60068-3-5: - Heating: 6.0 K/min - Cooling: 7.0 K/min - Electrical connection: 400 V 3/N 50 Hz - Nominal power: 14.6 kW - Nominal current: 22.0 A - Protection class: IP 22 - Refrigerants: R404A / R23 - Pre-cooling stage: R404A – 4.5 kg Nsdpfx Afsy Hkblsasla - Cooling stage: R23 – 2.1 kg / 14.5 bar - CO2 equivalent: 17.65 t / 31.08 t - GWP: 3922 / 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar Features / Equipment: - Observation window in the door - Stainless steel test chamber - LED test chamber lighting - CTS LCD control panel with digital controller - Test specimen protection / temperature limiter - Water-cooled refrigeration unit - Automatic water top-up / deionized water inlet - Test chamber and condensate drain - Volt-free contact - Digital outputs - RS232 interface - Ethernet interface - Lateral cable ports Cable ports according to installation plan: - 1x port NW 50 - 2x port NW 125 Test chamber dimensions according to installation plan: - approx. 850 x 850 x 830 mm External dimensions according to installation plan: - approx. 1900 x 1120 x 1875 mm Weight / Mass according to documentation: approx. 750 kg Scope of delivery: - CTS climate test chamber CS-70/600-5 - Including available documentation / test certificates - Delivery includes everything shown in the images Buyer assurance: - The unit can be viewed by appointment. - Loading by forklift can be arranged. - For any questions, please do not hesitate to contact us. Buyer safety information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used (Changes and errors in the technical data reserved!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2021, sheet width 2020 mm plate thickness 1,5 mm 135 ° 100 mm total power requirement 1 kW weight of the machine ca. 965 kg Nljdpfx Aoy Erw Eefaja dimensions of the machine ca. 2680 x 640 x 1100 mm NEW PRICE: 9,990 EURO Description: - Foot operation enables positioning of the sheet metal with both hands - Workpiece clamping and bending process are motorized via a chain drive - Manual adjustment of the bending angle, reading of the angle on a scale ring - Many bending options with segmented upper beam - Precise movement of the bending beam via large flat guides - Heavy, robust welded construction

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal Njdpfx Aoy Ehrxofasla 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: new, functionality: fully functional, empty load weight: 468 kg, maximum load weight: 1,532 kg, overall weight: 2,000 kg, loading space length: 2,530 mm, loading space width: 1,640 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Tipper 250/2 C S 2T NEW VEHICLE Internal dimensions: 253cm x 152cm Sidewall height: 30cm Platform height: 80cm Gross weight: 2000kg Payload: 1532kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x axles with 1350kg brakes Low chassis Fully welded hot-dip galvanized steel frame Aluminium profile side panels with tension latches Fold-down and removable on all sides Galvanized steel floor Support wheel 6 lashing eyes Reinforced 13" C-rated tyres with steel valve M+S tyres Mesh/rope hooks on the frame 13-pin plug Front marker lights Rear lamps with reversing, fog lights and triangular reflectors Top frame mounted on rubber bushings Hand pump with stowable handle Safety lock for top frame OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Loading ramps - Folding crank rear supports - Full LED lighting - Anti-theft device - Mesh netting (fine or coarse) - H-frame - Leaf mesh sides in various heights, also closed - Extension side panels in steel or aluminium 30cm with tension latch - Flat cover, with or without hoops - High cover, 140cm Additional accessories available on request! Plus shipping to Gera and vehicle registration certificate: €200 net Pictures are for illustrative purposes and may show accessories subject to surcharge. Haven't found the right trailer yet? Nsdpfxew A I Ete Afajla We have 50–100 vehicles in stock and available for immediate pickup at all times. Our workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravans. In addition, we have a large range of spare parts and accessories, also for trailers from different manufacturers. Visit us online or come by in person!

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C Nljdpfovx S Hhjx Afasa - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz - Rated power: 95 kW - Rated current: 150 A

Condition: used, maximum load weight: 25,850 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 05/2001, loading space length: 7,330 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 25 m³, total width: 2,550 mm, total height: 3,100 mm, Year of construction: 2001, Equipment: ABS, 2-axle Carnehl steel tipper body VIN: PC09163 Chassis / Attachments: * Air suspension * Landing legs * Tyres: 385/65 R 22.5 * Remaining tread: approx. 30% * 2 x SAF axles with disc brakes * Foldable underrun protection Body: * Steel tipper body / steel chassis * Volume: approx. 25 m³ * Load pressure gauge * Front-mounted hydraulic ram (Georg), max 250 bar * Rear chute 400 mm * Rear tailgate as pendulum gate, hydraulically opening upwards * Rear tailgate with 2 mechanical hook locks Weights: * Gross weight: 32,000 kg * Payload: 25,850 kg * Unladen weight: 6,150 kg Other: * German registration New main inspections / safety checks or changes to weight rating (downrating/uprating) are available upon request. We are also happy to assist you in obtaining export/transit license plates, and can arrange transport of your purchased vehicles within Germany. Please contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing or typing errors, changes, prior sale and mistakes reserved! Nljdpfoxc Affex Afasa ---- Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. Thanks to our many years of experience in reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the supply of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our clients an excellent, all-inclusive service package and provide them with a competent contact to support them in buying or selling vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organization of special transports We are happy to assist you with the organization of special transports. Temporary/export plates We are happy to help you obtain export/temporary license plates. Handling customs formalities We are happy to assist you in handling customs formalities.

Year of construction: 2000, condition: ready for operation (used), Columbus C S Contura Nedpfxjvg Inke Afaela Permanently elastic press cushion for every veneer press 2200 x 1000 mm

Condition: used, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Bobolowski, servo motor -Type: HTBL-S 070/035-3SPE-2-1111-C -Voltage: 700V -Shaft: Ø 14 x 25 mm -Techn. Data: see photo type plate Nljdpfx Afjm Sk Iheaea -Number: 2x servomotors available -Price per piece -Dimensions: 140/70/H120 mm -Weight: 2.1 kg/pc.

Condition: used, used, top condition, hardly used many equipment cleaned, function checked, manufactured by Hapfo-Columbus type C-S SINUS - vacuum enineering for individual form glueing and form veneering - C-S SINUS are suitable for easy and safe form glueing of round furniture parts per only one basic template (without contra template) - used outstanding for form veneering from easy profiles and roundings with commercial veneers or plastic covers - can be easy and rationally extensive form parts like bar desks, bars and counters completely without template building form-glued - with C-S SINUS bars, bar desks, ceiling panels partitions, doorway arches etc. can be manufactured without templates in layer glue procedure. C-S SINUS is suitable for arches with a radius starting from 250 mm up to straight elements for vacuum-layer glue procedure without template inclusive: Nljdpfx Ajvwgfcjfasa - 20 piece C-S SINUS arch stands solid arch stand for screwing on to workshop ground, inclusive holding device for the inserted workpiece - C-S SINUS Vacuum bag (effective surface 4000 x 600 mm) original price ca. 5.500,-- located in 97447 Gerolzhofen sale in current condition - free on truck -

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Nedpfx Aew R Rt Isfajla Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components Nledpfxjvitmds Afaja 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nljdou U Ixmspfx Afaoa Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2010, condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Nedpferbiyfox Afasla

Condition: ready for operation (used), Balluff BIS C-620ST2-S evaluation unit version 1 . 3 used 100% functional Nlsdsi D T D Sopfx Afaja

Condition: ready for operation (used), Balluff BIS C-620ST2-S evaluation unit software / hardware version 1 . 3 used 100% functional Nlodoi D T D Iopfx Afaja

Condition: ready for operation (used), Balluff BIS C-620ST2-S evaluation unit, used, good condition, 100% functional Nledpfoi D T D Dox Afasa

Condition: ready for operation (used), Hydac OLF-5/4-S-370-N-N5AM002-C filter system SN: MK116904 with FCPA171B-4 / 6018870 motor, Hydac VM 2 C.0 pressure switch and FZP-1/3.1/P/71 cooler, used, minor signs of wear, 100% functional, scope of delivery as per photos Nlodpfxony Dngj Afasa

Condition: used, functionality: fully functional, This line consists of: Nlodjx S Eu Depfx Afaoa - Filler - Capping machine and cap feeder Production capacity will depend on the packaging format and the product to be filled. ZALKIN CAPPER specifications: * Model: T6069 * Number of heads: 20 * Output: 25,000 bottles/hour Zalkin capping machines are designed for crimping aluminum screw caps (for carbonated and non-carbonated beverages). They can also be configured for the application of various types of aluminum or plastic closures (pre-sealed aluminum or plastic caps, screw-on or tamper-evident caps). The SIDEL cap elevator/orientator combines three functions in one: lifting, orientation, and feeding. The system efficiently orients caps while optimizing footprint. The design allows orientation of caps from 20 mm to 120 mm in diameter, in plastic or metal, based on geometric shape. Throughput reaches up to 2,000 caps/minute for standard formats and 1,000 caps/minute for sports-type caps. The cap feeder easily interfaces with the SIDEL cap air conveyor, eliminating the need for precise positioning of the unit.