Used Mütek Systemtechnik Cable Shredder, Shredder for sale (4,818)

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net Todpfxogmfa Ae Amrjc - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Year of construction: 2011, operating hours: 2,600 h, condition: used, functionality: fully functional, Cable granulator for processing cable scrap Shredder + WS15 granulator + belts Technical data Throughput depends on material and screen, max. 500 kg/h Operating hours approx. 2600 h Total weight 5.7 t Height 2.75 m Width 7.9 m Depth 10.1 m Tjdpfx Ameza Ahcorec Power consumption 58 kW at full load Power consumption 42 kW at idle Connection 400 V/550 Hz (fuse rating 125 A + 80 A slow-blow) The system is assembled (demo unit) and can be inspected and demonstrated on site. System overview 1x ICS CONTECT Pre-shredder Carrera-6D.LN WS15 1x ICS CONTECT Radial fan MGTN7 1x ICS CONTECT Shredder 40/60 VGA 1x ICS CONTECT Separation table DK 20.II 1x ICS CONTECT Mobile extraction system U-3000 1x ICS CONTECT Conveyor belt bg GBF 1x Föratec Lifting and tilting device (not installed) 1x Ventilation system with various ducts (not installed) - Spare blades for shredder available

Year of construction: 2019, condition: used, For sale is a used cable granulation plant. Technical Data: Tsdpfjw Sv Rzex Amrec Model: QJF-600 Voltage: 380V Frequency: 52.37 Hz Total Power: 53 kW Circuit Breaker: 125A Weight: approx. 3200 kg Dimensions: 3.5m x 2.0m x 2.8m Cable Diameter: 0.3–20 mm (dry cables only!) Capacity: 150–200 kg/h (cable/hour) Number of Blades: 10 rotating, 4 stationary Separator: L2.9 x W1.9 x H3.4 m Crusher: L1.97 x W1.4 x H1.95 m Output varies depending on the type of cable processed. This cable granulation plant is suitable for various types of copper cables with diameters up to 20mm. The cable shredder is straightforward to operate and very efficient. Up to 98.7% of the copper can be recovered from the cables. The machine price is €25,000 net, excluding shipping and installation. Transportation can be arranged upon request. Once you provide the postal code, we will calculate the delivery costs. Please note that transport costs must be added to the purchase price. Offer valid while stocks last. Subject to prior sale and errors! Installation and delivery available at additional cost!

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Tjdpfxjdwktko Amrec Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, Cable Granulation Plant GUIDETTI SINCRO MILL 530 + Pre-shredder PMG-H 900 – Immediately Available – As New For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: • Guidetti Sincro Mill 530 cable granulation plant • Guidetti PMG-H 900 pre-shredder • External filtration unit The system was installed, tested at a customer site, and then professionally dismantled. Due to a project change, the plant is now for sale. Condition: Nearly new (test operation only) Availability: Immediate ex stock – no lead time Price: Significant savings compared to new equipment — Special advantages: • Immediately available – no long lead times as with new machines • Only operated for test purposes – correspondingly minimal wear • Complete system incl. pre-shredder • Proven Guidetti technology Tedpfey Ahlyex Amrjc — Description: The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminum cables – without pre-sorting. The system consists of: • Granulator (cutter mill) • Zig-zag separator • Turbo mill for fine grinding • Dry separation table Material purity up to 99% can be achieved. In combination with the PMG-H 900 pre-shredder, the system offers a high-performance recycling line for industrial applications. — Technical Data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • For processing copper and aluminum cables — Technical Data Pre-shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Suitable for pre-shredding cables, non-ferrous metals, and plastics. — Note: The plant is available at short notice. Subject to prior sale. Inspection by appointment possible.

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. Tedpfx Amjv Rpxlerjc If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, power: 367.75 kW (500.00 HP), filling opening width: 700 mm, filling opening length: 1,200 mm, rotational speed (max.): 1,050 rpm, rotational speed (min.): 950 rpm, - Engine: Deutz 500 HP - Fill opening dimensions: 1200x700 mm - Rotor: 4 shafts and 40 stars - 950-1050 rpm - Throughput: 4-6 t/h Todpjy I Uwajfx Amroc - incl. new spare rotor & stars - completely overhauled & modernised

Condition: like new (used), Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Tsdpegl Nlmjfx Amroc . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit Tsdpfogfm Ryjx Amrsc . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: Eco Ring Rotor (for reduced energy consumption) Options: Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction lumber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Machine data: Motor: 11 kW; 400 V - 50 Hz - 3 phase, Knives: multi-reversible, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Hydraulically operated slide, Screen size optional (10 - 40mm), Suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (dry basis). Standard included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idling • Removable suction channel • Speed 70 - 100 RPM for higher throughput • Cycle control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Tsdpfx Amjd Db N Ioroc Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-belt magnet + €5,980 net - Control for conveyor belt and over-belt magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result. Tjdpfxjffh Ato Amrec

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 39,000 kg, rotor length: 3,200 mm, power: 320 kW (435.08 HP), rotational speed (max.): 58 rpm, input voltage: 400 V, Completely Overhauled Machine: Delivery time: November 20, 2026 Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without large contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2 x 160 kW (ABB) Screen perforation: Screen holes 148 mm Tsdpfewkilwsx Amrsc Control cabinet: complete with (frequency converter - ABB) Cooling system: included Working opening: 3190 x 1750 mm Filling volume: approx. 8 m3 Rotor length: 3190 mm Rotor diameter: 745 mm Rotor speed: 50Hz: 58 rpm Number of rotor knives: 36 pieces Knife dimensions, cutting knives: 145 x 145 mm Counter knives at the bottom: 9 pieces Stripper comb at the top: 9 pieces Feed system, hydraulic: 11 kW Total weight: approx. 39 t Dimensions L x W x H mm: 6250 x 3260 x 3090 mm Hopper: included Delivery time: November 20, 2026

Condition: good (used), Clean air extraction system Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Tjdporb D Njfx Amrsc Fan 2.2 kW Air flow rate 1850 m³/h, 400 V

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Tjdpfxev S Hyvj Amrec Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,900 kg, total height: 25,000 mm, total length: 2,710 mm, total width: 1,040 mm, input voltage: 400 V, We offer a high-performance, low-speed two-shaft shredder designed for effective and precise shredding of aluminum materials, including: 🔹 rods 🔹 strands 🔹 wires 🔹 flat bars 🔹 cables Todpfx Amjtvdcyerec The specially engineered shredding system prevents material from being dragged or crushed — aluminum is efficiently cut, not compressed. The knife design ensures clean and accurate cutting and eliminates the risk of vertically fed material passing through the chamber unshredded. The knives are made of certified, wear-resistant steel. The shredder is equipped with gear motors from a reputable manufacturer. Available motor configurations: 2 × 18.5 kW or 2 × 22 kW. Fraction size – to be agreed upon with the customer. Model RS8: working shaft length of 600 mm – identical construction to RS800 and RS1200 models. Manufactured in Poland.

Condition: used, Year of construction: 1991, total length: 1,520 mm, total width: 720 mm, power: 30 kW (40.79 HP), Fully overhauled, lubricated, and ready for operation. Automatic two-shaft hydraulic shredder designed for crushing and disentangling metal chips, plastics, wood, electrical cables, and other materials. It is controlled by a PLC that monitors sensors, manages shaft rotation, and automatically activates the reverse function, if several blockages occur within a short period, the shredder shuts down. In addition, the unit automatically switches off after a set period when operating without load. Technical Highlights: Power 30 kW Max hydraulic pressure: 250 bar Torque: 11,780 Nm 2 crushing shafts with blades Hydraulic drive with gear transmission (Valmet BB 3150CC) Tsdewk Egwspfx Amroc Automatic blade pressure adjustment (disc spring system)

Condition: used, Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 6193, type of input current: three-phase, Complete recycling plant available for sale, comprising a Lindner Micromat 2000 industrial shredder together with Godswill baling equipment, conveyors, control systems and associated plant. This is a substantial industrial recycling setup, previously used for processing waste paper/cardboard and producing compact, baled material. The plant is being offered as a complete package and represents an excellent opportunity for a recycling operator looking to acquire a ready-made processing system. Main equipment includes: Tedpfxsz Eh Ihe Amroc * Lindner Micromat 2000 industrial shredder * Manufactured in 2015 * Machine No. 6193 * Motor power 132 kW * 400V / 50Hz * Manufactured in Austria * Godswill GB-1108F baling press * Manufactured 2009 * Series No. 982472 * 40 HP * 415V / 50Hz * 72A * Additional Godswill paper machinery/baling equipment, with a machine rated at approximately 80 HP * Hydraulic systems and associated equipment * Feed and discharge conveyors * Electrical control panels and operator controls * Safety/emergency-stop systems * Material handling and associated ducting/extraction equipment * Complete interconnected plant infrastructure as shown in photographs The machinery has all paperwork from new and installation. Low hours. All services completed and Documented. Ideal for: Waste paper and cardboard recycling • Material recovery facilities • Recycling companies • Waste processing operations • Industrial baling and shredding applications Sold as a complete plant/package.

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails Todechuvropfx Amroc + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Year of construction: 2010, condition: used, Precise fill level control for detecting underfilling and overfilling of bottles. P max: 10 bar Tedpfxjztzcdo Amrsc Current: 8 A Voltage: 230 V Frequency: 50 / 60 Hz Length: 1,2 m Width: 0,93 m Height: 2,2 m Weight: 350 kg Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table

Condition: used, Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, rotor length: 2,200 mm, rotational speed (min.): 58 rpm, overall weight: 30,000 kg, power: 220 kW (299.12 HP), input voltage: 400 V, Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without massive disruptive substances. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Lindner Jupiter 2200 Drive power: 2x 110 kW (ABB) Screen basket cassette: 148 mm Control cabinet: complete with (FU-ABB) Recooler: Yes, included Working opening: 2190 x 1750 mm Filling volume: approx. 5 m³ Rotor length: 2190 mm Rotor circle diameter: 745 mm Rotor speed: 50 Hz: 58 rpm Todpfx Asw Tk E Asmrsc Number of rotor knives: 24 pieces Knife size, pointed knife: 145x145x47 mm Counter knife below: 6 pieces Scraper comb above: 6 pieces Hydraulic feed: 11 kW Weight: approx. 30 t Dimensions LxWxH mm: 5300 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics Tjdpfx Amox Af Rdersc - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: Tedpfx Aovn D I Njmrjc +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 400 mm, number of blades: 45, rotor length: 1,000 mm, power: 45 kW (61.18 HP), rotational speed (max.): 80 rpm, Genox V1000 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 45kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 1000mm wide x 400mm diameter Rotor with 45pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Tsdpjz Hyu Aefx Amrjc Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 1,500 mm, power: 110 kW (149.56 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, warranty duration: 12 months, Genox K1500 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 110kW Drive motor (90kW & 150kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 1500mm wide x 480mm diameter Rotor with 88pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Todpfx Aez Hyu Nsmrec Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 2,000 mm, power: 150 kW (203.94 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, warranty duration: 12 months, Genox K2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. Twin 75kW drive motors (2 x 55kW & 2 x 110kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. Tedez Hyxnspfx Amrjc