Used Llc Evolutioner Dura Fence Metal Machine Mpf-1 Auto for sale (113,712)

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. Iodetp H Eropfx Akxsar The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Iodeuzv Tzjpfx Akxjar Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Iedom Twnlepfx Akxear Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: new, Year of construction: 2025, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: Iaedpfen Hqmmex Akxjr As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. We use special tool steel to make rolls of machine so can provide longtime living period. Iasdperklxvsfx Akxer Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15 Iodpewwip Aefx Akxoar

Condition: new, Year of construction: 2025, NEW Snap lock roofing panel roll forming machine SL-1 Snap lock roofing panel roll forming machine SL-1 is designed and manufactured by our company as one of the flagman equipment for metal roofing panels production. Following machine makes standing seam roofing panels with self-closing lock on sides (snap lock). The main advantage of such lock system is the easy way of installation: to connect two panels with each other you just need to cover bottom part with top part and press it with some force, you will hear specific click noise at this very moment. That is why name of system is self-closing lock one. Comparing to standard standing seam roofing panels with mechanical lock which you need to close with special tools or equipment, snap lock panels are much easier to install and don’t require additional expensive devices for work. To fix panels at the roof frame you can use standard self-tapping screws, to make it possible, while rolling machine makes special fixation holes on one side of roofing panels. Such simple product design also helps to save costs and make installation process easier, not spending money on clips purchasing, comparing to the standard standing seam metal roofing with mechanical lock installation. So standing seam roofing with snap lock is easier to install, does not require high skilled employees and cut expenses for additional machines purchases. Total high of panels - 31mm As per order, we can also make machine for 26mm panels high. Machine has 10 pairs of forming rolls. One of the rolls has special punching parts so can cut fixation holes at roofing panel for further installation operations. Cutting tools are made from tools steel with heating and polishing, so have longtime working period. Maximum metal width can be 700mm, minimum 250mm. Snap lock roofing panel roll forming machine SL-1 is width easy adjustable one, so to adjust machine from one panel width to another you just need to rotate special handle. Rolling length – unlimited Rolling speed (m/min.): about 7 As extra options, you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; Iaedpeiuz T Iofx Akxjr As per customer preferences snap lock roll forming machine can be equipped with automatization system and electric shears for panels cutting. Standard supply set of self-closing lock roll former machine SL-1 includes safety covers to protect working parts of machine from foreign objects. Snap lock machine can work with various types of metal: galvanized steel, copper, aluminum, color coated metal, etc.

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Ijdpof Eywwsfx Akxoar Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. Ijdpfjv T Uvzjx Akxear You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Manual bending machine 3150x0.7mm This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. Iodpfoxghngjx Akxsar To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Iasdjlwt Adopfx Akxor Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine"s fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. To improve the production process we offer the window drip cap roll forming machine PO-1. This machine rolls the window trim profile on both sides simultaneously in a single operation. The rolling speed is 10 m/min. The machine is equipped with 7 pairs of forming rolls. The minimum width of window trim is 120 mm when rolling on both sides at the same time and the maximum width is 610 mm. To change the width of the window trim, simply use the adjusting handle, which makes it very easy to adjust the machine to go from one trim width to the next. Thus, the adjustment process is not time-consuming. It’s also possible to roll the window drip cap on the machine in two steps.

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. Iasdpfoh Aw Rnex Akxor For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Iedpfxjq U N T Rs Akxear Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. Iajdpohz Twwsfx Akxer You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: new, Year of construction: 2025, Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems. Main Technical Data: Size: 1600x850x1000mm Weight: 250 kg Motor Power: 1.5kw Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz Forming Steps: 6 steps Forming Steel Thickness: 0.4-0.7mm Forming Aluminum Thickness: 0.7-1.0mm Height of Roofing: 25mm Material Width: 250-700mm Tolerance: +-1mm Roller material: high grade 45# Material of principal axes: high grade 45# steel For this price we offer roll former roofing machine F3 +cross cutting knife +rolls for ribbed panels also you can get: - Rolls for ribbed panels Iodpfxsf Ih Hco Akxsar - Floor decoiler - Hand seamers - Electric seaming machine -Punching press for clips Dimension: 160.00Sm x 85.00Sm x 100.00Sm Weight: 280.00Kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 2,000 kg, input voltage: 380 V, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: cooling unit, All New Full Cover Fiber Laser Cutting Machine | GS-CE PRO Series | 6000-40000W MACHINE AVAILABLE ON HAND This GS-CE series FULL COVER FIBER LASER CUTTING MACHINE offers maximum safety for metals cutting. Thanks to its full cover structure and protective glass observation window, you can observe the operation and avoid hazards such as laser radiation, sparks, etc. It also has a fast exchange table, and the exchange is within 10s. It will be your ideal solution for safe and efficient metal cutting! Working platform size: 4000mm*2000mm Laser power 6KW-40KW GS-4020CE PRO Intelligent anti-collision function Automatic lubrication Laser fault alarm Cooling fault alarm Laser protection glass Water cooler TÜV CE certificate Optional function: automatic loading and unloading system Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming Ijdev Hnl Aepfx Akxjar System complete incl. cooler, extraction system and safety light barriers

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. Iedsxdmgvopfx Akxoar It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, Year of construction: 2023, Cut-to-length line 1250mm x2mm x10 t for cross cutting of coil metal with maximum width 1250mm, maximum metal thickness 2mm and maximum coil weight 10 tons. Line can be equipped with acceptance part with moving support for stainless steel or as standard acceptance table. Ijdpfeqlbpgsx Akxsar As an option we can offer used machines for your requirements. Also we produce slitting lines, roll forming lines. tube mills and other sheet metal and coil metal processing machinery

Year of construction: 2023, condition: new, We offer brand new roll former automatic line for corrugated metal sheet production. Depends on customer preferences we can produce line for 10, 20, 35, 44 or 57mm profile high. Iedpfxskhaadj Akxoar Some of lines we have ready on stock. Line is equipped with electric uncoiler up to 10t coils, roll forming part, cutting shear, sheet stacker for 10m length. Also we produce customized roll forming lines, metal tile lines, cut-to-length lines, slitting lines etc. To get more information about our machinery please contact our sales department

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Isdpfx Aoqxandskxjar Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Condition: new, Year of construction: 2025, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. Iasdpfjv Tyr Iox Akxor As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. So it lets the opportunity to bend thick metal in any part of bending machine without any damage. We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Material Material width (mm) 2020 The material thickness (mm) 1.2

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Iaedpfx Akowz Ukyexer Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 40,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: exchange table, fully protected exchange table, ultra-high power, dual platform Iasdpowxam Iofx Akxer Laser power: 12KW15KW, 20KW, 30KW, 40KW, 3KW.6KW Standard hardware: scrap car, fire brick, fully automatic butter filling, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, rear camera, internal camera, monitoring display, radiation-proof glass, top cover beam light curtain, partition dust removal Optional hardware: light-blocking rubber strip, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, top cover fan Optional functions: FDA configuration, CSA configuration, TUV configuration, conventional CE configuration

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Iajdpfx Ajywdqhekxor Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 8.2 kW (11.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 99 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 32x2mm Fully Automatic Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Iaedpfxovwg Hme Akxsr Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 10-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.