Used Leutenegger Und Frei Gsm Small for sale (9,208)

Year of construction: 2016, condition: used, Four identical retarder prover chambers for bakery applications are offered. Equipped with a shared control cabinet. Inspection possible by arrangement. Njdpfez Irlvsx Ag Iswn

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Turning data Turning length: approx. 700 mm Center height above bed: 160 mm Turning diameter above bed: 320 mm Center height above carriage: 100 mm Nodj Ad E Suspfx Ag Iswn Turning diameter above carriage: 200 mm Spindle bore: approx. 36 mm MACHINE DETAILS Manufacturer: Hahn und Kolb Machine type: Lead screw and feed screw lathe Length: 1,800 mm Width: 500 mm Height: 1,500 mm Weight: 1,000 kg

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 Nwjdpezt Ai Eofx Ag Ien in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation Nsdpfxou U Ad Rs Ag Iewn 600kg/h 15g/liter electric power 22KW EPS bead storage 300 m3

Condition: used, Year of construction: 1970, Additional title: Vertical tank Capacity: 5244 l Max. allowable operating pressure: 5 bar Nedpfx Asztzdbjg Iown Operating temperature: 20 °C Width: approx. 1600 mm Height: approx. 3200 mm Material: Stainless steel 1.4541 Position: vertical Base construction: 3 x feet Features: Manway; safety valve; CIP piping

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3795, Equipment: clamp, Theisen & Bonitz TB Flex 304 QSM for brochure production, equipped with a stapling unit and three-side trimming. Further technical specifications will be added. Nwjdpfxo Adtc Uj Ag Ijn

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly all bearings and guides are in good condition Nwedpfx Aj Afaugeg Isn year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3987, Theisen & Bonitz 315 VP assembly machine, fully functional and from current production. Further technical specifications will follow. Nedps Abtdmjfx Ag Iown

Condition: used, functionality: unexamined, Our company is offering an automatic packaging and feeding machine from Mengozzi (Mingozzi Packaging Team) for sale from company inventory. The machine is part of an industrial packaging line and is equipped with an indexing rotary table with mechanical feeding and positioning units. It is typically used for separating, feeding, and positioning products for downstream packaging processes (e.g., trays, blisters, or cartons). Features / Specifications: - Rotary table/indexing machine - Mechanical gripper and guiding units Nwedpfx Asy Enlxeg Ion - Product feed via hopper - Fully enclosed safety housing - Industrial-grade construction Condition: - Pre-owned unit - Out of operation for an extended period - Functionality not tested - Completeness cannot be guaranteed - Sold as-is / as inspected Note: Due to its specific design, the machine is particularly suitable for specialist companies for overhaul, adaptation, or parts recovery. Sales conditions: Company sale – without warranty, guarantee or return Sold EXW (Ex Works), collection by buyer

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Nwsdpfxsz Ixc Is Ag Ion

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. Nwodpfx Agsz D Evyj Ien The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Year of construction: 2020, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 19/00XXX, Probat G45 Retro / Kirsch & Mausser Professional Coffee Roasting System – Complete System (Like New, 1,000 Hours) Price: 119,000 EUR net, plus VAT. Condition & History: • Operating hours: approx. 1,000 hours (like new, excellent condition). • Design: G45 Retro system, newly built by Kirsch & Mausser in 2019/2020, featuring a cast-iron design with complete, modern peripherals. • Availability: Immediately available for pick-up. Equipment (6 items included): Item 1: Probat G45 Retro Roasting Machine • Batch size: 25 - 55 kg • Gas type: Natural gas or propane (230/400 V, 50 Hz) • Separate drives for roasting drum, agitator in the cooler, and cooling fan (simultaneous roasting and cooling possible). • Closed housing with large maintenance openings, manual handwheel for airflow regulation (drum interior/jacket, aroma, external). • Cooling sieve with a second outlet, roasting fans directly on the machine, large cyclone with chaff collection container, and connection for manual fire suppression water supply. • Atmospheric burner with increased output (145 kW), continuously adjustable via potentiometer on the control panel, including all safety and monitoring devices (solenoid valves, flame and gas pressure monitoring, pressure regulator). • Complete thermocouple equipment (product, roasting air, roasting exhaust air, hot air supply in the rear wall) with separate connections for temperature recording systems (e.g., Cropster). • Manual control on the control panel with digital display for temperatures and roasting times, as well as a frequency converter for the roasting fan. Item 2: Frequency Converter for Drum Operation • Continuous adjustment of the roasting drum speed (manually or via recipe). • Individual speed monitors and live display on the touch panel. Item 3: Semi-Automatic Control with Touch Panel Nedpfx Agsz Eah Hs Ijwn • Freely positionable control panel with touch panel. • Readability and automatic regulation of intake air temperature and roasting fan performance via recipes. • Parameter changes can be made at any time during the ongoing roasting process. • Additional potentiometers for independent regulation of the burner, roasting fan, and cooling fan. • Pneumatic actuation of the green coffee feed and the discharge flap in the drum lid. Item 4: Green Coffee Transport • Hopper for up to 60 kg of green coffee. • Conveying fan, conveying pipe with bends and clamps, and enclosed machine hopper. Item 5: High-Suction De-stoner • Hopper at the cooling sieve outlet, riser pipe with sight glass. • Collection container with impact apron to prevent coffee bean breakage, connected to the cooling fan. • Air inlet flap for regulating the rise speed, manual slide valve at the outlet. • Frequency converter for the de-stoner fan with potentiometer on the frame. Item 6: Vacuum Measurement Drum • Pressure sensor in the pipeline between the roaster and the system with direct display on the touch panel. Terms & Conditions: • Location: Luxembourg. • Communication: Please submit inquiries exclusively in writing via the platform/email. No telephone contact. • Legal: Commercial B2B sale with exclusion of all warranties, liability for defects, and right of withdrawal. The system is sold in its current condition. Dismantling and transport are the responsibility of the buyer.

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Loading bunker Oversize vibrating screen Njdpfx Agexa Drho Iown Chain conveyor to dryer Belt dryer Chain conveyors from dryer Vibration separator

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Njdpez Rn Dnjfx Ag Iown

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS WINCH Winch diameter: approx. 500 mm MACHINE DETAILS MANUFACTURER Brand: Frei MACHINE DIMENSIONS Length: 5,000 mm Width: 2,000 mm Nsdpfo Advflex Ag Iewn Height: 2,200 mm WEIGHT Machine weight: 4,000 kg

Condition: used, Year of construction: 2020, Offered for sale is an electric tempering oven with a maximum operating temperature of 250°C. Approx. dimensions X/Y/Z: 3000mm/2200mm/2500mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Nwedpjz Rn Duofx Ag Ijn

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications Njdpfx Aoz I Eggsg Iown drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: used, Year of construction: 2022, Offered for sale is an electric tempering oven with a maximum operating temperature of 100°C. Approx. dimensions X/Y/Z: 1800mm/1800mm/1600mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Nwjdpfx Aoz Rn Dzjg Ion

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: K 300712/595, overall weight: 2,900 kg, total width: 125 mm, total length: 330 mm, total height: 225 mm, Nwedpfsz Dcaijx Ag Ijn

Condition: refurbished (used), 100% REVISED IN 2025 PROCESSING CENTRE FOR DEBURRING & CLEANING OF SHORT TUBE RSA RASAPLAN NV & RASACLEAN SK Scope of supply: 1. RSA automatic loading system for short pieces 2. Deburring system RASAPLAN N00; 3. RSA cleaning system RASACLEAN SK for short pieces Complete line RSA for short size/diameter tube with loading , deburring, washing. Thickness: 3 mm Nwodpfx Ajymarfeg Isn Pieces length / fixed lengths: 40 – 120 mm Length tolerance: 0,5 mm Deburring system: RASAPLAN NK V 500

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: K 220808/309b, overall weight: 2,850 kg, total width: 125 mm, total length: 330 mm, total height: 125 mm, Nedpfez Db Tuox Ag Iown

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 00073068, roll pitch: 62 mm, total width: 692 mm, total height: 800 mm, total length: 25,000 mm, conveying length: 25,000 mm, working width: 600 mm, frame height: 800 mm, track width: 600 mm, For sale is a professional, motor-driven roller conveyor manufactured by AMI Förder- und Lagertechnik, built in 2021. Technical specifications: • Overall length: 25,000 mm • Conveyor height: 800 mm Njdpfjz Rv S Hsx Ag Iewn • Conveyor width: 600 mm • Color: RAL 5010 Blue • Without side guides • Includes discharge section of 3,000 mm • With roller stop • Two-sided emergency stop pull cords Photoelectric sensor control: • 1 photoelectric sensor at the end of the powered section (after 22,000 mm / beginning of discharge section) → stops the conveyor system when occupied • 1 photoelectric sensor at the end of the discharge section (mounted under the discharge section, facing upwards, fan-shaped beam) → starts the conveyor system when released (adjustable response time) Process: Boxes are placed along the entire powered section and transported to the pick-up position. The control system prevents the discharge section from becoming overcrowded and automatically restarts when a box is removed. Electrical equipment (complete scope of supply): • 1 motor drive controller • 1 control cabinet with main operating elements on the door • 1 Siemens PLC controller • 2 photoelectric sensors • 2 emergency stop pull cords Sales information: • Delivery and collection possible by arrangement The system was built in 2021 and features a complete, professional control system (Siemens PLC + photoelectric sensor control). Ideal for the transport of boxes/containers in logistics, production, or shipping.

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Nedjzl Rqhopfx Ag Iewn Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Nwsdpszdc D Sefx Ag Ijn Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. Nwsdpfx Asyr H Ansg Ien The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality: