Used Krauss Maffei Km 320-2000 Pa Cn for sale (23,803)

Condition: like new (used), Year of construction: 2025, KraussMaffei Injection Moulding Machine KM 320-2000 PA CN Year of manufacture: 2025 Machine equipped with a five-point, double toggle lever clamping unit (three-platen system) with a servo-electric drive. Injection unit with servo-electric drive for injection, plasticizing, and aggregate movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing system Complete system for thermoplastics. Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Gbodsyft Nzspfx An Rsl Clamping force: 3,200 kN Mold opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar spacing (H × V): 820 × 770 mm Mold opening stroke: 650 mm Mold height (min.–max.): 300–700 mm Daylight: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Shot volume: 1,078 cm³ Shot weight: 981 g Injection speed: 160 mm/s Injection rate: 616 cm³/s Screw speed: 191 rpm Plasticizing rate: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Installed heater capacity: 29.2 kW Number of heating zones (cylinder): 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight incl. control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Machine in modern servo-electric configuration, ensuring high precision, energy efficiency, and process repeatability.

Condition: excellent (used), Year of construction: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Data Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine Number: 61030600 Year of Manufacture: 2018 Control System: MC6 Control Panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and the advanced MC6 control system. Plasticizing Unit Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Nozzle type: Open Nozzle radius: 15 mm Gbjdoyugkwspfx An Rel Nozzle orifice: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen size (H x V): 1270 × 1230 mm Tie bar clearance (H x V): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward/backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection flow rate: 368 cm³/s Screw rotation speed: 285 rpm Plasticizing rate: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Installed heater capacity: 29 kW Number of cylinder heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with an ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency converter, adjusting the motor speed to the actual demand during the production cycle. Key Benefits: - Reduction of electricity consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven industrial technology - Reduction of energy losses during idle runs - Lower heating of hydraulic system - Extended life of hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Gsdpsy Hqwyefx An Rjbl Clamping force [kN]: 13,000 Platen dimensions (hxw) [mm]: 2210 x 1910 Clearance between tie bars (hxw) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Maximum ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight in PS [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heater power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Core pull: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow-off valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Condition: excellent (used), Year of construction: 2008, KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: color monitor integrated with the control console Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for processing thermoplastics, featuring abrasion protection. Clamping Unit Clamping force: 11,000 kN Mold opening force: 770 kN Platen dimensions (horizontal × vertical): 2,210 × 1,910 mm Tie bar spacing (horizontal × vertical): 1,550 × 1,250 mm Mold opening stroke: 2,000 mm Minimum mold height: 600 mm Maximum mold height: 1,200 mm Platen opening stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1,758 bar Injection volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Gbjdpfx Asyugfzsn Rjl Injection rate (accumulator): 1,696 cm³/s Electrical-Hydraulic Equipment Rated drive motor power: 132 kW Installed heating capacity: 82 kW Number of barrel heating zones: 7 Dry cycle rate (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2,440 l Machine Dimensions & Weight Net weight (with control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection molding machines. The system controls the hydraulic pump motor via a frequency inverter, adjusting the motor speed to the current production cycle requirements. Key Benefits: - Reduction in electricity consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Less heating of the hydraulic system - Increased longevity of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection molding machines The ESS system allows for a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Gbjdpfxeyrrwks An Rsl Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m

Condition: used, Year of construction: 2023, operating hours: 22 h, functionality: fully functional, machine/vehicle number: 61035145, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 393 cm³, injection pressure: 2,429 bar, injection weight: 140 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 120 mm, opening stroke: 950 mm, installation height: 450 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 6,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you here our certified and highly flexible stock machines: The base model injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, user-friendly operation, and short lead times. It is suitable for a wide range of applications, including packaging, electrical and electronics industries, medical technology, and automotive manufacturing. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Meeting demanding delivery schedules with a base machine concept offering a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM ▪ MC P1 with 15" TFT colour screen and multitouch functionality Gedpfx Ansy Rmwdj Robl CLAMPING UNIT ▪ Clamping force: 1,200 kN ▪ Maximum mould opening force: 180 kN ▪ Clear space (h x v): 520 x 470 mm ▪ Mounting platen (h x v): 690 x 640 mm ▪ Mould installation height min. - max.: 180 - 450 mm ▪ Maximum opening stroke: 850 mm ▪ Maximum mould opening path: 450 mm ▪ Ejector drive: electric ▪ Ejector stroke: 120 mm ▪ Ejector force forward/backward: 27 / 33 kN ▪ Ejector speed forward/backward: 300 / 300 mm/s ▪ Maximum mould weight: 850 kg INJECTION UNIT ▪ Screw diameter / type: 35 mm / standard ▪ Effective L/D ratio: 22.9 ▪ Injection pressure: 2,429 bar ▪ Stroke volume: 154 cm³ ▪ Shot weight at max. stroke (for PS): 140 g ▪ Injection speed: 200 mm/s ▪ Injection flow rate: 192 cm³/s ▪ Screw drive / rotation speed: 374 rpm ▪ Plasticising rate (standard screw): 18.9 g/s ▪ Nozzle contact force: 34 kN ELECTRICAL PARAMETERS ▪ Connected load: 22.7 kW ▪ Installed heating power: 11.5 kW ▪ Power supply: 200 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS ▪ Net weight with control cabinet: 6.7 t ▪ Length x width x height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT ▪ Wear-resistant plasticising unit ▪ BluePower full insulation for plasticising cylinder ▪ Open nozzle ▪ Air valve, single (BWAP) ▪ Pneumatic hot runner shut-off control, single ▪ Electrical interface for pneumatic cascade, 4-fold ▪ Euromap interface for handling: E18 + E67 ▪ Euromap central computer interface: E67, E77 ▪ Water manifold, 4-fold ▪ Electrical provisions for hydraulic auxiliary unit ▪ Automatic central lubrication ▪ Adaptive Process Control (APC) ▪ Injection-compression moulding mode ▪ Graphic analysis package ▪ Swivelling injection unit The machine is located at our Parsdorf facility and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Gedpfx Anoy Dqiwj Rebl Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Technical Details 75mm screw Injection pressure: 1635 bar Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Godpfx Aowq D Efjn Rebl Minimum mold thickness: 380 mm Opening stroke: 1020 mm Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036679, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options Gbjdpjyzz Irofx An Rol TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 Gedpsud H Dmsfx An Rsbl ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT Godpjuggb Dofx An Robl  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ Gjdpfx Aew U N Ixsn Rjbl - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 66,160 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 679 cm³, Injection unit: Screw diameter 60 mm Ls/D ratio 21 Injection pressure 2000 bar Stroke volume 679 ccm Shot weight (PS) 618 gr. Injection rate 325 ccm/s Screw speed 259 1/min Plasticising rate max. 58 g/s Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 12500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - 10-fold water flow regulator Additional Options: - 1 x Air valve - 3 x Core pulls - 4 x hotrunner controllers Gbedpfx Aey Nk Uqjn Rol - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 2002, Krauss Maffei KM 420-2700 C2 Injection Moulding Machine Basic Data • Manufacturer: Krauss Maffei • Model: KM 420-2700 C2 • Year of manufacture: 2002 • Serial number: 424227 Clamping Unit • Clamping force: 4200 kN (420 tons) • Mounting platen dimensions (HxV): 1270 x 1200 mm • Tie bar clearance (HxV): 800 x 800 mm • Min. mould height: 380 mm • Max. mould height: 1020 mm • Maximum opening stroke: 1400 mm Injection Unit • Screw diameter: 80 mm • Injection volume: 1433 cm³ • Shot weight: 1304 g (PS) • Maximum injection pressure: 1829 bar Gbodpfx Ajy I Tq Ejn Rsl • Maximum temperature: 375°C Electrical and Hydraulic System • Power supply: 400 V • Phases: 3~ • Frequency: 50 Hz • Total current consumption: 237 A • Fuse protection: 250 A • Pump motor power: 75 kW • Heater power: 36 kW Dimensions and Weight • Machine weight: approx. 22,000 kg • Dimensions (L x W x H): 7.06 x 2.33 x 2.51 m

Condition: good (used), Year of construction: 2014, MC6 controll panel Blue power Clamping force: 1150 t Tie bar distance HxV: 1580x1280 mm Screw diameter: 90 mm Shot weight: 2084 g Gbodpfx Ajy Epp Aon Rsl Shot volume: 2290 cm3 Type: Horizontal Drive: Hydraulic

Condition: like new (used), Year of construction: 2014, operating hours: 35,000 h, functionality: fully functional, Krauss-Maffei KM 1150/4300 MX Horizontal injection moulding machine by Krauss-Maffei with 1,150 tonnes of clamping force. Year of manufacture: 2014. Operating hours: 35,640. MC6 control system. Extras: ABB 6-axis robot, 24 hot runner zones, 10 pneumatic + 10 hydraulic sequential controllers. Can be shown in production. Technical Details CLAMPING FORCE: 11,500 kN OPERATING HOURS: 35,600 SCREW DIAMETER: 90 mm INJECTION PRESSURE: 1,839 BAR INJECTION VOLUME: 2,290 cm³ INJECTION WEIGHT: 2,084 g OPENING STROKE: 2,000 mm PLATEN DIMENSIONS: 2,210 x 1,910 mm MINIMUM MOULD THICKNESS: 600/1200 mm Gbodey Efkropfx An Rsl YEAR OF MANUFACTURE: 2014

Condition: ready for operation (used), Year of construction: 2003, clamping force: 3,500 kN, screw diameter: 70 mm, injection weight: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 1097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C • Mold opening force: 220 kN • Travel force (moving plate): opening 105 kN / closing 95 kN • Max. opening stroke: 920 mm • Min. mold height: 380 mm • Max. daylight: 1300 mm • Size of mold platens (H x V): 1060 x 1095 mm • Distance between tie bars (H x V): 710 x 710 mm • Ejector stroke: 250 mm Gedpfx Aneyyxmvs Rjbl • Ejector force (forward/backward): 95 / 49 kN • Max. mold weight: 4950 kg Additional equipment • Handling system: Wittmann with the following robot travel (X/Y/Z): 420 / 1200 / 2000 mm

Condition: ready for operation (used), Year of construction: 2007, clamping force: 8,000 kN, screw diameter: 85 mm, injection weight: 2,452 g, This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection unit: 6100 • Injection volume: 2695 cm³ • Injection pressure: 2242 bar • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450°C • Availability: Early 2027 Additional equipment • Handling: Wittmann robot system • Model: W743 Gedoyyxc Dspfx An Rsbl • Power: 400 V, 18 A / 12.5 kVA • Axes travel: X 1200 mm, Y 2000 mm, Z 4000 mm

Condition: excellent (used), Year of construction: 2004, Krauss Maffei Injection Moulding Machine KM 350–2700 C2+ Gsdsyv E Nvopfx An Robl 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: hydraulic injection moulding machine Control: MC4 (colour monitor, integrated control panel, disk drive station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Platen movement force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticizing System: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank capacity: 720 l 👉 The machine is an excellent candidate for ESS retrofitting (energy savings of up to 30–60%) 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 160–1000 CX Injection Moulding Machine 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 160–1000 CX Year of Manufacture: 2012 Operating Hours: 57,654 hours Category: Hydraulic Injection Moulding Machine 🔧 Clamping Unit Clamping Force: 1,600 kN (160 tons) Platen Dimensions: 820 × 845 mm Tie-bar Distance: 520 × 520 mm Minimum Mold Height: 300 mm Maximum Opening Stroke: 950 mm 💉 Injection Unit Screw Diameter: 50 mm Injection Volume: 432 cm³ Shot Weight: 393 g Injection Pressure: 2,304 bar ⚡ Electro-hydraulic System Pump Motor Power: 37 kW Heater Power: 18.7 kW 👉 Option to install Energy Saving System (ESS) – actual energy consumption reduction by up to 30–60% Gbsdpfoyv E E Dox An Rol 📐 Dimensions & Weight Machine Weight: 9 tons Dimensions (L × W × H): 5.54 × 2.06 × 2.18 m

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes Gbjdpoxqh I Iefx An Rjl

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 420-3000 CX Injection Moulding Machine Year of manufacture: 2011 Control system: MC5 Clamping Unit: Clamping force: 4,200 kN Tie bar spacing (H x V): 900 x 800 mm Platen dimensions (H x V): 1,400 x 1,250 mm Min. mould height: 780 mm Max. daylight between platens: 1,400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6,700 kg Injection Unit: Screw diameter: 80 mm Injection pressure: 1,856 bar Shot volume: 1,608 cm³ Shot weight (PS): 1,464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional Equipment: Godpfsydbbvox An Rjbl 2 x hydraulic nozzle controls (GK) 2 x hydraulic core pulls – moving platen 1 x hydraulic core pull – fixed platen Masterbatch dosing unit control 14 GK zones Electrical and General Data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1,075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar Gjdpfx Asy Aktmsn Rebl equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector • Side air valve Gbodpfxeyaizvj An Rel • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Condition: good (used), Year of construction: 2013, clamping force: 16,000 kN, Equipment: documentation/manual, Clamping force: 1600 t Screw diameter: 135 mm Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Gedpfxjyh I Emo An Rjbl Shot volume: 9662 cm3 Type: Horizontal Drive: Hydraulic