Used Kramer Am-Aut Ii 2000/2,25 for sale (19,192)

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm Gedpfxsvaatfj Akyokc with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Year of construction: 1972, condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm Godsy Np Ajpfx Akyokc clamping bar drive: 1,1 kW below cheek drive: 3 kW rear stop: ja mm weight: 2200 kg space needed: 800x3000x1380 mm

Condition: ready for operation (used), max. working width: 2040 mm for metal sheets up to: 2 mm opening width top clamping bar: 90 mm adjustment bending cheek: 90 mm clamping bar drive: 1,5 kW below cheek drive: 4 kW electrical connection: 380 V kW weight: 2600 kg space needed: 3050 x 800 x 1350 mm Gedpfx Ajd Rbz Tekyjkc

Condition: good (used), Year of construction: 1988, machine/vehicle number: 47800, Offer 26308 Technical specifications: - Maximum working width: 3040 mm - Maximum material thickness at 40 kp/mm² tensile strength: 2 mm - Electronic adjustment of bending angle: 0 - 180° - Automatic sequential control for a complete working process - Maximum upper die setting: 250 mm - Maximum opening width/stroke of the upper die: 350 mm - Height adjustment: - Upper die: 30 mm - Lower die: 90 mm - Upper die drive: 400 V / 1.5 kW - Lower die drive: 400 V / 4.0 kW - Space requirement: approx. W 4450 x H 1650 x D 2100 mm Godpfxoz Ndu Se Akyjkc - Weight: approx. 3900 kg - Includes: - Point rail + lower die rail - E-foot switch

Condition: used, functionality: fully functional, Year of construction: 1981, Motorized Swivel Bending Machine Manufacturer: KRAMER, Type: AMaut III 3000 x 2 mm Completely overhauled in 1981 Technical Data Manufacturer: KRAMER Type: AMaut III 3000 Year of Manufacture: Completely overhauled in 1981 Usable Length: 3000 mm Sheet Thickness: 2 mm Stroke: Dimensions: approx. L x W x H 4.2 x 0.90 x 1.5 m Equipment • Bending angle adjustment via potentiometer! Gksdpfx Aksz Eg Aqjyoc • Manually adjustable crowning • Documentation All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Manufacturer’s serial number: 48 287, year of manufacture: 1990 Useful length: 1060 mm Maximum sheet thickness: 3.75 mm Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Gkedpfxofnabye Akysc Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Mains connection: 400 volts, 50 Hz - Manual and semi-automatic control - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Condition: used, Year of construction: 2012, operating hours: 3,652 h, Equipment: ABS, all wheel drive, KRAMER ALL-WHEEL DRIVE 950 – DEUTZ ENGINE – HYDRAULIC QUICK COUPLER – PALLET FORK – 6,500 KG – ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * 3,652 OPERATING HOURS * 2012 YEAR OF MANUFACTURE * DEUTZ ENGINE * 58 KW Godpfx Akozzg Twsyokc * PERMISSIBLE TOTAL WEIGHT: 6,500 KG * PALLET FORK * HYDRAULIC QUICK COUPLER * TIRE SIZE: 14.5-20 * GOOD TIRES EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES, AND 17-21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors and prior sale! You can find more vehicles on our website: Sales are exclusively subject to our general terms and conditions – see website. Important note – important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Gsdpjyttv Refx Akyjkc

Condition: good (used), Year of construction: 2010, sheet width 2020 mm plate thickness 3.0 mm thickness at "Niro-steel" 2.0 mm bending angle max. 135 ° stroke of upper beam 250 mm Swing beam adjustment 80.0 mm Control POS 2000 back stop - adjustable ca. 1.000 mm total power requirement 6.0 kW weight of the machine ca. 3775 kg dimensions of the machine ca. 3850 x 2250 x 2250 mm Original price at the time: approx. 70.000 Machine from a maintenance workshop Special price upon request (!) Features: - Robust, electric-motor-driven CNC swivel bending machine - dynamic, high-performance drive motors - SCHRÃ?DER "POS 200" CNC control unit * touchscreen control panel * fast programming of individual parts * programming of bending sequences * Tool and bending program library * Graphical and numerical display - Swiveling control panel, front right - CNC electric-motor-driven material/backgauge * With rear sheet metal support surface (stainless steel) - CNC electric-motor-driven lower rail adjustment - 1x freely movable dual foot switch Gkedpfsz Icy Rox Akyjc - Bending/insert tools * 1x upper cutting rail * 1x lower bending rail -- 10 mm * 1x lower bending rail -- 25 mm - User manual (PDF)

Condition: used, sheet length: 1050width: 800heigth: 1400sheet thickness: 3 Bending Machine - Dimensions (L x W x H): approx. 210 cm x 80 cm x 140 cm - Working width: approx. 105 cm Gkodpfxsvaar Is Akyoc

Condition: used, empty load weight: 4,940 kg, maximum load weight: 13,060 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1994, loading space volume: 10 m³, suspension: steel, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), U-protection, side aluminum driving protection, rotating beacon, rear outlet Gedpfovhihbsx Akyjkc Superstructure: Müller tank superstructure type WM A 100 with 10,000 l tank capacity for transporting faeces 2x 9 t SAF axles, drum brakes! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), Year of construction: 1982, Hydraulic guillotine shear, manufacturer KRAMER, Model: TM 3 Hydr. 2000, Year of manufacture: 1982, in very good original condition. Cutting capacity: 2000 mm x 12 mm in steel. Equipped with hold-down device, angle stop, and manual back gauge up to 750 mm, machine feet, and machine documentation available. Very good condition. Machine dimensions: width 3100 mm, depth 2450 mm, height 2250 mm, weight approx. 5500 kg. Godpfx Ajy Siftokyskc

Condition: ready for operation (used), Year of construction: 2016, operating hours: 29,600 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 530 mm, displacement volume: 412 cm³, injection pressure: 1,820 bar, TECHNICAL DETAILS Clamping force: 2,000 kN Gjdpfx Akozavaljyekc Screw diameter: 50 mm Distance between columns: 530 mm Injection volume: 412 cm³ Injection pressure: 1,820 bar Shot weight: 375 g Mold height (min.): 200 mm Ejector force: 62,000 N Ejector stroke: 140 mm Opening stroke: 490 mm MACHINE DETAILS Control system: KEBA 1075 button control Installation height: 550 mm Dimensions & Weight Dimensions (L x W): 6,000 x 1,530 mm Total weight: 7,100 kg Heating power: 18 kW Pump power: 18,500 W Operating hours: 29,600 h EQUIPMENT Energy-saving servo-hydraulic system 2 x hydraulic core pull 2 x air valve Euromap 67 interface for robots Newly installed, hardened screw and cylinder unit with 50 mm screw

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Table size: 1800 mm Minimum diameter: 200 mm Maximum number of teeth: 45 Max. module: 20 Godpsylprfsfx Akyskc Weight: 40 tons

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm Gkjdexbtrtopfx Akyoc On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Condition: good (used), Autotherm ATK 2000 cooling system, 20.5 kW cooling unit in a 20-foot container. Technical data Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal power: 20.5 (31.5) kW Nominal current: 50 (71) A Supply line fuse: 80 A Mechanical data Gjdpouzhcujfx Akyokc Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Inlet: Flange SDIN2633 DIN100 PN16 Outlet: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2" internal thread Well water inlet: 2" internal thread Well water outlet: 2" internal thread Adiabatic inlet: 3/4" internal thread Filling: manual 3/4" internal thread Water circuit Coolant: Water/glycol (90% / 10%) Flow pressure: max. 10.6 bar Tank volume: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 AFAE-EUUE Delivery pressure: ... 2.15 bar Delivery rate: 58 m³/h Consumer circuit Pump type: (Pressure boosting system) Grundfos Hydro 2000 ME 2 CRE 32-6 AFAE-EUUE Delivery pressure: max. 10.6 bar Delivery rate: max. 40 m³/h 20-foot container AIS-DSC-22-28 External dimensions mm (L x W x H): 6058 x 2438 x 2591 Internal dimensions mm (L x W x H): 5898 x 2352 x 2390 Usable area inside m²: 13.88 Compact control Compact Control 2000 ME. Compact microprocessor control for stepless and cascade control of pumps with MGE motors and integrated frequency converter for demand-based, energy-optimized operation of multi-pump systems. With automatic switching on and off of the individual speed-controlled pumps via a digital controller specially developed for centrifugal pumps. Grundfos R100 infrared handheld device and diagnostic unit: for commissioning, data monitoring, reading error messages and configuring Grundfos pumps. More items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Gkodpfxoww I Tms Akyoc

Condition: used, Second-hand automatic planing and grooving machine, part of a Weinig Hydromat 2000 pre-planing line, with feed mechanism (tilting destacking). The machine has already been dismantled and is ready for loading. The images contain AI-generated sample images for illustrative purposes. The illustration may contain errors. Technical data: - Spindles: 5 - Spindle 1: Bottom / 11 kW / 50 mm / 6,000 rpm Godpez Hy H Sofx Akyokc - Spindle 2: Left / 11 kW / 50 mm / 6,000 rpm / Jointer - Spindle 3: Top / 18.5 kW / 50 mm / 6,000 rpm / Jointer - Spindle 4: Bottom / 11 kW / 50 mm / 6,000 rpm / Jointer - Spindle 5: Right / 11 kW / 50 mm / 6,000 rpm - Working width: 175 mm - Working height: 80 mm - Feed: 15 kW / 100 m/min - Control: CNC memory system - Max. workpiece length: ~ 6,000 mm

Condition: used, Year of construction: 2006, turning diameter 540 mm turning length 1020 mm control FANUC 18 i-TB bar diameter 65 mm travel -x axis 555 / 185 mm travel -y axis 160 mm travel -z axis 1095 mm travel -z axis (sub spindle) 1065 mm spindle speed: 5000 / 5000 1/min spindle bore 76 / 76 mm C-Axis 360 x 0,001°/360 x 0,001° turret head BMT 65P / 12 Pos. Godpfx Aoz Ezrmskyekc milling spindle turning speeds 10000 U/min Driven Tools 4.000 U/min b-axis 240 ° rapid traverse X-axis 24 m/min rapid traverse Z-axis 24 m/min drive capacity - spindle motor 22 / 22 kW voltage 400 V toolpiece magazine: chain magazine 40 Pos. tool taper HSK-A 63 milling drive 15 kW driven Tools 5,5 kW total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 4,30 x 2,30 x 2,90 m

Condition: used, Year of construction: 1980, Hydraulic guillotine shears, Kramer type TM III HY 2500 Cutting capacity 2500 mm Cutting thickness 12 mm elketr. backgauge Cutting gap adjustment Godpfx Ajrfwyrskyekc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,500 rpm, position of the milling head: Testa ad assi ortogonali indexati - TTL2 25 360, spindle diameter: 180 mm, travel distance W-axis: 1,000 mm, table load: 100,000 kg, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, table length: 3,000 mm, table width: 3,500 mm, quill travel distance: 2,500 mm, quill diameter: 180 mm, spindle stroke: 1,000 mm, workpiece weight (max.): 100,000 kg, torque: 9,050 Nm, CNC BORING MACHINE PAMA mod. SPEEDRAM 2000 Hydrostatic CNC Control: Siemens Sinumerik 840D Axis X: 13,000 mm Axis Y: 5,000 mm Axis Z: 1,200 mm Axis W: 1,000 mm Total axial travel (Z+W): 2,200 mm Working feed on all axes: 8,000 mm/min Rapid traverse on all axes: 20,000 mm/min Spindle: Boring spindle diameter: 180 mm Spindle carrier ram dimensions: 400 x 440 mm Spindle speed (3 ranges) max: 2,500 rpm Spindle power (S1): 91 kW Spindle nominal torque (S1): 9,050 Nm Spindle internal taper: ISO 50 DIN 69871 AD-Type Big Plus Orthogonal axis indexed head – TTL2 25 360 Tool taper: ISO 50 DIN 69871/2 AD-Type Big Plus Max spindle power: 25 kW Max spindle speed: 2,500 rpm Gksdpfx Aksyxg Hbjyjc Speed ratio: 1:1 Spindle indexing: +/- 100°, 200 positions per 1° Head indexing: +/-180°, 360 positions per 1° Max spindle nominal torque: 1,000 Nm TH 100 rotary-travelling table: Table dimensions: 3,000 x 3,500 mm Table load capacity: 100 Ton Central T-slot size: 36h7 mm Lateral T-slot size: 36h12 mm T-slot pitch: 320 mm Longitudinal travel V-axis: 2,500 mm Feed/rapid traverse V-axis: 10,000 mm/min Chain-type tool magazine with 80 tools (capacity CU 145 R80) Machine weight approx. 160/165 Ton Complete with: - Hinged belt chip conveyor - No. 02 side chip conveyors for rotary table - Fixed closed accessory magazine with 2+1 positions - Fixed tool rack (ISO50, 6 positions) - Internal and external tool coolant system, 30 bar - Wireless workpiece probe (Renishaw) USED MACHINE YEAR: 2009

Condition: used, Year of construction: 2004, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, workpiece length (max.): 1,300 mm, edge thickness (max.): 20 mm, feed rate X-axis: 40 m/min, The machine has the following configuration: Gluing Gluing system: EVA Adhesive application: single-sided and double-sided Scoring saw Motor power: 2.2 kW Speed: 6,000 min⁻¹ Profiling unit Motor power: 6.6 kW Speed: 6,000 min⁻¹ Cross-cutting saw unit Number of motors: 2 Edge trimming unit, top and bottom Number of motors: 2 Motor power: 1.85 kW Speed: 12,000 min⁻¹ Edge rounding unit Number of motors: 2 Motor power: 1 kW Speed: 12,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Belt sanding unit Motor power: 2.2 kW Belt sanding unit Motor power: 0.75 kW Gkedpez Ekczefx Akyec Brushing unit Motor power: 0.75 kW Brushing unit TECHNICAL DETAILS Workpiece length: 280–1,300 mm Workpiece width: 320–2,800 mm Workpiece thickness: 8–60 mm Edge thickness: max. 20 mm Feed speed: max. 40 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Chain conveyor with drive shoes Pressure bar with rubber belt Edge heating lamps Roller magazine Hot-melt adhesive tank Hot-melt adhesive pre-melter Edge pressing unit with 9 pressing rollers CE-compliant The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Condition: used, Cutter knives for KRÄMER & GREBE 500l Cutter knives for 500L bowl For sale are 30 used cutter knives. These knives are suitable for 500 litre bowls and are ideal as spare parts or accessories for cutters in the meat processing industry or food production. The knives are made of stainless steel (unless otherwise stated). Quantity: 30 units Suitable for: 500 litre bowl Condition: Used, sold as seen. Price per unit: €175 Gkodpev H Thpofx Akysc

Condition: used, Year of construction: 2000, Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator. container content: 4000 l Flow rate max: approx. 360 l/min. Filter fineness:: greater than 0.003 mm Gjdpfov N Iuijx Akyekc Connected load approx.: 9.0 kW (400 V / 50 Hz) Dimensions W x D x H: 6000 x 1200 x 1650 mm Weight approx.: 2000 kg colour: light grey

Condition: like new (used), Year of construction: 2020, functionality: fully functional, GMP Roller Laminator EXCELAM-II 355 Q Working width 355 mm, hot lamination Laminator for hot lamination films from 32 - 175 microns Godozwwqlepfx Akyskc Infrared-heated silicone rollers, ensuring scratch-free lamination Equipped with an 8-bit microprocessor LCD display and electronic reverse function, standby function Temperature adjustable from 0-160 °C in 1°C increments Temperature and speed settings are pre-programmed for each film thickness The roller pressure can be precisely adjusted for each film thickness using a scale disc Max. passage height: 5 mm Adapter for 25 mm core diameter Working speed: 0-1.6 m/min, adjustable in 9 steps Connection: 220 V / 50 Hz / 1300 Watts Dimensions: W546 x D456 x H285 mm Weight: 25 kg