Used Khs Innopack Ca-1 Cardboard Erector (2006) for sale (83,013)

Condition: used, Year of construction: 2006, Overview This KHS Innopack CA-1, built in 2006, is a carton erector that forms cartons from flat blanks and closes their bottom with hot-melt glue. Blank stacks are fed on a roller conveyor into the magazine; suction grippers pick each blank, erect it, fold the inner bottom flaps, apply glue with a Robatech hot-melt unit, close and press the outer flaps and discharge the carton onto the outfeed roller conveyor. The machine is still installed in a wine bottling and packaging line and can be inspected on site. Technical data Todpfx Amsz Hcivjrjc - Manufacturer: KHS - Model: Innopack CA-1 - Year of manufacture: 2006 - Machine type: carton erector with bottom gluing - Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps - Power supply: 400 V, 3 Ph, 50 Hz, 15 A - Compressed air: min. 5 bar operating pressure - Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm - Blank infeed: roller conveyor with stainless steel rollers, roller width 1,000 mm, infeed clearance 800 x 450 mm - Outfeed: roller conveyor with stainless steel rollers, roller width 300 mm, 3,050 x 650 x 880 mm Equipment - Stack preparation with automatic loading of the blank magazine - Blank magazine with lifting device, side guides and front and rear stops - Pick-up and erecting stations with vacuum suction grippers and vacuum unit - Folding, gluing, closing and pressing devices for the carton bottom - Side and height adjustment by handwheel for different carton sizes - Enclosure with windowed safety doors - Operator panel with display, keypad, start/stop, key switch and emergency stop; operator texts in French - Control cabinet and pneumatic service unit - CE marked; operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack SP - Year of manufacture: 2006 - Machine type: pick-and-place case packer - Bottle infeed: 4 lanes, lane width 85 mm - Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles - Case clearance: 175 x 400 mm - Power supply packer: 400 V, 3 Ph, 50 Hz, 27 A - Robot controller: KUKA KR C2, 400 V, 3 Ph, 50/60 Hz, 8 A - Overall dimensions (L x W x H): 6,000 x 3,250 x 3,650 mm - Change-part trolleys: 4 units, each 2,050 x 1,300 x 2,100 mm Equipment - Base frame with lifting column, counterweight and lifting unit - Cross conveyor and shifting carriage for the gripper head - Gripper head with pneumatic bottle tulips - Centring device for the cases in the packing zone - Four-lane bottle infeed table with lane guides - Case infeed and outfeed conveyors - Enclosure with windowed doors and safety fencing - KUKA KR C2 controller cabinet and KCP teach pendant on stand Tsdpez Hbxijfx Amrsc - KHS control cabinet - 4 change-part trolleys with gripper heads for different bottle sizes - Operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C Todpfx Aoz Hckmjmroc - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2016, type of input current: three-phase, input voltage: 400 V, control voltage: 24 V, input current: 202 A, input frequency: 50 Hz, We offer this used KHS INNOPACK SP A-M Innopack Kisters SP Advanced shrink-wrapping machine, manufactured in 2016. Tjdpszdtr Sefx Amrjc Supply voltage: 400 V Frequency: 50 Hz Power supply type: 3/N/PE Rated current: 202 A Control voltage: 24 V DC Supply fuses: 250 A Short-circuit current: kA If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2009, A fully automatic rotary labeling machine Anker (KHS Group) is available. Labeling method: wet glue labels, bottle formats: 250ml/500ml/750ml, label dimensions 1 X/Y: 33mm/119mm, label dimensions 2 X/Y: 36mm/150mm, label dimensions 3 X/Y: 48mm/158mm, labeling capacity: 20000bottles/h. Including formats for wet glue and VE+RE. Documentation available. An on-site inspection is possible. Tedpjyv H Iyjfx Amrsc

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2006, Equipment: ABS, * JUNG 2-axle trailer Tsdpfxoxzm Izs Amrec * Model: CA 18H ?Apollo * For roll-off containers * VIN: W09CH22186HJ08303 * Permissible total weight: 18,000 kg * Permissible axle load axle 1: 9,000 kg * Permissible axle load axle 2: 9,000 kg * Axles: Mercedes * Brake system: EBS / ABS * Brakes: Disc brakes * Suspension: Air suspension front and rear * Overall width: 2,550 mm * Rims: Aluminium rims * Year of manufacture: 2006 * Price on request

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 678, functionality: fully functional, power: 1,400 kW (1,903.47 HP), input voltage: 380 V, input frequency: 5,060 Hz, type of input current: three-phase, table width: 400 mm, table length: 500 mm, total length: 1,700 mm, total width: 2,100 mm, total height: 1,500 mm, overall weight: 1,300 kg, Equipment: CE marking, safety light barrier, Transmatic CA 1000 – 6 Stations (late 2019 model) This is an automatic rotating carousel heat press in excellent condition – almost like new – with very few operating hours. The machine is fully operational and is still installed in our production line, maintained to professional factory standards. It offers high efficiency and productivity, capable of producing approximately 7,500 pieces per day with only 2 operators, making it ideal for companies focused on transfer printing and high-volume textile applications. Key Features: Tedszi Sm Sopfx Amrjc - Automatic 6-station rotating carousel system - Very low usage (limited production hours) - Plate dimensions (50cm x 40cm) - High production capacity (~7,500 pieces/day with 2 operators) - Precise control of temperature, pressure, and timing - Reliable and consistent output - No additional investment required – ready for immediate use.

Condition: used, KHS triblock filling line 45-80-10 - KHS bottle rinser, Innoclean FR-EM 45 - KHS volumetric filler, Innofill EV-VF 80 with ENDRESS+HAUSER DOSIMAG A flowmeters Tsdoychaiepfx Amroc - ALCOA KUPI 10/540 capper (max. 25,000 bph) Output: approx. 20,000 bph Control system: S-7 Year of manufacture: 1998 Complete machine documentation – several folders.

Condition: excellent (used), Endoline Carton Erector Model 221 With bottom taper Serial number: 051235542 Tedev Tywwspfx Amrec 415 V, 3 Ph, 50 Hz Dimensions carton erector: 1850 mm x 1850 mm x 2150 mm Including outfeed roller conveyor, roller width: 400 mm Dimensions roller conveyor: 1750 mm x 800 mm x 550 mm.

Condition: like new (used), TETRA PAK CARDBOARD PACKER CBP 32 VERSION 400 Tjdpsya I Sgsfx Amrec YOM 2010 2177 RUNNING HOURS ONLY!! MULTI PACKER FOR 200/250/1000 ml AS NEW CONDITION LOCATION - POLAND READY FOR SHIPPING

Condition: excellent (used), Year of construction: 2015, Ref:11123 . 2015 Loveshaw CF20-EC Carton Erector. Todszmx Haspfx Amrsc Automatic carton erector and bottom sealer. Features: Consistent seal quality Quick changeover Low tape alarm (option) Case on demand sensor Specification: Carton size range - L. 250-570 mm - W. 170-410 mm - H. 90-550 mm Magazine: Up to 100 cases Closure material: Pressure sensitive tape Speed: Up to 14 cases per minute.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2017-2034, type of input current: AC, input voltage: 230 V, type of cooling: air, electrical fuse: 16 A, open-circuit voltage: 95 V, welding current at 100% duty cycle: 120 A, protection type (IP code): IP21, welding current (min.): 2 A, welding current (max.): 165 A, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Orbitalum Orbimat 165 CA orbital welding package for tube welding. The package includes: - Orbitalum ORBIMAT 165 CA orbital welding power source / control unit - 2 x Orbitalum ORBIWELD 76S closed orbital welding heads - Orbitalum GFX 3.0 pipe cutting / beveling machine with GF10 drive unit - Hoses, cables, collets / inserts, and accessories as shown in the photos Component details: - ORBIMAT 165 CA: year 2017, serial number 2017-2034 - ORBIWELD 76S #1: year 2020, serial number 3764 - ORBIWELD 76S #2: year 2016, serial number 2489 - GFX 3.0 with GF10 drive unit: year 2016 The equipment is used and sold as-is. A power-on inspection is possible. The ORBIMAT power source starts up, and ORBIWELD head rotation / test movement is demonstrated in the video. A full welding test is not currently available. Condition and completeness are as shown in the photos. Tedpozq A Enjfx Amrsc Loading: We have forklift / pallet handling capabilities on site and can load the equipment onto the buyer’s truck. Removal: Available immediately. The removal timeline can be agreed upon with the buyer. Transportation is at the buyer’s expense.

Condition: used, Can filler for beverages, manufacturer: KHS, model: 4 SVF 120 / D, for 80,000 cans/hour with 0.33 l cans for carbonated soft drinks, with can seamer, manufacturer: Angelus, model: 121 L (202), year of manufacture: 1991 Tjdpoyzhl Refx Amrec

Condition: used, Filler, manufacturer: KHS / H+K, type: Delta VVF 90/16, rated output up to 38,000 bph, operated at 24,000 bph, with 90 filling valves, with double pre-evacuation, vacuum pump, high-pressure injection, motorized height adjustment, with CIP caps, residual liquid control before filler infeed, with 16-head crowner including crown cap feeder, running direction: left to right, year of manufacture: 1982, retrofitted with new S7 control system in 2004. Tedpfx Ajyzhqtemrsc

Condition: used, Bottle filler for mineral water, manufacturer KHS / SEN, model: VVF-90-KK16-SV16, equipped with 90 filling valves, 16-head crown corker, and 16-head screw capper, capacity: 35,000 bottles/h, for 0.7 l GDB / 0.25 – 0.75 l Gastro / + 0.5 l NRW bottles. Tsdpfxjyzhice Amrsc

Condition: good (used), CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Made in Italy. Sheet feeding is manual, while the machine handles the rest automatically. An automatic feeder can also be added (optional). Parameters are set from the control panel and jobs can be saved to the machine’s memory. Materials processed range from 200 GSM to 4 mm cardboard. Sturdy construction, weighs 750 kg. Adjustable creasing and counter-creasing widths. Stepper motor control. Tedjzw Typjpfx Amrec Fast operation, up to 2400 sheets/hour. Sheet size: 750 x 1400 mm. Two sheet guides with an extended table and pressure rollers. Quick machine format conversion in less than 1 minute. Receiving table included.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, load capacity: 180 kg, arm reach: 3,100 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending Brand: KUKA Model: KR 240 L180-2 2000 Year: 2006 Control Cabin: KRC2 ED05 Rated Payload: 180kg Access Distance: 3100mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + Shipping: NOT included in the price Payment: 100% payment prior to collection Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. Tsdpfjzpxxbjx Amroc

Condition: used, mileage: 1,001 km, first registration: 01/2005, color: blue, driver cabin: other, gearing type: other, loading space volume: 16 m³, loading space length: 4,800 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Year of construction: 2005, Vehicle location: Bovenden, steel superstructure, left-hand on-board mechanism Body: 1-sided tipper body approx. 16.5m³ with board-matic left and space for rear crane Subframe rear longer for rear crane mounting! Dismantling of DAIMLER-BENZ Actros 3341 K 6x4 with rear crane! Tjdpfx Amsvhk Txsrec The exact year of construction cannot be determined as there is no longer a type plate! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Rotary cup filling and sealing machine S version (PLC control) Tsdpfx Amozdzvfsroc E version (extended basic frame) Approx. 2,500 cups per hour Filling volume: 10 ml - 2,000 ml Suitable for cups/buckets in the food and beauty sector (with or without a handle) 8 stations Operations: - Cup destacking - Cup filling - Cup heat sealing - Cup capping

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Manufacturer - Canellitech Srl Todpjulpu Sefx Amrec Model - 8-1 (8 x filling heads). Date of manufacture - 2019. Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Condition: excellent (used), Year of construction: 2006, 45 linear meters of SSI Schäfer Palflex pallet racking, including shelf inserts Used item, in good condition, see photos Year of manufacture 2006 Height approx. 6.5 m Depth 120 cm Field load 12,000 kg Frame galvanized Beams red Shelf inserts included! 2 pieces of grating per 2.7-meter beam length Negotiable price: €7,490.00 net ex warehouse Tjdpskx E Ryofx Amroc Offer includes: + 17 units of frames, pre-assembled, depth 120 cm, height approx. 6.5 m + 96 units of beams, length 2.7 m, 1500 kg load capacity per shelf with evenly distributed load + 192 units of safety locks + 96 units of galvanized shelf inserts for 48 levels, each 2.7 meters beam length + 68 units of concrete anchors + Load signs Item is in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30-50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelf racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND CORE BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including complete clearance. 2. Commission-based auction: Conducting auctions on commission. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Tsdpfx Amoynrzbjrjc Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately

Condition: excellent (used), ALFA LAVAL CAF 2H/1 – Double-Head Aseptic Filler – Stainless Steel ALFA LAVAL CAF 2H/1, a 2-head aseptic filler, designed for the sterile filling of liquid, semi-liquid, and viscous food products into large-format aseptic packaging within industrial processing lines. The dual filling head configuration allows operation with two stations, facilitating process continuity and increasing operational flexibility. This type of equipment is especially suitable for packaging pre-sterilized products that must be maintained under aseptic conditions until sealing. Its stainless steel construction, protected filling zones, and automatic control system allow it to be integrated with sterilizers, aseptic tanks, and complete processing lines for fruits, tomatoes, and other food products. MAIN FEATURES -Manufacturer: ALFA LAVAL -Model: CAF 2H/1 -Type: Automatic aseptic filler -Number of heads: 2 -Dual filling station configuration -Product filling under aseptic conditions -Designed for pre-sterilized product -Automatic process control system -Sanitary product circuits -Construction primarily in stainless steel -Integrated process instrumentation and valves -Central control panel -Closed filling zones with safety guards -Roller conveyors for handling the packaging -Designed for industrial operation -Integrable into complete aseptic processing lines PROCESS The ALFA LAVAL CAF 2H/1 receives the product that has already undergone sterilization and guides it to the filling heads, maintaining the required hygienic conditions during filling. The packaging is positioned at the corresponding station and connected to the filling system, with the product transferred within a protected and controlled zone. Once filling is complete, the packaging can be removed and replaced with another to continue production. The 2-head configuration is particularly useful for maintaining an efficient workflow during packaging changeover operations. APPLICATIONS Especially suitable for processors of tomatoes, fruits, and vegetables, as well as manufacturers of purees, pulps, concentrates, juices, and sauces that need to package sterilized products for storage or distribution. Depending on the installed configuration, it can be used with aseptic bags in drums, bins, or other industrial containers. Tjdpfozxk Tpsx Amrjc It can be integrated with aseptic sterilizers, buffer tanks, sanitary pumps, CIP systems, and UHT lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Year of construction: 2006, operating hours: 12,260 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H30D-01 Triplo 465 Freelift / Sideshift / 4th Function, VW Diesel, 2006 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Tedpfx Aezqmxxomrec Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2020, condition: new, New - Soco Carton / Box Erector Model F-100-5 Never installed Qty 2 available Tjdpfxjyvutwj Amroc