Used Jks Positive Saddle-Mounted Monoblock Unit for sale (44,592)

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A Nedpfoxvr T Eex Ab Asdc - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod - Evaporator fans - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Technical data: - max. load capacity 1500 kg - Flat plate diameter 850 mm - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm Nodpfxerkmaao Ab Ajdc - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg - Weight of rotating unit approx. 400 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1085, Offer 24448 Technical specifications: - Maximum load capacity 5000 kg - Maximum clamping diameter 1800 mm - Faceplate dimensions 1200 x 1200 mm - Continuously adjustable electrical rotation - Right and left rotation - Electric remote control - Welding current transmission approx. 650 A - Drive 400 V / 2.2 kW - Space requirement approx. W 1500 x H 1650 x D 1300 mm Nodowfq Nmjpfx Ab Aedc - Weight approx. 2500 kg

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz Nodpfxsu S Tfgj Ab Asdc - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Njdpofx Hyfefx Ab Ajdc Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: used, Year of construction: 2001, machine/vehicle number: 008147801, Offer 26176 Technical data: - Dimensional stop with digital display 6000 mm Ndedpfxjzhamds Ab Aoc - Jaw feed adjustable by handwheel with clamping function - pneumatic stop clamping - Pneumatic connection 6 bar - Space requirement approx. L 7700 x H 1350 x D 900 mm - Weight approx. 1200 kg

Condition: new, - External dimensions (LxWxH): 644x930x863 mm - Application range: -18 ÷ -22°C - Evaporation temperature: -30°C Ibedcvyexvr Upoqi Asd - Condensation temperature: +40°C - Cold room temperature: -20°C - Ambient temperature: 32°C - Defrost: Hot gas - Power supply: 230 V / 1+N ph / 50 Hz - Maximum absorbed current: 13.2 A - Maximum absorbed power: 2.8 kW - Nominal absorbed power: 110 W - Refrigerant: R452A - Output: 1,318 W - Nominal output: 1.9 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø300 mm - Airflow: 1,000 m³/h - Air throw: 6 m - Weight: 89 kg - Volume: 0.80 m³ - Hermetic compressor - Air-cooled condenser - Galvanized sheet body - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (BT models only) - Ambient temperature sensor - End-of-defrost sensor - Condensation control sensor - Power cable for door heater - Micro-switch connection cable - Digital display with temperature indication Ndsdpfjxvr Upsx Ab Aec - Operating status display: - Cooling/defrost - Evaporator fans - Active alarm - Programming keys - Manual defrost button - Audible alarm - Low and high temperature alarm - High condenser temperature alarm (dirty condenser) - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - End-of-defrost time overrun alarm - Faulty temperature sensor alarm - Condensation control sensor failure alarm - Evaporating temperature at -10°C for positive temperature (TN) - Condensation temperature at +40°C for TN - Evaporating temperature at -30°C for low temperature (BT) - Condensation temperature at +40°C for BT The listing was translated automatically. Translation errors are possible.

Condition: new, functionality: fully functional, machine/vehicle number: TKG, cooling capacity: 3.5 kW (4.76 HP), overall weight: 40 kg, input voltage: 230 V, warranty duration: 12 months, type of cooling: air, Monoblock air conditioning units (with exhaust hose), original packaging, for sale. The following sizes are available: Nedpfxswwrk As Ab Aodc 2 kW (BTU 7000) for rooms up to 23 m² – €213.00 2.6 kW (BTU 9000) for rooms up to 25 m² – €272.50 3.5 kW (BTU 12000) for rooms up to 35 m² – €390.00 3.5 kW (BTU 12000) for rooms up to 35 m² with WIFI – €451.00 Shipping within Germany per unit: €25.00 Manufacturer: KALORIK All prices incl. VAT.

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 3GBG252051-ADK,002,009, The machine is a wood gasifier that converts the gas from wood chips into electricity that is generated from a 6-cylinder GM engine. The machine was acquired as part of the property that includes a boutique hotel. It was subsequently shut down when we did not have the capacity to operate it and the hotel. We expected to once again redeploy it but the base business keeps us too busy to add the operation and maintenance required of the machine. Njdpfx Abj Adl Hrs Aodc

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12170000763, controller manufacturer: Heidenhain, operating hours of spindle: 4,121 h, coolant supply: 40 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, DMG DECKEL MAHO DMU 105 monoBLOCK – 5-Axis CNC Machining Center Year of construction 2013 | Heidenhain iTNC 530 HSCI | 18,000 rpm | 60 tool positions | Spindle renewed For sale is a high-quality equipped 5-axis CNC machining center, the DECKEL MAHO DMU 105 monoBLOCK, with extensive special equipment. The machine was used for the precise machining of demanding milling parts and features a powerful configuration for 5-axis simultaneous machining. Of particular note is the already renewed main spindle. The spindle was replaced after 24,687 spindle hours. The currently installed spindle has only 4,121 operating hours. Technical data Feature Equipment Manufacturer DECKEL MAHO / DMG Model DMU 105 monoBLOCK Year of construction 2013 Control system Heidenhain iTNC 530 HSCI Machining 5-axis simultaneous Travel X 1,135 mm Ndjdpfx Abo Afbpro Ajc Travel Y 1,050 mm Travel Z 750 mm Spindle speed 18,000 rpm Tool interface SK40 Tool magazine 60 positions Swivel range A-axis +120° / -120° Rotational range C-axis 360° Table size 1,200 × 850 mm Rotary table diameter 1,050 mm Maximum table load 1,500 kg Operating hours and spindle replacement Machine switch-on hours: 42,848 h Spindle replacement at: 24,687 spindle hours Current spindle hours: 4,121 h The already carried out spindle replacement represents a significant advantage compared to comparable used machines with high spindle running time. Extensive special equipment Control and measuring technology Heidenhain iTNC 530 HSCI Heidenhain TS 649 infrared workpiece measuring probe BLUM laser for tool length and diameter measurement 3D quickSET extension package Electronic Heidenhain handwheel ATC tuning cycle for optimizing machining parameters Tool and spindle system Main spindle with 18,000 rpm SK40 tool interface 60-position vertical chain magazine Active spindle cooling Cooling air blow function through the spindle Coolant and chip management Internal cooling through the spindle with 40 bar Coolant system with 600-liter tank Scraper conveyor chip extractor with paper band filter Coolant ring nozzle on the spindle head Flush gun with pump Chip flushing in the working area Oil and emulsion mist separator with mechanical filter Other equipment NC rotary table Operating mode 4 - Process monitoring in manufacturing German machine documentation Electrical circuit diagrams Machine description The DMU 105 monoBLOCK impresses with its generous working area, its stable machine construction, and the extensive equipment for demanding 5-axis milling operations. The combination of Heidenhain control, 18,000 rpm spindle, 60 tool positions, and integrated workpiece and tool measurement makes the machine suitable for both single-part production and economical series production. The powerful coolant system with 40 bar internal cooling, paper band filter and large coolant volume complements the extensive equipment. A particular advantage is the renewed main spindle with only 2,808 operating hours currently. The machine is offered for sale due to a change in the company's operations. Inspection possible by appointment. Fixed price!!! The price is non-negotiable.

Condition: used, Year of construction: 1997, machine/vehicle number: M294, Used Filling Monoblock Metalnova for still and sparkling water 12000 bphThe Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, model LG, offers a bottling solution designed to process still and sparkling water in 2-liter containers, with a production capacity of 12,000 bottles per hour. Manufactured in 1997, the machine is currently dismantled and in storage. It operates in a counterclockwise direction and supports both PET and glass containers, thereby ensuring flexibility for mixed-format bottling lines. Moreover, its design allows seamless integration into existing production environments.Monoblock Configuration and Bottle Rinsing ProcessThe monoblock begins with a rinsing unit equipped with 60 grippers, which has been engineered to clean containers thoroughly before filling. Notably, the system performs two treatment phases, which not only remove impurities but also prepare each container for the subsequent filling stage. As a result, the unit maintains consistent hygiene standards while sustaining high throughput. In addition, the rinsing module integrates directly into the Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, thereby ensuring accurate container positioning for downstream operations.Isobaric Filling System with Traditional Valve TechnologyAt the core of the Used Filling Monoblock Metalnova for still and sparkling water 12000 bph lies an isobaric filler equipped with 60 valves. The system, in particular, uses traditional isobaric valves, which allow the machine to accurately manage both carbonated and non-carbonated liquids. Consequently, it maintains pressure stability throughout the entire filling process. In doing so, it minimizes foam generation and preserves CO₂ in sparkling beverages. Furthermore, this configuration makes the filler suitable for dual-function production lines that handle a wide range of water products with precision and efficiency.AROL Capper with Three-Roller Threading System for Plastic Screw CapsFollowing the filling phase, the AROL capping unit applies aluminum screw caps using a three-roller threading mechanism (“3 principles Alaska”). This component includes 10 heads, each engineered to ensure uniform closure at high speeds. More specifically, the “3 principles” system uses three threading rollers to apply consistent torque and secure sealing. Thus, the capper guarantees reliable performance across various formats and cap types. It is especially effective for high-volume operations. Additionally, it aligns perfectly with the performance characteristics of the Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, maintaining closure accuracy and product integrity.Electronic Control and Spare Parts AvailabilityThe machine uses a Siemens PLC to control its various operational stages. This platform not only ensures system stability but also allows for easy diagnostics and interface integration. Besides that, built-in safety features ensure compliance with modern industry standards and operational security. What’s more, the Used Filling Monoblock Metalnova for still and sparkling water 12000 bph comes with a set of available spare parts, which greatly facilitates both routine maintenance and emergency repairs. Therefore, operators can reduce unplanned downtime and extend equipment life without the need for complex interventions. Ndedj Adyx Aopfx Ab Ajc

Condition: used, Year of construction: 2005, machine/vehicle number: M272, Used Filling Monoblock GAI 2405 1500 bph pre-owned monoblock filler / used bottle filling triblockThis Monoblock offers, therefore, a highly specialized solution for bottling still wine in glass containers, designed to meet the needs of technical precision and production continuity for industry operators. GAI manufactured this machine in 2005, and it achieves a filling speed of 1500 bottles per hour, which ensures, in turn, high efficiency for medium-capacity production lines. As a monoblock filling machine (often searched as a used bottle filling triblock integrating rinser, filler, and capper), this pre-owned solution is ideal for wineries seeking a compact, reliable monoblock filler within a single frame.Filling Specifications of the Used filling monoblock GAI The filling system of the GAI 2405 monoblock, meanwhile, delivers high precision in handling the product, maintaining consistent operating conditions. This model, in particular, uses 12 gravity or light depression filling valves, which effectively prevent turbulence or alteration of the still wine during processing. The filling valves, consequently, stay in a fixed position, reducing the risk of contamination or leaks. As a gravity/light-depression system, it is not an isobaric configuration, making it well-suited to still products while remaining compatible with ancillary options such as a nitrogenator upstream or downstream if the line owner wishes to manage dissolved oxygen more tightly. These traits make it highly competitive among monoblock filling machines for still beverages.Rinsing Section The Used Filling Monoblock GAI 2405 1500 bph rinsing system includes 12 grippers that perform a cleaning treatment for each bottle. The system, thus, completes rinsing in a single phase, which removes any residual particles inside the containers before filling. This single-treatment configuration, additionally, optimizes processing time and improves overall speed without compromising quality. In the context of a compact used bottle filling triblock, this integrated rinser enhances hygiene while maintaining a streamlined footprint.Capping Features The capping section of this model of Used filling monoblock GAI supports straight corks and includes one head for cork insertion, which enables the production of still wine in formats of 0.75 L, 1.0 L, and 1.5 L. This head is specifically designed to drive the corks into a flush-fitting position. This feature of operating with straight corks, as a result, ensures adherence to the traditional characteristics of the final product and, in turn, meets specific market demands. Within a monoblock filling machine architecture, this single-head corker provides dependable, repeatable cork application aligned with premium still-wine presentation.Design and Structure The Monoblock features a design that ensures long operational life and easy maintenance. Operators can access each component for cleaning and inspection, allowing for safe and efficient management of the machine. Moreover, the integration of rinsing, filling, and capping sections into a single unit reduces the machine’s footprint, which, therefore, optimizes space in the facility. The turret rotation is clock... Ndedpfx Abe Adywrj Ajc

Condition: used, Year of construction: 2017, Manufacturer: DMG MORI, Type: DMU 75 monoBLOCK, Year of manufacture: 2017, Serial number: 12430007443, Operating hours: 28,368, Spindle hours: 11,627, Control system, Manufacturer: Heidenhain, Type: iTNC 530, 21" Operator terminal ERGOline Touchscreen, Tool changer, 63-position SK 40, Travel range X/Y/Z: 735 x 650 x 560 mm, Spindle speed max.: 12,000 rpm, Machine table clamping area: 1,000 x 650 mm, Coolant system, Oil mist extraction, Chip conveyor, Chip cart Nsdpfxez Tluco Ab Ajdc +++ IMPORTANT: This machine is part of an online auction! +++

Condition: used, Year of construction: 2018, operating hours: 18,939 h, machine/vehicle number: PST41, Used HRS tubular skid-mounted pasteurizer cold-fill 3000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems pasteurizer is a stainless-steel packaged process skid designed for controlled thermal treatment within beverage production and industrial packaging operations. Pasteurizers are used to apply a defined heating and cooling process that supports product stability and consistent processing before downstream filling, labeling, capping, or secondary packaging.Manufacturer: HRS Process SystemsModel: 1 x 20 M170 - 63/100 8000Configuration: SKID - 1Year: 2018Operating hours: 18,939Construction: Stainless-steel process skid assemblyAdvanced Automation & Control SystemsThe machine is supplied as a process skid, providing a compact arrangement for thermal processing equipment and associated process connections. A pasteurizer installation is typically integrated with the line control architecture to coordinate product flow, heating, holding and cooling stages with upstream and downstream equipment.Control, electrical supply and instrumentation arrangements should be evaluated during commissioning according to the requirements of the receiving production line.Production Line Integration CapabilitiesThis pasteurizer can be positioned within a used bottling line or beverage production process where controlled heat treatment is required before packaging. Depending on the product and process design, pasteurization equipment is commonly integrated with product preparation, buffer tanks, filling machinery and conveying systems.The skid configuration supports organized installation within industrial packaging environments and can be assessed for connection to existing process piping, utilities and production line automation. It is suitable for applications involving liquid products where pasteurization forms part of the required production process.Machine Condition & Maintenance HistoryManufactured in 2018, this second hand pasteurizer has recorded 18,939 run working hours. The available operating-hour record provides a useful reference for maintenance planning, inspection and integration into a bottling equipment project.A pre-installation technical inspection can focus on the condition of process connections, heat-transfer components, valves, pumps, instrumentation and skid-mounted assemblies, together with confirmation of suitability for the intended product and operating process.Operational Performance & VersatilityPasteurization is an important processing step for many beverage production applications, helping operators manage thermal treatment before products move to filling and industrial packaging stages. The stainless-steel skid arrangement is appropriate for hygienic process environments and supports structured access to the installed equipment.When incorporated into a production line, a pasteurizer can contribute to stable process conditions and repeatable thermal handling. Final operating parameters depend on the product recipe, target process, line configuration and validation requirements.Installation Requirements & Site PreparationInst... Nedpfx Aj Adtrvsb Aedc

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,243 h, spindle speed (max.): 20,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 monoBLOCK was manufactured in 2017. It features a Siemens SINUMERIK 840 D control system and a high-pressure pump for internal coolant supply at 20 bar. The machine includes a 3D measuring probe from Heidenhain and has 60 magazine positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 monoBLOCK universal machining centre we have for sale. Contact us for further details. - Spindle Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle)- Tool Taper: HSK-A 63 according to DIN 69893)- Tool Magazine: Chain magazine with double gripper, 60 tool pockets (HSK-A63)- NC Swivel Rotary Table: Integrated in rigid table, 800 mm x 650 mm- Control System: CELOS with Siemens 840D sl Operate, including 21.5" ERGOline Control with Multi-Touch Screen- Features: MPC (Machine Protection Control), Chip flushing, Integrated coolant tank 500 l- Coolant / Chip Disposal included:* Production Package: Scraper belt chip conveyor with coolant system 600 liters, paper band filter, discharge height 950 mm, width 670 mm* Internal Coolant Supply (IKZ): 40 bar / 20 l/min through spindle center (AD)* External Coolant Supply: 4 bar / 40 l/min* Washdown Pistol with pump (2 bar / 10 l/min)* Oil and Emulsion Mist Extraction System: Mechanical filter, airflow rate 600 m³/h- Measuring / Monitoring:* Infrared Measuring Probe: Heidenhain TS 649 (HSK-A63)* 3D quickSET: Tooling check and inspection of kinematic accuracy for 4/5-axis machine configurations Technical Specification Nsdpfxozdzmwo Ab Asdc Through-spindle Coolant Yes Taper Size HSK 63

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Nsdpfjz Rqcmjx Ab Asdc Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: used, Year of construction: 1989, 3 St. Njdpfx Ajzr Rqzsb Aedc 110 mm Weight 30 kg Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Type 76 feed unit for table saws and panel saws of various makes - For safe cutting of solid wood strips, planks, window stiles, etc. - With adjustable mounting profile, 3 feed rollers, and 2 fixed speeds - Quick adjustment to workpiece height via a handwheel - With dust extraction connection for dust-free operation, including plug - With rail for mounting heights from 18 to 40 mm - Quick and easy (tool-free) installation and removal - Transparent, swing-away guard for optimal visibility and ergonomic operation when cutting moldings - Supply voltage: 400 V / 50 Hz - Weight: approx. 30 kg

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 95 Monoblock was manufactured in 2016. It features a tool capacity of 60 tools and is equipped with a Heidenhain TNC640 control unit. The machine includes an internal coolant supply of 40 bar and a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 95 Monoblock vertical machining centre we have for sale. Contact us for further details. Nsdpfx Abjz S E Els Aodc - Internal Coolant Supply (IKZ): 40 bar- Tool Measurement: Blum laser tool measurement- Optional Equipment: FCS clamping system (optionally included / available for additional purchase)- Operational Status: Fully functional, currently still in full operation- Machine Condition: Good; air/sight glass on the front is defective; runs very smoothly and with high accuracyThe displayed image of the machine is AI generated. Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2016, machine/vehicle number: M296, Used Filling Monoblock ALFATEK Elvira for beer 2000 bph General Characteristics of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph The Used Filling Monoblock ALFATEK Elvira for beer 2000 bph serves as a filling system specifically designed for bottling beer in glass containers, ideal for artisanal or semi-industrial production lines. Alfatek built the unit in 2016, and the Elvira 3/9/1 model handles a production speed of 2000 bottles per hour in the 33 cl format, while also supporting the 75 cl format. Therefore, it meets the needs of breweries with varying product volumes. Moreover, its configuration allows easy integration into existing lines. In particular, this monoblock suits breweries focused on maintaining product quality. Mechanical Configuration and Working Direction The machine operates with a clockwise rotation and includes certified safety guards, which ensure compliance with workplace safety regulations. Furthermore, the safety system prevents accidental operator contact with moving parts. Currently, the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph remains offline but fully functional. In addition, all technical manuals are available, and the system has undergone regular maintenance and revision. As a result, the machine retains its mechanical integrity. Thus, it stands ready for immediate use upon installation. Ndedpfe Adt Taex Ab Aoc Light Pressure Filling System At the core of the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph lies the filler with 9 valves, configured for light pressure filling. Notably, this system is ideal for beer, as it preserves carbonation and minimizes agitation. Consequently, it prevents foaming and ensures a clean fill level. The system ensures precision, consistency, and compatibility with 33 cl and 75 cl glass bottles. Additionally, operators can clean and maintain the valves with ease. In other words, this machine simplifies process control. Therefore, it supports stable and hygienic production. Single-Head Capper for Two Cap Sizes The capping unit, integrated into the monoblock, features a single head for crown caps, compatible with 26 mm and 29 mm diameters. The capper, manufactured by AROL, offers high reliability and synchronizes perfectly with the filling phase. Moreover, its construction ensures durability even under regular use. As such, it guarantees a secure seal for each container. Besides that, the capper minimizes the risk of misalignment. For this reason, many small breweries prefer this model for its simplicity and efficiency. Product Application and Container Type Manufacturers designed the Used Filling Monoblock ALFATEK Elvira for beer 2000 bph specifically for beer bottling in glass containers. The machine does not support plastic or can formats. Because of this, it best suits craft breweries seeking high-quality packaging solutions. The light pressure filling system preserves the beer’s organoleptic properties and maintains its effervescence. In contrast, gravity filling would compromise carbonation. Therefore, this setup remains optimal for delicate products. Furthermore, the glass packaging ensures longer shelf life and consumer appeal. Operational Condition and Spare Parts The monoblock remains in good working condition and is available for functional testing. Even though it is no longer in production, it maintains its full operability. A full set of origi...

Condition: used, HANS Type: GSX 500-3.98 Ndedo Aaxbzjpfx Ab Ajc HANS column-slewing crane / column-swivel crane Load capacity: 500 kg / reach: 3,050 mm For sale: a HANS column-slewing crane with a LIFTKET electric chain hoist for industrial, workshop, production, assembly, and maintenance applications. The crane is suitable for operational lifting tasks and can be used to lift, position, and move workpieces, components, and machine parts. Technical data according to the nameplate Manufacturer: HANS-Hebetechnik + Metallbau GmbH Type / Designation: GSX 500-3.98 Year of manufacture: 2011 Design: Column-slewing crane Load capacity: 500 kg Reach: 3,050 mm Self-weight according to the crane nameplate: 360 kg Electric chain hoist LIFTKET Manufacturer: HOFFMANN Fördertechnik GmbH / LIFTKET Type: 021/51 Year of manufacture: 2011 Load capacity: 250 / 500 kg Lifting speed: 8.0 / 2.0 or 4.0 / 1.0 m/min Chain dimensions: 4 × 12 mm Power connection: 380–415 V / 3 phases / 50 Hz Control type: Direct control Protection class: IP55 Equipment / Features HANS floor-mounted column with slewing arm LIFTKET electric chain hoist Electric trolley Load hook Hand control / control pendant Chain catch container Crane main switch on the column Floor mounting via base plate Industrial design Condition & Notes Condition: used Visual condition: see pictures Signs of wear and tear due to use Functional testing not documented Scope of supply HANS column-slewing crane GSX 500-3.98 LIFTKET electric chain hoist Hand control Scope of supply as per sales agreement and pictures Dimensions & Weight Reach: 3,050 mm Load capacity: 500 kg Self-weight according to the crane nameplate: 360 kg Overall height and transport dimensions: not determined Total weight including accessories: not determined The actual transport dimensions and total weight depend on the scope of supply and the dismantling condition. Shipping or freight transport is possible by arrangement. Dismantling and loading must be coordinated in advance. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2013, machine/vehicle number: MBI17, Used Casepacking Monoblock ITAL PAL 1650 bph The Used Casepacking Monoblock ITAL PAL 1650 bph is a packaging system that consists of three independent units that operate in sequence to ensure an efficient and continuous process. Consequently, it enhances production flow while minimizing bottlenecks. The machines that make up the Used Casepacking Monoblock ITAL PAL 1650 bph were manufactured by ITAL PAL in 2013. Notably, the system’s design focuses on efficiency, durability, and flexibility. The monoblock consists of a FCN70 case erector (Case Erector), a PK300 T1 case packer (Case Packer), and a CSN70 case sealer (Case Sealer), which allow for high flexibility in packaging management. Additionally, these three units operate in sequence to ensure an efficient and continuous process. As a result, the monoblock seamlessly integrates into various production lines. Structure and Components The FCN70 Case Erector automatically opens boxes from flat blanks, ensuring precision in folding and maximum stability. Furthermore, the process automates the handling of materials and supports a straight entrance for optimal integration with the subsequent packaging stages. The PK300 T1 Case Packer is the central element of the system and performs the packing function by inserting products into the cartons with precision. Moreover, this model operates at a production capacity of 1650 bottles per hour (bph), thereby optimizing cycle times and reducing material waste. Similarly, its robust structure ensures long-term performance with minimal maintenance. Finally, the CSN70 Case Sealer completes the process by applying an adhesive tape closure, thus ensuring packaging integrity and product security during transport and storage. Additionally, the sealing system allows for consistent adhesion, reducing the risk of package failure. Technical Features The Used Casepacking Monoblock ITAL PAL 1650 bph features 24 electrical sockets for connecting the different units and controlling and integrating peripheral equipment, such as external conveyor belts, sensors for quality control, barcode scanners, and communication interfaces for seamless connectivity with other machines in the production line. In particular, these additional systems help maintain process accuracy. Furthermore, its modular configuration allows for separate maintenance of the machines, thereby reducing system downtime. The integrated safety features ensure compliance with industrial standards, with protection systems and interlocks that prevent accidents during operation. Likewise, the user interface is designed for intuitive management by technical personnel, while control panels allow the adjustment of processing parameters in real-time. Consequently, the machine offers a balance between automation and operator control. Njdpfj Adywfex Ab Aedc System Operation The process begins with feeding the blanks into the FCN70 (Case Erector), which performs the opening and forming of the cartons using suction systems and pneumatic pistons. At the same time, the system monitors precision to prevent misalignment. The carton...

Condition: used, Manufacturer: Ima Farmomac Model: F370 18VL 8C Year: 1987 frame - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Ndsdpfxszg I Uye Ab Asc Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Number of filling heads: 18 units Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Vial infeed conveyor with paddles Control box and power cabinet. Protective covers with safety devices. Available history and documentation   These elements can be quoted separately. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.

Condition: good (used), MBO T500-2/4 folding module + T-500-2-X cross-folding knife unit Machine in very good condition, ready for production. From the original owner. This is a secondary (cross-folding) module for an MBO folding machine, complete with an additional knife-folding unit. Includes 4 folding cassettes and one cross-folding knife. Njdez S Uptopfx Ab Aedc Equipped with sound-dampening cassettes. Can be connected to virtually any MBO machine model or used as an add-on unit for other machinery. Mounted on casters for easy mobility. Independent control system.

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h New condition Ndsdpfx Asyil A Ssb Ajc Dimensions LxWxH: 2650x1800x2230mm Location - Poland

Condition: like new (used), Year of construction: 2024, operating hours: 24 h, functionality: fully functional, number of cylinders: 12, cubic capacity: 21,970 cm³, rotational speed (min.): 1,500 rpm, type of cooling: water, CHP POWER PLANT fueled by SYNGAS (Woodgas) with electrical capacity 140 kWel and thermal capacity 280kWth Ndjdjz Iyq Tspfx Ab Aec