Used Ipe Splashback for sale (2,032)

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) Lasdpsy Dc R Tofx Ancea New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty without guarantee

Condition: new, Year of construction: 2026, Type and specifications The distinctive advantages: Space-saving compact design - comfortable and powerful. Ledpfx Aneb R D U Socoaa Excellent surface quality and pleasant working environment by diagonal low-turbulence airflow. Large capture window by air deflectors - suitable even for large workpieces. Separation of paint mist up to 99%, rear retaining capacity of the filter up to 18 kg / m ² - big filter booth time! Quick and easy filter change on the front page. Low-cost replacement filters. Low cost and extremely low energy consumption. Dry spraying wall of galvanized steel with welded base frame, cardboard labyrinth as a preliminary filter and glass fibre filter as a post filter unit. Grown ex fan incl. throttle links. Make no compromises in the quality of the surface. Suction walls easy paint are the ideal low-cost solution for the effective detection and filtering of paint mist, as well as extraction solvent vapours. Robust and powerful but economical in use. Standard suction power of easy paint 3500 model 600025 air performance on standard delivery * 3500 m ³/h filter surface primary 2,5 m² filtration area secondary 2.0 m ² power motor 400V/50 Hz * ex 1,1 kW Connection pipe suction pipe D 300 mm width in mm = 2750 overall height 1455 mm Depth in mm with capture window 855 weight in kg 145 Stando

Condition: as good as new (ex-display), Year of construction: 2026, The impressive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and a pleasant working environment due to diagonallow-turbulence air-stroemung. Large detection window thanks to air guide plates – thus also suitable for larger factory troughs. Separation degree of paint mist up to 99%, return ability of the pre-filter up to 18 kg/m2 - thus great filter life! Easy and fast filter change on the front. Cost-cost replacement filters. Low acquisition costs and low energy requirements. Dry spray wall made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fiber filter as post-filter unit. Ex-fan incl. throttle valve attached to the left. Do not compromise on the quality of the surface. Suction-weighing Easy Paint are the ideal cost-effective application for the effective detection and filtering of the paint mist as well as the suction of the solvent dimempfe. Robust and powerful but economical in consumption. Thanks to the IPE double filtration system, two filter levels ensure a maximum separation degree of up to 99%. Thanks to the folded filter pockets, the cardboard labyrinth filter absorbs considerably more overspray (up to 18 kg/m2 filter area) than conventional filter mats. The downstream fiber glass fiber second-based filter absorbs only the finest residual particles. Laodedqc U Hspfx Ancja As a guideline, the cardboard labyrinth

Condition: as good as new (ex-display), Year of construction: 2026, The captivating advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working climate due to diagonal low-turbulence air flow. Large airflow window due to air baffles - therefore also suitable for larger workpieces. Separation efficiency of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² - therefore long filter life! Easy and quick filter change on the front side. Inexpensive replacement filters. Low purchase costs and extremely low energy consumption. Dry splashboard made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fibre filter as after-filter unit. Ex-fan incl. throttle valve mounted on the left. Do not compromise on the quality of the surface. Easy Paint extraction walls are the ideal cost-effective solution for effective collection and filtering of paint mist and extraction of solvent vapours. Robust and powerful but economical in consumption. Ljdpfxocnz Iqe Ancoaa The IPE double filtration system provides two filter stages for a maximum separation efficiency of up to 99 %. The cardboard labyrinth filter initially absorbs considerably more overspray (up to 18 kg/m² filter surface) than conventional filter mats due to the folded filter pockets. The downstream glass fibre secondary filter absorbs only the finest residual particles. As a guide value, the cardboard labyrinth filter, depending on

Condition: good (used), The scope of delivery includes: 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm agraffe: 3 drillings clear width: approx. 2.700 mm 3 holes per agraffe hole spacing: approx. 100 mm diameter of holes: approx. 11 mm 01x Set screw material consisting of: 06x screws M10 Lodpfxsibzfto Anceaa 06x nuts 06x washers

Condition: good (used), Technical data for the pallet racking traverse: Racking system: SSI Schäfer Type: PR600 The scope of delivery includes: 01x pallet rack beams, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per truss pair 2,800 kg, with evenly distributed load 02x locking pin, used Version: completely galvanized For securing the longitudinal beams Lodpfxjtqu H Uo Ancjaa against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: SLP Included in delivery: 01x Pallet rack beam, used Material color: grey IPE profile: 100 x 55 mm Bracket: 3 HK (hooks) Laodpjxnzdkefx Ancja Clear span: 3,000 mm 02x Locking pin, used Design: fully galvanized For securing the cross beams against unintentional lifting Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is desired, this will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm agraffe: 5 drillings clear width: approx. 2.700 mm Per agraffe: 5 drillings hole spacing: approx. 50 mm diameter holes: approx. 11 mm 01x Set screw material consisting of: 10x screws M10 10x nuts Lajdoibzgxjpfx Ancea 10x washers

Condition: good (used), TECHNICAL DATA: - Profile dimensions: 550 x 210 mm - Material thickness: T = 17.2 mm | S = 11.1 mm - Material color: white or grey - Condition: used INVENTORY: approx. 10 units | Length: 6,188 mm approx. 10 units | Length: 6,190 mm approx. 35 units | Length: 6,388 mm approx. 15 units | Length: 6,588 mm approx. 20 units | Length: 5,650 mm Remaining stock available in lengths: 6,190 - 6,690 mm PRICING: Price per meter: €47.00 net per meter Tiered pricing available for larger quantities YOUR CONTACT PERSONS: Lasdpfxjxhv Rxe Ancea Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for collection. Delivery or shipping is possible at an additional charge. Extra costs are based on the delivery location and consignment size and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry, and the skilled trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The pillars of DLK’s success: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Dissolver Pendraulik Disperlux IP green 037 Lsdpjyir Anjfx Anceaa Power: 0.37 kW Speed range: 0-12,000 rpm In very good, ready-to-use condition, coming directly from production!

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: MING1+11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,050 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,050 mm, axle spacing: 1,900 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 7,000 kg, Equipment: double-sided, OHRA K60K - Double-sided cantilever rack, long goods rack, heavy-duty rack Two racks are available!!! 12 uprights - 48 cantilever arms K60K Height 3.05m - Uprights IPE200 - Upright spacing 1.9m center-to-center Total depth approx. 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per boom 1000kg Upright load capacity 7500kg Incl. wooden inserts Very good condition, see pictures Forklift available for loading Ledjv Smk Ispfx Anceaa Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: MING11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 18,000 mm, total width: 2,000 mm, total height: 3,000 mm, axle spacing: 1,500 mm, load capacity per stand: 7,000 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Cantilever racking, long goods racking, heavy-duty racking - double-sided Consists of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (both sides) Lodpfxjv Smr Sj Ancjaa Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7000kg Arms are continuously adjustable Including crossbars from arm to arm, including wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: good (used), IKS cooling unit 20.4 kW Manufacturer: IKS Series: IPE 051 Refrigerant: R407 C Quantity: 3.1 kg Max. pressure: 27.6 bar Temp. min/max: -10/55C Cooling capacity: 20.4 kW Compressor power consumption: 5.6 kW Temperature stability: 2 K Tank capacity: 110 liters Water connections: 1 1/4" AG inch Cooling air volume: 5370 m3/h Mains connection: 400/50/3 V/Hz/Ph Net weight: 300 kg Dimensions: LxWxH 980 x 800 x 1785 mm Financing through our bank is also possible. Ljdpfoxbfknex Anceaa komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Condition: new, We offer you here a new pallet rack traverse for sale. Due to the hot-dip galvanized surface these traverses are suitable for outdoor use. Technical data of the pallet rack traverse: Shelving system: Lücht & Palm Type: MB Included in delivery: 01x pallet rack traverse, new Material colour: hot-dip galvanized Ljdpjhg Tkksfx Ancoaa IPE profile: 120 x 60 mm Execution: head traverse Agraffe: 2 HK (hooks) clear width: 1.800 mm max. load per truss pair 3,600 kg, with evenly distributed load 1x set HV-set EN14399-4 - EN14399-6 10.9 Hexagon bolt with nut and washers and washers for HV-connection Material colour: hot-dip galvanized These cross beams have an upstand welded on for the for the storage of shelf grids. (Height: 40 mm / Material thickness: 4 mm)

Year of construction: 2025, condition: new, SPECIAL OFFER! Washing system with granulator + destoning system IWR2000 Washing system with granulator for fruit and vegetables. The system is made entirely of stainless steel and features a sorting grate, a washing tank, and a conveyor belt. The fruit falls into the water and, after pre-washing, is transported along the conveyor belt, where it is thoroughly cleaned with fresh water. The cleaned fruit is then transferred to the mill, where it can pass through the desired sieve to reach the desired mashing unit. • Easy to clean • Minimal maintenance • The belt speed is continuously adjustable in both directions • With 2 steerable rollers • With 2 fixed rollers Technical information Rated capacity: 2000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash discharge height: 1400 mm Wash tank connection: G 6/4" Cleaning connection: G ½" Material: Wnr. 1.4301, AISI 304 stainless steel Water consumption: approx. 12 L/min. Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg IPE4MAX The destoning and straining system is suitable for processing fruit and vegetables. It is equipped with interchangeable sieves and an adjustable rotating rotor for straining or pitting stone fruit, pome fruit, and various types of fruit and berries. The pulp and seeds are ejected separately. The sieves can be replaced quickly and easily. The system is supplied with one sieve; additional sieves can be ordered separately. • Food-safe rubber scraper • Adjustable distance between sieve and scraper • Rolling machine feet/swivel casters with brakes Technical information Lsdpfx Anjwcl Uljcsaa • Rated capacity: up to 4000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apple, pear puree • 5 mm: Cherry • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1130 mm Width: 574 mm Height: 1138 mm Weight: 125 kg

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, suction capacity: 7,200 m³/h, intake manifold diameter: 500 mm, Placing a bid obligates you to collect the item within the specified period until 27/02/2026! MACHINE DETAILS Voltage: 230 V EQUIPMENT - Robust construction - Easy and hassle-free spindle head change - Pneumatic two-hand operation - 6-spindle drilling head - Useful special accessories for extended processing options TECHNICAL DETAILS Exhaust duct diameter: 500 mm Extraction capacity: 7,200 m³/h MACHINE DETAILS Noise level: approx. 78 dB(A) Motor power: 1.5 kW ex External dimensions (L x W x H): 2,500 x 2,000 x 750 mm Height with fan: 2,700 mm Ledpfx Aoyfnqtoncsaa EQUIPMENT - Housing made from galvanized sheet steel - Soundproofing with perforated pre-panel - Folding carton filter with fiberglass filter at the second filter stage - Front panel with high-performance filters - Wall duct NW 500 L = 500 mm round sheet metal plate - Wall outlet 45° with grid - Push-fit connector for hose or pipe NW 500

Condition: good (used), Year of construction: 2013, Cooling machine IKS IPE 121 air-cooled 47 kW cooling capacity pump and tank Year 2013 Price: € 10,400 contact person: Mr. Rainer Eckerle Lsdpfx Aog N I Nljnceaa

Condition: ready for operation (used), functionality: fully functional, Various lathe machines available for steel construction. Suitable for bending and forming steel profiles. Contact us for more information and specifications. Lsdpfxsx Tuups Ancsaa

Condition: used, This listing is for the Isotech IPS 303DD Power Supply The unit is in full working condition and is ready for immediate use Description For sale is a used Isotech IPS 303DD DC Bench Power Supply, a reliable and accurate unit ideal for electronics testing, lab work, or educational environments. This model features precise voltage and current control, dual digital displays, and fine/coarse adjustment knobs for both voltage and current, offering versatility and ease of use in any bench setup. Key Features Output Voltage: 0 – 30 V DC Output Current: 0 – 3 A Dual LED Display: Simultaneous voltage and current readout Adjustable coarse and fine controls Constant Voltage (CV) / Constant Current (CC) operation Overload and short circuit protection 4mm safety binding posts for secure connections Internal fan cooling for thermal management Ideal For Electronics hobbyists and repair professionals Engineering and science students Workshops, makerspaces, and test labs Laedpfoxhfqhox Ancoa

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm Lasdpfet Hw U Ajx Ancja thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: as good as new (ex-display), Reliable transmission of machine data, process parameters and diagnostic data to the controller For the connection of up to eight IO-Link devices Two Ethernet ports with integrated switch Integrated web server for configuration and diagnostics Simultaneous data exchange with the control and the IT world Technical data: Application area Application I/O modules for use in the control cabinet Electrical data Operating voltage [V] 18...30 DC Nominal voltage DC [V] 24 Max. Power consumption [VA] 2.4 Total current carrying capacity [A] 2 Inputs/outputs Total number of inputs and outputs 20 Number of inputs and outputs Number of digital inputs: 18 Number of digital outputs: 10 Inputs Number of digital inputs 18; (8 x 2 + 2 x 1) Input wiring digital inputs PNP Power supply [V] 24 Max. Current carrying capacity inputs total [mA] 1600 Input current limit [mA] 200 Short circuit protection digital inputs yes Short-circuit protection digital inputs yes Overload resistance digital inputs yes Outputs Number of digital outputs 10 Circuit PNP Current carrying capacity per output [mA] 200 Short circuit protection yes Galvanically decoupled no Actuator supply of the outputs 24 V DC Interfaces Communication interface IO-Link Ethernet Transmission rate 10; 100 Protocol EtherNet/IP; Modbus TCP IO-Link master Transmission type COM1 (4.8 kBaud); COM2 (38.4 kBaud); COM3 (230.4 kBaud) IO-Link revision 1.1 SDCI standard IEC 61131-9 Number of ports Class A 8 Environmental conditions Ledpfx Ajh N U Susnceaa Ambient temperature [°C] 0...70 Storage temperature [°C] -20...70 Max. permissible relative humidity [%] 95 Protection class IP 20 Approvals / tests Shock/vibration stress EN60068-2-6; EN60068-2-27 Mechanical data Weight [g] 404,5 Dimensions [mm] 105.3 x 45.2 x 113.6 Materials Housing: PA Displays / Controls Display Switching status LED, yellow Operation LED, green Error LED, red Function LED, yellow Remarks Packaging unit 1 piece Electrical connection Screw terminals: ; Grid dimension: 20 mm

Year of construction: 2024, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2024 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 swivel wheels with brakes Fully enclosed machine (compliant with 2006/42/EC) Access secured by coded magnetic sensors Lajdpfjy D Ugyjx Ancja Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Convoyage : Tapis d’entrée - Bande NEOBELTING silicone blanc - Température max : 90°C en continu - Vitesse : 17 m/min - Motorisation : 0,37 kW – triphasé 400V - Option fournie avec la machine : guidage produits par peigne inox + rouleaux presseurs (voir photo) Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - Hardened and ground steel blades (Z30C13 – 40/42 HRC) - Rotation speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit options: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Laminating / rolling function - Hollow stainless steel roller, Ø140 x 350 mm - Motor: 0.12 kW - Speed: 29 m/min - Precise gap adjustment (1 to 30 mm) - Adjustable anti-clogging scraper Conveyor system: Intermediate conveyor - HABASIT belt, type WVT-140 - Speed: 29 m/min - Motor: 0.18 kW - Stainless steel drum, Ø44 mm - Tension and position adjustment Power supply: Three-phase 400V – 50 Hz SIEMENS G120C frequency converters (x5) SIEMENS 7-inch operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Technical documentation available

Year of construction: 2021, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2021 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Conveyor: Inlet conveyor - White silicone NEOBELTING belt - Maximum temperature: 90°C continuous - Speed: 17 m/min - Motor: 0.25 kW – three-phase 400V - Product guidance via stainless steel comb Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – additional blades can be fitted - Rotational speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit available: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function - Non-motorised hollow stainless steel roller, Ø140 x 350 mm - Gap adjustment: manual - Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Lodey Dvpvepfx Ancoaa Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: used, functionality: fully functional, spindle bore: 102 mm, center height: 400 mm, turning length: 2,000 mm, 26 spindle speeds from 4.5 to 1400 rpm - powered top slide - rapid traverse - 400 mm Forkardt chuck Lasdpfx Aoy D H Rwsncsa

Year of construction: 1967, condition: used, LatheFabr. Weipert Lsdpfxeh Rwkle Anceaa Type W500 turning diameter 500 mm Turning length 1000