Used Inspection Bath Thermostat for sale (16,857)

Condition: excellent (used), Julabo Julabo Transparent Circulating Bath Thermostat CT 72/P incl. ED Thermostat Item Description: For sale is a Julabo transparent circulating bath thermostat CT 72/P with Julabo ED (v2) temperature controller. This unit comes from a laboratory inventory and is in used but technically fully functional condition. The bath heats and controls temperature accurately and stably, and circulation is present (see photos). Ideal for laboratory, industrial, educational, testing, or development applications. Technical Data (excerpt) Manufacturer: Julabo Labortechnik GmbH (Made in Germany) Model: CT 72/P with ED thermostat (v2) Bath temperature range: approx. +10 °C to +60 °C Temperature stability: ±0.02 K Heating capacity: 2000 W at 230 V Gusdpfx Anezix Dqogsh Circulation pump: Flow rate approx. 15 l/min Bath volume: approx. 18 liters Bath material: Acrylic glass / stainless steel Interface: RS232 Power supply: 190–253 V / 50–60 Hz Protection class: I / IP20 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications and data are subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Condition: used, Year of construction: 2011, SMC Deutschland GmbH Temperature Control Bath, Water Cooled, INR 244 713D Model: INR244713D Guedex I Al Ejpfx Angjh Condition: Used Technical Specifications: Thermo-Con 220-230VAC 50/60Hz General Information: SMC Thermo-Con Temperature Control Unit (TCU), removed from ASML Yieldstar S-200B. Cooling/temperature regulation (MCW/PCW) for optics, electronics, sensor applications ASML 4022.639.27493

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Guodpsxhfl Eefx Angjh Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT Gusdpjz En Axsfx Angoh FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, Year of construction: 2011, working width: 1,300 mm, workpiece height (max.): 50 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum workpiece thickness: 50 mm Number of working areas: 2 Number of controlled axes: 3 Drilling units Number of drilling units: 4 Drilling unit 1: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 2: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 3: Bottom Horizontal drilling spindles in Y-direction: 42 Drilling unit 4: Bottom Horizontal drilling spindles in Y-direction: 42 Milling units Number of milling units: 2 Milling unit 1: Top Controlled axes: 3 Motor power: 6.6 kW Milling unit 2: Top Controlled axes: 3 Motor power: 6.6 kW Sawing units Number of sawing units: 2 Sawing unit 1: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Sawing unit 2: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Gsdpfsz Ekggex Angouh EQUIPMENT Albatros machine programming software Collets for workpiece clamping The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5446

Condition: used, This listing is for a Nickel Electro Clifton Unstirred Thermostatic Bath. The unit is in full working condition and is ready for immediate release. The Nickel Electro Clifton Water Bath is a highly reliable and digital unstirred water bath designed for precise immersion of flasks, bottles, and racks in a stable temperature environment. Ideal for laboratories that require consistent heating for various applications, this water bath offers exceptional temperature control and user-friendly features. Key Features: Stable Temperature Environment: Provides a highly stable temperature range from 5°C to 99°C, making it suitable for various laboratory applications. Digital Temperature Control: Equipped with a digital LED display for easy monitoring and precise temperature adjustments via a push-button interface. High Accuracy: Achieves temperature accuracy of ±0.2°C, ensuring reliable results for sensitive experiments. Gjdsxx Aa Iopfx Angouh Uniform Temperature Distribution: Features a temperature uniformity of ±0.1°C for consistent heating throughout the chamber. Durable Construction: Made from stainless steel, ensuring corrosion resistance and longevity even in demanding laboratory environments. Anti-Bacterial Finish: The painted surfaces are treated with an anti-bacterial finish, promoting a safer working environment. User-Friendly Indicators: Illuminated on/off switch and heater indication lamp provide clear visual feedback on operation status. Versatile Accessories: Optional lid or layer of polypropylene spheres can be added to reduce evaporation and minimize contamination during experiments. Specifications: Temperature Range: 5°C to 99°C Temperature Accuracy: ±0.2°C Temperature Resolution: 1°C Temperature Uniformity: ±0.1°C Chamber Material: Stainless Steel Display: Digital LED Controller Type: Push Button Certifications/Compliance: CE Approved Dimensions (D x W x H): 332 x 361 x 290 mm (model dependent) Weight: 7.6 kg (model dependent) Wattage: 1000 W (model dependent) Frequency: 50/60 Hz

Condition: used, Year of construction: 2008, number of axes: 3, working width: 1,300 mm, working length: 3,200 mm, TECHNICAL DETAILS Working area, X-axis: 3,200 mm Working area, Y-axis: 1,300 mm Number of controlled axes: 3 Total number of drilling spindles: 36 Guedpfoz Ekchjx Angeh Tool change stations: 10 MACHINE DETAILS Power of main electric spindle: 11 kW EQUIPMENT Type of machining: Drilling and milling The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7468

Condition: used, Year of construction: 2018, machine/vehicle number: 810591Q, power: 4 kW (5.44 HP), workpiece height (max.): 45 mm, TECHNICAL DETAILS Maximum workpiece thickness: 45 mm Minimum panel height: 10 mm Maximum panel height: 45 mm Edge banding unit: 1 Gedpfx Anez Ekbwegouh MACHINE DETAILS Total installed power: 4 kW EQUIPMENT CE conformity Glue reservoir: For hot melt adhesive The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 7247

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Gusdpfoz Ekbksx Angoh Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: used, Year of construction: 2004, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, workpiece length (max.): 1,300 mm, edge thickness (max.): 20 mm, feed rate X-axis: 40 m/min, The machine has the following configuration: Gluing Gluing system: EVA Adhesive application: single-sided and double-sided Scoring saw Motor power: 2.2 kW Speed: 6,000 min⁻¹ Profiling unit Motor power: 6.6 kW Speed: 6,000 min⁻¹ Cross-cutting saw unit Number of motors: 2 Edge trimming unit, top and bottom Number of motors: 2 Motor power: 1.85 kW Speed: 12,000 min⁻¹ Edge rounding unit Number of motors: 2 Motor power: 1 kW Speed: 12,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Belt sanding unit Motor power: 2.2 kW Belt sanding unit Motor power: 0.75 kW Brushing unit Motor power: 0.75 kW Brushing unit TECHNICAL DETAILS Workpiece length: 280–1,300 mm Workpiece width: 320–2,800 mm Workpiece thickness: 8–60 mm Edge thickness: max. 20 mm Feed speed: max. 40 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Chain conveyor with drive shoes Pressure bar with rubber belt Edge heating lamps Roller magazine Hot-melt adhesive tank Hot-melt adhesive pre-melter Guedpoz Ekczsfx Angjh Edge pressing unit with 9 pressing rollers CE-compliant The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Condition: used, Year of construction: 2014, Overview Complete 10 hl craft brewery around an Eco Brew Tech 10-20 HL steam-heated two-vessel brewhouse from 2014. One package from milling to bottling: malt mill, brewhouse with wort cooling and oxygenation, hot and cold water tanks, steam generator, three 20 hl unitanks, filtration, an atmospheric filler-capper monoblock, a self-adhesive labeller and a microchiller. 10 hl of cast wort per brew at 12.5 °P, up to 4 brews in 24 hours. Technical data - Brew length: 10 hl cast wort at 12.5 °P; 20 hl in 12 hours, up to 4 x 10 hl per 24 hours - Brewhouse: 2 vessels, AISI 304, steam-heated, PLC with touchscreen and recipe memory - Fermentation: 3 x 20 hl unitanks, AISI 304, 0.49 bar Guodpfxoz Sk Aqj Angsh - Bottling: 800-1,000 bottles/h, crown cap - Year: 2014 (microchiller 2018) Scope of Delivery - Malt mill | Robix | ROPPI-1100 | two fluted rollers, adjustable and lockable gap, protective magnets, 1,100 kg/h, 4.8 kW, 400 V / 50 Hz - Brewhouse | Eco Brew Tech | 10-20 HL | mash/lauter tun 1,557 L gross with false bottom, grant, sparging and 1.1 kW bidirectional rake with variable speed; kettle/whirlpool 1,890 L gross with tangential inlet and bottom steam jacket; rock wool insulation, platform and stairs | 2014 - Wort pumps | 2 sanitary pumps for hot and cold wort, 2 kW and 3 kW - Water mixing station | hot and mains water, flow meter and in-line thermometer - Plate heat exchanger | AISI 316 plates, NBR gaskets, wort cooling with hot-water recovery - Wort oxygenation | in-line, porous stone, flow control valve, outlet thermometer - Hot water tank | Eco Brew Tech | HWT | 20 hl working (2,869 L gross), steam jacket, PT100 thermostat, 0.75 kW pump 80 L/min, 24 L expansion vessel | 2014 - Cold water tank | Eco Brew Tech | CWT | 20 hl working (2,869 L gross), glycol jacket, PT100 thermostat, 0.75 kW pump 80 L/min | 2014 - Steam generator | Thermindus | GV INSIEME | 150 kg steam/h, diesel burner, feed-water unit and boiler control panel | 2014 - Unitanks, 3 units | Eco Brew Tech | 20 hl working (2,731 L gross) each, AISI 304, 0.49 bar, 2 independent cooling jackets (side and cone), PT100, pressure gauge, safety valve, CIP spray ball | 2014 - Mixing tank | Eco Brew Tech | 2,200 L, AISI 304 | 2014 - Mobile pump on trolley | 1.5 kW, 200 L/min at approx. 15 m, AISI 316 pump, AISI 304 trolley, for CIP and beer transfer - Cartridge filter | AISI 304 housing, up to 2,000 L/h, cartridges not included - Process pump | EP MINI | 0.37 kW, 3/4" connection - Filler-capper monoblock | Idrotecnica | I8C | atmospheric filling, crown capping, 800-1,000 bottles/h | 2014 - Self-adhesive labeller | STS | S2/Z | automatic, 1,000 bottles/h, batch coder | 2014 - Microchiller | Keyter | KWF2009 | process cooling | 2018 Condition Used, still installed. Inspection on site is possible. Availability Immediately. Location: Spain.

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. Gjdpfx Anjzmqv Hsgjuh It was operating 2-4 hours during test run. The whole system is in new state.

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Gjdpfxoz En Afe Angeuh Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: used, Year of construction: 2000, working width: 1,000 mm, workpiece height (max.): 180 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 1,000 mm Minimum workpiece thickness: 3 mm Maximum workpiece thickness: 180 mm Type of processing: Grinding and finishing Number of processing units: 2 Gedpfoz Ekiusx Angjuh Processing unit 1 Design: Combined roller-pad unit Roller: Rubber roller Processing unit 2 Design: Pad unit Pad orientation: vertical The machine will be sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6385

Condition: used, IKA LR 2000 V Laboratory Reactor For sale is a professional, modular IKA LR 2000 V laboratory reactor system in immediately operational condition. This configuration is the ideal workhorse for product development, simulation, and small-scale production (e.g., in the fields of cosmetics, pharmaceuticals, chemistry, or food technology). Thanks to its vacuum capability and the combination of an anchor stirrer and a high-performance disperser, the system is perfectly suited for the production of stable emulsions, creams, and lotions. Gsdpfx Asz I Szwengeuh Here you receive a complete, ready-to-use system. The expensive double-walled glass vessel with a bottom outlet, the heating bath with a temperature sensor, and the Ultra-Turrax T25 including shaft are already included in the package. You save yourself the trouble and the cost of purchasing individual components, which would amount to thousands of euros! Scope of delivery & technical components: Reactor vessel: Double-walled 2.0-liter vessel made of high-quality borosilicate glass 3.3. The jacket enables precise heating and cooling via external thermostats. Equipped with a practical bottom outlet valve for clean emptying. Mixing tools: Integrated anchor stirrer for optimal removal of material from the vessel walls when processing viscous substances, as well as a suitable flow breaker to prevent vortex formation and ensure perfect vertical mixing. Dispersing unit: IKA ULTRA-TURRAX T25 including a suitable dispersing shaft. Enables highly effective homogenization and comminution directly during reactor operation. Drive & control: Robust IKA control unit RE 162 P for powerful stirring even at low speeds. Temperature control: Water bath LT5 control including an external temperature sensor. The sensor measures the temperature directly inside the reactor medium, which enables highly precise control via the water bath. Accessories: Complete stand system for the secure mounting of all components, as well as all necessary holders. Note: The sale does not include software for controlling the system. The system can be fully, independently, and easily controlled directly via the hardware controls. "All from one source: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Metal detector on its own conveyor This Lock MET 30+ by Lock Inspection Systems (England) checks products for metal particles as they pass through the detector head on the belt. The detector sits on its own frame with a modular plastic belt and castors, so it is easy to place in a line. Product settings are selected with the keys on the display; one of the stored programmes is for tomatoes. The serial number and year of manufacture have not been filled in on the rating plate, so they are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Metal detector with conveyor Guedpfxez Nc S Ao Angsh Belt: Modular plastic belt Controls: Display with selection keys, stored product programmes Construction: Stainless steel, frame on castors

Condition: used, Year of construction: 1984, functionality: fully functional, power: 4.2 kW (5.71 HP), inner dimension length: 5,300 mm, inner dimension width: 750 mm, inner dimension height: 620 mm, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, We are offering this used Lauber I S-6 chamber dryer for drying wood, manufactured in 1984. Dimensions of the stacking chamber: 530 cm long, 62 cm high, 75 cm wide, 2.4 cubic meters, 4.2 kW. Cabinet with side carriage: complete dryer with carriage, high-performance radial fan, electric heating, intake and exhaust flaps, safety thermostat, spraying device, sufficient number of corrugated stacking strips, access doors, internal rails made of aluminum casting, external rail with plastic coating, manual control type A, built-in measuring unit with two wood moisture sensors and one climate sensor. Fully automatic temperature and climate control of the entire drying process according to the pre-selected drying gradient, with two wood moisture sensors and one wood equilibrium moisture sensor. If you have any questions or require further information, please send us a message or call us. Inspection is welcome. Sale only to buyers who collect the item themselves! The sale is made with the exclusion of any warranty. Gedpfx Ajz Alhisngjuh

Condition: used, This listing is for the Thermo Haake SC100 Water Bath + Immersion Circulator. The unit is in full working condition and ready for immediate use. Thermostatic water bath with integrated immersion circulator, designed for accurate temperature control in research and industrial labs. Ideal for sample incubation, heating, and fluid temperature regulation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Gjdpfx Ajy H Dlqongeuh • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, General Description: Godpfx Ajyw Nicsngjuh This listing is for the Grant Instruments TXF200 Circulating Bath. The unit is in full working condition and ready for immediate use. This high-specification stirred thermostatic bath offers precise temperature control and an intuitive digital interface. Designed for versatility, it supports both internal and external circulation, making it ideal for calibration, cooling, and general laboratory heating tasks. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Gusdpfxjztyxdo Angsh Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: used, Lauda bath circulator thermostat - Side panel missing, sides slightly dented Guodsw Un I Dspfx Angjh - Shipping available at extra cost

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Serial number: RTR/124 Model: RTR160UF Gujdpfszl Scrox Angsh X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: M0335, Cyril Bath type 20 T Hydraulic Swing Arm Profile Stretch Forming Machine year 1997 serial number M0335 capacity 20 t engine power 126 kW electric connection 400 V Guedpfx Ajqcu Acengsh description With control Cyril Bath Monitor Type: Flexscan 685 12 CNC axes 4 auxiliary axes Stretching force 20–200 kn Bending angle 2 x 95 degrees Rotation stretching cylinder 2x –45/225 degrees Component length from 762 to max 3810 mm Hydraulics from Rexroth with 2 x hydraulic pumps: 45 kW each Various spares available

Condition: like new (used), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, total length: 1,330 mm, total height: 1,028 mm, total width: 568 mm, Heat and dry a large hall, greenhouse, workshop, storage room, or construction site for extended periods without interruption for refueling. This low-usage APEX BGO-80B delivers 80 kW of heating output and comes with a complete 1000-liter external tank system, including a certified steel containment basin, for long run times between refills. The integrated 69-liter tank is sufficient for shorter jobs. Approximately 200 operating hours; manufactured 01/2026; thermostat-controlled automatic operation. Only one unit available – once sold, it's gone. Pickup and transport options are limited. Best suited for: heating and drying large halls, workshops, greenhouses, storage rooms, and construction sites that require extended operation without refueling. Not suitable for: enclosed spaces without an exhaust connection or living areas – indirectly fired, vented through the Ø150 mm chimney. What the specifications mean in practice: • 80 kW heating output – heats large halls and open work areas, not just a small corner. • 1000L external + 69L internal tank – extended run time with significantly fewer refills. • 2,000 m³/h airflow – distributes warm air across a wide area. • Thermostat + digital display + 10m external room thermostat – automatic operation. • Indirect firing, Ø150mm chimney – combustion gases are vented outside, ensuring clean air for drying. • Large-wheel chassis – can be easily repositioned by one person. The complete package includes: heater with digital thermostat and removable chimney, external room thermostat (10m cable), 1000L tank with EAGS-certified steel containment basin (mfg. no. 199890), and 2 oil-resistant connection hoses. Technical data: – Model: APEX BGO-80B (Type 56217) – Heating output: 80 kW / 68,800 kcal/h – Fuel: Diesel/heating oil – Consumption: 7.5 l/h – Mains voltage: 230V~50Hz – Fan motor: 900W – Blower output: 2,000 m³/h – Blower outlet: 340mm – Chimney: Ø150mm – Internal tank: 69 l – Dimensions: 1330x568x1028mm – Weight: 59 kg – Manufactured: 01/2026 – Protection: IPX4 Condition: Well-maintained, ~200 operating hours, fully functional. Location: Stanserstrasse 50, 6064 Kerns (self-pickup; transport available upon request). Buy with confidence: manufactured 01/2026, only ~200 hours of use, used by us for hall heating/drying, fully functional, and a test run is possible before pickup. Nameplate photos and a running video are available; in-person inspection is possible in Kerns OW by appointment. You may verify the identity, condition, and operation before payment – we guarantee that the machine is as described, complete, and functional upon inspection. Why buy now: a single used unit is available; this is not stock. Once sold, this configuration (heater + tank + certified basin, sold together) will not be available again. First-buyer bonus: a free functional test run before pickup, with the tank connected and the thermostat set to your desired temperature, at no extra cost. Valid until October 10th, 2026. Action: send us your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate. Gedszrwapjpfx Angeuh

Year of construction: 2018, condition: used, Roll production line König Artisan SFC Year of manufacture: 2018 Condition: cleaned & inspected Suitable for the production of ciabatta and square rolls Hourly output: max. 300 kg of dough Dough belt height: min./max. 12mm/32mm, depending on the dough Dough belt width: 170 mm Dough belt flouring system for the top and bottom Guillotine and punch for a wide range of products Guedpfjz A Shaex Angjh Touch panel with recipe management Proofer with water bath, type: MOC-C300 Includes 3 cutting rollers for 1 to 4-row operation Includes 1 punching tool of your choice, subject to availability