Used Industrial Nonwoven In-Line Slitter Wind for sale (47,045)

Year of construction: 2020, condition: like new (used), functionality: fully functional, The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP. Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream in Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials Winding design: Surface driven Production speed: 200 m/min Web threading speed: 10 m/min Cross-cutting system: Circular knife Longitudinal slitting system: Band counter-knives on a motorized expanding shaft Number of slitting units: 12 Edge-trim extraction: Yes Number of shafts: 4 Shaft diameter: 3″ Drive system: AC motors Motorized S-wrap: Yes Motorized SUS supporting roller: Yes Shaft supports: Yes Bar acceleration mechanism: Yes Roll holder: Yes Drive side: Left Operator side: Left Control cabinet side: Left Operator panel colour: RAL 7035 Control cabinet colour: RAL 7035 Length: 6200 mm Width: 5550 mm Height: 3045 mm Total weight: 16,000 kg Supply voltage: 400 V Number of phases: 3 Auxiliary AC voltage: 230 V DC control voltage: 24 V Frequency: 50 Hz Power supply earthing system: TN Protection rating of power cabinets: IP55 Electrical reference standard: IEC 60204-1 Cable entry into cabinets: From below PLC communication: Profinet Field communication: Ethernet TCP/IP PLC software: TIA Portal Operator computer: Desktop computer with monitor Compressed-air pressure: 6 bar Air consumption during web threading: 4500 Nl/min Air consumption during normal operation: 700 Nl/min Air consumption during the change cycle: 2000 Nl/min Cable routing: In floor ducts Operating temperature: +15°C to +40°C Storage temperature: +25°C to +55°C Relative humidity: Below 80% Maximum operating altitude: 1000 m Equivalent continuous sound pressure level LEQ: Below 85 dB A-weighted sound power level LWA: Below 83 dB Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information. Ijdpfx Ahezudfdoyeih

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information Iiodpsz Rnu Tjfx Ahysh • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. Iedpfjy Uk A Sjx Ahyjih SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: used, Year of construction: 2021, Technical details: voltage: 400/50 V/Hz air-pressure connection: - bar control: - capacity: 150 kg/h protection class: IP 20 Iodpfxsy N R Hmj Ahysih temperature range: 0 - 40 °C sound level:

Condition: used, Year of construction: 2020, functionality: fully functional, AL-2400 mm SS PP Spun-Bond Machine Line ( Filament 1.5D-1.8D ） -Raw Material： Polypropylene granule，master batches，additive -Production Process: With high temperature filament drawn, certain proportion of polypropylene, master batches and additive are drawn into net by negative pressure, which are boned together being into fabric by calender. -Annual Output: 4800 Tons/Year（30gsm） Isdpfezlg Iijx Ahyeih -Fabric GSM: 9-60 g/m2 -Installed power: Around 1500KW

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Iiedpezgayuofx Ahyoh Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Isdszzzm Ejpfx Ahyeih Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system.

Condition: excellent (used), Year of construction: 2014, Ref:11125 . Fotoba XLD 170 + Fotoba REW 104 Slitter Rewinder. 2013 Fotoba XLD 170 High speed cutter. Primarily used for digitally printed wallpaper up to a maximum thickness of 0.8 mm. Including polycarbonate, photo paper, vinyl, self adhesive vinyl, PVC, film, Duratrans, TDF, canvas, laminated or encapsulated prints, etc. Using cut marks generated by the RIP and with 'True Image Edge Tracking', the cutting is executed with precise accuracy. The sensor automatically follows the prints. Extremely easy roll loading. 'Digitrim' function enhances the versatility of the XLD 170. Features & specification: Self squaring to the edge of the image 'X' Automatic tracking of the image edge 'Y' Memory channels to store different cut marks. Iedozmx Nuepfx Ahysih All mechanisms controlled by stepper motors. Self sharpening knife system. Vertical slicers; single 8 mm double or adjustable double. Adjustable cutting lengths & quantities - accuracy +/- 1 mm (0.039") Max. linear speed: 18m / 50ft. Cutting width, Max: 170 cm (67") Min: 28 cm (11") Max. load 200kg (440 lbs), max. diameter 60 cm. 2014 Fotoba REW 104 Automatic in-line coreless rewinder. Made for non-stop industrial production. Can rewind two rolls simultaneously up to 20m long. Can wind up tiles of the same job for better logistic. Maximum roll diameter: 90 mm Maximum rolled weight: 8 kg

Year of construction: 2008, condition: used, Offered for sale is a slitter rewinder with rewinding and unwinding units. Roll width: up to 1060mm. Additional technical specifications: Processable grammage: 60-173g/m², maximum unwind width: 1060mm, maximum parent roll diameter: 1200mm, maximum parent roll weight: 600kg, parent roll core inner diameter: 70mm, rewinding width: 530-1060mm, maximum rewind diameter: 250mm, finished roll core inner diameter: 51mm. Control system: Electronic machine control system with operator panel and OMRON F7 frequency inverters. Equipped with roll unwinding unit, deflection and guide rollers, slitting unit, rewinding unit, safety guard and separate electrical cabinet. Inspection possible by arrangement. Ijdpfx Ahoz N E Uzjyoih

Condition: ready for operation (used), Year of construction: 1997, year 1997, speed: 500 m/min, roll dimension: 450 – 1550 mm, Iodjxwp Uvopfx Ahyoih Max diameter of unwinding roll 1500mm Max width 1300 mm Min width 380mm Brakes - hydraulics and disc brakes Max weight of unwinding roll - 2000 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3769, total width: 1,667 mm, roll diameter: 1,067 mm, overall weight: 1,360 kg, product width (max.): 1,067 mm, input voltage: 460 V, ROTARY SHEAR SLITTING STATION: The rotary shear slitting station is a modular design allowing detachment from the main frame. The powered 60mm (2.367 inch) diameter upper and lower knife shafts drive the male and female shear knife assemblies. The male and female shear knife assemblies may be positioned anywhere within the web area and are held in position by eccentric locking keys. The removable male shear knife shaft assembly is mounted to a rigid dovetail bar assembly. The dovetail bar assembly is adjustable axially for shear knife face contact pressure and rotationally for knife overlap. A two-position lock lever assembly is used to rotate the dovetail bar assembly 900to the open position for removal of knife shaft assembly or closed in the slitting position. Rotary shear drive speed is proportional to web speed or manually controlled by the operator. REWIND: The slit web is alternately rewound on the duplex air expanding rewind shafts. Flange mounted rewind shafts provide ease of change to other desired types or diameters. The outboard rewind support swings open for removal of finished rolls from the cantilevered rewind shafts. Isdpfx Ajy Ufgxehysih

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable Iiodoz E S Hhopfx Ahyjh • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1,200 units per shift! Iodpfxezxgmrs Ahysih TECHNICAL DETAILS Production capacity: 150 pcs/h MACHINE DETAILS Electrical data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra / Thin frame machine i-3 – CE version Warm-edge spacer production system Production of Intercept ULTRA stainless steel, ThinPlate or BlackLine

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Iijdozylxijpfx Ahyjh Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: VD 07.08.469, type of input current: DC, We are selling our Kallfass shrink tunnel. The display is defective, but the rest of the machine is fully functional. Ijdpfjy Snw Iex Ahysih Feel free to call if you have any questions.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans Iisdpfjxw Ux Hox Ahysh supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: excellent (used), Silverson 275 LS High Sheer In Line Mixer / Homogenizer 1.5" Inlet & Outlet 3 ~ Iiodpjym Akksfx Ahyjh Removed from the stores of a pharma plant in Cork, Ireland. Device is in excellent condition.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Trotec SpeedMarker 156Wx Industrial Laser Marking System Brand: Trotec Model: SpeedMarker 156Wx Type: Industrial Laser Marking System Application: Permanent marking, engraving and identification of industrial components Available for sale is a Trotec SpeedMarker 156Wx, a professional industrial laser marking system from Trotec Laser. Iijdpfx Asz Hzvhehyoh The SpeedMarker series is designed for high-quality, permanent marking and identification of a wide range of industrial components and products. It is suitable for applications including product identification, serial numbers, barcodes, QR codes, logos, text, part numbers and traceability markings. The SpeedMarker 156Wx is particularly suited to industrial and manufacturing environments where accurate, repeatable and permanent marking is required. Typical Applications: - Industrial component marking - Serial number and part number marking - Barcode and QR code marking - Logo and branding - Product identification - Traceability marking - Metal component marking - Engineering and manufacturing applications - Tool and equipment identification - Permanent asset marking Device was removed from IMA manufacturing line that was never commissioned. Marking system is in "as new" condition. Sold as seen in images.

Year of construction: 2014, condition: good (used), DT250 Slitter / Rewinder Year of manufacture: 2014 Machine type: Tabletop slitter rewinder for narrow web label materials Condition: Used – in good working condition Technical Data Maximum web width: 254 mm Maximum unwind diameter: 450 mm Maximum rewind diameter: 360 mm Rewind shafts: 2 × 76 mm 1 × 40 mm Slitting system: Rotary shear slitting with knife holders Accessories and Tooling Spare slitting knives included Core adapters included Machine Dimensions Length: approx. 1300 mm Depth: approx. 700 mm Height: approx. 600 mm Application The Daco DT250 is designed for finishing self-adhesive label materials and is ideally suited for digital label production environments such as HP Indigo, Konica Minolta AccurioLabel, Xeikon, and similar presses. Typical applications include: - Slitting wide master rolls into multiple narrow label rolls - Rewinding and roll inspection Ijdpfxsyt H R Is Ahyjih - Production of finished label rolls for customers - Converting digital label print jobs into finished products Advantages of this Machine - Compact and space-saving tabletop design - Ideal for small and medium-sized label converters - Reliable and user-friendly operation - Suitable for a wide range of self-adhesive label materials - Cost-effective finishing solution for digital label production

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 4743, New S-DAI Industrial Zipper Sealing with In-Line Folding Machine Industrial film-processing system manufactured by S-DAI Industrial Co., Ltd., Taiwan, designed to combine film handling/folding with zipper feeding, positioning and sealing in an integrated machine. The equipment is new/unused. Original machine drawings, manuals and supporting technical documentation are available. Folding Section 2 HP AC servo-driven material unwind Dancing roller Unwind-diameter monitoring Laser sensor Controlled web handling and folding system Zipper Sealing Section V-board moving device EPC (Edge Position Controller) Air shaft PLC control box Motor-driven zipper unwind Dancing rollers for zipper and material Zipper sealing device with cooling 2 thermal/temperature controllers Infeed rubber roller with 1/2 HP motor Nip roller with 1/2 HP motor Iiodpfx Ajz Aak Eshyoh Electronic controller Material-empty and zipper-empty warning signals Machine start/stop signals Zipper tape unwind gear ratio: 10:1 Additional Unwind / Tension-Control Equipment Extra unwind air shaft Low-tension unwind system 1/2 HP infeed motor and inverter Infeed roller SICK ultrasonic diameter monitoring Dancing roller 2 guider-roller sets Distance-checking laser Associated program design Condition: NEW / UNUSED Documentation: Original drawings, manuals and supporting technical documents available.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1090, The TB6/SB MOD 140, manufactured by Giani F.lli L. & G. s.n.c. (Italy), is an industrial slitter machine designed for longitudinal cutting of film, paper and packaging materials. The machine features a robust construction and reliable cutting performance, making it suitable for continuous industrial operation. Ijdpfeyghn Iox Ahysih It is commonly used in converting, packaging and film processing industries where precise cutting and stable material handling are required. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Giani F.lli L. & G. s.n.c. (Italy) • Machine type: Slitter / longitudinal cutting machine • Model: TB6/SB MOD 140 • Serial number: 1090 • Year of manufacture: 2007 • Certification: CE compliant • Application: film, paper and packaging materials

Condition: used, Industrial shredder or shredding line with carbide blades for shredding various materials such as wood, cardboard, glass fibre mats or similar, e.g. as a pre-treatment for recycling processes. The plant consists of two feed conveyors, the shredder, a transport fan and a soundproof enclosure. Iiodezrx Hdopfx Ahyoh Technical data: - Total power: 31.7 kW - Shredder motor: 7.5 kW - Feed width: 550 mm - Feed height: approx. 25/75 mm - Fan: 22 kW / 10,800 m³/h

Condition: used, Year of construction: 2012, Assembly of : 3x 4 head welding Soenen Q4 machines on 1 chassis 2 head automatic cleaning machine Soenen BFP Duplex Iodpoz A D E Defx Ahyeih Robot Soenen MOS for automatic hinges automatic transfer table

Condition: good (used), Two Complete Industrial Powder Coating Lines – For Sale | Facility Rental & Contract Powder Coating Available Iisdszx D Adepfx Ahyeh Two complete conveyor-based industrial powder coating lines with multi-stage pretreatment and associated equipment, suitable for aluminium and steel components: Line 1: max. workpiece size 650 × 1,650 × 3,000 mm Line 2: max. workpiece size 550 × 1,100 × 2,000 mm – a modern, high-capacity powder coating line, designed for efficient industrial production and larger production volumes. Both lines are currently installed in Hungary and are available for inspection. If you purchase a powder coating line, you can also rent the production facility where the line is currently installed. This means the line can remain in its current location and production can continue there. We also have available powder coating capacity and welcome enquiries for contract powder coating services. We are happy to provide quotations based on your products, quantities and coating requirements. Interested in purchasing a complete line, renting the production facility, or looking for a reliable powder coating partner? Contact us for further details and a quotation.

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Iodpfx Ahsz Eg Awoyoih Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials