Used Hydraulic Guillotine Shear, Sheet Metal Shear, Sheet Metal Guillotine Shear for sale (46,276)

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Itsdpfxst Ac D Uo Akxsf Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Itjdpetvb Iuefx Akxjf Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm Itjdpfxeq A I Ups Akxsf - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm Itjdpfx Akoumpq Nsxsf - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: used, Swing cut guillotine shears KÖLLSCHEN type BSK 2000/2 No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Iedpfx Akeifu Anoxstf Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet holder - Manual back gauge 500 mm - fence adjustment via 2 handwheels, at the rear on the back gauge guide with scale - front side stop left 720 mm - electric foot switch - manual central lubrication - Control cabinet on the machine - Machine stands on 4 swinging elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition

Condition: used, Guillotine shear, sheet metal guillotine DIGEP type OL 3 Workshop-refurbished guillotine shear Serial no.: 1312 Year of manufacture: 1977 Cutting length: 1250 mm (nominal cutting length) Max. cutting length: 1300 mm Cutting thickness at 450 N/mm²: 3 mm Itjdpfx Aslpkcnokxef Simple backgauge: 500 mm Frame depth: 200 mm Cutting angle: 2° Strokes at full cutting length: max. 50 strokes/min Working height: 860 mm Motor power: 2.2 kW Main connection: 380 Volt, 50 Hz - LED cutting area lighting - Simple backgauge with manual adjustment - Mechanical foot switch - Front angular stop left - 1 piece front sheet support 300 mm Dimensions (L x W x H): 1660 x 1350 x 1200 mm Weight: 1600 kg Good condition

Condition: new, Year of construction: 2026, Heavy duty manual guillotine shear for trade and industry. With the manual guillotine shear GLT you can make the perfect cut with every job. the extending table makes it easier to guide large-sized metal sheets on the table Support table with graduation robust and compact steel construction high quality, durable steel knife extremely stable and heavy construction made of cast iron ground and hardened guillotine shears Back gauge system with Scala CE mark Declaration of conformity stable and robust construction for steel plates up to 1.2mm Working length 2050mm open design suitable for endless cuts large cast work table Lower storage compartment for storing sheet metal pieces in the price Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Passage: 8cm Price: 4650 euros marking template free! Ijdpocl D Hljfx Akxotf Delivery date: every week Contact what's app We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)

Condition: new, Year of construction: 2026, For sale is a new guillotine shear directly from the manufacturer Prod-Masz. Visit our website to see our other products. Guillotine shears manually 1500 / 1.5mm the working length: 1500mm to sheet steel up to 1.2mm, Weight: 400 kg We are looking forward to your contact! Isdpfscvqnysx Akxjtf The invoices are issued either with 0% of VAT as intra-Community delivery.

Condition: new, Year of construction: 2026, Heavy-duty hydraulic guillotine shear for universal use for trade and industry. With the hydraulic table shear GLT from Prod-Masz you can make the perfect cut with every job. - The extending table makes it easier to carry large-sized metal sheets on the table - Support table with graduation - robust and compact steel construction - high quality, durable steel knives - extremely stable and heavy cast iron construction - Ground and hardened guillotine shear knives - Back gauge system with Scala - CE approved quality - Declaration of conformity - for steel plates up to 1.2mm - Open design suitable for endless cuts - Max. Working width: 3000 mm - Motor power 2.2 kW - HL 46 oil - pressure force 4t - Operating pressure 120-150 bar - has hydraulic compensators from the cutter bar upwards Dimensions: Length: 3500 mm Ijdpjc I T E Tofx Akxjtf Width: 750 mm Height: 1150 mm Weight about 1000 kg We are looking forward to your contact! We issue the invoices with 0% (intra-Community delivery)

Condition: new, Year of construction: 2025, Hydraulic guillotine shears from Prod-Masz - with them you can make a perfect cut with every job! High productivity, precise execution and durable use! The pull-out table makes it easier to guide large-format metal sheets on the table Support table with scale Robust and compact steel construction High quality, durable steel knives Extremely stable and heavy cast iron construction Ground and hardened guillotine shears Backgauge system with Scala CE tested quality Declaration of Conformity For steel plates up to 1.2 mm Open design suitable for endless cuts Max. working width: 2050 mm Motor power: 2.2 kW Oil: HL 46 Pushing force: 4t Working pressure: 120-150 bar Iedpfx Aohuiv Tekxetf Has hydraulic compensators from cutter bar up Dimensions: length: 2500 mm / width: 750 mm / height: 1150 mm Weight: about 600 kg delivery every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1975, sheet thickness (max.): 13 mm, working length: 3,100 mm, TECHNICAL DETAILS Working length: 3,100 mm Sheet thickness: 13 mm Iedpfx Akoyyb Rkoxotf MACHINE DETAILS Operating voltage: 380 V Current: 37 A Control voltage: 220 V Frequency: 50 Hz EQUIPMENT Electric back gauge Adjustable cutting angle

Condition: good (used), functionality: fully functional, Year of construction: 1998, Hydraulic Guillotine Shear Make: HERA Model: TK 3000 x 10mm Year: 1998 Technical Data Brand: HERA Model: TK 3000 x 10 Year of manufacture: 1998 Sheet size: 3050 x 10 mm Passage: 3080 mm Cutting angle: 1-3° Working height: 900 mm Strokes per minute: 14 1//min Motor power: 15 kW Dimensions: approx. L 4.15 x W 2.96 x H 2.20 m Weight: approx. 8.5 t Equipment • Siemens Simatic OP7 control unit • NC-controlled rear gauge • Full-length folding finger guard • Angle stop • Ball rollers in the support table Itedpfsy Dr N Ejx Akxsf • Cutting line illumination • Support arms • Automatic cutting angle adjustment • Automatic blade gap adjustment • Operating manual All information subject to change and without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 2015, Very nice 4-meter Safan M shear Ijdoycwalopfx Akxjtf Type: M Shear 430 6 Capacity: 4300 x 6 mm High hold-down system Scrap flap system Return-to-sender system Year of manufacture: 2015

Condition: good (used), Year of construction: 1986, Max. working width: 4000 mm for sheets with tensile strength of 40 kg up to: 3 mm Table width: 470 mm Backgauge adjustment: 1000 mm Fixed cutting angle: 1°30' Itodjy A Eg Uepfx Akxof Frame throat depth: 200 mm Hydraulic drive: 380 V, 7.5 kW Required space: 4650 x 1830 x 1420 mm (height) Weight: 5.7 t

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 621307509, actuation type: hydraulic, controller model: Delem DAC-350, working width: 3,080 mm, sheet thickness (max.): 10 mm, TECHNICAL DETAILS Max. sheet thickness: 10 mm Max. working width: 3,080 mm Cutting speed: 20 mm/min MACHINE DETAILS Control: Delem DAC-350 Drive type: Hydraulic Power: 30.0 kW Dimensions & Weight Transport dimensions (L x W x H): 4,985 x 2,400 x 2,200 mm Weight: 11,500 kg Transport packages: 1 pc. EQUIPMENT Backgauge type: Electric Sheet support system: Pneumatic Finger guard: Fixed with flip-up safety guard Angle adjustment: Motorised Cutting gap adjustment: Motorised Table type: Ball table Documentation Itjdpfey Avu Nsx Akxjf CE marking

Condition: used, Year of construction: 1993, Guillotine Shear Manufacturer: LVD Model: MVSB 62/8 Year of manufacture: 1993 Iedey Atn Hopfx Akxotf Max. working length: 6,200 mm Sheet thickness: 8 mm Weight approx.: 13,000 kg ä16426

Condition: used, 5068 - Cutting machine, plate shear, scissors €1,500 In stock Itedpey Apu Nefx Akxef Cutting width: 3900 mm Overall dimensions: 4750 x 1450 x 2750 mm

Condition: excellent (used), functionality: fully functional, Manufacturer/Type: Wieger 10 / 30 Short description: Guillotine shear Description: Immediately available from location: Guillotine shear Wieger Type 10 / 30 Year of manufacture: 1991 Cutting length: 3100 mm Material thickness: 10 mm Frame throat: 300 mm Electric backgauge: 1000 mm Drive power: 11 kW Weight: 7500 kg Iodey D A I Eepfx Akxstf

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, Technical data: Maximum pressing force Working length between frames Horn length left + right Maximum horn load Total working length Throat depth Table width Ram width Maximum stroke Ram tilt adjustment (Y1/Y2) Rapid approach speed Return speed Working speed (approx.) Maximum distance between table and ram Rear stop (X) adjustment Rear stop (X) adjustment speed Backgauge height adjustment (R) Height adjustment travel of backgauge Backgauge height adjustment speed Adjustment of backgauge fingers (Z1/Z2) Adjustment speed Drive power Required oil filling Space requirements above floor Length: Width: Height (approx.) Weight (approx.) Press control - DNC 74 PS-Hydraulic Tool clamping: HKI/V-2 Lifting aid 1500 lg. with support consoles Tools: A4-T2-B-Sp 63 / A4-T3-M51 Die displacement with counter BLATT 631.00-1 KN mm 3150 3050 mm KN mm mm Ijdpfx Akoy D A Ixsxstf mm mm mm 3620 350 290 100 250 20 mm mm/sec. mm/sec. mm/sec. mm 90 . 75 0-8.5 593 0-700 mm mm/sec. 50 mm mm/sec. - mm/sec. - KW 30 1 420 mm mm 3900 2800 mm 3900 29500 Electric-hydraulic. Manufacturer/Type: Wieger 315 / 35 Short description: CNC press brake Description: Immediately available ex site: CNC press brake Wieger Type 315 / 35 Year of manufacture 1991 CNC control Cybelec Weight 28 t

Condition: like new (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 23708, power: 7.5 kW (10.20 HP), HACO TS 3006 Atlantic - Working length: 3050 mm - Mild steel capacity: 6 mm (400N/mm2) - Min. cutting angle: 0.5° - Max. cutting angle: 3.0° Itodpfx Aksy Dpzfjxef - Number of hold-downs: 18 - Strokes per minute at smallest angle: 14 - Strokes per minute at largest angle: 8 - Working height: 770 mm - Motor power: 7.5 kW - Total length: 3800 mm - Total height: 1750 mm - Total width without CE guard: 1650 mm - Total width with CE guard: 2700 mm - Control: SP9 Robosoft - Weight approx. 4500 kg

Condition: excellent (used), functionality: fully functional, Sheet width: 2,500 mm Sheet thickness: 4 mm Machine weight approx.: 5,000 kg Space requirement approx.: 3,000 x 2,000 x 1,700 mm Accessories/equipment: - Sheet holding device - Angle stop - 3x support arms Itsdpfx Asyz Rv Eskxof - Foot switch - Light barrier

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm Ijdsy Ddv Repfx Akxjtf - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Iedpfxsy Dddze Akxotf Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: used, functionality: fully functional, Year of construction: 1994, Hydraulic Guillotine Shear Make: SAFAN Model: VS 310-6 Year: 1994 Iedpfxjyzz Nve Akxjtf Technical Data Manufacturer: SAFAN Model: 310-6 Year of Manufacture:1994 Working Length: 3100 mm Sheet Thickness: 6 mm Motor Power: 11 kW Sheet Hold-Downs: 18 Cutting Angle: min. 0.5° / max. 1.5° Back Gauge: 1000 mm Dimensions: L 3.7 x W 2.0 x H 1.70 m Weight: 6.2 t Equipment • Back gauge 1000 mm • Manual blade gap adjustment • Automatic cutting angle adjustment • Cutting length limitation • 2 support arms • Cutting line illumination • Operating manual All specifications without guarantee. A demonstration can be arranged at any time in our showroom.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller model: E21S, stroke rate (max.): 10 1/min, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 10 mm, table height: 800 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 10,000 kg, total length: 4,050 mm, total width: 2,050 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, type plate available, HYDRAULIC GUILLOTINE SHEAR 10 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 10 mm Maximum cutting length: 3200 mm Blade rake angle: 1° 30′ Number of strokes per minute: 10 Back gauge travel: 600 mm (standard) Distance between side frames: 3450 mm Blade length: 3300 mm Table height: 800 mm Motor power: 15 kW Weight: 10,000 kg Machine dimensions (L × W × H): 4050 × 2050 × 1950 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Ball transfer units on the table Iodpfxjyt Itqs Akxjtf Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual in English Delivery to the customer is possible. Transport cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.