Used Hach Phm240 Radiometer Analytical Meterlab for sale (195)

Condition: used, This listing is for the Hach Radiometer Analytical MeterLab PHM240​ Kdsdpfx Ahjxv A Adobeu The unit is in full working condition and is ready for immediate use The Hach Radiometer Analytical MeterLab PHM240 is a high-precision pH/Ion meter designed for both research and routine laboratory applications. It offers advanced features such as multi-point calibration, ion concentration measurements, and connectivity options for external peripherals

Condition: used, This listing is for the Radiometer Analytical MeterLab PHM220 Lab PH Meter Kdjdpfeywy Ivex Ahbeu The unit is in full working condition and is ready for immediate use Th Radiometer Analytical MeterLab PHM220 is a high-precision benchtop pH meter designed for accurate laboratory analysis. Direct-from-lab surplus in original condition, this robust unit offers reliable electrochemical testing for any professional setup.

Condition: used, This listing is for a Sartorius Tare CPA34001S Analytical Balance The unit is in full working condition and is ready for immediate release. This model offers a weighing capacity of up to ~34,000 g (34 kg) with a readability of 0.1 g. It includes an automatic internal calibration (isoCAL) function, allowing the balance to self-calibrate at set intervals to maintain accuracy. The weigh cell is described as “monolithic weigh cell technology” which gives stability, precision and durability. Large weigh pan: e.g., specification documents list a pan size of 400 × 300 mm for this model. The housing is designed to be robust and chemical-resistant for tough lab environments. Interface: it supports RS-232C / V24‐V28 serial interface for data logging, printing, external systems. Fast response time: average response stated < 2 s in one specification sheet. Tare function: full subtractive tare up to 100% of capacity is supported. Technical Specifications (typical) Based on the manual and spec sheet for this model: Capacity (Max): 34,000 g (34 kg) Scale interval (d): 0.1 g Linearity: ±0.2 g (typical) Repeatability (standard deviation): ≤ 0.1 g Pan size: ~400 × 300 mm Dimensions (W × D × H): ~313 × 532 × 120 mm Typical response time: ≤ 2 s Operating ambient temperature with isoCAL: 0 °C to 40 °C; without: +10 °C to +30 °C (from manual) Interface: RS-232C serial, 7-bit, various parity, 150-19200 baud. Applications & Use-Case Given its capacity (34 kg) and readability (0.1 g), this balance is suited for large-capacity analytical weighing rather than ultra-fine micro-weighing. Typical uses could include: Weighing bulk samples, large containers or vessels (e.g., large drums, tanks) where still a good accuracy of 0.1 g is required. Industrial laboratories, QA/QC, production where large items must be weighed with decent precision. Situations where the weighing pan size needs to accommodate large items (400×300 mm is relatively large). Kdsdexrt N Hopfx Ahbeu Environments where interface to computer/printer is needed for logging and traceability. Where regular internal calibration is a benefit to maintain accuracy over time without frequent manual external weight calibration.

Condition: used, This listing is for ATI Porta Sens 11 Gas leak detector The unit is in full working condition and ready for immediate use. Reliable handheld gas monitor designed for efficient leak checks across laboratory facilities. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility Kdodpfx Aexv Dh Ishbsu • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Oxford Instruments Type: INCAx-act + 2 x-stream mics + PC and software INCAx-act Analytical Drift Detector Kodpfxjzd Ru Do Ahbjdu Microanalysis of elements, including boron and above Operating temperature Normal mode: 10-25 degrees Operating temperature Extended mode: 10-30 degrees Storage temperature -25 to 40 degrees and 8 to 80% relative humidity, non-condensing Operating humidity

Condition: like new (used), Analytical and laboratory balance Was used in the laboratory of a medical cleanroom production facility. Kodpfx Asyvqyyehbedu Original price: €3,450

Condition: used, Spectro Type: Ciros Vision CCD Analysis device Kjdpfx Ahoziapusbsdu Ciros Vision CCD Overall height: 162cm, overall width: 150cm, overall depth: 90cm Adjustable extraction Total air flow: 500m³/h Condition: used Scope of delivery: (Autosampler as shown in the picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, This listing is for the Adam Solent Precision Analytical Balance + Adam ATP Printer The unit is in full working condition and is ready for immediate use Kdodpfoxhfgvsx Ahbju The Adam PW124 analytical balance is a reliable, precision instrument tailored for tasks requiring high accuracy—such as chemical analysis, formulation, and quality assurance. It combines ease of use, robust features like internal calibration and GLP-compliant data outputs, and sturdy construction that supports dependable performance in demanding laboratory environments. Key Features Exceptional Precision: Readability of 0.0001 g, repeatability around 0.0002 g, and linearity approximately 0.0002 g Backlit LCD Display: Easily readable under varying lighting conditions, with programmable backlight settings Calibration: Equipped with internal calibration, eliminating the need for external weights Connectivity: Includes an RS‑232 port for interfacing with PCs, printers, or data-loggers; supports GLP-compliant printouts with date and time Capacity Tracker: Visual indicator to help prevent overloading the balance Additional Functions: Offers selectable digital filtering for stability in changing environments, multiple weighing units, and standard lab weighing modes (e.g., check-weighing, parts-counting, percentage weighing, net/total) Security and Durability: Features password protection, a security slot for locks, sealed keypad, and robust metal housing—suitable for long-term lab use GLP Compliance: Capable of generating reports that include crucial data such as time, date, and calibration verification

Year of construction: 2022, condition: new, functionality: fully functional, Physical & Physical-Chemical Properties • Product Number: 046034 • Column Dimensions: 4 mm ID × 200 mm Length (Standard Bore, Analytical Format) • Stationary Phase Packing Material: Ethylvinylbenzene / Divinylbenzene (EVB/DVB) macroporous polymer. • Crosslinking: 55% • Particle Size: 9 µm • Pore Size: 2000 Å • Anion Exchange Capacity: 52 µeq per column • Functional Group: Alkyl quaternary ammonium • Maximum Pressure Limit: 4,000 psi (275 bar) • Solvent Compatibility: pH 0 to 14; compatible with 0 to 100% HPLC solvents • Hardware Interface: Device Monitoring Enabled and Viper Fitting Ready Recommended Standard QAR Operating Conditions Kedps Aay Rqjfx Ahbsdu • Eluent Composition: 2.7 mM Na₂CO₃ / 0.3 mM NaHCO₃ (Sodium Carbonate / Sodium Bicarbonate) • Flow Rate: 1.50 mL/min • Operating Temperature: Ambient temperature • Detection Method: Suppressed Conductivity • Recommended Suppressor: Dionex Anion Self-Regenerating Suppressor (Dionex ASRS 300 4mm or equivalent) operated in AutoSuppression Recycle Mode. • Applied Suppressor Current: 22 mA • Injection Volume: 10 µL • Storage Solution: 100 mM NaOH (Sodium Hydroxide). Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2011, functionality: fully functional, Auriga 60 Computer-Controlled FE-SEM with patented GEMINI® electron optics and field emission cathode, designed for analytical applications and high-resolution imaging under high-vacuum conditions. Year of manufacture: 2011 Kdsdpfx Ahozz H I Iobju FIB column type: Cobra FIB column SEM column type: Schottky field emitter Installed detectors: • SESI (commercial) • InLens • ESB • 4QBS (pneumatic) • STEM (pneumatic) • EDX X-MAX 80 mm (Oxford) • EBSD (HKL Channel 5) • Charge compensation Gas injection system: Platinum Maintenance report: The system has been serviced annually, with a service report provided each time. Operating hours: 13,290.33 hours (with current filament) PC and software included: Yes Included components: All pumps, cooling systems, and control units are included, except for the dampers. Software Version: • SEM: SmartSEM Version 6.00 (June 9, 2016) • EDX: INCA software package – Version 5.03 Price: Negotiable price excluding VAT and delivery

Year of construction: 2004, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 2917, Thermo Scientific ARL 3460 Spectrometer Thermo Scientific ARL 3460 optical emission spectrometer (OES) for sale. This unit was previously used in a foundry and was operational until it was replaced. The equipment is designed for rapid chemical analysis of metallic materials and was used in foundries and the metallurgical industry for quality control and composition verification. Features: • Brand: Thermo Scientific • Model: ARL 3460 • Equipment type: Optical emission spectrometer (Spark OES) • Year of commissioning: 2004 • Condition: operational until replacement • Origin: foundry / metallic material analysis • Maintenance: Annual maintenance inspections Kodpfx Ahezdzgqebjdu • Applications: quality control and chemical analysis of metals • Analytical capability: simultaneous analysis of multiple elements, depending on the line/installed configuration, including C, Mn, Si, P, S, Ni, Cr, Mo, N, Cu, W, Nb, V, Co, Al, Ti, and Fe • Common materials: iron, carbon steels, stainless steels, super duplex steels, nickel-based alloys, and other metallic alloys • Includes: PC, monitor, spare parts, and commonly used consumables available with the equipment • Reason for sale: equipment upgrade Additional information, photographs, and sales terms can be provided to interested parties.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, overall weight: 34 kg, input frequency: 50 Hz, input current: 2 A, input voltage: 230 V, RETSCH AS 200 control – Vibrating sieve machine with analytical sieves 25–200 µm For sale is a RETSCH AS 200 control for particle size analysis and fractionation of powders and bulk solids. The system is suitable for applications in laboratories, research, and quality assurance, for example, for the analysis of metal and ceramic powders. Ksdpsz Ixfvsfx Ahbsdu The machine is in very good condition with normal signs of wear and tear. The total new price, including the listed accessories, was €6,180 in January 2024. The electromagnetic drive generates a three-dimensional sieving motion. The vibration amplitude, sieving duration, and interval operation can be digitally adjusted. The controlled amplitude enables reproducible sieving results; up to 99 parameter combinations can be saved. Technical specifications according to the manufacturer: - Measurement range: 20 µm to 25 mm, depending on the material and sieve set - Maximum sample quantity: 3 kg - Vibration amplitude: 0.20–3.00 mm, digitally adjustable and controlled - Sieving duration: 1–99 minutes - Suitable for dry and wet sieving, with corresponding accessories - Dimensions of base unit (W × H × D): 417 × 212 × 384 mm - Weight of base unit: approx. 35 kg Available accessories: Ten used analytical sieves according to DIN ISO, each with a diameter of 200 mm and a frame height of 25 mm. One sieve each with the following mesh sizes: 25 / 32 / 38 / 45 / 53 / 63 / 75 / 100 / 150 / 200 µm A collection tray with a diameter of 200 mm and a height of 50 mm is also included. Shipping is possible; shipping costs will be charged separately. If you are interested, please contact me.

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: Kdsdpfxjzx Dwns Ahbou CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: used, functionality: fully functional, Core Analytical Performance • Mass Range: m/z 15 – 1,650 • Scan Rate: 5,200 atomic mass units per second (u/sec) • Mass Accuracy: 0.1 u across the entire mass range • Mass Stability: < 0.1 u over a 24-hour period • Dynamic Range: > 6.5 × 10⁶ • Mass Resolution: Three user-selectable settings (Full Width at Half Maximum): • Unit: 0.7 u • Wide: 1.2 u • Widest: 2.5 u Ionization & Hardware Configuration • Supported Ionization Sources: Electrospray Ionization (ESI), Atmospheric Pressure Chemical Ionization (APCI), Nanospray with HPLC-Chip Cube MS interface, and Multimode source (simultaneous ESI and APCI). • Collision Cell: High-pressure, hexapole geometry equipped with linear acceleration to eliminate cross-talk and optimize fragmentation. • Scan Modes: MS scan, MS/MS Product Ion scan, Multiple Reaction Monitoring (MRM), Precursor Ion scan, Neutral Loss/Gain scan, and Selected Ion Monitoring (SIM). • Polarity Switching: Fast positive/negative switching programmed by time segments. • Vacuum System: One triple-stage turbomolecular pump backed by a standard mechanical foreline roughing pump. Physical & Utility Requirements • Dimensions: Approximately 18.5" H × 43.5" W × 26" D (47 cm × 111 cm × 66 cm) • Weight: ~236.5 lbs (107.5 kg) • Power Supply: 200 – 240 VAC, Single-phase, max consumption around 2700–2850 VA Kdedj Aaylzjpfx Ahbsu Good working condition. Please check out our other listings as well.

Year of construction: 2020, condition: used, This listing is for Agilent Technologies Magnis NGS Prep System The unit is in full working condition and ready for immediate use The Agilent Magnis NGS Prep System is a compact, fully automated benchtop platform designed for next-generation sequencing library preparation. It streamlines complex workflows, offering walk-away automation, consistent reproducibility, and high-quality results for genomics laboratories. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Kdedpfx Ahj Aaq Slsbsu Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Year of construction: 2018, condition: used, This listing is for the Hamilton Microlab Star M The unit is in full working condition and ready for immediate use This Unit is supplied with: - PC With Software - Thermo Scientific Haake A25 Heating and Cooling Water Bath and SC100 Circulator - ODTC Power and Control Unit - Hamilton Heater and Shaker Box - Spare Parts and Consumables (please see pictures) - Original Manuels and Guides A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Kedpfx Ahjy Eyqysbsdu • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 2011, condition: used, The LECO TC-400 ON analyzer is a highly precise laboratory instrument for determining the oxygen and nitrogen content in solid samples. This system is typically used in metallurgy, materials testing, research, and quality assurance, providing reliable elemental analysis for a wide range of inorganic materials. The TC-400 operates as an inert gas fusion analyzer (ON/O-N analysis) and enables: Determination of oxygen (O) and nitrogen (N) in solid samples Analysis of metals, alloys, ceramics, and powder materials Highly precise measurement through fusion extraction in a graphite crucible Kdsdpfx Ahszkaa Ajbsu Automated sample loading (depending on the configuration) Evaluation via integrated analysis software Repeatable results for quality and process control Documentation and data management via TCWin Analysis Software (Version 4.24) Thanks to its robust LECO technology, the TC-400 offers stable performance, high measurement accuracy, and a proven analytical platform for demanding applications in research and industry.

Condition: used, This listing is for a Analytical weight set. Kdodpfsxx Ad Hox Ahbju The unit is in full working condition and is ready for immediate release. Analytical Weight Set is a set of weights used in laboratory balances and scales for precise measurements

Condition: new, functionality: fully functional, We have 2 pieses in stock. price is for one unit only. It is a high-performance silica-based guard column designed to protect TSKgel SuperSW analytical columns used in size exclusion chromatography (SEC) for biomolecule separations. The technical specifications extracted from the label and official documentation include: Physical & Dimensions • Part Number (P/N): 18762 • Column Dimensions: 4.6 mm ID × 3.5 cm Length • Particle Size: 4 µm • Column Number: K0001 • Country of Origin: Made in Japan Kdedpfx As Aazgtshbju Matrix & Stationary Phase Properties • Base Material: Silica gel • Surface Modification: Hydrophilic bonded phase (diol-type chemistry) • Application Focus: Protection of analytical columns during high-resolution separation of proteins, antibodies, and peptides. Good working condition. Please check out our other listings as well.

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 07/24/2020 Complete analysis using the stationary spark optical emission spectrometer SpectroMaxX: Using the spark optical emission spectrometer, the alloy compositions and trace elements of macroscopic solid samples can be determined with high accuracy, down to the ppm range. Description of the system: Open spark stand for high sample throughput A wide variety of sample geometries are possible The following elements are available as a basis: Magnesium The analyzable elements and concentration ranges depend on the methods available for the respective base element. Usable wavelength range: 170-670 nm Output of measurement values in concentrations or intensities Selectable output units (%, ppm) Output of statistical parameters (mean, RSD) Kdodpfx Ahjzizdtebou SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm; the applicable and configured wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized for customer requirements Expansion with additional modules possible on-site Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption due to the argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate easily replaceable Temperature-absorbing design without water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power: 4 kW Display system: Dedicated microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/grade Result Manager Online maintenance scheduler Environmental conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 40423, The MACSQuant Analyzer 16 is a benchtop, automated flow cytometer engineered for multi-parameter cell analysis, offering convenience, sensitivity, and flexibility for both research applications and advanced cell therapy workflows. As part of the MACSQuant product line, this model improves upon previous generations by delivering 16 optical parameters (i.e., multiple fluorescence detection channels) while maintaining a compact footprint and a high degree of automation. Typical applications include immunology, immunophenotyping, cell and gene therapy (CGT) analytics, quality control processes, and general cell biology research. Key Features & Capabilities Highlighted advantages and system features: Kjdoxg Ndiepfx Ahbodu Feature Description / Details Optics & Detection - Outfitted with three spatially separated lasers: 405 nm, 488 nm, and 640 nm. - Provides 16 detection/optical parameters (multiple fluorescence channels, plus scatter signals). - Signal detection covers FSC (forward scatter), SSC (side scatter), and multiple fluorescence channels (e.g., V1–V5, B1–B6, R1–R3), each equipped with optimized photomultiplier tubes (PMTs). Fluidics / Sample Handling - Minimum sample uptake: as little as 1 µL (recommended ~25 µL for precise volumetric counting). - Adjustable sample flow rates: 25, 50, or 100 µL/min, or automated regulation to achieve target event rates (e.g., 500, 1,000, or 2,000 events/second). - Maximum event rate: up to approximately 15,000 events/second (ALT mode). - Compatible with various sample vessels, including 1.5, 2, and 5 mL tubes, tube racks, and 96-well plates. Transition between tubes and plates is user-friendly. - Utilizes an automated robotic needle arm for sample aspiration, thorough mixing, and automated washing of both the injection port and needle before and after runs. Automation & Workflow - Full automation for maintenance routines, PMT gain calibration, fluorescence compensation, sample acquisition, and analysis. - "Express Modes" (pre-set protocols) and templates support reproducible sample acquisition and data processing workflows. - Harmonization features for cross-instrument and multi-site data alignment, promoting data standardization for multi-center studies. - Regulatory and compliance support: offers 21 CFR Part 11-compatible features (audit trail, user management, electronic signatures, and reporting), making it ideal for clinical and translational research labs. Sensitivity & Performance - High fluorescence sensitivity: e.g., for standard dyes — FITC < 110 MESF, PE < 75 MESF, APC < 100 MESF - High precision:

Condition: used, This listing is for Waters Acquity UPLC The unit is in full working condition and ready for immediate use. The Waters Acquity UPLC is an ultra performance liquid chromatography system designed for rapid, high resolution analytical separations. It delivers excellent sensitivity, reproducibility, and solvent efficiency for pharmaceutical, biotechnology, environmental, food, and research laboratory applications. Transparency Report and Technical Audit Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer Notice for Procurement: Kdsdpfx Aexx Af Djhbju This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for a Analytical 200g Weight. The unit is in full working condition and is ready for immediate release. Analytical Weight Set is a set of weights used in laboratory balances and scales for precise measurements Kdjdoxx Acvspfx Ahbeu

Condition: used, Universelle Faltschachtelklebemaschine / Universal Folder Gluing machine Faltschachtelklebemaschine /  Folder Gluing machine ROPI UKM 380 Baujahr / Year 2003  Format / Size min. 60 x 100mm - 500 x 420mm Geschwindigkeit / (Belt) Speed max. 5.000 cycles/h. Kjdpfx Ahjz Hw Ndebsdu Materialgewicht / Materials 150 - 450g/m2 Dispersionskaltleim / dispersion adhesive Saugbandanleger für Non-Stop Betrieb / Suction belt feeder for non-stop operation Maschinendimensions / Machine dimensions Machine L 550cm x W 80cm x H 88cm Maschinengewicht / Machine weight 650kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, This listing is for a Thermo Scientific Heratherm IMH400-S Incubator. The unit is in full working condition and ready for immediate use. Advanced gravity convection technology ensures stable temperatures. Power-On Verified. The Thermo Scientific Heratherm IMH400-S is a high-performance microbiological incubator designed for delicate samples. It features a stainless steel interior, intuitive interface, and exceptional temperature uniformity. Ideal for research and clinical labs requiring reliability and precision. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Kodpfx Ajxzh H Eohbodu Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.