Used Graf Synergy Sd 500-S8 for sale (17,724)

Condition: used, Year of construction: 2017, The SD 500 industrial double-head saw with a hydropneumatic feed system for the cutting discs is a machine model with cutting discs that extend from below. As standard, the left head is fixed. The right head is mobile and is moved using a highly precise servo drive. The cutting length readout is completely independent of the drive for the mobile head. The machine is equipped with fixed stops for angles of 45º and 90º. Intermediate angles can also be achieved. Both heads are equipped with main vertical and horizontal clamping devices. The discs, set at an angle of 45º inwards, eliminate the need for corrections. Because the cutting discs extend from bottom to top and the main vertical clamping devices act on the profile at the point of its highest stiffness, the profile does not bend in the housing groove. This ensures that both the angles and planes are maintained, with the additional support of the horizontal clamping device. The machine's operation is controlled via an independent control panel equipped with a DELL PC. Standard equipment: independent control panel with a PC cutting length readout independent of the head drives (from a magnetic strip) electronic positioning of the mobile head automatic machine zeroing cutting of 2 to 4 profiles simultaneously discs extending from below in a / \ arrangement, eliminating the need for corrections Nedpfxjznuk Ro Amyswi hydropneumatic feed system for the cutting discs triple vertical and horizontal pneumatic clamping pneumatic adjustment of the disc extension angle (90°-45°) spacer between the heads, applied manually 4 outlets for industrial extraction, Ø100mm cooling system cutting length: min 300mm, max 3300mm roller guide at the mobile head, 3000mm

Condition: used, Year of construction: 2013, functionality: fully functional, saw blade diameter: 500 mm, CNC cutting center fully automatic CAT500 The machine is operational and ready for use Blade diameter: 500 mm Cutting angles in range: -45°/90°/+45° Operator panel with Windows Nwedpfxox Ez Igs Amyoi Working direction from right to left Chip extraction Waste conveyor Label printer

Condition: good (used), Year of construction: 2011, functionality: fully functional, Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation Nwedpjtt Abxsfx Amysi

Condition: excellent (used), Year of construction: 2013, operating hours: 150,494 h, functionality: fully functional, GRAF welding and cleaning line, year 2013. Working direction from left to right. SL4U four-head welding machine, max. dimensions 2800 x 3200 mm, min.400 mm, flash 0.2 mm. WP CNC 2 TR cleaning machine. Cooling station. Knives for cleaning flat, grooved and smooth surfaces. It has only performed 150,494 cycles - very good technical condition. Nwedpfx Asyyxvwsmyoi

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion Nwjdpfx Amswhu Hhjyoi the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Condition: new, Year of construction: 2026, Optimum Optisaw SD 500 Double miter metal bandsaw with swiveling saw blade Art. No. 3292380 Length approx. 2122 mm Width/Depth approx. 1046 mm Height approx. 1497 mm Nwedpfx Amsgd Si Ejyji Weight approx. 522 kg Electrical data Motor power, coolant pump 100 W Total connected load 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 35 / 70 m/min Saw blade length 3770 mm Saw blade width 34 mm Saw blade thickness 1.1 mm Cutting angle 45 – -60 ° Feed Hydraulic via lowering cylinder Raising the saw blade manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular, vertical (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangular, vertical (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangular, vertical (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangular, vertical (solid material) 180 x 220 mm Heavy-duty industrial design Low-noise operation High cutting accuracy due to vibration-free operation Miter adjustment from -45° to 60° by swiveling the entire saw blade Supplied as standard with high-quality bi-metal saw blade Microswitch for automatic end shut-off Coolant pump Ball-bearing saw blade guide with carbide inserts for optimal cutting results Easy adjustment of the lowering speed by means of a flow control valve in the control panel Large, quick-release vice, laterally adjustable Clear control panel Location: In stock, 54634 Bitburg - immediately available -

Condition: used, Technical details: faceplate diameter: 5000 mm swing diameter: 6100 mm turning height: 2400 mm ram stroke each side: 1490 mm ram head dimension: 340 x 340 mm max. workpiece weight: 100.000 kg Nwedpfxsw Rz U Aj Amyoi total power requirement: 100 kW weight of the machine ca.: 155 t faceplate turning speed range: 0,4 - 50 U/min with 2 axes CNC SIEMENS 840 D *

Condition: good (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 1,230 kg, AUTOMATIC SAW / DOUBLE HEAD STB / FIMTEC SD 500 S6 YEAR 2005 Nwodor E Alqjpfx Amysi

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Due to the comprehensive technological modernization of our corn milling plant, originally built in the 1980s, our milling equipment has become available for sale. Nwedpfx Amsylhkteyoi Over the decades, the machinery operated reliably and stably in our facility, supported by continuous maintenance and professional operation. Throughout these years, our company earned long-term trust from its partners, largely thanks to the consistently high product quality ensured by this technology. The plant primarily specialized in the production of corn grits as its main product, alongside feed flour, food-grade flour, corn germ, and other by-products. The offered equipment: - has been continuously maintained - can be inspected while in operation - is sold together with the existing spare parts inventory All available spare parts are included in the sale, representing a significant advantage for the future owner in terms of operational security and maintenance planning. The listed price refers to one unit. We have a total of 3 units. There is also the possibility to purchase all advertised equipment as a complete package, for which a customized and preferential price can be offered. This is an ideal opportunity for companies considering the establishment of a complete corn mill, capacity expansion, or technological development. The earliest planned removal date of the equipment is February 2027.

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Nsdpfxjrah S Hj Amyjwi Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Condition: used, Buchrückenrundemaschine - Book Back Rounding Machine La Fornigrafica Dorsi 500 Year 2005 Working width max. 500mm Thickness of books 0 - 100mm Nsdpfewhgcuox Amyowi Output 400 - 600 Blocks/hour Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S8758, A machine for gluing cardboard books. Gluing is done using 16 heads. This allows selective application of glue where it is needed. Ideal for gluing board books with flaps, board books with puzzles Nsdpfxewhc U Tj Amyowi

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic centralized lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem swing axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone deflector * Mixing material hopper with individual control * Hydraulic front hopper * Support rollers with shock absorption * Reversible slat conveyor with double bars and individual control of conveyor belt halves * Automatic shutdown via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - Telematics system * Hydraulic system for Pave Manager Adv. * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Bottom plate Hardox 500 * Hydraulic adjustment of roof profiles * Two external controls incl. leveling electronics * Leveling system Mobamatic 2+1 * FRONT WHEEL DRIVE CAN BE ACTIVATED FOR WORK ----Additional equipment and accessories* Screw 380 mm 4.42 m * Connection kit V5100/6000 * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * RESTRICTED SD2500WS THERMO * Hydraulic system for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor * LED headlights screed left + right * 12V socket * TEMPERATURE MEASUREMENT SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool set * SetAssist (Transport position) * TRUCKASSIST ADVANCED * Thermomaterial hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - Lift axle * Infrared temperature measurement preparation * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT approved (G) PM * Spirit level screed * Holder for cross-slope Moba * Holder for height sensor MobaGrade 1x * Screed width measurement Nwsdpfx Aoy T Ukdsmysi * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale excepted.

Condition: ready for operation (used), Bosch SD-B5.380-012-01.000, brushless, permanent magnet synchronous servomotor, serial number: 545000096, used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Nodpfxei D Hbhj Amyjwi

Condition: ready for operation (used), Bosch SDB5.250.015-01.000, brushless, permanent magnet servo motor, serial number: 350000065, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Nwedpfoi D E U Aex Amysi

Condition: ready for operation (used), Bosch SD-B4.180.020-01.000 servo motor, serial number: 845000135, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nwsdpfsi D E Umex Amyoi

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Nwedpfx Aezh D S Romysi Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower Nedpfeww T Ezex Amyjwi -Manufacturer: Elektror, side channel blower side channel compressor -Type: SD-4N/S892 -Drive: 1.2 kW -Speed: 2800 rpm -Flow rate: 2.8 m³/min / 168 m³/h -Compression pressure: 180 mbar -Dimensions total: 450/360/H370 mm -Weight: 24.7 kg

Year of construction: 2008, condition: like new (used), Eillert MSD-500-V Salad spinner Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph Nwedjit I Dispfx Amyji

Condition: new, Year of construction: 2025, functionality: fully functional, Applications & Customer Benefits: The Arno® Screen SD Series (SD 1300–2100 / SD 1500–3400 / SD 2100–6000) are robust, semi-mobile screening drums designed for metal recycling and material separation. Ideal for processing metal chips, sheet metal, punching waste, and electronic scrap, they deliver precise three-fraction separation, high throughput, and flexible configuration for various screening tasks. Nwsdpfx Amsxvqhuoyoi Key Features: • Available in versions with Extension (larger drum area) or Bunker (uniform material feed) • Exclusive hexagonal drum design for superior precision and flow • Adjustable perforation sizes for customizable screening performance • Semi-mobile, foldable structure for flexible setup and transport • Optional Hardox drum plates for extended durability and wear resistance Tech Highlights: Sieve length 2100/3400/6000 mm · Screen Perforation 1-100/6-100/10-100 mm · Screen Perforation 1-100/6-100/10-100 mm · Power 5,5/7,5/7,5 kw · Installation surface 3,3 x 2,1 x 2,9/5,6 x 1,8/9,25 m

Condition: used, mileage: 479,158 km, power: 368 kW (500.34 HP), first registration: 01/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, KRONE SD Mega 13.64 x 2.48 x 2.96 m Nwedpfjzg Elpex Amyei First registration / TÜV Tire size: 445/45 R19.5 Tread depth in %: 20/30? 30/20 - 40/20 Axle design: BPW ECO+ / Air suspension / Disc brakes Permissible weight: 39,000 kg Unladen weight: 6,690 kg Equipment: BPW axles / Edscha canvas cover / Sliding canvas cover / Load securing certificate, Code XXL / Portal doors – Special equipment: Aero kit, Exterior mirrors and wide-angle mirrors electrically adjustable and heated, Wide-angle mirror with electric maneuvering aid, Battery 225 Ah, Battery disconnect switch, mechanical, Curb mirror on the right, electrically adjustable and heated, Differential lock, rear axle, Air horns on the cab roof (2), ETA fuse box, Cab: with air suspension, Driver's seat comfort, air-suspended and heated, with lumbar support and shoulder adjustment, Flame starter system, Interior lighting, red / white, dimmable, Lever-type brake, EVBec controlled, Comfort control panel, Sleeper cab, o., Multifunction steering wheel (leather), Air dryer, heated, Auxiliary heater Eberspächer D4S, Sun visor, exterior, Sunshade, side windows, Driver and passenger door, Sound system, Auxiliary air conditioning, Power outlet in cab 12V and 24V, Control module for fleet management system, Door extension for cab, Additional long-range / fog lights with cornering light Additional equipment: Axle configuration: 4x2, Ambient lighting, Front/approach mirrors, Trailer socket 24V / 7-pin, Anti-slip control (ASR), Audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, Onboard computer MAN-Tronic, Electronic brake system MAN-Brakematic, EURO 6 engine, Cab: with Nordic insulation, Cab: XXL, Suspension: Air / Air (full air), Power windows, Remote control central locking, Windshield tinted, Generator 28 V 80 A, Transmission: 16-speed - Type: ZF 16 S, Body / Superstructure: Semi-trailer tractor, Lever-type brake, EVB, Automatic climate control, Fuel filter, heated, Fuel tank: Combination tank - 400 L diesel + 60 L urea solution (AdBlue), Air intake raised, Air compressor 1-cylinder, 360 ccm, Engine 12.4 L - 368 kW Diesel, Engine compartment encapsulation, Wheelbase 3600 mm, Spare wheel jack, side, Fifth wheel coupling: Jost JSK 37 C, Disc brake, rear axle, Disc brake, front axle, Rear side windows tinted, Seat cover / Upholstery: Comfort quality, Spray mist reduction, Stabilizer on one rear axle, Storage box accessible from outside, Control type, cab, TGX, Door windows tinted, Underrun protection, front, Viscous fan, Central locking, Permissible total weight 18.00 t ----As inspected or offered, without any further services / accessories. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general delivery and payment conditions apply. We support you with export, preparation of export documents, procurement of license plates, supplier declaration, etc.! The information provided in advertisements, the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability / warranty for typographical and data transmission errors. Equipment listed may need to be verified separately. We expressly reserve the right to make interim sales, as we also offer this item on other portals. No guarantee for information on accessories. Subject to cha

Condition: ready for operation (used), Bosch SD-B4.180.020 servomotor SN: 563000785 with built-in ROD 426.029B-2500 / 281 464 08 - Z-No.: 1 909 713 SN: 5500204, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwedpfx Aoy Nn Nfemyji

Condition: ready for operation (used), Bosch SD-B4.140.030 servomotor SN: 367003628 with built-in encoder ROD 426.029B-2500 / 281 464 08 - Z-No.: 1 909 713 SN: 4932072, used, in good condition, 100% functional, delivery as per photos. Nodpjy Nn I Usfx Amyowi

Condition: used, Year of construction: 2021, Eillert MSD-500 VAR Vegetable Centrifuge This Eillert MSD-500 VAR vegetable centrifuge is in truly as-new condition and has seen very limited use. Designed for efficient drying of washed vegetables and leafy products, the machine features a variable speed drive, user-friendly digital controls, and a hygienic stainless steel construction. Ideal for fresh-cut processors, vegetable growers, packers, and salad producers looking for a reliable and compact drying solution. Key Features - Variable speed control (VAR version) - Stainless steel hygienic construction - Digital control panel - Emergency stop button - Supplied with multiple centrifuge baskets - Compact footprint - Easy cleaning and maintenance - CE marked Suitable For - Leafy vegetables - Lettuce - Spinach - Herbs - Fresh-cut vegetables - Salad mixes Condition This machine is in excellent, near-new condition and is ready for immediate operation. Included - Multiple blue centrifuge baskets as shown in the photographs - Integrated digital control system - Variable speed functionality Njdpfxszd Ufgj Amyjwi Availability Available immediately from STC Food Solutions. For pricing, additional information, or to arrange an inspection, please contact us. A premium-quality centrifuge offering efficient product drying with minimal footprint and maximum reliability.

Condition: used, mileage: 94,000 km, power: 375 kW (509.86 HP), first registration: 10/2016, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, wheelbase: 4,600 mm, color: orange, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, central locking, compressor, differential lock, electronic stability program (ESP), fog lights, navigation system, parking heater, soot filter, traction control, Double cab, central lubrication system, EBS, single owner, green emissions badge (category 4), reversing camera, electric windows, radio/CD, electrically adjustable exterior mirrors, speed limiter, adaptive cruise control, new general inspection / emissions test, diesel automatic, climate control, Euro 6, L package, green emissions badge 4, axles: 4, wheelbase: 460 cm, drivetrain configuration: 8x4 Tridem, last axle liftable and steerable, long-distance driver’s cab, large FMX cab with air conditioning, camera, differential lock, hydraulic system, tipper hydraulics, ABS, adaptive cruise control, EBS, ESP, compressor, navigation system, 2 remote controls, retarder/interder, auxiliary heating, aluminium fuel tank, brake booster, double fuel tank, electric windows, electrically adjustable exterior mirrors, speed limiter, fridge, air suspension, air horn, fog lights, particulate filter, radio/CD, rear view camera, sun visor, spoiler, toolbox, PTO (power take-off), centralized lubrication, central locking. MTS Dino 5 suction excavator Type 4A14 T 36,000 V, dual turbine Powerboom with rotary head, central lubrication, extra high-pressure pump unit with hoses and pistol, extra air valves at the rear of the truck for operating pneumatic tools such as a hammer, compressor hours: 3,790, fan hours: 3,512, MTS serviced, Volvo service book, garage vehicle, single owner, major overhaul for €31,000. Permissible gross weight: 32,000 kg. FOR US, CONDITION AND OUR GUT FEELING ARE DECISIVE – PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the following number. *TRADE-IN, PURCHASE, OR FINANCING OF YOUR VEHICLE POSSIBLE!* All information provided without guarantee. More offers can be found on our homepage. The description and stated data do not constitute a guarantee and are not binding. The binding agreement is the purchase contract concluded at the dealership when purchasing the vehicle. Subject to errors and prior sale. Nwodovic A Uopfx Amyji