Used Gleason Model 61 for sale (19,575)

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle Cjdpfx Alertrzdsbohb (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Chjdpfx Aortrykelbjb Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: E61SI17032579878, SAVE ON LIQUIDITY – LEASING & HIRE PURCHASE OPTIONS AVAILABLE!! This is an SCC 61 WE combination oven/steamer in an electric model, from the premium manufacturer Rational, manufactured in 2017. The combination oven/steamer is a unit from the latest SCC series, featuring triple-pane glass and LED lighting. Cedpszyqy Sjfx Albshb The unit will be fully refurbished in our in-house workshop, and the combination oven/steamer is fully functional. Available from week 36. The base frame shown in the picture is not included in the offer, but can be purchased as an option. The list price is €9,400 net. You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all models, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Tested & fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845x850mm Power connection: V: 400 / kW: 11 / Hz: 50/60 Capacity: 6 x 1/1GN Weight: approx. 110 kg Serial number: E61SI17032579878 Year of manufacture: 2017 Condition: used, inspected, fully functional Additional information: In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C) and combination (30°C to 300°C) Care Control – self-cleaning system Core temperature sensor Handheld spray nozzle with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable integrated, maintenance-free grease separation system Automatic start time selection 7 cleaning levels for unattended cleaning – even overnight Steam injection adjustable in 3 stages – from 30°C to 260 °C 5 programmable fermentation stages USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice or would you like to view something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, overall weight: 100 kg, Neonpost Model 616. 6-head inkjet printer for envelopes of all sizes and cards, and optionally brochures, equipped with NAW (Name, Address, City) data printing. The machine is in like-new condition. Chodoxywwkjpfx Albeb

Year of construction: 2019, condition: used, machine/vehicle number: E61MI19122799286, This is a combination steamer CMP 61 from the premium manufacturer Rational, in an electric version (left-hinged door), manufactured in 2019 and equipped with a fully automatic self-cleaning system! The unit has undergone a thorough inspection in our in-house workshop and is fully functional. The base shown in the picture is not included in the offer, but can be purchased as an option. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational model? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This unit is the optimal choice if you are looking for a classic combination steamer that you want to operate manually. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The Combi Master® from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845 x 850 mm Power connection: 400 V / kW: 11.0 / 50-60 Hz Capacity: 5x1/1 GN Weight: approx. 103 kg Serial number: E61MI19122799286 Year of manufacture: 2019 Condition: used, inspected, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and chilled dishes to the optimal serving temperature under optimal conditions Automatic separation of fat for clean cooking chamber air Fully automatic cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food Ventilated double-glazed door (swivels for easier cleaning) Core temperature measurement by means of a sensor Cool-down function Fully automatic self-cleaning High-performance fresh steam generator (automatic flushing and emptying) Hand spray with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Chedpfx Aszmf A Uslbeb Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. Subject to changes and errors. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm max. module total power requirement 20 kW weight of the machine ca. 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need. Chodpfot Hwxhsx Albob

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Codezn Aymspfx Albehb Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, overall weight: 9,000 kg, TECHNICAL DETAILS Foot cone angle: 15–55° Pitch circle diameter: 152 mm Tooth height with 21° finishing milling cutter: max. 10.7 mm Cjdezwmy Njpfx Albshb Tooth height: max. 14.8 mm Tooth width at the tooth root: max. 28 mm Milling cutter diameter: 200 mm Milling cutter diameter according to template: max. 0.21″ (?) Number of teeth range: 8–50 Indexing range: 8–50 mm (?) Machining speed: 49.7 m/min Milling cutter speed: 32.6–49.7 m/min Feed rate: 2–3.1 s/tooth Workpiece spindle Diameter of conical bore at the large end: 99 mm Clamping length: 304.8 mm Taper per foot: 15.4 mm Taper depth: 15.8 mm Countersink behind the taper: 57.2 × 77.9 mm Spindle bore diameter: 22.3 mm MACHINE DETAILS Power of main drive motor: 7.46 kW Speed of main drive motor at 60 Hz: 1,800 rpm Speed of main drive motor at 50 Hz: 1,500 rpm Speed of hydraulic motor at 60 Hz: 1,800 rpm Speed of hydraulic motor at 50 Hz: 1,500 rpm Speed of coolant pump at 60 Hz: 3,600 rpm Speed of coolant pump at 50 Hz: 3,000 rpm Speed of chip conveyor motor at 60 Hz: 1,800 rpm Speed of chip conveyor motor at 50 Hz: 1,500 rpm Dimensions & Weight Footprint: 3,200 × 2,210 mm Machine weight: approx. 9,000 kg

Condition: used, Year of construction: 2018, max. wheel diameter 450 mm max. module 4 mm Control Siemens 840 D sl internal diameter 100-300 mm weight of the machine ca. 11 t dimensions of the machine ca. 5,85 x 8,30 x 3,80 m GLEASON-PFAUTER 300 PS Gear Skiving Machine – Year 2018 For sale is a high-performance CNC gear skiving machine type GLEASON-PFAUTER Cedpfx Alezupl Njbohb 300 PS, built in 2018. The machine is ideally suited for the precise machining of internal gears and offers excellent dynamics, advanced CNC technology, and a robust machine design. Equipped with a powerful Siemens 840D sl CNC control, this machine provides optimal conditions for efficient and repeatable gear manufacturing processes. Technical Specifications - Max. gear diameter: 450 mm - Max. module: 4 mm - Internal diameter range: 100 – 300 mm - Max. allowable skiving cutter diameter: 175 mm - Mounting surface diameter: 125 mm - Axis Travels: X-axis travel: 350 mm Y-axis travel: 300 mm Z-axis travel: 440 mm - Max. skiving head swivel angle: ±25° - Workpiece table outer diameter: 570 mm - Max. table load capacity: 5 kN - Feed Rates and Speeds X-axis feed rate: 12,000 mm/min Y-axis feed rate: 5,000 mm/min Z-axis feed rate: 8,570 mm/min - Tool speed: 0 – 3,000 rpm - Workpiece table speed: 0 – 1,500 rpm Additional Equipment / Information - CNC Siemens 840D sl - Swivel gripper slide travel: 180° - Operating voltage: 400 V - Machine weight: approx. 11 t - Space requirement: approx. 5.85 × 8.3 × 3.8 m - Hydraulic oil capacity: 150 l - Coolant capacity: 850 l - Motor and hydraulic cooling: 100 l The machine is in very good condition and is ideally suited for demanding series production and high-precision gear manufacturing applications. Inspection by appointment possible.

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm gear width 58 mm max. module 10 min. module 0,5 Chodpfx Aleyan Nfsbob Control Siemens Sinumerik 840D weight of the machine ca. 9,5 t dimensions of the machine ca. 3800x2600x2550 mm Maximum wheel diameter: 275 mm Module +: 10Module -: 0.5 CNC control Max. spindle speeds: 1200 rpm Max. wheel width: 58 mm

Condition: used, Year of construction: 2008, Maximum workpiece outer diameter 3420 mm workpiece diameter nominal 2400 mm max. module 30 mm control Siemens Sinumerik 840 D Minimal workpiece - internal diameter 630 mm Csdpeztz Rujfx Albshb Maximum workpiece outer diameter 3420 mm Maximum workpiece tooth width 600 mm max. rim strength 500 mm Maximum permissible head circle diameter 440 mm Hob/disc cutters – Maximum length 90 mm Milling arbour diameter 80 mm milling head -swivable +15/-15 Grad workpiece table outer diameter 1870 mm Workpiece table bore 600 mm Workpiece table – Maximum permissible load 300 kN rapid traverse X-axis 3000 mm/min rapid travel z-axis 4000 mm/min Workpiece table speed 0-6 U/min Tools speed 18-180 U/min weight of the machine ca. 38 t dimensions of the machine ca. 8,41 x 9,05 x 5,19 m total connected load 100 kVA Equipment/accessories: - IFK2 internal milling head - Milling arbor with spacer discs - Chip conveyor - Oil mist extraction - Dry machining only - Technical documentation

Condition: excellent (used), Year of construction: 2018, max. wheel diameter 450 mm max. module 4 mm internal dia. - min. 100 mm internal dia. - max. 300 mm Maximum permissible peeling wheel diameter 175 mm Diameter of the installation area 125 mm slide travel X-axis 350 mm slide travel Z-axis 300 mm slide travel Z-axis 440 mm Largest swivel range of the peeling head ±25 Grad workpiece table outer diameter 570 mm Workpiece table – Maximum permissible load 5 kN Feed - X 12000 mm/min Feed - Y 5000 mm/min Feed - Z 8570 mm/min Tools speed 0-3000 U/min Workpiece table speed 0-1500 U/min voltage 400 V weight of the machine ca. 11 t dimensions of the machine ca. 5,85 x 8,3 x 3,8 m Technical specifications: - CNC Siemens 840 sl - Swivel grab travel: 180 degrees Fluids: - Hydraulic: 150 l - Coolant: 850 l Cjdpfxozfqikj Albehb - Engine and hydraulic cooling: 100 l - Grease lubrication: 2 kg

Condition: used, Year of construction: 1998, max. wheel diameter 1000 mm gear width 152 mm max. module 17 max. wheel diameter 1000 mm control Fanuc Serie 150 M total power requirement 75 kW weight of the machine ca. 29,5 t Max. diameter. Gear: 1,000 mm Dimensions: 5.5 x 5.3 x 3.2 m Weight: 29.5 tons Control: CNC (FANUC Series 150M) Max. wheel diameter 1,000 mm Max. day with single timing 1,000 mm Face milling Max. module 17 Control FANUC Series 150 M Number of teeth 5 - 300 FACE WIDTH 152 mm X-axis -305 Y-axis -305 / +305 mm Chodpfx Aeyan N Eslbjb Z-axis -25 / +711 mm B-axis -5 / 90 degrees

Condition: used, Technical details: weight: 400 kg Cedjzxxftepfx Albshb number of strokes: - Hub / Min Torque: - kp dimensions L x W x H: 1,24 x 0,84 x 1,0 m

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece Codpowzyp Iofx Albehb circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm >> Wet and dry, 2 chip conveyors, table diameter 2500 mm

Condition: excellent (used), Capacity M16 module Table diameter: 1,200 mm Cedpfozql Ufox Albehb Maximum workpiece diameter: 1,500 mm Milling slide travel: 600 mm Table center hole diameter: 250 mm

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully reconditioned milling head from a Gleason Pfauter P210L – manufactured in 2004. Chsdezr Hd Ropfx Albob

Condition: used, Year of construction: 2003, max. wheel diameter 275 mm gear width 58 mm max. module 13 min. module 2 Control SINUMERIK 840 D number of teeth 5 - 200 ratio of transmission 10:1 cutter diameter max. 228 mm x-axis 25 - 350 mm y-axis +/- 175 mm z-axis 125 - 600 mm b-axis -5 / +90 ° total power requirement 75 kW weight of the machine ca. 11,7 t dimensions of the machine ca. 12,5 x 3,0 x 3,0 m Both Spindles retrofitted in 07/2026 Equipped for dry milling Pressure deburrer Deburring device with driven brush Codpox R U E Nofx Albehb Integrated magnetic chip conveyor Promot Cellmaster Cartridge pulse filter system User interface control works with Gleason Summary

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Hello, we are offering our 2017 Rabolini die-cutting machine/die-cutting system, which has been completely overhauled. The maximum die-cutting format is 100 cm x 140 cm, with a cutting force of 360 tons. Chodpezxufvefx Albob Die-cutting principle: flat/flat. Weight of the machine: 8,100 kg. The die-cutting machine is located on the ground floor, on a well-accessible industrial concrete floor. Documentation, CE declaration, etc., are all available! The machine can be inspected and tested while in operation. We would be happy to assist with training and instruction on how to operate the machine. The machine is located in D-41751 Viersen and is available for inspection. If you have any questions about the machine, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 4033, overall weight: 800 kg, type of input current: AC, input voltage: 220 V, total width: 1,000 mm, total length: 10,000 mm, total height: 1,200 mm, Pitney Bowes Vantage Sorting System designed for high-volume mail processing, document handling and sorting operations. The system is engineered to scan, image and sort large volumes of mail using automated OCR, configurable sorting bins and piece-level tracking. Chedpfx Ajzxbgaslbeb This is a comprehensive industrial sorting system comprising eight sorting sections, multiple sorting bins, operator control panels and monitoring equipment. Information displayed on-site indicates a processing capacity of approximately 45,000 mail pieces per hour and approximately 30 million pieces annually. Depending on the configuration, the available specifications indicate maximum processing speeds of up to 46,300 No. 10 envelopes per hour or up to 50,000 postcards per hour. Manufacturer: Pitney Bowes / BlueCrest Model: STV1 Year: 2012 Product line: Vantage Sorting System Equipment type: Automated letter and mail sorting system Construction: Metal structure New one around 1,5 m. Euros Requests for proposals.

Condition: used, Year of construction: 2008, control Siemens 840D Hobbing Machines for Large Gears Flexible and Versatile Gear Hobbing Gleason’s large hobbing machines offer maximum productivity for roughing and finishing operations on cylindrical gears for many industries: wind turbines, industrial gearboxes, mining, and shipbuilding, gear machining, and many more. Chjdewzypnopfx Albeb The guideways are wide and feature hydraulically preloaded guides, which are used in combination with a separate linear guide and backlash- free rollers. This ensures precise slide movements with every feed. The design of the worktable ensures optimal conditions for absorbing and transferring cutting forces to the machine base. The use hydrostatic table bearings, combined with the proven backlash-free double-worm gear, guarantees precise table movements and the highest flatness and concentricity accuracies of the worktable. This holds true regardless of significant fluctuations in workpiece weight and/or high machining forces. The motorized gear hobbing heads for external and internal gear cutting are designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hobbing heads. The power range of the drive takes future tool developments into account. Naturally, the gear hobbing head drive is also backlash-free. These machines are particularly well-suited for use with state-of-the-art cutting materials. >> dry only, 1 chip conveyor, table diameter 1,870 mm

Condition: excellent (used), Original Stryker Stair-Pro stair chair, model 6252, designed for the safe transport of patients up and down stairs. Equipped with a track system that significantly reduces the effort required by rescuers and increases control during descent. Robust aluminum construction, high load capacity (approx. 227 kg), complete set of safety belts, and foldable components for ease of transport and storage. The equipment is fully operational, complete, and in very good visual condition – ready for immediate use. Made in the USA. Ideal for EMS teams, fire departments, hospitals, ERs, and nursing homes. Key features: • Model: Stair-Pro 6252 • System: track system (safe stair descent) • Load capacity: up to approx. 227 kg • Construction: lightweight and durable aluminum frame • Safety: securing belts, stable handles • Condition: used, very good, fully functional Chjdpfx Aex N Idcelbeb • Manufacture: Made in USA

Condition: used, Year of construction: 2006, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Chjdpfx Alovxwr Aebsb Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10,00 to dimensions of the machine ca. 6,10 x 4,40 x 3,30 m coolant filtering unit Hoffmann HSF 100 V

Condition: excellent (used), Ferno Model 59 T EZ Glide – stair transport chair, 227 kg. Professional evacuation and transport chair by Ferno with EZ Glide system, designed for the safe descent of patients down stairs. Sturdy aluminium frame, complete set of safety straps, foldable components for easy transport and storage. The equipment is functional, well-maintained, and ready for use. Ideal for EMS, fire services, hospitals, and care facilities. Price listed per unit. Cedpfx Alsx N Ic Eobohb

Condition: used, Year of construction: 2014, Technical details: max. wheel diameter: 150 mm gear width: 350 mm max. module: 4 Cjdpextbmiefx Albohb total power requirement: 48 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 4,88 x 4,40 x 3,56 m spindle turning speed range: 100-1000 U/min Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning. *