Used German Kiln Technology Car Bottom Furnace for sale (41,619)

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Lrsdpfxsycvxms Af Sst Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer. Ledpezu Nvzofx Af Ssrt

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, immediately available -Volume 18,000 liters -Maximum temperature 350°C -Internal dimensions L x W x H 4100 x 2100 x 2100 mm -External dimensions (with rails) L 9970 x W 3060 x H (with lift-up door) 6110 mm -Control system Eurotherm Nanodac Ljdpfou Hma Nex Af Ssrt -Temperature stability (at rated temperature without load) ±5°C -Automatic inlet and outlet air dampers -Electric lift-up door -Electrically driven hearth carriage -Power 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We would be pleased to offer installation and commissioning, as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enamelling furnace, drying oven, industrial furnace, heating chamber, heating oven, temperature oven, drying cabinet, chamber furnace, large-volume furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New machine, immediately available, 12 months warranty -Internal dimensions (w x d x h): 1250 x 4000 x 1450 mm -External dimensions (w x d x h): 1900 x 4900 x 2500 mm -Power consumption: 240 kW Lrjdpfx Afey Avmls Set -Current consumption: 350 Amperes -Maximum temperature: 1300 °C -Oven weight (approx.): 6000 kg -Control system: JUMO IMAGO 500 -Software packages: (OPCA & PCC) -Display unit: JUMO Logoscreen 601 -Includes: feedthrough hole and 6 additional slots for recording type K customer thermocouples -Multi-zone design (3 zones) -Switchgear with solid-state relays -Climate control for the switchgear -Automatic inlet and outlet dampers -Controlled cooling system (including frequency converter, controlled via the control system) -Electrically driven furnace car -Maximum load: 3.5 tons -Swinging door -Documentation, CE declaration We would be happy to offer installation, commissioning, and training for your employees. Please contact us! We stock new and used industrial furnaces. Inspections in our warehouse are possible upon request. Furnace car oven, car hearth oven, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, stress-relieving furnace, enamelling furnace, drying oven, industrial furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln

Condition: refurbished (used), functionality: fully functional, Batch furnace on trolley Manufacturer: Av Eujc Year of manufacture: 2007 Technical data: Batch weight: max. 15 t Usable dimensions: 3300 x 2200 x 1600 mm (L x W x H) Operating temperature: max. 950 °C Temperature uniformity: +/- 10 °C at the end of the holding time 6 pulse burners "System Löcher" on the furnace door of the trolley Ledpfx Afsza S Ewe Sert including: Control cabinet and gas control system Turnkey, including installation, excluding freight

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Ledpfxsz Dhm Us Af Sjrt

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Lredpjd Spx Djfx Af Sjt Glasbeek finish Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2018, Configuration: Single Track Multi Busbar, voltage: 380VAC 3P/N/PE/50Hz, power: 15kW, compressed air: 0.6MPa, machine dimensions X/Y/Z: approx. 7000mm/2050mm/2370mm. The stringer is currently retrofitted for TECC-Connect and can be converted back to the soldering process. The machine is fully functional and ready for operation. Documentation available. Inspection possible by arrangement. Ljdpfx Asz A Ei Rof Sjrt

Condition: new, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: Parmel_06202P&C, type of input current: three-phase, total width: 2,200 mm, input voltage: 400 V, working width: 1,600 mm, YORK Single-Sheet Cradle / Feeder Lrjdjyh R Htspfx Af Sst The YORK single-sheet cradle features a top-twist material feeding system that allows the material to enter the automatic cutter directly, ensuring a continuous and efficient production flow. Precision and Technology The YORK single-sheet cradle/ feeder is equipped with a full-color multilingual touchscreen control panel and dedicated control software for accurate and intuitive operation. The system can be electronically synchronized with virtually any automatic cutting machine, providing precise feeding control, reliable performance, and seamless integration into automated production lines.

Condition: used, mileage: 190,000 km, power: 90 kW (122.37 HP), first registration: 09/1998, fuel type: diesel, next inspection (TÜV): 05/2027, color: green, gearing type: mechanical, number of seats: 3, total length: 6,000 mm, Equipment: ABS, Buy online. Finance digitally. Have it delivered nationwide. ----Chat now via WhatsApp: Get in touch with our sales consultant quickly and easily. Internal ID number: [3586] The photos have been AI-edited and serve only as an example to illustrate the size and features of the vehicle. The vehicle is currently being prepared. The images will be updated. ---- Your advantages with us: * Digital consultation by phone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle, whether old or new Optionally available: * 12-60 months used car warranty (valid throughout the EU) * New inspection * New technical inspection (TÜV) & emissions test (AU) * Nationwide delivery ---- Lrsdpfoz Dm E Aox Af Set Summer offer: On request and for a surcharge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). Vehicle highlights: German vehicle Regularly maintained Immediately ready for use Technical inspection valid until 05/2027 Long wheelbase Partition 3 seats 5-speed manual transmission CD + radio ---- Would you like to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: WhatsApp: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on-site or through written assurances.

Condition: good (used), Baking racks for Heuft/Daub ovens - used - 10 levels - for 60 x 80 cm trays - good technical condition Ljdjz Az N Tspfx Af Sjrt - 20 units available - pickup from warehouse / shipping option available - price on request

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Ledpfxoz Duhxe Af Sert Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Year of construction: 2025, operating hours: 40 h, condition: ready for operation (used), functionality: fully functional, Commercial LST 60L Chocolate Melanger – 2026 – Light Commercial Use We are selling our LST 60L commercial chocolate melanger following the closure of our recently launched premium protein bar production facility in London. The machine was purchased new in 2026 specifically for our own food production and has had relatively light commercial use. It is in good working condition and is ready for production. Lodpfx Ajz Dw Arof Sert The machine has a custom-made spiral stone grinding system, designed to provide a finer and more consistent grind and improved refining of chocolate and cocoa products. It is suitable for a range of applications, including: Chocolate production Cocoa nib grinding and refining Nut butters Praline Nut-based fillings Chocolate and nut spreads Other confectionery and food applications Videos of the machine in operation are available and can be provided to serious buyers. We are closing the complete production facility, so other food-production machinery is also available, including: Protein bar extruder Automatic flow-wrapping machines Planetary mixers Blixers Chocolate processing equipment Other production and packaging equipment The equipment was purchased for our own production and is being sold due to the closure of the facility, rather than because of any issue with the machinery.

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Lredpfew Ty Hcex Af Sot Ask for specification!

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Lrsdpfx Ajztrbwef Sot

Condition: excellent (used), German RepRap 3D Printer Here, we offer a German RepRap 3D printer. The X1000 from German RepRap is a large-format 3D printer that produces objects in industrial quality. 3D Printer Data Sheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standard (PLA, ABS, PP ...) Technology: Fused Deposition Modeling (FDM/FFF) Pre-assembled: n.a. Lsdpfezd Td Ujx Af Ssrt Dimensions: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm (in.) Minimum print density: n.a. Printing speed: 150 mm/s XY precision: XY: 20 µm Max. volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Additional features: Touchscreen Type: German RepRap X1000 Condition: used Scope of delivery: (See pictures) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, This is a complete system manufactured by Key Technology in 2021 and has previously been used for grading sprouts. This is a high-capacity optical colour sorting system capable of processing up to 15 tonnes per hour, depending on product characteristics and quality requirements. Lrsdpfszltgxjx Af Sjt The system comprises of the following equipment: 1 x Elevator conveyor with blue flighted belt on fixed stainless-steel frame. Speed - Fixed. Infeed height - 750mm. Outfeed height - 3000mm. Power - 3 phase. Overall dimensions - 5500mm long x 850mm wide x 3600mm high. 1 x Vibratory shaker cleaner conveyor. Model – SH01-101652. Stroke 8, RPM – 980. Vibratory bed dimensions – 2500mm long x 800mm wide. Overall dimensions – 2700mm long x 950mm wide x 2600mm high. 1 x Optical colour grader sorter with pneumatic rejectors and HMI operator touchscreen control. Model - Tegra T01-101746. Electrical requirements – 400 V / 50 hz / 3 phase. Amps – 44.85 A. Overall dimensions – 2600mm long x 2100mm wide x 26002.1m wide 2.6m long 2.6m high. 1 x Vibratory feeder conveyor for off-take of waste product. Model - SH01-101651. Stroke 8, 18 HZ. Vibratory bed dimensions – 2500mm long x 950mm wide. Manufacturer - Key Technology.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1711, This industrial multi-blade band sawmill line (multi-head band resaw) is designed for high-volume log and timber resawing. Constructed on a robust steel frame, the machine features a highly efficient 8-head configuration, where each individual cutting unit is powered by its own dedicated electric motor for maximum performance. The machine is equipped with 15 kW motors and operates with standard 38 mm x 5025 mm saw blades. A key technical advantage of this line is its versatility: every other saw head can be tilted up to 30 degrees. This specific function allows the machine to cut diagonal FE (featheredge / weatherboard) boards up to 175 mm in width. Material feeding is handled by a heavy-duty steel chain conveyor system that ensures stable and precise timber positioning throughout the cutting process. Lrjdpfozudynsx Af Sot Manufactured in Latvia, the machine is completely ready for continuous professional sawmill operation. It is still connected and can be started.

Condition: good (used), German RepRap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical specifications: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition modeling (FDM/FFF) Dimensions: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s XY precision: +/- 0.05 mm Max. volume: 500 × 400 × 450 mm Power: 230 V AC, 50 Hz, 10 A, 2.3 kW Other features: Touchscreen Condition: used Scope of delivery: (See pictures) Ledpfx Afszg Tz Ee Sort + Filament spools (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not included! A license for the current software required to operate the printer must be purchased separately by the customer (approx. 200 euros for Simplify3D)! (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2017, Operational condition SPI machine. Ask for specification! Ledpfx Afsw Ty Rbj Ssrt

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 0011000019, We are offering this used Hunan Xing Yuan Technology Android touchscreen vending machine, manufactured in 2024, for sale. Ljdjz Dxkqjpfx Af Sert Manufacturer: Hunan Xing Yuan Technology Model: Android Touch Screen Vending Machine Year of manufacture: 2024 Condition: used Machine type: Vending machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2016, For Sale: Complete TU premix bunker installation with accessories. Lredjzlt S Ispfx Af Set Included: - 5 premix bunkers, micro-dosing system, dosing system 1400 liters per storage tank - 1 micro-dosing system with 5 storage tanks - dust extraction system - other components from Technology Unlimited It has been disassembled, but it is possible to view a similar, operational installation at our location. The installation can be viewed on-site.

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, fully refurbished, 12-month warranty, available for immediate delivery - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Supply and exhaust air with electrically actuated dampers (driven by Belimo actuators) - Supply air fan with frequency converter, controlled via regulator - Stainless steel exhaust hood - Bentrup 507 control system with thyristor control - Note: Controller language is German only; switching to other languages is not possible! - Additional drag element Type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current rating: 26 amperes - Supply voltage: 3/N/PE 400VAC Ledpfx Aetbq Eqof Ssrt - Connection type: prepared for fixed connection, 32 A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing furnace, tempering furnace, laboratory furnace, hardening furnace, ceramic furnace

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. Lsdjzbr U Ujpfx Af Ssrt We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). Lrjdpfxjzwgxro Af Sot • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh