Used Froma Mesh Welding Line for sale (15,637)

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Bdedpfx Aewu Dcxecnog Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Bsdowu Tu Dopfx Acnedg Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Year of construction: 2010, condition: excellent (used), Technical Details : - For sale Full automatic mesh welding line PITTINI / EVG - Mesh width - max. 2400 mm - Mesh length - max. 8000 mm - Dia. Longitudinal wire - max. 10 mm - Dia. Cross wire - ma. 10 mm Bdjdpfx Acsfwm D Tonsg - Max. number of longitudinal wire - 24 - Longitudinal and cross wire from spools - Cross wire feeding unit - EVG - Speed - max. 110 tacts / min. - installed power - 1,5 Mw - Automatic mesh packing unit

Year of construction: 1990, condition: excellent (used), Technical Details : – Year – 1990/2012 – Model – 8/SR12 – Speed – max. 70 tact/min. – range of opening mesh space – 25×25 – 100×100 mm – Wire range – 1,5 – 5 mm – Number of transformers – 4 x 100 kw – Mesh width – max. 1200 m Bjdpfxjd Sfgbe Acnodg – Mesh lenght – 1000 – 3000 mm On line was made new control panel and transformers in 2012

Year of construction: 1978, condition: excellent (used), Technical details : Bodolf Iqnopfx Acnsdg -Manufacturer- DRAWEBA - Model - DDANS 17 l - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Condition: used, EVG G95 Reinforcing mesh welding line 2.5x6m Welding lines for the efficient production of standard reinforcing mesh in medium to large lot sizes - Automatic and highly dynamic feeding of wires from coils - Top production speeds on single-step welding lines - Double point welding is perfect technology for thicker wire diameters Scope of supply: Full machine including stands Optional: Fixed spools up to exit conveyor Technical data: Diameter line and cross wire: 5 – 12 mm Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands for 3Ton reel Cross wire switch with doubles horizontal pay offs Tying and mat lift machine not included Diameter line and cross wire: 5 – 12 mm Bsdpfsymb Unox Acnedg Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands: for 3Ton reel Cross wire switch: with doubles horizontal pay offs

Year of construction: 2011, condition: ready for operation (used), System includes (1) Industrial Robot KUKA KR 150-2 2000 (2) Spot Welding System SPATZ (3) Camera Inspection OMRON (4) Light Barrier SICK, operational hours counter: 2602h. Bdsdpfxsgqkpmo Acnog

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Bdodpfx Acowfg Ewenjg

Condition: excellent (used), Year of construction: 2013, operating hours: 150,494 h, functionality: fully functional, GRAF welding and cleaning line, year 2013. Working direction from left to right. SL4U four-head welding machine, max. dimensions 2800 x 3200 mm, min.400 mm, flash 0.2 mm. WP CNC 2 TR cleaning machine. Cooling station. Knives for cleaning flat, grooved and smooth surfaces. It has only performed 150,494 cycles - very good technical condition. Bdjdeyyxvwopfx Acnsg

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming Bdedpfx Aouc Sw Aecneg exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Condition: used, Year of construction: 2010, functionality: fully functional, Complete KMW welding + deburring line with a turning table. 1 KMW brand 4-head welder for PVC window profiles, with an additional output conveyor. 1 Automatic deburring machine with a transfer table and automatic turning function, KMW brand. Programming is done directly on the machine via software that allows for visualization of the profiles and the overlapping of machining operations. In good working condition. Bedpsy U T Iqsfx Acnedg Manufacturer's documentation is provided, including electrical diagrams, pneumatic diagrams, and the user manual.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode Bdjdpex E Rd Dsfx Acnsg In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly Bdedpfxjzp Nz Tj Acnsg

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Bdedpfx Asvtqacocnjg Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Year of construction: 2024, condition: excellent (used), – Power – 3,5 kw – Managament – PLC Control – One Appointments Units – Run out table – 15 m ( Possibility of upgrade ) – Diameter of block – 300mm – Wire diameter range – 1.8 – 3.2 mm – 1550 N/mm2 – Ring diameter – 300 – 420 mm - possible another diameter of rings – Capacity – 52,5 m2/8h for mesh with next characteristics : Ring diameter 350 mm – 9 coils Wire diameter – 3 mm Bdsdpfx Aeyx E Haocnsg Mesh dimensions – 10 x 5 m – dimensions of mesh – 10x 5 m ( possibly longer ) depends on the weight of the final mesh – Power – 3,5 kw ( complete line ) – Number of workers – 1 per shift

Condition: excellent (used), ELUMATEC DG 342 FE / E 555-1 – AUTOMATIC DOUBLE-HEAD MITRE SAW Bedpfx Acewrpwionjdg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year: 2007 Bedpfxoxgqvtj Acnjdg - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers

Condition: ready for operation (used), functionality: fully functional, Auction of a welding and deburring line, consisting of an URBAN AKS 1610 and an URBAN SV 530! Bjdpfx Aey Szbtecnjdg The machine was overhauled in 2024! TECHNICAL DETAILS Corner welding machine URBAN AKS 1610 Welding angle: 30° - 180° Weld seam: High-quality, precise, and uniform Control: PLC control Features: Pneumatic clamping, robust construction Automatic corner cleaning device URBAN SV 530 Function: Automatic corner cleaning device Cleaning tools: Milling and cutting tools Features: Adjustable cleaning parameters Operating voltage: 230/400 V L1, L2, L3, N, PE Power: 3.5 kW Current: 6 A Fuse: 3 x 10 A Control voltage: 24 V DC

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale: SCHTEC WM740 four-head automatic welding machine, rarely used and in like-new condition, including WM620 corner cleaning automaton, cooling station, and automatic turning arm. If purchased together with the SMC350 machining center and Pressta two-head automatic screwing unit, which are also listed in your advertisements, the package price is EUR 180,000. Bsdpfsyzimcsx Acnsdg For further information, please feel free to contact me.

Condition: used, Year of construction: 2010, "URBAN" welding and cleaning line, consisting of Urban welding machine type AKS 6610/4-30/45 with Urban corner cleat machine type SV 530/B and Urban transport unit type TBA 30/48-HQ. Bsdpjy Iy Rxofx Acnodg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, year of last overhaul: 2024, Four Corner Head Welding and CNC Corner Cleaning Line STURTZ SE - HSM 30/26 Compact. The whole line works properly and well. The equipment was operational up to its uninstallation. Bedpfx Acev Uzr Esnsdg

Year of construction: 2013, condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth Bsdpfx Acsvr U Syjnjdg The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working range: 1,000 mm, For sale is a completely refurbished Schlatter radiator welding line consisting of: - Back-up ring unit (EBV) - 2-row multi-spot welding machine (hydraulic) - 2-row convector welding machine (pneumatic) - Longitudinal seam welding machine (NFR) Bdedpov Edlvsfx Acneg - Cross-seam welding machine (NQD) - Cutting shear (TS10) - Corner cutting machine (ESV) - Transverse edge closing device (QRSV) - Transport & turning device (TVW) - Nipple & spacer welding system (NIAH) - Test basin (water) Control system: Siemens S7 TIA Please note that the radiator welding line is only available in a fully refurbished condition.

Condition: used, Automatic rebar mesh welding machine MCC001 The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Minimum step between longitudinal bars: 100mm Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Bdedpfx Acoymcpyenjg Pneumatic indicators: Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: used, Stainless steel welding line MOD.70/120, made OLIMPIA 80 with tricathode welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 35 – 120 mm - Thickness : 0.7 – 3.5 mm - Length : 3 – 6 m Tube diameter: 35 – 120 mm Bjdpfx Ajvtn H Tscnjdg Thickness: 0,7 – 3,5 mm Tube length: 3 – 6 m