Used Fogo Fd 130 I-Q for sale (57,151)

Condition: used, Year of construction: 2025, operating hours: 81 h, functionality: not functional, machine/vehicle number: 5496/25, OGO generator set FD 130 I-Q – damaged in an accident – For sale is an FOGO FD 130 I-Q generator set (serial no. 5496/25), manufactured in 2025, with only 81.4 operating hours. Crodpfsz Ha A Tox Ailoh During transport, the generator set, together with the trailer, tipped over onto its left side. As a result, the soundproofing enclosure and several doors were damaged or deformed. In addition, diesel fuel leaked. The installed 4-cylinder diesel engine showed no visible mechanical damage during the inspection, but its technical functionality was not checked. Undetectable damage cannot be ruled out. Known damage: Deformation of the soundproofing enclosure Warping of the housing Broken doors on the control panel and engine compartment Diesel and minor oil traces after the accident Paint damage on the generator housing Sold in its current condition, untested, as is / where is. Inspection possible by arrangement. Ideal for repair shops, dealers, or spare parts recyclers. Sales basis Ex warehouse Neunkirchen-Seelscheid Storage costs From November 1, 2026, to be borne by the buyer.

Condition: refurbished (used), functionality: fully functional, Equipment: documentation/manual, Hello, we are offering a Thieme TSC 130 squeegee cutting machine that has been completely overhauled in our workshop. It is suitable for a maximum squeegee length of 1300 mm. In this system, the squeegee blade is trimmed thinly using a very fast-rotating special knife under a water/alcohol mixture. This is necessary if the squeegee blade has not been installed perfectly flat or if the edge of the squeegee blade is damaged and no longer prints cleanly. The advantage of cutting compared to squeegee grinding is: the rubber does not get hot and melt. You always get the same, defined edge, and virtually anyone can do it. The system is suitable for classic screen printing squeegee blades. It is not suitable for RKS squeegee blades or carbon squeegees. The system is currently located in our warehouse/workshop in 93476 Blaibach. We would be happy to take care of transport, etc. If you have any questions, please do not hesitate to contact us. Cjdpfxszyc T Rj Ailsrh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory liquidation mask production line. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for dispatch. - Cross tables available - Ink return system integrated - Lateral lift integrated, can be deactivated if required Cjdpfx Aiexqgk Uolerh The HERMETIC series can be used both as manual workstations and in automated applications. In manual operations, the machine impresses with its wide range of settings and high printing force; in automated applications, it stands out for its cam control system, which ensures a smooth and stable printing process. The absolute highlight is its drive mechanism: both the up-and-down movement of the printing pad and the forward and backward movement of the pad printing cliché are controlled by a cam disk.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Cjdpfx Aszyrpnsilsrh Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: new, Year of construction: 2022, operating hours: 3 h, functionality: fully functional, machine/vehicle number: D 24553, overall weight: 910 kg, fuel type: diesel, tank capacity: 240 l, color: grey-black, power: 60 kW (81.58 HP), output current: 80 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 52.8 kW (71.79 HP), nominal power (apparent): 66 kVA, continuous power: 48 kW (65.26 HP), continuous power (apparent): 60 kVA, total length: 2,200 mm, total width: 1,150 mm, total height: 1,400 mm, rotational speed (max.): 1,800 rpm, motor manufacturer: Iveco, type of cooling: water, number of cylinders: 4, Equipment: CE marking, ## FOGO Generator Set 60/66 kVA – Iveco Engine – Leroy Somer Generator ### Manufacturer FOGO ### Engine * Manufacturer: Iveco (Italy) * Model: NEF45SM1A * Emission Standard: Stage II * 4-cylinder diesel engine * Water-cooled Cjdpfxszk D Aho Ailorh * Power: 60 kW at 1,500 rpm ### Generator * Manufacturer: Leroy Somer (France) * Power: 60 / 66 kVA * Voltage: 230 / 400 V * Frequency: 50 Hz * AVR voltage regulation ### Control System ComAp InteliLite AMF25 * Digital control and start unit * Automatic mains monitoring (AMF) * Automatic start function * Display of voltage, current, frequency and power (kW) * Engine monitoring * Operating hour counter * Maintenance interval display * Integrated battery charger ### Technical Data * Dimensions: 220 × 110 cm * Weight: 910 kg * Fuel tank capacity: 240 liters * Fuel consumption: * 7.2 l/h at 50% load * 10.3 l/h at 75% load * Integrated spill containment basin: approx. 60 liters ### Scope of Supply * FOGO generator set 60 / 66 kVA * Digital ComAp InteliLite AMF25 control system * Fuel tank * Starter battery * Exhaust / silencer (supplied separately) ### Optional Accessories * ATS box (Automatic Transfer Switch / mains changeover) available. * Surcharge: €2,400 * Delivery time: approx. 4–8 weeks ### Display Messages Maintenance / Service * The maintenance indicator is based on the factory-set operating hours and days. Since the engine still contains the original factory oil, the maintenance indicator can be reset if desired. Warning Charger * This message appears because the integrated battery charger and the engine/coolant pre-heating system are currently not connected to an external 230 V power supply. The message will disappear after connecting the mains power. Inspection and test run are possible at any time by prior appointment. We are happy to answer any further questions by telephone or message.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Cjdpfx Aijz A D H Ujlorh Direction of rotation: Right to left Condition: As is (Very good condition) Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.

Year of construction: 1999, condition: used, Air dryer Codpfxjxqpg Ee Ailjrh

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: Credpjycv Dvofx Aileh 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Condition: used, Year of construction: 2008, We offer this used BIESSE SKIPPER 130 throughfeed machining center, year of construction 2008. Manufacturer: BIESSE Model: SKIPPER 130 Year of construction: 2008 Condition: used Category ID: 2074 Crodez H Sf Tepfx Ailoh Type ID: 151 Type: throughfeed machining center If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2007, functionality: fully functional, Controller NCT104 (Made in Hungary) Table dimensions 1800 x 1800 mm X-axis travel 3500 mm Y-axis travel 1200 mm Z-axis travel 1500 mm W-axis travel 570 mm Crsdpjyvuh Ijfx Ailsh Spindle diameter 130 mm Table rotates via CNC program Spindle taper SK50 Weight 32 000 kgs Dimensions L x W x H = 6700 x 6000 x 4420 mm

Year of construction: 2018, condition: used, Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible. Cedpfsz Hn Spex Ailerh

Condition: excellent (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, ENGEL V 330H/80V/130 Combi Cleanroom – 2-component injection molding machine, manufactured in 2006. The machine comes from pharmaceutical production and is designed for cleanroom applications. Technical data: • 33,107 operating hours • Screw diameter 25/22 mm • Machine weight 10,600 kg Codpet A Ui Aofx Ailerh Available additional equipment: • GEKU SR 500 ST robot • Safety cage • Rotary table • Conveyor belt Location: Schwaigern, Germany. Further technical documentation and an inspection can be arranged.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, spindle speed (max.): 1,660 rpm, spindle speed (min.): 45 rpm, total height: 1,700 mm, total width: 1,550 mm, total length: 1,760 mm, table width: 300 mm, table length: 1,270 mm, type of input current: three-phase, overall weight: 1,450 kg, input voltage: 400 V, workpiece weight (max.): 1,450 kg, distance table to spindle center: 646 mm, Equipment: documentation/manual, Heavy-duty universal drilling and milling machine with digital position measurement, DPA 31 Plus. Cjdpfx Aezy D Ezsiljrh

Condition: like new (used), Year of construction: 2020, functionality: fully functional, GMP Roller Laminator EXCELAM-II 355 Q Working width 355 mm, hot lamination Laminator for hot lamination films from 32 - 175 microns Infrared-heated silicone rollers, ensuring scratch-free lamination Equipped with an 8-bit microprocessor LCD display and electronic reverse function, standby function Crsdpjzwwqlefx Ailsh Temperature adjustable from 0-160 °C in 1°C increments Temperature and speed settings are pre-programmed for each film thickness The roller pressure can be precisely adjusted for each film thickness using a scale disc Max. passage height: 5 mm Adapter for 25 mm core diameter Working speed: 0-1.6 m/min, adjustable in 9 steps Connection: 220 V / 50 Hz / 1300 Watts Dimensions: W546 x D456 x H285 mm Weight: 25 kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 28,027 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Vertical machining center with a virtually new spindle (the machine received a new spindle after 23,919 operating hours)! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Y-axis: 700 mm Travel in Z-axis: 600 mm Spindle Spindle speed: 18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Internal coolant supply: 40 bar Control system Control system manufacturer: Heidenhain Control system model: Mill Plus Spindle operating hours: 28,027 h Spindle replacement at: 23,919 h EQUIPMENT NC rotary table with C-axis NC swiveling head Cjdpfxsz Hu Sij Ailjrh FD function (free-form machining) Pallet changer Infrared measuring probe for workpiece measurement Additional magazine with 120 positions

Condition: used, Year of construction: 2011, functionality: fully functional, power: 56 kW (76.14 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total height: 1,800 mm, total length: 4,800 mm, total width: 2,150 mm, Equipment: documentation/manual, Artiglio carriage with a Artiglio headrig for sale. Carriage is equipped with 3 Independent knees, positioning done by servo motors. Program for cutting and manual dimension setup done through a touch display for ease of use. Carriage forward and reverse movement controlled by pedals, carriage is driven by an on board hydro motor. Turning, clamping and manual knee positioning done with joysticks. Cables and hydraulic hoses are ran to carriage through a pantograph. Schematics and user manuals in digital and printed format. Carriage and headrig have been removed, cleaned and some restoration work done after removal. Condition wise everything is fully functional just visual wear. Currently packed, stored in a warehouse and ready for shipping. Carriage: Model - NIBBIO 1000 Length - 4.8 m Width - 2.15 m Height - 1.8 m Longitudinal speed - 0-130 m/min Maximum side opening - 1000 mm Upper jaw opening - 800 mm Distance between wheels - 1260 mm Tow rope type - S10AR Towing rope diameter - 14 mm Overall length of towing ropes - 41 m Central tank capacity. Hydraulics - 120 l Longitudinal drive - 20 HP ONBOARD HYDROSTATIC Year - 2011 Headrig: Model - ST/I 130 Main motor power - 56 Kw Total weight - 4750 kg Flywheel diameter - 1300 mm Year - 2011 Credpfsy Anp Ejx Ailjh

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. Cedpfx Aiel Dw D Eelorh At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm Crodpfx Aezlbrvoiloh - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: D 26721, fuel type: diesel, tank capacity: 450 l, color: grey-black, power: 244 kW (331.75 HP), output current: 400 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 220 kW (299.12 HP), nominal power (apparent): 275 kVA, continuous power: 200 kW (271.92 HP), continuous power (apparent): 250 kVA, total length: 3,660 mm, total width: 115 mm, total height: 2,100 mm, rotational speed (max.): 1,500 rpm, type of cooling: water, Equipment: CE marking, ## FOGO Generator Set 250/275 kVA – Sound-Insulated – Iveco Engine – Leroy Somer Generator ### Manufacturer FOGO ### Engine * Manufacturer: Iveco (Italy) * Model: NEF67TE8P * Emission Standard: Stage II * 6-cylinder diesel engine * Water-cooled * Power: 244 kW at 1,500 rpm ### Generator * Manufacturer: Leroy Somer (France) * Power: 250 / 275 kVA * Voltage: 230 / 400 V * Frequency: 50 Hz * AVR voltage regulation ### Control System ComAp InteliLite4 AMF25 * Digital control and start unit * Automatic mains monitoring (AMF) * Automatic start function * Display of voltage, current, frequency, and power (kW) * Engine monitoring * Operating hour counter * Maintenance interval display * Integrated battery charger ### Technical Data * Dimensions (L × W × H): 370 × 116 × 193 cm * Weight: 1,980 kg * Fuel tank capacity: 450 liters * Sound level: approx. 70 dB(A) at a distance of 7 m Cjdezki Atspfx Ailorh * Fuel consumption: * 24.9 l/h at 50% load * 36.4 l/h at 75% load * Integrated spill containment basin: approx. 150 liters ### Notes * Sale does not include connection cables. The cables shown in the pictures are only for testing purposes. ### Display Messages Maintenance / Service * The maintenance indicator is based on the factory-set operating hours and days. Since the engine still contains the initial oil, the maintenance indicator can, of course, be reset upon request. Warning Charger * This message appears because the integrated battery charger and the engine/coolant preheating system are not currently connected to an external 230 V power supply. The message will disappear after connecting the mains power supply. Inspection and test runs are possible at any time by appointment. If you have any further questions, please do not hesitate to contact us by phone or message.

Condition: used, Equipment: soot filter, - Crushing plant - 2009 - approx. 15,000 hours - ready for operation Csdpfx Aisy Srfcslorh

Condition: used, Year of construction: 2023, Machine No. 26, Serial No. 7271-0616, NC5+ control system, maximum clamping force 1,300 kN, conveyor system, manufacturer Colortronic, handling system, manufacturer Wittmann, type Primus 14-0704, year of manufacture 2023, safety enclosure, conveyor belt, L/W approx. 1,800 x 800 mm, skylight. Cjdpfsz H Rc Dex Ailorh

Condition: used, Year of construction: 2010, operating hours: 46,148 h, functionality: fully functional, machine/vehicle number: Roboter: 66-66458 / Steuerung: 66-66458, overall weight: 1,564 kg, load capacity: 130 kg, arm reach: 3,200 mm, ABB industrial robot with IRB 6640 M2004 (variant: IRB 6640-130/3.2) manipulator and IRC5 M2004 controller for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. The payload is 130 kg with a reach of 3200 mm; it was manufactured in 2010 and has 46,148 operating hours. The software version is RobotWare RW 5.13.1037.01. It is equipped with an ABB FlexPendant programming pendant, a connection cable set, a cable management system (dresspack) on the robot arm, and a Foundry Prime protective version with a “FOUNDRY 2” label. Cedpozal U Eofx Ailorh

Year of construction: 2010, condition: ready for operation (used), A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement. Credpey Tauhefx Aileh

Year of construction: 2022, condition: like new (used), Millipore Milli-Q ultrapure water system IQ 7000. Without cartridges. With MilliQ Q-Pod. Unused. Includes functional warranty. Crjdpfxewutuqj Ailjh

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, 3x VE20 Microbond SCI 3x New The parts have been in operation for approximately 200-300 hours. The MICROBOND CSI system, consisting of a feed unit, control system, and high-performance generator, guarantees consistent welding quality. Robust yet highly precise mechanics enable constant gap control thanks to the patented MicrogapControl gap control system. The MICROBOND control system controls and visualizes this continuous joining process. Constant amplitude output and high continuous sound power enable process speeds of up to 800 m/min. Crsdpfxsr Rdd Nj Ailsh