Used Floor Sweeper With Seat Ixsa X9, 5000 Cycles for sale (21,753)

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 760 mm, area performance: 4,000 m²/h, warranty duration: 24 months, tank capacity: 120 l, total height: 1,258 mm, total width: 834 mm, total length: 1,458 mm, water tank capacity: 130 l, operating speed: 8 mm/s, We offer for sale a new Ride-On Scrubber Dryer IXSA X9 with seat Device warranty – 24 months Battery warranty – 60 months Technical Data: • Working width: 760 mm • Machine performance: 4000 m²/h • Brush diameter (quantity): 380 mm (2) • Squeegee width: 1020 mm • Recovery tank capacity: 130 l • Solution tank capacity: 120 l • Rated power: 2100 W • Maximum gradient: 10% • Vacuum motor power: 24 V / 550 W • Brush motor power: 24 V / 2 x 550 W • Maximum speed: 8 km/h • Brush pressure: 3.5 MPa • Brush speed: 180 rpm • Pad width: 13" • Vacuum: 188 mbar • Noise level (EN 60704): 65 dB(A) • Machine dimensions (L/W/H): 1458 x 834 x 1258 mm • Machine weight (without battery): 248 kg • Lifepo4 Batteries: 25.6V 200Ah – operating time approx. 5 h • Lifepo4 Batteries: 25.6V 300Ah – operating time approx. 7 h • Possibility of opportunity charging Standard equipment for the scrubber dryers offered includes: • Neodymium disc brushes – magnet-mounted • Pad holder • LifePro extended-cycle batteries for longer run time compared to standard gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? Nodpfx Afjyaaflsascr ✅ Durability – minimal electronics ensure extended trouble-free operation ✅ 5-year warranty on lithium-ion batteries – an industry-leading guarantee of durability and reliability ✅ Greater number of charge cycles compared to gel batteries (700 vs. 5000 cycles) and longer operating life – IXSA batteries offer greater efficiency and reduced long-term replacement costs ✅ Magnet-mounted brushes – easy installation and removal ✅ Long battery runtime with short charging time ✅ Highest quality American LINATEX squeegee blades ✅ Double vacuum system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – modern technology for better results and extended brush life ✅ High surface area performance – saves time and labour costs ✅ Robust construction and low operating costs – ideal for intensive, professional use ✅ Ergonomic and intuitive operation – user comfort and easy handling

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 530 mm, area performance: 3,000 m²/h, warranty duration: 24 months, tank capacity: 60 l, total height: 1,090 mm, total width: 550 mm, total length: 1,270 mm, water tank capacity: 65 l, empty load weight: 154 kg, We offer for sale a New Scrubber-Dryer with traction – IXSA Model X7T Device warranty – 24 months Battery warranty – 60 months Technical specifications: • Scrubbing width: 530 mm (20 inches) • Squeegee width: 790 mm • Dimensions: L1270 × W550 × H1090 mm • Solution / recovery tank capacity: 60/65 L • Vacuum motor: 370 W • Brush motor: 500 W • Cleaning capacity: 3000 m²/h • Net weight: 154 kg • Working speed: 0–5 km/h • Semi-automatic drive • Battery charging time – approx. 4h (2h to 80%) • Battery operating time – approx. 4h • Battery lifespan – 5000 cycles • Option for opportunity charging Standard equipment included with the listed scrubber-dryer: • Neodymium disc brushes – magnetic mounting • Pad holder • LifePro batteries offering extended cycle life and longer runtime compared to standard Gel batteries • Charger • Linatex squeegee blades Why choose IXSA? ✅ Durability – minimal electronics used in the device ensures extended reliability and reduced risk of failure ✅ 5-year warranty on lithium-ion batteries – unmatched in the industry, confirming highest durability and reliability Ncjdpfxex U Ty Hj Afaer ✅ Greater number of charge cycles compared to gel batteries (700 vs. 5000 cycles) and longer operating time – IXSA batteries allow for more efficient use and lower long-term replacement costs ✅ Magnetically mounted brush – easy installation and removal ✅ Long operating time with short charging cycles ✅ Highest quality American LINATEX squeegee blades ✅ Dual vacuum system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – advanced technology for superior cleaning results and longer lifespan ✅ High surface productivity – saves time and reduces operational costs ✅ Robust construction, low maintenance costs – equipment designed for intensive, professional use ✅ Ergonomic and intuitive operation – user comfort and straightforward controls

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 530 mm, area performance: 2,500 m²/h, warranty duration: 24 months, tank capacity: 52 l, total height: 1,090 mm, total width: 550 mm, total length: 1,270 mm, water tank capacity: 48 l, empty load weight: 154 kg, We offer for sale a New IXSA X6 Scrubber-Dryer. Warranty on the machine – 24 months Warranty on batteries – 60 months Technical data: • Scrubbing width: 530 mm (20 inches) • Squeegee width: 790 mm • Dimensions: L1270 x W550 x H1090 mm • Solution / recovery tank capacity: 48 / 52 L • Vacuum motor: 370 W • Brush motor: 500 W • Productivity: 2,500 m²/h • Net weight: 154 kg • Working speed: 0–5 km/h • Semi-automatic drive • Battery charging time – approx. 4 h (80% charge in 2 h) • Battery runtime – approx. 4 h • Battery life – 5,000 cycles • Battery can be recharged at any cycle Nsdpfx Afex U Tvuoaecr Standard equipment included with the scrubber-dryer: • Neodymium disc brushes – magnet-mounted • Pad holder • LifePro batteries featuring increased cycle count and longer runtime compared to standard Gel batteries • Charger • Squeegee blades made of Linatex material Why choose IXSA? ✅ Durability – minimal electronic components for extended trouble-free operation ✅ 5-year warranty on lithium-ion batteries – unique in the industry, confirming highest durability and reliability ✅ Significantly higher charging cycles compared to gel batteries (5,000 vs. 700 cycles) and longer operating times – IXSA batteries provide more efficient use and lower long-term replacement costs ✅ Magnetic brush mounting – easy to install and remove ✅ Long battery runtime with short charging times ✅ Top-quality American LINATEX squeegee blades ✅ Dual suction system – leaves floors perfectly dry immediately after cleaning ✅ Neodymium brushes – modern technology for superior cleaning results and longer lifetime ✅ High productivity – save time and reduce operating costs ✅ Sturdy construction, low operating costs – suitable for intensive, professional applications ✅ Ergonomic and intuitive operation – user comfort with simple controls

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 650 mm, area performance: 3,300 m²/h, warranty duration: 24 months, tank capacity: 85 l, total height: 1,170 mm, total width: 660 mm, total length: 1,300 mm, water tank capacity: 95 l, empty load weight: 229 kg, We offer for sale a brand new IXSA X8 Ride-On Scrubber Dryer. Device warranty: 24 months Battery warranty: 60 months Technical Specifications: • Working width: 650 mm • Productivity: 3,300 m²/h • Brush diameter (quantity): 330 mm (2) • Squeegee width: 1,020 mm • Recovery tank: 95 l • Solution tank: 85 l • Rated power: 1,350 W • Maximum slope: 10% • Vacuum motor power: 24V / 500W • Brush motor power: 24V / 2x300 W • Maximum speed: 8 km/h • Brush pressure: 2.8 MPa • Brush speed: 180 rpm • Pad diameter: 13'' • Vacuum: 188 mbar • Noise level (EN 60704): 63 dB(A) • Dimensions (L x W x H): 1,300 x 660 x 1,170 mm • Weight (without battery): 229 kg • Lifepo4 batteries: 24V 200Ah. Working time: approx. 7 h • Batteries can be opportunity-charged Standard equipment for the scrubber dryers offered includes: • Neodymium disc brushes – magnetically mounted • Pad holder • LifePro batteries with extended cycle life and longer runtime compared to standard gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? ✅ Durability – minimal electronic components for increased reliability and long service life ✅ 5-year lithium-ion battery warranty – exceptional in the industry, confirming top durability and reliability ✅ Significantly higher charge cycle count vs. gel batteries (700 vs. 5,000 cycles) and longer runtime – IXSA batteries offer more efficient operation and lower replacement costs in the long term Nsdpjx U T E Nsfx Afajcr ✅ Magnet-mounted brushes – quick and easy installation/removal ✅ Long battery runtime with short charging times ✅ Premium quality American LINATEX squeegee blades ✅ Dual suction system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – state-of-the-art technology for better cleaning performance and longer service life ✅ High surface efficiency – saving time and reducing operating costs ✅ Robust construction, low operating costs – built for intensive, professional use ✅ Ergonomic, intuitive operation – user-friendly design and controls

Condition: good (used), Floor weighing scale Nsdpfx Afex Hz Dqoaecr K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Including ramp

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives Nedpfxjx Imqle Afaocr • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Year of construction: 2014, condition: like new (used), functionality: fully functional, Hilltip floor sweeper (combined with the Hilltip hydraulic power unit): Width: 180 cm Nodowiww Sjpfx Afascr Diameter: 50 cm Weight: 180 kg Hilltip hydraulic power unit (also in mint condition, unused, fully functional): Model: HPU18 (built in 2013) Motor: 18 HP (13.4 kW) Voltage: 12 VDC Weight: 190 kg

Condition: used, 35m3 heated tank with a connical bottom. The tank was used to store wine. The tanks have been lenghtened from 26m3 to 35m3. 3 units available. Ncedpfsun Nvbjx Afaer

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 83 kW (112.85 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,230 kg, input voltage: 400 V, total width: 830 mm, total length: 1,840 mm, total height: 2,030 mm, warranty duration: 6 months, Aircooled chiller KKT cBoxX 90 83 KW Cooling capacity: 83 kW / 23.6 tons (tw2=20°C / tu=32°C ) Year of manufacture: 2021 Options: Hydraulic module Refrigerant circuit: 1 pcs. Ncedpfx Asy D H Dkjfaer Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSH161A4ALD (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos ML90HA-J-H3-CML2A + 1 pcs. Grundfos ML132DA-J-H3-CML4A, buffer tank (open-type). Dimensions: 1.84x0.83x2.03 m. Weight: 1230 kg. Working hours: 1/1 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Baking oven with 4 floors, hood and stand Ncsdpfeuuagwex Afasr Dimensions: 165x155x215cm Electric power: 10.5kW

Condition: used, Bakery Oven with 4 floors and a fermentation chamber Dimensions: 115x120x200cm Ncsdpfx Asuuairjfasr Electric power: 42kW Capacity: 2 trays x 60x80cm

Condition: good (used), Year of construction: 2009, Stäubli t TX90 L with Controller CS8C. (2009) Number of axis: 6 Payload: 5 kg Nedjv Hdk Ispfx Afaecr

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Ncodpfx Aoyizxrofaor Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg Njdpfx Afey Ehnaeaecr High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space volume: 15 m³, total length: 10,200 mm, total width: 2,500 mm, total height: 3,940 mm, suspension: air, tire size: 275/75R22,5, wheelbase: 7,020 mm, color: white, Year of construction: 2024, = Additional Options and Accessories = Ncedpoxv Ry Rofx Afaer - Air suspension - Central lubrication = Remarks = The Wattsnew E-Box concrete mixer is an electrically driven concrete mixer. The drive unit (E-Box) is installed in place of the diesel engine and supplies power to the existing hydraulic pump as usual. Everything else remains the same, except the hydraulic pump is powered by an electric motor instead of a combustion engine. You can also easily electrify your existing concrete mixer trailer by removing the diesel engine unit and installing the E-Box. Thanks to its intelligent software, the E-Box uses little power and is extremely easy to operate. With just one button and one lever, you control the entire system. Charging is also very straightforward: after a workday, simply connect the E-Box to a charging station or a regular power outlet, and the batteries will be fully charged in five hours. The Wattsnew E-Box is completely emission-free. This means no air pollution from diesel exhaust, allowing you to work in a clean and safe environment. Local residents will also appreciate your use of an emissions-free and much quieter machine. Using electric vehicles and machinery in construction increases your chances of being awarded contracts, as customers and governments are increasingly demanding zero-emission equipment. Further information: = Further Information = General Information Year of manufacture: 2024 Applications: Construction and road building Material to be used: Concrete Registration number: OT-93-FF Axle configuration Tyre size: 275/75R22.5 Suspension: Air suspension Rear axle 1: Twin tyres; alloy wheels; max. axle load: 10,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 2: Twin tyres; alloy wheels; max. axle load: 10,000 kg; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 3: Twin tyres; alloy wheels; max. axle load: 10,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Weights Unladen weight: 11,440 kg Payload: 31,560 kg Gross vehicle weight: 43,000 kg Functional Body manufacturer: Stetter AM 15000 Number of chambers: 1 Water installation: Yes Water tank: 500 l Hoses: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Financial Information Price: On request = Company Information = Our complete range can be found here:

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 09/2021, loading space length: 8,250 mm, loading space width: 2,480 mm, total length: 10,850 mm, total width: 2,550 mm, suspension: air, tire size: 245/70-R17.5, wheelbase: 5,910 mm, Year of construction: 2021, = Additional Options and Accessories = - Stake pockets = Notes = Very nice 2021 FLOOR AXD.330 3-axle trailer with ABS/EBS, SAF axles (3 x 10,000 kg) with drum brakes, hot-dip galvanized, 2nd axle is a lift axle, aluminum side boards (60 cm high), hardwood floor, floor height: 90 cm, various stake pockets + 4 stakes and lashing rings, towing eye (40 mm) adjustable by 60 cm, 2x raise/lower valve, unladen weight: 6,210 kg, max. weight: 30,000 kg, 245/70-R17.5 tires (L: 7/8 mm, 4/4 mm, 4/1 mm; R: 7/7 mm, 3/3 mm, 3/2 mm), Dutch registration = Further Information = Axle configuration Tire size: 245/70-R17.5 Axle brand: SAF DRUM Brakes: Drum brakes Suspension: Air suspension Njdpfx Afex U Ed Rjaecr Front axle: twin tires; Max. axle load: 10,000 kg; steered; left inner tire tread: 50%; left outer tire tread: 45%; right inner tire tread: 45%; right outer tire tread: 45% Rear axle 1: twin tires; lift axle; max. axle load: 10,000 kg; left inner tire tread: 25%; left outer tire tread: 25%; right inner tire tread: 20%; right outer tire tread: 20% Rear axle 2: twin tires; max. axle load: 10,000 kg; left inner tire tread: 10%; left outer tire tread: 25%; right inner tire tread: 20%; right outer tire tread: 20% Weights Unladen weight: 6,210 kg Payload: 23,790 kg Gross vehicle weight: 30,000 kg Functional Body make: FLOOR AXD.330 Extendable body: Yes Condition Technical condition: very good Optical condition: very good Identification Registration number: 75-WBN-9 Further information Please contact Arne Honingh for more information.

Condition: like new (used), Miwe condo 80x60 stonefloor oven with steam function in good working condition if you have further questions please sent an request Ncodsumm Nvopfx Afajr

Condition: used, mileage: 67,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 03/2023, next inspection (TÜV): 02/2026, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, Special equipment: Njdsy Dnm Tspfx Afascr Business Package Navigation, Vehicle without model designation, Special paint finish Urano Grey solid Additional equipment: Storage pocket on front seat backs, Passenger airbag deactivatable, Driver and passenger airbags, LED ambient lighting, Traction control (ASR), Auto Hold function, Electrically adjustable, heated and folding exterior mirrors with tilt-down function, Grey exterior mirrors, Sunglasses compartment, Black headliner, Roof rails, Aluminium entry sills, Electronic differential lock (XDS), Driver assistance system: Adaptive Cruise Control (ACC), Driver assistance system: Driving profile selection (SEAT Drive Profile), Driver assistance system: Fatigue detection, Driver assistance system: Lane Keeping Assist, Driver assistance system: Surround Monitoring System (Front Assist) with City Emergency Braking, Electric windows front and rear, Full Link (MirrorLink, Apple CarPlay and Android Auto), Function Package, Front footwell lighting LED, Luggage compartment cover/roller blind, Illuminated glove compartment, Rear LED taillights with dynamic light strip (Infinite Light), Rear spoiler, Interior: Chrome applications, Interior mirror with automatic dimming, ISOFIX child seat anchorage points, Body: 5-door, Air conditioning Climatronic 3-zone, Driver's knee airbag, Digital instrument cluster (virtual cockpit), Head airbag system, Rear headrests (3x), Black radiator grille, Variable and removable load compartment floor, Manually adjustable lumbar support left front seat, Manually adjustable lumbar support right front seat, Multifunction sports/leather steering wheel, Headlight range adjustment, Light assistant (Coming Home, Leaving Home), Alloy wheels, Front center console with center armrest, Cup holder, Storage box and rear air vents, Engine 2.0L - 110 kW TDI, LED fog lights, Emergency call system, Aluminium pedal caps, Wheelbase 2790 mm, Tyre pressure monitoring system, Sliding rear bench seat, Low-emission under Euro 6d standard, Gear lever/selector lever grip leather, Full LED headlights, Side airbag, Tinted rear side and rear windows, Service system: Remote Services (SEAT Connect), Driver's seat electrically adjustable (with memory), Height adjustable driver's seat, Height adjustable passenger seat, Seat upholstery: Fabric / Alcantara, Illuminated sun visor left, Illuminated sun visor right, Front sports seats, Start/stop system, 12V socket front, FR-design bumpers, Lashing eyes in luggage/load compartment, Heat-insulating glazing. Interior mirror with automatic dimming, Tinted rear side and rear windows.

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Njdpfoyzt Nzex Afaecr Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit.

Condition: excellent (used), machine/vehicle number: XLT0000000W021674, axle configuration: 3 axles, first registration: 05/2005, color: other, Year of construction: 2005, Equipment: crane, XLT00000W021674 = More information = Nsdpfeymrpvox Afaocr Rear axle 1: Steering Rear axle 2: Steering GVW: 39.000 kg Lifting capacity: 16.000 kg Crane: KENNIS TYPE16.000, year of manufacture 2010 Make of bodywork: KENNIS TYPE 16.000 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, maximum load weight: 21,070 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 06/2008, next inspection (TÜV): 10/2026, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2008, Further information: * Empty weight: 8,930 kg * Type | First axle: Dunlop R * Tyre size | First axle: 385/65 R22.5 * Tyre tread depth inside left | First axle: 70% * Tyre tread depth inside right | First axle: 70% * Maximum axle load | First axle: 9,000 kg * Type | Second axle: Dunlop R * Tyre size | Second axle: 385/65 R22.5 * Tyre tread depth inside left | Second axle: 100% * Tyre tread depth inside right | Second axle: 100% Nsdpfx Aey A Dm Tefaocr * Maximum axle load | Second axle: 9,000 kg * Price on request: Yes * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension Additional equipment: * Homepage * Tail lift * Steering axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please enquire in advance regarding procedures and costs for your specific country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale, and errors. --- Stated prices are exclusive of BPM and apply for export only.

Condition: refurbished (used), Year of construction: 2015, Durst P10-200 with Corrugated Option, fully automatic Resolution: 10 pl - 1000 dpi Color: 6C + (optional White) Very low usage Speed up to 2025 m2/h Fully automatic loader (feeder) Ncodpfx Afsy Amckjajr Fully automatic unloader (stacker) INK: Paper and board with very low odor Options: Corrugated Option with 2 rails for dropping down material Corrugated static bar for different material thicknesses Corrugated software to control media and thickness - Understatic bar and automatic media stop for crash prevention - Caldera Rip Software Demo video is from Durst Rho 750 (28 pl, 600 dpi)

Condition: used, machine/vehicle number: XLT0000000W020149, axle configuration: 2 axles, first registration: 01/2000, tire size: 275/70, color: other, Year of construction: 2000, Equipment: ABS, = Additional options and accessories = - Air Suspension - Side Doors = More information = Njdpfoyzyu Rjx Afascr Tyre size: 275/70 Make axles: BPW Rear axle 1: Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Steering; Tyre profile left: 30%; Tyre profile right: 30% Empty weight: 11.320 kg Carrying capacity: 20.680 kg GVW: 32.000 kg Ask about the lease options Registration number: OG-25-FL

Condition: used, axle configuration: 2 axles, first registration: 05/2001, total length: 8,600 mm, total width: 2,600 mm, total height: 3,900 mm, suspension: air, tire size: 275/70R22,5, wheelbase: 7,510 mm, color: other, Year of construction: 2001, Equipment: ABS, tail-lift, = Additional Options and Accessories = Ncedpsyu Hzpefx Afaer - EBS - Tail lift = Remarks = Number of axles: 2, twin wheels, payload: 23,280 kg, unladen weight: 8,720 kg, gross weight: 32,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: air suspension, ABS, EBS, body year: 2001, axle type: BPW, tail lift, tail lift type: rear flap, tail lift capacity: 1,500 kg, tail lift material: steel = More information = General information Cab: Day cab Registration number: OG-63-PX Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle configuration Tyre size: 275/70R22.5 Brakes: disc brakes Suspension: air suspension Axle 1: twin wheels; left inner tyre tread: 6 mm; left outer tyre tread: 5 mm; right inner tyre tread: 6 mm; right outer tyre tread: 5 mm Axle 2: twin wheels; steered; left inner tyre tread: 6 mm; left outer tyre tread: 6 mm; right inner tyre tread: 7 mm; right outer tyre tread: 3 mm Weights Unladen weight: 8,720 kg Payload: 23,280 kg Gross vehicle weight: 32,000 kg Functional Tail lift: rear flap, 1,500 kg Environment Emission class: Euro 0 Condition General condition: moderate Technical condition: moderate Optical condition: moderate Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, fast-changing inventory • Recognisable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The assurance of "recognisable quality" • And more… Please visit our website for special offers and the complete inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an enquiry via our website. Ask us directly about our European warranty package.

Condition: good (used), Perfecta BSB 3L Paper Jogger with Roller Nsdsyur Hqspfx Afaecr The machine is 100% functional and in perfect condition. This is the latest design from a German manufacturer. Year of manufacture: 2016. Technical specifications: Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Power supply: 400V Air squeezing roller Air table with micro-perforation Tilt angle adjustment Jogging frequency adjustment (inverter) Adjustable force and speed of the air squeezing roller. Chrome-plated table surface Full documentation set.