Used Fliegl Sds 470 T Mit Radmulden for sale (73,624)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, Low-loader Semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without lateral support Foldable rear support 2 chock blocks with holder Aluminum side protection Fender fairings in front of and behind the axle assembly 1st pair of wheel recesses integrated into the gooseneck area in the low-bed section, angled for easy entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader models with detailed specifications (if the overall height is exceeded). Wheel recess cover, retractable from the main frame, with wood inserts. Extensions retractable to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for timber planks on the gooseneck, across the front Timber planks, 70 mm, for extension to 3000 mm Tie-down points for low-loader 2 pairs of ring-type tie-down points, 5 tons each, at the front on the gooseneck 11 pairs of tie-down eyes integrated into the top and side of the outer frame, 10 tons each 2 x on the gooseneck, 9 x distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing between tie-down points not greater than 1100 mm 8 pairs of stake pockets integrated into the outer frame, inner dimensions 70 x 40 mm, or, instead of stake pockets, 5-ton ring-type tie-down points embedded in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 keyed coupling heads at the front With raise and lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; truck must be suitably pre-equipped. Vehicle - Driving Stability System Lrodpfx Ahei Ri Hcokor Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front 1 x LED rotating beacon with holder, switched via side lights 2 pairs of warning signs, double LED illuminated and retractable to 3,000 mm, detachable with connector Floor Gooseneck with steel/non-slip steel plate Storage box integrated into the access slope to the gooseneck Then with 70 mm softwood floor, in the wheel recesses at the bottom and in the wheel well area, steel/non-slip steel plate Low-loader platform including rear slope, 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, side-shiftable Additional ramp securing at the bottom.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. Lrjdpjzt Ai Ejfx Ahkor the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Lrjdpjyq Rdysfx Ahksr Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. Lrodpfxjwcgr Ej Ahkor FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: used, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, first registration: 08/2019, next inspection (TÜV): 09/2024, total length: 7,460 mm, total width: 25,500 mm, total height: 38,000 mm, suspension: air, tire size: 385 / 65 R 22.5 / 5mm, front tire size: 385 / 65 R 22.5 / 5mm, operation weight: 38,000 kg,

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to individual customer requirements. Chassis, Fifth Wheel, and Transport Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing straps, 24-ton capacity, two-speed landing gear, single-sided operation, lashing eyes, yellow marked, 2 of which are located at the rear as towing eyes, container locking: 4 pairs of container locking mechanisms embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, pocket recesses embedded in the outer frame, 80 x 80 mm internal dimensions, pocket recesses embedded in the center of the floor, 80 x 80 mm internal dimensions, plug-in crossbars B=80/ D=80/ L=1200 mm, hot-dip galvanized, lashing eyelets embedded in the outer frame, 5 tons each, 2 storage boxes b= approx. 1230 / h= approx. 450 mm, closed and mounted across the entire width in front of the axles, replacing side impact protection, front locking mechanism can be inserted as a pin, lashing/crossbar rails embedded transversely in the floor across the entire width to the outer frame, approx. 100 mm high, with 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel), with angle sheet at the bottom as a closure, open halfway downwards for lashing and inserting crossbars 80 x 80 mm, storage compartment for warning signs, open, as technically possible. Axles and Suspension SAF disc brake axles, "axles/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brake", 2 driving heights, can be switched over via hand knob: 1 x for saddle height 1120 mm 1 x for saddle height 1200 mm Braking System 2-line compressed air braking system, color-coded lines for easy maintenance, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, EBS, electronic braking system with EBS socket at the front, with lifting and lowering valve, vehicle - driving stability system Wheels and Tires 385/65 R 22.5", steel rims, factory silver Electrical System 24 Volt, 4 x 3-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs double LED illuminated, extendable to 4500 mm and removable with plug. With additional holder at the rear Ledpfjzb Iu Djx Ahkerr Additional 7-pin socket (according to ISO 1724) in the underride guard at the rear Floor Sieve-printed panels approx. 30 mm thick, transverse impact protection with omega inserts, on longitudinal cross members for high point load capacity for forklift axle load up to max. 7100 kg Front Wall / Front Corner Posts 25 mm aluminum hollow profile, 1650 mm high, corner posts steel in volume design Front wall additionally covered with 1250 mm high sieve-printed panel on the inside "Crash blocker", at the bottom inside at approx. 140 mm height with steel ram protection Storage compartment for plug-in crossbars 80 x 80 on the inside of the front wall Painting Frame: Hot-dip galvanized including passivation or pa

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027 Identification Registration number: ON-68-FS Lodpfx Ahjzvchtskerr

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,350 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Lrsdpfx Aoi Ri E Ushkor Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with interchangeable 2 kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight connection plate, with stroke compensation Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Splash guards in front of the 1st axle and behind each axle with anti-spray, according to EC Toolbox, stainless steel, w=600/h=400/d=500 mm, with polished door, lockable Hydraulic lift table after gooseneck, approximately 3000 mm long, hydraulically raised for crossing the gooseneck, with mechanical locking in the raised position. Operated with a wireless remote control Electric winch, 24 volts, pulling force 8165 kg, mounted centrally at the front on the gooseneck loading area, in a stainless steel box with a door (if technically possible, further review required), operated with a wireless remote control, cable length 35 m x approx. 10 mm, with roller cable guide and removable guide rollers on the gooseneck and rear slope. Tie-down points: Low-loader Gooseneck: 5 pairs of tie-down points recessed in the outer frame, each with 5 tons. 2 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame in the neck slope, each with 10 tons. Main platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 4 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Rear platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 5 pairs of tie-down points in the middle, each with 5 tons. 4 pairs of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last axle with steered trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a hand button Air suspension with lift/lower valve, with holding function for lowering + auto-reset function Wheels and Tires 235 / 75 R 17.5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air brake system Spring brake parking brake Vehicle - Driving Stability System Axle load recognition via EBS-CAN bus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) 2 fail-safe coupling heads in front, without connection cable EBS, Electronic Braking System with EBS socket in front, without connection cable Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights in front 2 white/red side marker lights in the rear Lights completely in LED version 2 x 7-pin and 1 x 15-pin fail-safe sockets in front Additional LED work lights, at the rear, switched via reversing light LED rotating beacon with holder, switched via parking light Pair of warning signs, double LED illuminated and extendable to 3000 mm Floor Gooseneck with Mega Grip, covered with interlocking grating/low-loader platfo

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 26,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Lrodpfx Aji Ri E Rshker Chassis, low-bed semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions, 24 tons, 2-speed landing gear, single-sided operation, with straight lower section, without thrust compensation Rear support, foldable 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear, covering the entire width Fenders in front of the 1st axle and at the rear of each axle with anti-spray, according to EC Extendable widening elements to 3,000 mm (not in rear slope) Storage compartment for timber planks in the center of the loading area Timber planks 70 mm for widening to 3,000 mm Tie-down points, low-bed 2 pairs of ring tie-down points, each 5 tons, at the front on the gooseneck 11 pairs of tie-down mushroom heads, recessed at the top and side in the outer frame, each 10 tons 2 x on the gooseneck 9 x distributed in the low-bed area First tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 8 pairs of beam pockets recessed in the outer frame, inner dimensions 70 x 40 mm (can be converted to 5 ton ring tie-down points) Axles + Suspension SAF drum brake axles Air suspension Wheels and tires 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Color-coded line routing for easy service. Spring parking brake EBS, electronic brake system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front, without connection cable with lift and lower valve Axle load recognition via EBS-CAN bus signal, for display on the instrument panel in the cab Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable 1 LED rotating beacon with holder 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel sheet covering Storage box recessed in the ramp to the gooseneck followed by 70 mm softwood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm softwood floor Low-bed area including rear slope 9,200 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with SVK socket NW 10/3, without connecting hoses Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: used, maximum load weight: 28,933 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Edscha sliding roof * Haldex EBS, ABS, LSV * Lift axle * Toolbox * BPW Eco Plus axles with disc brakes ----* Tire size: 385/55R19.5 * Total length: 13,850 mm Lrsdpfxsvhvcfj Ahkor * Unladen weight: 6,067 kg * TÜV & SP: expired -----Subject to errors & prior sale Vehicle number 5726 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, maximum load weight: 28,933 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Edscha sliding roof * Haldex EBS, ABS, LSV * Toolbox * BPW Eco Plus axles with disc brakes Lsdpfxjvhv H Rj Ahksrr ----* Tire size: 385/55R19.5 * Overall length: 13,850 mm * Own weight: 6,097 kg * TÜV & periodic inspection: expired -----Subject to errors and prior sale Vehicle number 5732 WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, axle configuration: 3 axles, first registration: 06/2013, color: other, Year of construction: 2013, Please contact us for more information. Lrsdpfx Ahjzvbfdsker

Condition: used, axle configuration: 3 axles, first registration: 07/2013, suspension: air, tire size: 385/65, tire condition: 30 %, color: other, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Disc brakes = More information = Tyre size: 385/65 Make axles: BPW Tyre profile: 30% Brakes: disc brakes Lrodpfszvdp Sex Ahkor Suspension: air suspension

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Additional Information Chassis, Saddle, Haulage Company Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins, rear slope to approx. 1920 mm, continuous lashing rail for ramps at the rear and front on the gooseneck, sliding rollers at the rear, low-bed to the axle group after the slope. Drawing approval required from the customer in case of an order! Pair of lashing points recessed in the outer frame at the top and side, 10 tons each. Pair of lashing eyes recessed in the outer frame on the gooseneck, 5 tons each. 24-ton, 2-stage support winch, single-sided operation, with straight lower part, without stroke compensation. Foldable rear support, mounted externally. Wheel chocks with holder. Aluminum side impact protection. Steel underrun protection for EC, if technically possible. Quarter panel fenders. With anti-spray flaps according to EC. 1 pair of wheel recesses recessed in the low-bed area after the gooseneck, sloped for entry. Length at the bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on the rear slope. Depth approx. 200 mm. Note: Frame in the main beam area is 200 mm higher than the wheel recess. A detailed technical review is still required in case of an order. Wheel recess cover retractable from the low-bed with hardwood inserts, on the rear slope with hardwood inserts. Electric winch, 24 Volt, pulling force 5500 kg, mounted in the slope of the gooseneck, does not reach into the loading area, operation with wireless remote control, rope length 35 m x approx. 10 mm, with roller rope guide and detachable guide roller on the rear slope. Axles + Suspension SAF or BPW drum brake axles at our discretion. Air suspension with lift and lower valve + auto-reset function. Wheels and Tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 tons tire load capacity at max. 90 km/h. At the manufacturer's choice. Steel rims in twin arrangement, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line. EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable (brake calculation sent to the customer for approval. 07/15/2021). Ljdei Ri Hrspfx Ahkorr Attention: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scale). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Floor Gooseneck with steel / checkered plate covering. 30 mm sieve floor, in the low-bed between the longitudinal beams in the middle. In the wheel track area covered with toothed grating, in the wheel recesses with steel / checkered plate covering. Ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg. Pair of steel ramps for entry into the low-bed. Pair of steel ramps for driving onto the gooseneck. Side boards Approval / Signs Country of registration: Germany With DEKRA approval and certificate (according to §13 EC - FGV). Prepared for single-row license plate holder. Contour marking with reflective strips according to ECE R 048, yellow on the

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Lrjdei Rixkepfx Ahksr Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: used, axle configuration: 3 axles, first registration: 07/2005, color: other, Year of construction: 2005, Empty weight: 4.200 kg Axle 1: left 4-8 mm right 10-10 mm Axle 2: left 10-10 mm right 12-12 mm Axle 3: left 4-8 mm right 4-4 mm Lrsdeywtctjpfx Ahkjr We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 09/2011, color: other, Year of construction: 2011, Empty weight: 5.100 kg Lredszp Hc Ijpfx Ahker Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,070 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 990 mm, total length: 13,990 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with 2 interchangeable kingpins and 2 kingpin positions Container Mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Center telescopic stage 1, rear extension extended to stage 1: 2 x 20-foot or 1 x 40-foot, with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended, 2nd stage: 1 x 45-foot container with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic system as a telescoping central tube frame with bolt locking mechanism with rear height adjustment and foldable center supports for containers without tunnels Container guide at the front, plug-in and removable Plug-in adapter for front locking, to secure containers without tunnels from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank Lodpfoi Ri R Ssx Ahksrr 24-metric-ton, 2-speed support jack, single-sided operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist; operated by 3 brakes (start-up assist functions up to a 30% axle load exceedance and at speeds up to 25 km/h) Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Type Approval pursuant to EC Directive 2007/46

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,680 kg, maximum load weight: 35,320 kg, overall weight: 50,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,520 mm, loading space height: 600 mm, total length: 15,400 mm, total width: 2,550 mm, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Folding rear support 2x chock blocks with holder Aluminum side impact protection Quarter panel fenders in front of and behind the axle assembly with splash flaps behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted crosswise at the front on the floor of the gooseneck, with 2 storage trays Extendable widening elements up to 3,000 mm (not in rear slope)(However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on the gooseneck, at the front, crosswise Wooden planks 70 mm for widening to 3,000 mm Excavator arm recess starting above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Tie-down points: Low-loader 3 pairs of tie-down points, each 10 tons, at the front of the gooseneck, 8 pairs of tie-down points, each 10 tons, in the low bed, 3 pairs of tie-down rails in the wheel track area of the low bed, 3 pairs of tie-down points, each 10 tons, in the axle/rear area Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption with steering axle Air suspension Wheels and tires 235 / 75 R 17.5 as chosen by the manufacturer Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake Lrjdsi Ri Hgepfx Ahksr EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, without connecting line with lift & lower valve, hold function in the lowered position + auto-reset function Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Vehicle - Driving stability system Trailer Info Center, for displaying vehicle data such as axle loads (no calibrated scale), mileage and diagnostic/system messages Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1x additional LED work light at the rear 1x LED rotating beacon with holder, switched via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel/diamond plate covering in the wheel track area with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering, low bed on the left and right in the wheel track area can be hydraulically raised for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Low bed length approx. 6,300 mm Side walls 25 mm aluminum hollow profile, 400 mm high, can be plugged into the front and side on the gooseneck Ramps Steel ramps 2,800 mm long, 750 mm wide Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown i

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, Saddle, and Haulage Company Fine-grained steel welded construction in lightweight design, saddle plate with interchangeable 2 kingpins, main frame reinforcement for 25 tons, with center of gravity at 3 m load length in the retracted state. 13 pairs of hooks for securing lashing straps, welded onto the crossbeams 23 pairs of lashing eyes recessed into the outer frame, each 3.5 tons Outer frame with Load-Lock profile for attaching lashing straps Note! Not usable with sideboards! 24 tons, 2-speed support winch in reinforced design for loaded coupling/uncoupling, single-sided operation Chocks with holder Aluminum side impact protection Under-run protection Half-shell fenders with anti-splash flaps according to EC Lrodpfxsi Ri Szs Ahkjr 1 spare wheel holder for 1 tire, with wheel fastening kit 1 closed storage box for stakes, open at the top, below the loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 6 pairs of pull-out stake pockets, for rectangular section stakes 80x80 mm, extendable from loading width of 2000 mm to 3100 mm 4 pairs of stake pockets recessed into the outer frame, for rectangular section stakes 80x80 mm 11 stake pockets recessed in the center of the floor, for rectangular section stakes 80x80 mm, with reinforcement beam, installed between the outer stake pockets 5 x 3 pairs of stake pockets recessed into the outer longitudinal beams, for rectangular section stakes 80x80 mm, including reinforcement beams - for load securing to the front and rear during the transport of reinforcing steel mats, 2x5000 mm or 2x 6000 mm 6 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning 12 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: Stake pockets/plug-in stakes are not designed for the sole securing of long materials, pipes, etc. without strapping. 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 steel winches with wire rope and clevis hook, with rope guide through the outer frame, 1 removable gearhead for steel winch - supplied loose Telescoping Main frame telescoping extendable by a maximum of 4,000 mm and lockable every approx. 500 mm Locking with pneumatic pin locking + indicator for frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the control panel on the left side in front of the axles Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand knob, as well as manually via switch in the towing vehicle (Pin 10), without truck installation. Axle track offset mm Air suspension 1st axle automatic lift axle, additionally electrically operable from the truck, with starting aid Braking System 2-line compressed air braking system Colored line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front EBS manufacturer according to the manufacturer's choice, electronic braking system with EBS

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change Lredpfoyktv Sox Ahkor ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: used, axle configuration: 3 axles, first registration: 03/2011, total length: 12,100 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 9,250 mm, color: other, Year of construction: 2011, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 36,200 kg, Tare weight: 5,800 kg, Gross vehicle weight: 42,000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, EBS, 2X 20, 1X 30, 1X 40 FT HIGHCUBE // DISC BRAKES // LIFT AXLE = Further Information = General Information Cab: Day cab Registration number: OL-43-HP Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Lrsdpfx Aey U U R Hshkor Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Lift axle; Tire tread depth left: 5 mm; Tire tread depth right: 10 mm Axle 2: Tire size: 385/55R22.5; Tire tread depth left: 8 mm; Tire tread depth right: 10 mm Axle 3: Tire size: 385/65R22.5; Tire tread depth left: 2 mm; Tire tread depth right: 2 mm Weights Unladen weight: 5,800 kg Payload: 36,200 kg GVW: 42,000 kg Environment Emission class: Euro 0 Condition Overall condition: very poor Technical condition: very poor Optical condition: very poor Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H Lodsykugxspfx Ahkjrr - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,480 mm, loading space height: 3,040 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis Steel welded construction with narrow crossmember spacing and reinforced design, low-loader outer frame profile, for transporting construction machinery up to 32,000 kg and with a maximum outer width of the construction machinery of 2550 mm, kingpin plate with replaceable 2 kingpins. Rear slope of approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/diamond plate, in the low-bed, omega rail laterally at the bottom on the outer frame as a mounting rail for tarpaulin and spacers for lashing points, not in the wheel area. If a lift table is used, there is an additional, lightweight outer frame with an omega profile. 24-ton, 2-speed landing gear, single-sided operation, with a semi-circular lower part and a straight connection plate, with stroke compensation, free swivel radius to the rear approx.: 1950 mm, rear support, foldable Ledpfxji Riw As Ahkjrr 2 wheel chocks + holder Side underrun protection, aluminum Quarter panel fenders in front of and behind each axle with anti-splash flaps behind each axle Underrun protection, steel Splash flap at the rear over the entire width 4 storage boxes, stainless steel, w=800/h=350/d=350 mm, with a polished, lockable door, 2 x on the left front and 2 x on the right front in front of the 1st axle Lift table behind the gooseneck, approx. 3000 mm long, hydraulically liftable for crossing over the gooseneck, with mechanical locking in the raised position. (Cylinder angled for good ground clearance, Fliegl standard). Operation on the right front + additional activation with a wireless remote control, lift table can be raised with the tarpaulin closed! Tarpaulin attachment in the lift table area to an additional, lightweight outer frame with omega profile, lift table can be raised with the tarpaulin closed! Lashing points can also be used in the lowered position! Lashing points Gooseneck: 4 pairs of 5-ton lashing points embedded in the outer frame 2 pairs of lashing points at the top and on the side embedded in the outer frame 8 pairs of lashing points at the top and on the side embedded in the outer frame, each 10 tons 9 pairs of 5-ton lashing points embedded in the outer frame Axles + Suspension SAF drum brake axles last axle with trailing steering knuckle, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lifting and lowering valve + auto-reset function H&S function with quick vent 1st axle, automatic lift axle, incl. forced lowering and starting assist, activated by pressing the brake pedal 3 times (starting assist is functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Axle lift below the recommended ride height, no guarantee for tire damage Wheels and tires 235/75R17.5 from leading manufacturers Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring brake parking brake 2 foolproof coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Axle load recognition in the truck via EBS, without installation in the truck. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2013, loading space length: 13,600 mm, loading space width: 2,520 mm, Equipment: ABS, Schmitz Cargobull S01 Platform, Lift Axle, Aluminum Side Walls, Runge STEEL TRANSPORT Int. No. for inquiries: 0326236 * ABS * EBS * 3-axle, air-suspended * Lift axle * Disc brakes * BPW axles * Aluminum side walls * Runge Cargo space length: Length: 13,600 mm * Width: 2,520 mm Tires: 1st axle: 385 / 65 R 19.5, 20% air-suspended / lift axle 2nd axle: 385 / 65 R 19.5, 20% air-suspended 3rd axle: 385 / 65 R 19.5, 20% air-suspended ----Price: EUR 7,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: * Ljdjyulw Nepfx Ahkerr We speak: German, English, French, Polish, and ??? Subject to typing errors, errors and prior sale.