Used Flame Lamination Line, 2,000 Mm Working for sale (95,833)

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. Fpodpfx Aksz E S Hhoysn The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Year of construction: 2003, condition: excellent (used), functionality: fully functional, Manufactured in 2003, this machine remains in excellent technical condition thanks to proper maintenance and care. It offers a versatile configuration with a working width of 1,900 mm. Fpsdpfx Aksz E S H Ijyen The line is equipped with: • Raw material unwinding stations • J-box for face materials • Powder scattering unit • IR heating station • Lamination head • Cooling system • Tension control system • Central winding unit A key feature is the additional upper pressing roller, which enables the production of 3-ply laminated composites in a single pass. Depending on the application, the machine can bond layers using thermoplastic adhesive supplied in roll form, thermoplastic powder, or a combination of both.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, working width: 1,600 mm, total length: 75,000 mm, total width: 17,000 mm, Technical Details: Fpedpeyv Hzgofx Akyen Cefla painting/finishing line with roller coating machines for panel finishing *Maximum working width: 1650 mm *Automatic loading system with integrated robot *Line dimensions: 75 x 17 m *Line configuration: *3 x Cefla Smartclean 32-B brush cleaning machines *3 x Cefla Smartcoater MF Evo roller coating/painting machines *1 x Cefla Smartcoater SP1 Evo finishing machine *2 x Cefla UV-R M1 1600 UV curing tunnels (1 UV lamp each) *1 x Cefla UV-R M3 1600 UV curing tunnel (3 UV lamps) *1 x Cefla UV-R M2 1600 UV curing tunnel (2 UV lamps) *Cefla TR500 motorized conveyor line *Cefla automatic panel turner *Costa top sanding machine with 1 roller and 1 finishing pad *Automatic loading system with 2 x ABB robots

Condition: excellent (used), Year of construction: 2008, Laminated glass cutting line with low-e deletion Fedpfxsz Dv U Hj Akyopn Maximum laminated glass cutting length: 4600 mm Maximum laminated glass thickness: 8 + 4.56 PVB + 8 mm Tilting loading table with belts 100 BLC-J is included More technical information and layout can be found attached as Tech. data file Very good and clean condition Good working order As is Available immediately

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Fedpszvaibefx Akyopn Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR135-310-930 high-profile sheet metal. Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Material: Galvanized coil, Yield strength: 350 MPa Working speed: approximately 20 m/min Stacker length: 12 m Location of the line: Serbia

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement Fpjdpfex Eb Absx Akyon If you have any questions or comments, please let us know. Best regards, Leo Holland

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washer-dryer Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Fpedpfx Akjwplgbeyen Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport.

Condition: excellent (used), LAMINATING LINE for panels (particleboards, MDF, HDF) Minimum/maximum panel dimensions: mm 600-1550 (width) x mm 1854-3660 (length) Minimum/maximum panel thickness: PB/MDF mm 8 - 44 (standard mm 16-19-22) // HDF mm 2,5 - 8 Adjustable working speed: m/min 8 - 29 Minimum/maximum working cycle (Feeder and Stacker): 6 cycles/min - 10 cycles/min Fpedjzxrgwjpfx Akyjn 01) "KONTRA" Loading station (with stack chain conveyor, 2 Lifting platforms, Feeding station) 02) "KONTRA" Roller conveyor with length guide rail 03) "KONTRA" 1 Vacuum transporter + 1 Stack chain conveyor for protection boards 04) HYMMEN LAMINATING SYSTEM a. "HYMMEN" Mod. FRB (Cleaning Machine) b. "HYMMEN" Mod. GLK-V (Smoothing Calender to uniform the workpieces surface) c. "HYMMEN" Mod. TLA (Glue spreading machine) d. "HYMMEN" Mod. TRC (Conveyor) e. "HYMMEN" Mod. ADZ (Evaporation / Flashing-off Zone) f. "HYMMEN" Mod. KKL (Laminating Calender) g. "HYMMEN" Mod. DSS (Double-belt continous press) h. "HYMMEN" Mod. PWG (Pressing conveyoring rollers) i. "HYMMEN" Mod. FAA (Foil Unwinding Station) j. "HYMMEN" Mod. GLK (Final Calender) 05) "KONTRA" 1 Speed-up roller conveyor with length guide rails on both sides and pusher 06) "KONTRA" Unloading station 07) "KONTRA" 1 Protection board magazine

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, Panel Laminating Line for AKRYL, PET, PVC, HPL, CPL MASTER PUR-1400 Professional line for single-sided laminating of panels using PUR hot melt adhesive. Application: The machine is designed for laminating: MDF particleboard plywood PVC boards gypsum boards other wood-based materials Supported finishing materials: AKRYL PVC HPL PET Fpsdpfx Akjzkmqbeyen CPL decorative paper Technical specifications: Working width: 1400 mm Maximum panel size: 2800 × 1300 mm Panel thickness: 2–40 mm Operating speed: 5–17 m/min Output: 3–5 pieces/min Maximum output: approx. 1200 pieces/8 h Drive power: 21.49 Kw Heating power: 51.7 Kw Line dimensions: approx. 16 × 2.5 × 2 m Required floor space: min. 6 × 22 m Line equipment: feeder with roller conveyor brushing machine for cleaning panels IR oven for preheating the material 3-roller PUR adhesive applicator foil feeding station roller nip press receiving conveyor 208-liter PUR adhesive melting tank Advantages: high surface quality even adhesive application possibility of laminating high-gloss films low adhesive consumption stable operation in serial production

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Fpodpow Tyk Iefx Akysn

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Fpsdex A Tbwopfx Akyon

Year of construction: 2016, condition: good (used), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact yet highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting, and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Machine No.: 100 586 Working width: approx. 320 mm Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ UNWINDING Fpjdpfjz Ea N Rox Akysn The machine includes a professional unwind section for roll-fed production. Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Fpsdpoq Ulh Hefx Akyon Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Year of construction: 2018, operating hours: 100 h, condition: as good as new (ex-display), Klieverik laminating calender with few operating hours. Approx. 100h. The machine can be inspected on site. Condition as new. The machine has never been in serial production. Sale from place. Fedpfxshd N Das Akyepn

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL Fpsdpfx Aettlfkjkyon ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Year of construction: 2025, condition: new, 1) Conveyor belt with hopper: 1 unit Conveyor length: 8000 mm, working width: 600 mm, Hopper: length 3000 mm, width 2000 mm, height 1500 mm from the ground, EP 400/3 rubber belt with chevron pattern, 16 mm cleats, Fpsdsd N Hhuopfx Akyon Transfer speed regulated by an inverter, max. 0.2 m/s, conveyor belt with STOP safety switch. 2) Sorting conveyor: 1 unit. Conveyor length: 10000 mm, conveyor working width: 950 mm, height: 1400 mm to the top of the belt. Height: 1500 mm to the top of the sides. The conveyor sides are made of galvanized steel, the EP 400/3 rubber belt is smooth, and the conveyor sides are 100 mm. A hopper with a height of 600 mm on both sides and a width of 1000 mm. The conveyor speed is regulated by an inverter with a maximum speed of 0.3 m/s. 3) Work platform: 6 units, platform width: 1200 mm, platform length: 1200 mm, platform height: 500 mm, platform with safety barriers. 4) Loading grippers for recyclable materials: 8 units, Height: 1300 mm, width: 1300 mm, length: 1300 mm, With pivoting wheels and handles for attaching big bags. 5) Ballasted conveyor belt on a rotating axle and two running wheels: 1 unit, Conveyor length: 8000 mm, working width: 600 mm, Hopper: length 1200 mm, width 1000 mm, height 1000 mm above the ground, Ascent height: 3700 mm, EP 400/3 rubber belt with 60 mm T-cleats, 500 mm, fixed speed 0.4 m/s, conveyor belt with STOP safety switch. 6) Sorting line, equipped with an electrical distribution box, safety stop switches, and a 32A / 5 and 15m long connector of the power cable with rubber insulation. 7) The system has a 12-month warranty. 8) The system has a CE certificate. The pictures show the setup of such a sorting system. We produce versions with 4, 6, 8, 10, or even 12 workstations. Semi-mobile or stationary. Mounting on the floor or on a frame. Price - ex works Poznań (Poland). We have many references in the European Union. We speak Polish, German, English, and Russian.

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Fpedpfx Aoi E Trpokysn

Condition: good (used), functionality: fully functional, AMF Bakery Tromp puff pastry line direct from major factory. Has been producing 2 tonnes per hour of 90-100 layer puff pastry. Other machinery available from the same line including 2 x Syspal bowl tippers (2024), 2 x Diosna WV240 A Premium wendel mixers (stainless steel model), 2 x Siloba 75 tonne flour silos, 2 x Siloba flour stations. All being removed at the end of August '26. Fpodpfx Akezumifsyen

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Fpjdpfxsw Dd Hpo Akysn Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide belt sanding machine for professional use. The machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Fpsdpfxezxyfhj Akyjn Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 1,300 mm Cross belt: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Longitudinal sanding belt: 2,100 × 1,350 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross belt unit Longitudinal sanding unit Brush units Suitable for finish, fine and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transport possible for an extra charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Fpedowuzzrepfx Akyon Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: excellent (used), Year of construction: 2015, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK With low-e grinding Fedpfx Asxlq Nwskyspn Year of production: 2015 Maximum glass size: 3700 x 2600 mm "4 in 1" - with tilting, cutting, breaking and low-e grinding Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Glass thickness: 2 - 19 mm Glass cutting speed: up to 140 m/min In very good and clean condition Good working order, tested Good working order, tested As is See video Availability immediate

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NM - SPM, total length: 13,500 mm, total width: 1,700 mm, total height: 1,700 mm, Equipment: CE marking, Can packaging conveyor with scales and 19 workstations for professionals Equipment description: Up to 250 empty cans can be stored on the line workstations we can make how much you need. Each workstation has a KERN EMB 2000-2 scale Equipment width with workstations no larger than 1700mm Equipment height no larger than 1700mm • Equipment frames made of stainless steel AISI 304 • Belt-chain type and butterfly type • Conveyor for full boxes • Conveyor for empty cans • Two full can conveyors • Empty can feed conveyor • Adjustable speeds • Option to record the work results of each person and a total can counter at the end • At the workplace – Scales - Kerne • Custom-made table production at the line • Control box on one side • Line max. power consumption 3.5Kw • Control box to be agreed with the customer. Fpsdpfx Asw Afyhekyjn Easy clean Easy to maintain KERN EMB 2000-2 (2000g, d=0.01g) precision scales. Weighing surface 150mm. Simple and convenient 2-button operation Tare function facilitates formulation work Extremely flat design Ready to use: batteries included Single line (for one type of cans, of course, you can also put like Dingle but they have to be placed manually on the conveyor line, or you can order a separate conveyor as an option.) Adjustable feed speeds - Manufacturing time form first payment: 6 months - CE Certificate and instruction will be transferred when the line will be ready to deliver. - Warranty - 12 months after the customer receives the equipment at their factory

Condition: good (used), clear span: 2,700 mm, total length: 25,200 mm, load capacity: 2,700 kg, shelf height: 2,000 mm, Technical Specifications for Pallet Racking System: Rack System: Dexion Type: P 90 Set-Up Specifications: Number of Rack Rows: 1 unit Length per Rack Row: approx. 25,200 mm Number of Bays per Rack Row: 9 units at 2,700 mm each Number of Beam Levels plus Base Level: 2 units Volume Specifications: Pallet Spaces per Bay: 9 units Pallet Spaces per Rack Row: 81 units Total Pallet Spaces: 81 units Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n.d. Max. Weight per Pallet: 900 kg Scope of Delivery Includes: Fsdjw Il Sgepfx Akyjpn 10x Pallet Rack Uprights, used Material finish: sendzimir galvanized Type: M Profile dimensions: 90 x 75 x 1.80 mm Incl. horizontal & diagonal bracings, base plates Uprights are pre-assembled (bolted truss construction) 2,000 mm high 1,100 mm deep 36x Pallet Rack Beams, used Material finish: sendzimir galvanized Box profile: 100 x 50 mm Beam type: SLB 100|15 Bracket: 5 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 2,700 kg, with evenly distributed load 72x Safety Pins, used Material finish: sendzimir galvanized For securing the beams against accidental lifting 40x Bolt Anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x Shim Plates, used Design: fully galvanized For leveling rack uprights installed on uneven floors 1x Load Capacity Sign With specifications for bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General Information about the Item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be quoted separately depending on the place of delivery or scope of delivery.

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Fpsdpfx Akjf Ncadsyjn Track gauge: 3345 mm Height of travel: 650 mm 2x machine cutting torches with cutting table (2-part)