Used Feintool Gkp-F100 for sale (123)

Condition: ready for operation (used), Year of construction: 1986, machine/vehicle number: 97862034, functionality: limited functionality, pressing force: 100 t, stroke length: 50 mm, working width: 180 mm, installation height: 255 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Press force: 100 t Total force: 1,000 kN Ring tooth force: 40 - 310 kN Counterholder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Stroke rate (min.): 20 rpm Stroke rate (max.): 80 rpm Stroke: 50 mm Dodpsytcd Rsfx Aahsuw Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Max. feed height adjustment: +40 mm Max. distance between feed rollers: 20 mm Resolution, related to rollers: 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 EQUIPMENT Decoiler unit Two sets of tools Note: Further technical data for the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-off cycle. As a result, parts were not cleared out and the machine was stopped for safety reasons. However, the seller assumes this is merely a matter of adjustment. The seller recommends an overhaul of the control system in the long term.

Condition: used, Year of construction: 1996, machine/vehicle number: 7/4986, Capacity: 250 - 400 ton V – Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Daylight: 760 mm Ram surface: 800 x 800 mm Table surface: 810 x 1000 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg Standard configuration Automation roll-off try with leveller Dodpfx Aaouqdxieheuw

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW Dsdpfovwgl Njx Aaheuw

Condition: excellent (used), Heat exchanger, shell-and-tube heat exchanger, liquid cooler, Baltimore Aircoil International BAC F100, used machine Duedpfx Aaeyfnuljhsw Manufacturer: Baltimore Aircoil International Type: BAC F100 Year: 2015 Pressure: -10 / 10 bar Temperature: -20 / 82 °C Medium: Water / Glycol

Condition: used, Pump, KSB Sewabloc F100-251G H160M Industrial Centrifugal Pump, KSB Sewabloc F100-251G H160M, Used Machine Manufacturer: KSB Type: Sewabloc F100-251G H160M Technical Specifications: Flow Rate (Q): 71.78 m³/h Head (H): 15.33 meters Motor Power: 11 kW Speed: 1470 rpm Electrical Data: 400V; 21.7A Weight: 211 kg Overall Dimensions: Width: 1020 mm Dujdpjyyxpksfx Aahjw Depth: 480 mm Height: 530 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Final price, as differential tax applies according to §25a of the German VAT Act (UstG). Duodpfx Aaezb I Tgshsw You will receive a proper invoice! Internal article number: 26043 CNC milling machine Optimum F100 Year of manufacture: 2007 The machine comes from a public educational institution. Control system: Siemens Sinumerik 802 S base line RS232 interface Spindle mount: ISO40 Speed: 100 - 6000 rpm Travel distances: X 450 / Y 300 / Z 400 mm Table: 920 x 280 mm Table load: 300 kg + Operating manual + Programming manual + Electrical wiring diagram + Accessories (Various tool holders, including various MK4 holders (reduction from basic mount to MK4 available)) + 2-axis digital display Heidenhain + Operating manual + Coolant pump Speed: 90 - 1800 rpm Travel distances: X 400 / Y 200 / Z 400 mm Feed rate: 10 - 160 mm/min Rapid traverse: 900 mm/min Power: 1.6 kW / 380V L x W x H: 150 x 150 x 175 cm Weight: 1300 kg The machine is fully functional and can be inspected in operation by arrangement, in our heated warehouse with over 500 m² of space.

Condition: used, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for noise and contact pattern testing on bevel and hypoid gears. Technical Data • Diameter: 540 (400) mm • Hypoid: ±50 mm • Pinion spindle diameter: 90 mm • Dimensions (LxWxH): 1,800 x 1,800 x 1,600 mm • Machine weight: approx. 2,800 kg Dedpfoxpq Nlsx Aahsuw *Information and data are provided without obligation. Subject to prior sale. Special Features: The machine is intended for noise and contact pattern testing on bevel and hypoid gears of all gear types. By simulating operational conditions, applying various rotational speeds, and switching load states between drive and coast, the optimal installation distance for standstill can be determined. • Digital actual value display for 2 axes • Infinitely variable speed adjustment via frequency inverter • Electrically secured and removable safety guard • Accessories: Large number of workpiece holders • Condition: Very good

Condition: good (used), • Model – FMF 100 • Double-sided drilling machine • Min. diameter: 3 mm • Max. diameter: 300 mm • Speed: 110 – 4600 rpm Duodpfx Ajuqma Ajahow • Lower drill with automatic feed, upper drill guided manually

Condition: new, Elektror HRD 2 FU-130/7.5 high-pressure blower, serial number: 212/864490, with ATB VAF 100L/2C-11S motor, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Dusdpfx Aezkc Tloahsw

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Test Unit Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion test unit / salt spray chamber for salt spray, condensation, and combined tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to nameplate: S Watts: 2800 W K Watts: 2150 W B Watts: 500 W W Watts: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption for humidifier: approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling for bottom trough system: approx. 15 liters Test procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Dusdpfx Aezba N Teahjw Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used unit from industrial application. Optical condition as shown in the pictures. Inspection possible by appointment. Scope of delivery: (See picture) Shipping or freight forwarding possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by phone.

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m Dsdpeu Nfhdsfx Aaheuw WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: ready for operation (used), Schmalenberger ZHT07 32-08/2 centrifugal pump, serial number: 2014001631/10, with ATB CAF 100L/2C-11S+E2/0903 motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Djdpezh Sd Iofx Aahouw

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 20,736 h, load capacity: 10,000 kg, lifting height: 16,200 mm, fuel type: diesel, power: 185 kW (251.53 HP), empty load weight: 40,100 kg, drive type: Diesel, Empty Container Reachstacker Dedpfjzkcx Iox Aaheuw Chassis number: 0 Load center: 1220 Condition: Ready for operation and fully functional Technical condition: good Front tire type: pneumatic Rear tire type: pneumatic Description: Central lubrication system, reversing camera

Condition: used, Technical Data: Travel X/Y/Z: 700 / 250 / 430 mm Upper slide travel: 630 mm Spindle speeds: 45 - 1660 rpm Spindle taper: SK 40 Control: conventional Table feed: 24 - 402 mm/min Milling head swivels: 360° Table size: 1120 x 260 mm Dedpfx Aasyi E Udsheuw Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (W x D x H), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital readout - Machine lamp - Coolant device - Machine feet

Condition: new, Year of construction: 2026, MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM MIN WIDTH 50MM MAX THICKNESS 100MM MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM Duodpfx Aaey Hcaajhsw MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: new, Year of construction: 2026, MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM MIN WIDTH 50MM MAX THICKNESS 100MM MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM Duedpfxey Hb U Nj Aahew MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: like new (used), MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM MIN WIDTH 50MM MAX THICKNESS 100MM MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM Duedpfjy D Akmjx Aahow MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, workpiece weight (max.): 7,000 kg, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 2,000 mm, spindle speed (min.): 6,000 rpm, drill diameter: 32 mm, 24-POSITION TOOL CHANGER TABLE: 1000 X 1500 MM Dodpfx Aaezi Eqdjhjuw CNC MITSUBISHI 530

Condition: excellent (used), Machining Center MASTERWOOD TF 100 2.0 -used- Through-feed processing, Ball screw spindles on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in X-direction, Pick-up tool changer, Automatic central lubrication, Panel measuring sensor, New drill set, Dusdpfxjy Eylws Aahsw New grooving saw blade, Clamex option available, Door processing option available ----- Technical Data ----- Min. workpiece length X: unlimited, Min. workpiece length Y: 1,000 mm, Min. workpiece thickness: 60 mm, Number of vertical drilling spindles: 10 pcs, Number of horizontal double drilling spindles in X-direction: 2 pcs, Number of horizontal double drilling spindles in Y-direction: 1 pc, Saw blade diameter of saw unit: 120 mm, Number of tools in the changer: 6 pcs, Extraction port diameter: 150 mm, Compressed air connection: 6-8 bar, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg Quality Information: - Full basic cleaning - Electrical system checked - Pneumatic system checked - Set according to manufacturer's specifications - Immediately ready for operation

Condition: used, Geared motor, electric motor, three-phase motor, electric geared motor, offset geared motor Dodoink Tuepfx Aahsuw -Manufacturer: Bauer, gear motor type BF10-04/D07LA4 -Speed: 43.5 rpm -Power: 0.37kw -Construction: B14 -Hollow ell: Ø 25 x 125 mm -Protection class: IP 65 -Dimensions: 370/270/H220 mm -Weight: 24 kg

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump -Model Type: MF100 -Toothed shaft mounting: Ø 40 mm -Quantity: 2 available Dusdpfeb A Nfzox Aahsw Price: per piece -Dimensions: 430/240/200 mm -Weight: 50 kg/piece

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm Djdpoq Rxz Tefx Aahsuw -Weight: 57 kg

Condition: used, Mounting rails, sliding set, pipe clamps, pipe fastening, pipe clamp holder, WBD holder, clamping bracket, U-holder Dodeq Syuqspfx Aahouw -Manufacturer: Sikla, 15 pieces of clamping brackets for attaching carrier profile F -Type: SB F 100-16 .: 113 082 -Price/tax: complete -Dimension: 160/130/H30 mm -Weight: 0.7 kg/pc.

Condition: used, Electric motor, three-phase motor Duedpfxjh N Thzo Aahsw -Manufacturer: Bäuerle, electric motor type UOF100/94-2 -Power: 1.5/1.75 kW -Speed: 1430/2880 rpm -Shaft: Ø 22 x 60 mm -Construction: B3 -Dimensions: 345/270/H225 mm -Weight: 25 kg

Condition: good (used), Three-phase motor, electric motor Dujdpfsdfavhjx Aahew -Power: 1.5 kW -Speed: 940 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 360/250/H270 mm -Weight: 32 kg