Used Ewi-Therm Gra-N, 17Kw for sale (53,753)

Condition: new, Year of construction: 2026, Heating output / nominal thermal output: 17.8 kW For rooms up to approximately 300 - 400 m³ (according to DIN 4108) Filling chamber volume: 78 liters Dimensions of the filling opening: Ø 215 mm Flue outlet: rear (standard) Flue diameter: 180 mm Required chimney draft: min. 13 Pa Weight: 250 kg Efficiency: 79.02 % Energy efficiency class: A Ndedpedlmnnefx Ahkja The GRA-N room heaters are type-tested according to DIN EN 13240, 15a B-VG (Austria) and LRV (Switzerland). They comply with the 1st BImSchV (Federal Immission Control Ordinance), level 2.

Condition: new, Year of construction: 2026, heating capacity: 49 kW (66.62 HP), smoke pipe connection diameter: 180 mm, input voltage: 380 V, Size: 2/S Rated thermal output: 49 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber fully lined with fireclay bricks For rooms of: 1,450 m³ (according to DIN) Ndedodlhafjpfx Ahkea Fuel: logs, chipboard, wood chips, chip briquettes Fuel consumption: 15 - 25 kg/h Forced air flow rate: 4,000 m³/h Exhaust outlet: Ø 450 mm Flue gas connection: Ø 180 mm Weight: 1,025 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2026, Size: 6 Nedpfx Ahsdlhdbjksda Nominal heat output: 170 kW -- Compliant with German Federal Immission Control Ordinance (BImSchV) Stage 2 and CE standards -- Firebox completely lined with refractory bricks Suitable for rooms of: 4,800 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 40 - 50 kg/h Blower air capacity, free-blowing: 14,000 m³/h Exhaust outlet: Ø 700 mm Smoke pipe connection: Ø 220 mm Weight: 2,150 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2026, Model: Prestige SE Nominal heat output: 25 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Suitable for rooms of: 350 - 600 m³ (according to DIN) Fuel: Logs, wood chips, wood chip briquettes Fuel consumption: 8 - 10 kg/h Ndjdpfx Ahedlhcyekoa Forced air output: 1,450 m³/h Discharge opening: Ø 300 mm Flue gas connection Ø 150 mm with flue gas blower Weight: 400 kg PLC control cabinet: 220 Volts

Condition: new, Year of construction: 2026, Heating output / nominal thermal output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Flue outlet: rear (standard) Flue: Ø 180 mm Ndodpfx Ahehvibzskea Filling chamber volume: 80 liters Required chimney draft: min. 12 Pa Dimensions of the filling opening (L x W): 300 x 340 mm Weight: 375 kg Efficiency: 88.2 % Energy efficiency class: A+ The EWI-A 15G space heaters are type-tested according to DIN EN 13240, 15a B-VG (Austria) and LRV (Switzerland). They comply with the limit values of the 1st BImSchV (Federal Immission Control Ordinance).

Condition: new, Year of construction: 2026, Size: 0 Nominal heat output: 34 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Njdedlgvfepfx Ahksda For rooms of: 850 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, chip briquettes Fuel consumption: 10 - 12 kg/h Forced draft air volume: 2,200 m³/h Outlet opening: Ø 350 mm Flue gas connection Ø 150 mm with flue gas fan Weight: 690 kg PLC control cabinet: 380 Volts

Condition: new, Year of construction: 2026, Size: 3 Nominal heat output: 87 kW Ndodpfsdlhbpsx Ahksa -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Suitable for rooms of: 2,200 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 25 - 30 kg/h Blower air flow rate, free-blowing: 6,000 m³/h Outlet opening: Ø 500 mm Flue connection: Ø 200 mm Weight: 1,250 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2026, Size: 4 Nominal heat output: 116 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Ndodpedlhcdefx Ahkea Combustion chamber fully lined with refractory bricks Suitable for rooms of: 2,900 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 30 - 35 kg/h Forced air supply, free-blowing: 7,500 m³/h Exhaust outlet: Ø 600 mm Flue gas connection: Ø 220 mm Weight: 1,550 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2026, Size: 5 Nominal heat output: 145 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks For rooms of: 3,800 m³ (according to DIN) Fuel: logs, chipboard, wood chips, chip briquettes Nodpfx Aodlhcrehkjda Fuel consumption: 35 - 40 kg/h Forced air output: 9,400 m³/h Exhaust outlet: Ø 700 mm Flue gas connection: Ø 220 mm Weight: 1,950 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2026, Heating output / Nominal thermal output: 16.5 kW For rooms up to approx. 300 to 400 m³ (according to DIN 4108) Flue outlet: rear (standard) Flue: Ø 180 mm Filling chamber volume: 80 liters Required chimney draft: min. 12 Pa Dimensions of the filling opening (L x W): 300 x 340 mm Njdpfodlmn Hsx Ahkoda Weight: 370 kg Efficiency: 85.88% Energy efficiency class: A+ The EWI-A 15 room heaters are type-tested according to DIN EN 13240, 15a B-VG (Austria) and LRV (Switzerland). They comply with the 1st BImSchV (Federal Immission Control Ordinance), level 2.

Condition: new, Year of construction: 2026, Size: 2 Nominal thermal output: 58 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Firebox completely lined with refractory bricks Suitable for rooms of: 1,450 m³ (according to DIN) Nodpfx Ajdlha Dehkjda Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 15 - 25 kg/h Forced draft air flow rate: 4,000 m³/h Outlet opening: Ø 450 mm Flue gas outlet connection: Ø 180 mm Weight: 1,025 kg PLC control cabinet: 380 volts

Condition: new, Year of construction: 2026, Size: 1 Nominal heat output: 45 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber fully lined with refractory bricks Suitable for rooms of: 1,100 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, chip briquettes Fuel consumption: 12 - 15 kg/h Forced air output: 3,250 m³/h Exhaust outlet: Ø 400 mm Flue gas connection Ø 150 mm with flue gas fan Weight: 740 kg PLC control cabinet: 380 volts Ndjdpfx Ahedlgqpekja

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1289892, Oscillating stainless steel granulator with enclosed product feed and manual dosing unit. The mill is mounted on a stainless steel frame with feet. Various sizes of sieve inserts are included with the system. The installation is fully documented with all details, including parts lists, operating manual, drawings, etc. Electrical connection: 380 V, 50 Hz, 2.5 Amp. The MG-800 has been qualified in accordance with GMP guidelines and is fully documented. Packaging, loading, and load securing on a truck are included in the sale price. Nedevt Sywspfx Ahkoda

Condition: ready for operation (used), * Brand: Integra * Model: screening machine with conveyors * Screen surface: 4000 x 1100 mm – 2 Decks * Driving: 2 pieces of vibration motors of 4 kW each Nodpfxeywmyxe Ahkoda * Incl.: springs & construction. * Conveyors: 2 pieces * 1x: A-A length= 8000 mm, Beltwidth: 800 mm * 1x: A-A length= 3500 mm, Beltwidth: 650 mm * Driving: 3 kW Gearbox

Condition: used, Year of construction: 2024, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pivoting range: 45 °, actuation type: manual, rotational speed (min.): 2,800 rpm, table width: 500 mm, table length: 700 mm, total length: 1,200 mm, total width: 900 mm, total height: 1,600 mm, overall weight: 95 kg, Equipment: documentation/manual, • The mortise milling cutter, type QNF, is used for horizontal and vertical mortising in wood, aluminum, and PVC. • The drive unit with the milling head runs in a guide arm, which is supported by four ball bearings. • Machine stand included. • Robust gray cast iron construction. Nodpfezvfw Rjx Ahkjda • Hydraulic feed brake. • Pneumatic horizontal material clamping, on both sides of the milling area. • Lower milling cutter guard can be connected to an extraction system. • Carbide-tipped mortise milling cutter, 250 x 60 x 40 mm, Z=4+4.

Condition: used, The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Ndedpfx Aoztvy Rehkea Technical data: - Motor: 1.5 kW - Connection: 380 V

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm Nodpfxjxabzts Ahksda cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, HM circular saw blade for aluminum and plastics, 420 x 3.2 x 40 mm, 108 teeth, negative tooth angle Hydraulic feed brake Pneumatic material clamping system, on both sides from above Pneumatic saw blade spray system Pneumatic maintenance unit, consisting of a water separator, pressure reducing valve with pressure gauge, and oiler Crosscut fence for cutting angled pieces Njdezu Azdopfx Ahksda Machine stand

Condition: used, Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: - Motor: 2 kW Nsdpfx Ajzrywqshksda - Connection: 380 V

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 5 kW (6.80 HP), 5 kW, 7.5 hp Cutting height 200 mm Tiltable up to 60° to the left, up to 30 degrees to the right via hand crank from the front Cutting height when tilted at 45°: 140 mm Cutting width: 420 mm, cutting width when swiveled at 45°: 290 mm Swiveling up to 60 degrees to the left, to the right up to 45 degrees Incl. saw blade for wood 6,000 mm heavy-duty outfeed roller conveyor, mounting side on the left, stop slide with handwheel adjustable in length from the machine, pneumatically lockable, length digitally readable, digital display in 230V version 4,000 mm heavy-duty infeed roller conveyor, mounting side on the right Machine can be tilted to both sides from the front via hand crank and worm gear On request, various options are available, e.g. larger cutting height (215 mm and 240 mm), pneumatic material clamping and laser cutting indicator Ndedjdxw U Iopfx Ahkoa With appropriate modifications, also suitable for aluminum processing The roller conveyors can be supplied in longer or shorter versions upon request If manual adjustment of the stop is desired, the price is reduced by 1,900 euros net.

Condition: excellent (used), functionality: fully functional, Saw in very good condition. Includes towing brake. Nsdpfxoy Tt Hdo Ahkoda

Condition: excellent (used), functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 295 mm, saw blade diameter: 520 mm, saw blade bore: 50 mm, rotational speed (max.): 2,800 rpm, overall weight: 300 kg, cutting depth: 200 mm, extraction nozzle diameter: 100 mm, Further technical data Cutting width: 90° 420 mm | swivelled at 45° 295 mm Cutting depth: tilted at 45/90 degrees 140 mm | 200 mm Special equipment Nodpfxextpuus Ahkeda 1019 Machine tiltable on both sides from the front via hand crank 1002 Hydraulic feed brake 1049 HM circular saw blade for wood 520x4.0x50 mm / 60 teeth negative

Condition: used, Year of construction: 1998, machine/vehicle number: 149280, Hardening furnace Item No. 26164 Technical data: - Nominal temperature / continuous temperature, infinitely adjustable up to 1200 °C - Three-sided heating (bottom + sides) - Temperature control via NABERTHERM Controller C 30 - T. max. 120 min - Drive 400 V / 12 kW - Internal dimensions approx. W 350 x H 250 x D 770 mm - Usable volume 41 L - Space required approx. W 950 x H 1370 x D 1600 mm Nedpfezg E I Dox Ahkoda - Weight approx. 400 kg

Condition: used, Year of construction: 2008, functionality: unexamined, power: 25 kW (33.99 HP), type of input current: three-phase, temperature: 200 °C, total length: 1,630 mm, total width: 1,700 mm, total height: 2,950 mm, overall weight: 1,650 kg, number of chambers: 1, control type: PLC-controlled, fuel type: electric, We offer a used Nabertherm N 150/03 CDB, manufactured in 2008. Nodjzp Hfpepfx Ahkeda This is a furnace for the catalytic removal of adhesive residue from parts coated using the metal or ceramic powder injection method. The binder contained in the load undergoes chemical decomposition using nitric acid and is removed in the form of a gas. Model: N 150/03 CDB Serial number: 199905 Year of manufacture: 2008 Maximum temperature: 200 °C Rated voltage: 400 V 3/N/PE ~ Frequency: 50/60 Hz Current: 50/23/26 A Power: 22.4 kW TECHNICAL DATA: ✅ Capacity: 150 l ✅ Maximum temperature: 200°C ✅ Chamber dimensions: 450x450x750 mm ✅ Overall dimensions: 1625x1930x2850 mm ✅ Total power: 25 kW ✅ Catalyst, programmable, historical curve tracking, nitric acid pump EQUIPMENT: ✅ Monitoring of nitric acid flow via a probe ✅ API control ✅ Siemens S7-300 If you have any questions or require additional information, please send a message or contact us by phone.

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Nedpfx Ahei Dfidokeda Location: Available from stock in 54634 Bitburg - immediately available -