Workshop heaters / room heaters

Ewi-Therm EWI-A 15

Condition: new, Year of construction: 2026, Heating capacity / nominal heat output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling volume: 80 ltr Required chimney draft min. 12 Pa Mass of the filling opening (L x W) 300 x 340 mm Weight: 375 kg Efficiency 88,2 Energy efficiency class: A+ EWI-A 15G space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the limit values of the 1st BImSchV. (Federal Immission Control Ordinance) Lasdohvibzepfx Ancsa

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Lajdpfx Aera Dddsncea Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Construction features: - Large loading opening for cardboard - Possibility of automatic feeding (e.g., via conveyor) - Manual wire tying (4 wires) - Pallet lock and hydraulic doors for bale removal Advantages of this press: - Large bales – fewer transports - High pressing force - Designed for continuous operation Available production years: 2016–2020

Year of construction: 2011, condition: used, functionality: fully functional, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm Laodpsi Ezx Djfx Ancsa 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Condition: used, Year of construction: 2000, Used feeder Year of manufacture: 2000 Suitable for Kündig Uniq edge sanding machine Technical specifications: Max. reach: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Spring travel of rollers: 25 mm Speed settings: 8 Ledpfx Anoumpp Escoaa (2/4/5.5/6.5/11/13/16.5/33 m/min) Motor power: 0.75 kW Connection: 400V/50 Hz Weight: 32.5 kg The console shown in the picture is not included in the scope of delivery! Location: Flörsheim Availability: Immediately

Condition: good (used), x-way 410 mm y-way 310 mm z-way 400 mm Ljdpsi Elydjfx Ancjaa taper of the main spindle SK 40 table clamping surface 700 x 280 mm speed 45 - 2000 rpm quill stroke 63 mm total power requirement 2,2 kW Machine weight approx. 1300 kg space requirement approx. 2,1 x 2,1 x 1,7 m Voltage 400 V 3-axis digital display Heidenhain Fixed angle table Coolant device Vertical milling head swiveling

Condition: excellent (used), Easycount CD5 tablet counter Ljdoiy Nngjpfx Ancjaa Serial: 51002040 Stainless, easycount will make a precise inventory of all hard and soft gelatin capsules and most sizes and shapes of tablets, fill all kinds of containers exactly and automatically, check number of full containers at any time and identify how many pieces have been counted in the last and incomplete containers, 1Ph

Condition: used, approx. 15t available Lasdpfodc A Sijx Ancoa

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity Lasdjv Ngq Aspfx Ancsa already disassembled complete with boiler, stocker unit, and discharge system

Condition: new, ZEATZ NC Rotary Tables PHV Series – Available for Immediate Delivery The ZEATZ NC rotary tables in the PHV series represent top precision, stability, and flexibility for modern machining applications. Ideal for positioning, rotary, and simultaneous machining processes across a wide range of applications. Your key benefits at a glance: ✔ Seamless integration into existing machines (HEIDENHAIN / SIEMENS) ✔ Service & technical support provided directly by JMT ✔ Custom configurations and tailored solutions ✔ High load capacity for heavy workpieces Why ZEATZ: ZEATZ stands for innovative NC rotary table solutions offering highest precision and reliability. Thanks to their robust construction, backlash-free drive systems, and state-of-the-art control technology, these rotary tables are ideally suited for demanding machining tasks. Technical specifications: Working position: Vertical / Horizontal Applications: Positioning Infinitely variable rotation Interpolated machining Sizes: Table diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (square clamping surfaces also available upon request) Max. workpiece weight: Horizontal: up to 20,000 kg Vertical: up to 4,000 kg Positioning accuracy: ± 3 arcseconds Integration: Compatible with HEIDENHAIN and SIEMENS controls Your advantages as a JMT customer: ✔ Official distribution partner for ZEATZ in Germany Lsdpfx Ajm Tvz Dsnceaa ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Assistance with integration and commissioning ✔ Reference projects available throughout Germany Contact us – we will be happy to advise you and prepare a tailored quotation for your needs.

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Lsdof Dwa Ujpfx Ancsaa