Used Esterer Lsh 65 for sale (7,696)

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. Nlsdpfxszgr Iqe Ag Ioh HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Nsdpfxoyhduye Ag Islh Location: Austria, near Graz

Condition: excellent (used), Spare parts for Esterer log carriages LSH 65, some in new condition, new and used. Flywheels, stanchions, hydraulic cylinders, chain drives, feed gears, guides, solenoid valves, overhanging parts. Saw frame, top and bottom, saw carriage with insertion brackets. Pulleys. Spare parts also available for Esterer log carriages SS 71. Nlsdpfx Aji T Egpjg Ish

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm Njdpfx Agew Dn S Ae Iolh 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Year of construction: 2017, condition: used, processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm Nodjnwm R Nepfx Ag Ijlh - 100 m3 / shift production - total input 230 kW

Condition: used, Year of construction: 2017, zpracování slabé hmoty - délka výřezů od 1300 - 4500 mm - průměr kmene od 130 - 350 mm - 100 m3 / směnná výroba - celkový příkon 230 kW. ​Vyhledat podrobnosti Nlsdpfxonqzkpj Ag Ijh 137 / 5 000 Výsledky překladu Výsledek překladu processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW.

Condition: good (used), Hydraulic unit for Esterer LSH saw gate, manufactured in 2006 Type: RP 63 WÜ Feed mechanism for LSH also available Njdpfxsg R Sm De Ag Ijlh Fully functional – in good condition – immediately available Location: Austria, near Ried im Innkreis Please also check out my other listings. I look forward to your inquiry.

Condition: excellent (used), Cross-country trac/multi-saw receiver Rollers width 1160mm Number of drawing rollers 14 Nodpfx Ajtrq S Hjg Iolh Distance between rollers 550mm Drop chains with takers 4pcs Longest element 820cm Use behind a sawmill or a multi-saw

Condition: good (used), functionality: fully functional, Esterer spreading jaw AVER. Equipped with electrically driven spreading rollers. Also adjustable manually. Nodpfx Agsz D Exue Iolh Electrical adjustment of the spreading jaws, also asymmetrical. Pressure rollers can be hydraulically extended and retracted. Heavy-duty spreading jaw blades and spring flaps.

Condition: used, Esterer Linck debarking machine, model ELC ER 72 N 12 SR. Suitable for trunk diameters of 10 to 75 cm. Feed rate up to 70 m/min. Njdsz Dvdzjpfx Ag Islh 12 infeed and outfeed rollers. Minimum wood length: 1.80 m. Debarking rotor with 6 knives. Hydraulically pre-tensioned. Main motor: 55 kW. Feed motor: 7.5 kW with 2 speeds. Also ideal as a replacement machine, as many new parts have been installed in recent years.

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor Nedj Afg Tcepfx Ag Islh

Year of construction: 1995, condition: ready for operation (used), Manual edger DK 90 consisting of: 2 x under-table crosscut saws, line laser, edger, roller conveyor with slat separator, and tilting table. Naturally equipped with all associated control cabinets and hydraulic power unit. Additionally included are numerous templates and a fixed slat head. Inspection is possible upon prior and mandatory appointment. The price is exclusive of 20% VAT, ex works, excluding dismantling, loading, contract preparation, and customs clearance costs. Nsdoq U R Etspfx Ag Ijlh

Condition: excellent (used), functionality: fully functional, Complete sawing frame for EWD Esterer gate, type HDN 600 or HDS 600 with width adjustment. Includes Jansen double-yoke tensioner. Nledpfezn Uv Hox Ag Ioh Lightly used. Ideal for keeping spare parts in stock.

Condition: used, functionality: fully functional, Well-maintained, inclined cross conveyor from Esterer, originating from a small sawmill. Drive via geared motor. 6 chain strands. Spacing: 2300 mm - 1500 mm - 1200 mm - 1000 mm - 1200 mm. Nlodpozw Epcofx Ag Ijh Conveyor length approx. 3000 mm. Chain pitch 80 mm.

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades Nedpsw I Sg Defx Ag Islh • Saw shaft fitted with new bearings • 55 kW saw motor • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: excellent (used), functionality: fully functional, Low-profile roller conveyor system. Length 12.20 m. Roller length 1.40 m. Nsdjzumy Rspfx Ag Islh Equipped with support rollers and a lifting transfer conveyor with 4 chain strands. Incline conveyor belt for side products, to increase the drop height. Left-hand spiral roller conveyor with a counter roller.

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Nsdsywh Hmopfx Ag Islh

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 C-axis table rotation 360° B-axis table swivel -50° / +110° Spindle nose - table distance 150mm Table clamping surface Ø650 Table load max. 300kg Table slots 5 x 18H7 x 100 mm Centering bore Ø50 H7 x 30 mm Workpiece size max. Ø 520 x 330 mm Machine accuracy VDI I DGQ 3441* Positioning accuracy +/-0.006mm* Axis resolution 0.001mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive AC motor, direct drive Drive power (100% / 25% ED) 10.0/17.0 KW Speed range, stepless 20-12000 RPM Spindle taper SK 40 DIN 69871 Torque at (100% / ED) 63.7/108.6 Nm Axis drives: Axes X, Y, Z AC motors Axes B, C AC motors Travel speeds: Rapid traverse in axes X, Y, Z 36m/min Speed max. B-axis 25 RPM Speed max. C-axis 25 RPM Acceleration X, Y, Z 6.5m/s² Coolant system: External tool cooling via external nozzles Coolant tank 280l Operating pressure, external 0.9bar Coolant system, internal tool cooling DIN69871 Form A Operating pressure, internal coolant supply 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control Heidenhain iTNC 530, full simultaneous 5-axis configuration -Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Scraper conveyor with discharge height 800 mm • Spindle cooling - radiators - plate cooling for spindle motor - Full protective enclosure with canopy Tool magazine VZG 65 5A from Indunorm: Number of tools 100 with a tool length of up to 320mm / Convertible to 125 tools, then only 200mm tool length is possible. Tool diameter max. 80mm Tool diameter max. 130mm (with free adjacent spaces) Tool change with double gripper -Linear path measuring system in axes X / Y / Z (glass scale) -Direct encoder in axes B / C -Temperature compensation - IR measuring probe - 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double cartridge filter • Switchable filter cartridges • Filtration rating 10my Belt filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Nodpsz Diq Uefx Ag Iolh Handling data: 100 kg (35 kg) Handling weight max. Pallet capacity: 6 pallet spaces up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance 180mm - Clamping force 4x12500N - Repeat accuracy 0.005mm - Axial load max. 4000kg • Zero point clamping plate 320 x 320 -Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, power chucks, and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary through-feed integrated in the table • pneumatic lines routed to the outside • Pneumatic maintenance unit • Control via M commands logical inputs/outputs prepared incl. 12 pallets 320x320 !!without tool holders and without tools!! WITHOUT clamping devices such as vises, etc. !! Machine ex works, without delivery and assembly, all information without guarantee, price plus legal value-added tax.

Condition: good (used), Year of construction: 2014, functionality: fully functional, DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 – 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Swiveling range / Rotational range T-slots: 600 B: +/- 120 C: 360 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Number of tool positions: 30 Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free neighboring position: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Nledpjz Ix Uqjfx Ag Ieh Chip removal time: 8.0 sec Feeds: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed rate: 1 – 40,000 mm/min Total power consumption: 24 kVA Machine weight: approx. 11.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Documentation Coolant system Electrical handwheel Laser head: 100 watts Laser operating hours: 6177 h / 2802 h Machine operating hours: 18703 h / 4738 h

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Nlsdpfjyg Hcdsx Ag Ijh

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: white, driver cabin: other, gearing type: other, Year of construction: 2000, Vehicle location: Bovenden, storage box, 2 compartments Body: Esterer tank body for heating oil & diesel with 2 compartments approx. 13,350L (5,950L/7,400L) Dismantled from DAIMLER-BENZ Actros 1831 4x2 with 3,900mm wheelbase! Next leak and functional test in 03/2027! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! - . Nlsdpfxjwqn Rle Ag Ioh

Condition: used, Year of construction: 2012, functionality: fully functional, Spinner TC 600 65 SMCY with C-Y axis and sub-spindle Nedpfx Agoz Iqf Uj Islh Technical data: max. swing diameter ~600 mm max. turning diameter ~400 mm max. turning length ~650 mm travel X/Y/Z: X 275 / Z 700 max. rapid traverse X/Z 15/24 max. speed 4500 rpm spindle power 22 kW torque 250 Nm max. speed sub-spindle: 6000 rpm chuck 165 mm spindle power sub-spindle: 10 kW tailstock size 8 taper connection MK4 Number of tools: 16 tool holder: VDI 30 max. speed rotating tools: 5000 rpm power (60%): 6 kW torque (60%) ~30 Nm Weight: 5,000 kg Dimensions: 2.5 m × 1.6 m × 2 m Accessories: chip conveyor tool holders extraction system

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Mafell Elektronik handheld router LO 65 Ec with Arunda 80N Maxi and LO-FA router adapter used, from business liquidation Woodworking machine with fine adjustment for routing depth for delicate work, as well as template applications in solid wood Technical data according to the manufacturer: Mafell handheld router Type: LO 65 Ec Year of manufacture: 2021 Routing depth: 0 - 65 mm Universal motor: 230 V Tool holder (mm): 1/2" / 6 - 12 mm Design: MidiMAX in T-MAX Weight: 6.9 kg Idle speed: 10000 - 22000 1/min Power: 2600 W additional accessories, as shown in the picture: Mafell Arunda 80 N router template, year of manufacture 2022 Mafell LO-FA router adapter Copy ring ø 27mm Dust extraction hood We recommend an inspection to avoid misunderstandings. Information provided without warranty Information, details, and technical data from the manufacturer Nodpfx Agsz H Up Io Iolh To prevent any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am and 12:00 pm and 1:00 pm to 4:30 pm. During this time, inspections and collections are possible and desired, AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Nedjzht Hwjpfx Ag Iolh Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc.

Condition: used, Year of construction: 1952, Double-edge trimmer / circular saw for edge trimming Manufacturer: Esterer Type: DK600 Year of manufacture: 1952 Maximum feed width: 70 cm Nedpfx Agezl N Tns Islh 0-line on the left Adjustable saw blade on the right Immediately available Location: Austria, near Ried im Innkreis