Used Erwin Stelzer Warburg Sm/62E.d2 for sale (2,454)

Condition: used, For sale is a propeller mixer from Erwin Stelzer Warburg. It is model SM/62E.D2. Mixer specifications: RPM: 985 V: 230 / 400 kW: 0.75 Shaft length: 400 mm Propeller diameter: 220 mm Pgedpoga I Tyjfx Adlou Connection: DN200 For further information, please refer to the nameplate.

Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is model 8M 63G.D2. Data for the agitator: RPM: 225 V: 220 / 380 Psdjga I T Ispfx Adljgu kW: 1.5 Shaft length: 500mm Impeller diameter: 240mm Connection: DN200 Further information can be found on the nameplate.

Condition: used, For sale are eight propeller mixers from Erwin Stelzer Warburg. These are model DRH 64. The condition ranges from good to heavily used. RPM: 1450 V: 220/380 Pgedpoga Dv Hsfx Adleu kW: 7.5 Shaft length: 740mm Impeller diameter: 320mm Connection: DN250

Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is the DRX3204D model. Agitator data: RPM: 1435 V: 220 / 380 kW: 2.2 Shaft length: 500mm Impeller diameter: 280mm Connection: DN250 Further information can be found on the nameplate. Pgsdoga I Sxepfx Adlju

Condition: ready for operation (used), For sale is the propeller agitator DRK8P6/12D from Erwin Stelzer Warburg. Product data: Psdpfx Asfr Ifdodlsgu 18/4 kW 380V 34.2/10.8 A 980/480 RPM Shaft length 780mm Impeller diameter 420mm 0.92/0.68 cos IP 44 50 Hz Operating mode S1 Insulation class E Nameplate (photo)

Condition: good (used), For sale are three DRK66D propeller mixers from Erwin Stelzer Warburg, equipped with an emergency stop switch. Product specifications: 8.5 kW 380/660 V 20.5/11.9 A 960 rpm Pgsdpfxsfr Iguo Adlou Propeller diameter 400 mm Flange diameter 400 mm 0.74 cos φ Operating mode S1 Insulation class E IP44 50 Hz

Condition: good (used), For sale are four propeller mixers, model DRK64D, manufactured by Erwin Stelzer Warburg. One propeller blade is slightly bent. Product data: 11 kW 380/660 V 25.0/14.5 A 1450 rpm Podjfr Iihspfx Adljgu Shaft length 600 mm Blade diameter 340 mm DN250 0.85 cos IP44 50 Hz

Condition: ready for operation (used), 11x DRK 26 H mixers from Erwin Stelzer Warburg, equipped with emergency stop switches. 8x with propeller, 3x without propeller. Product specifications: 1 kW 220/380 V 5.9/3.4 amps 920 rpm 2.7 hp 0.64 cos φ Insulation class E Shaft length 400 mm Shaft diameter 30 mm Overall length 800 mm Pjdpefr Ianefx Adljgu Impeller diameter 240 mm Connection: DN125

Condition: good (used), For sale is a shaft mixer from Stelzer Rührwerke International GmbH. It is the SM460-DF model. Product data: Pjdpfjfr Icusx Adljgu 1455 RPM 400V 18.5 kW Shaft length 720mm Impeller diameter 280mm Further data can be found on the nameplate (photo).

Year of construction: 2025, operating hours: 100 h, condition: good (used), functionality: fully functional, Good screening drums – suitable for Doppstadt SM 518 1 × Screening drum with 40 mm square openings 1 × Screening drum with 60 mm round openings Pods Afh Sgopfx Adlegu Drum dimensions per drum: Ø 1,800 mm × 4,700 mm length Price: The stated price applies to both screening drums together. The drums can also be purchased individually. The individual price is €6,000 net per drum.

Condition: used, Universal external and internal cylindrical grinding machine ERWIN JUNKER, Type BUAJ 29 NC External cylindrical grinding machine, internal cylindrical grinding machine Manufacturer's No. 3126, Year of manufacture 2001 Center distance max. 800 mm Workpiece grinding length max. 800 mm Center height 150 mm Swivel diameter max. 295 mm Workpiece weight max. 120 kg Workpiece spindle speed 20 - 750 rpm Spindle stock, internal taper MK 5 Spindle stock, short taper flange DIN 55027, Size 5, Ø 82 mm Spindle stock, spindle bore 36 mm Spindle stock adjustment 355 mm Tailstock, internal taper MK 4 Grinding wheel diameter max. 400 mm Pgodpfx Ads Aard Nelou Grinding wheel width max. 63 mm Grinding wheel bore Ø 127 mm Grinding wheel peripheral speed 45 m/sec Automatic spindle stock feed 0.001 Manual feed 0.001 mm Hydraulic table movement 0-7.5 m/min Motor power, grinding spindle 7.5 kW Motor power, workpiece spindle stock 1.1 kW Motor power, internal grinding unit 1.75 kW Mains connection 400 Volt, 50 Hz - FANUC control, Type Power Mate-Model D - Grinding spindle stock swivels from +45° to -15° - Workpiece spindle stock swivels 90° - Table can be tilted for taper grinding up to 8°30" - Support/pinole for the workpiece spindle stock with internal taper MK 4 - Internal grinding unit for swiveling in - Internal grinding spindle with collet chuck, Ø 6 mm - Coolant system located beside the machine - Machine equipped with one grinding wheel, Ø 400 x 50 mm - 1 three-jaw chuck TOS, Ø 160 mm - 1 mechanical round magnetic chuck, Ø 200 mm - Collet chuck system with various collets - Various attachments for the internal grinding unit - 1 diamond grinding wheel dresser - Other accessories as shown in the pictures - Operating manual, hydraulic diagram, electrical diagram Space requirement for cylindrical grinding machine with band filter L x W x H 3200 x 2500 x 1900 mm Weight 5000 kg In very good condition

Condition: used, Year of construction: 1994, machine/vehicle number: 9400207, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 13,000 mm, workpiece width (max.): 280 mm, workpiece height (max.): 160 mm, actuation type: electric, total length: 21,000 mm, Equipment: CE marking, documentation/manual, The AUER Unicapp CNC woodworking line is fully functional for standard woodworking tasks; it can process KVH and BSH timber in full lengths (13m). A roof truss or other wooden structure drawn in a CAD program for carpenters, such as SEMA, can be directly sent to the CNC machine. Demonstration and testing are possible. The maximum working height and width of the processed timber are 26/24 cm. The machine has a crosscut saw, mortiser, drill, dovetail milling cutter, rabbeting and tenoning milling cutter, and an automatic feeder. More information is available by phone. The machine software is still supported. The total length of the machine is 21m and it requires a main circuit breaker of 3x50A. Technical data: AUER UNIKAPP – woodworking processing line (Abbundanlage / Zimmerei-Bearbeitungszentrum) Manufacturer: Ervin Auer Maschinenbau, Abtenau (Austria) Successor company: AUERTECH GmbH & Co KG (Lindenthal 63, 5441 Abtenau, Austria) Type: UNIKAPP Category: Woodworking processing center (woodworking line) Power: 30 kW Voltage: 380 V Serial number: 9400207 Year of manufacture: 1994 Max. workpiece width: 280 mm Max. workpiece thickness: 160 mm Total number of units: 5 Saw units: 1 Drilling units: 1 Milling units: 2 Mortising units: 1 Workpiece feeding: using clamping jaws (sliding carriage with pneumatic/hydraulic clamping) Compliance with standards: CE marking Total electrical power consumption: 30 kW This is a woodworking line for processing beams/roof trusses – it combines a saw for crosscuts and miters, milling cutters for fitting, mortising joints, a drill, and a mortising unit. The workpiece is moved using clamping jaws along the entire length of the beam with pneumatic clamping. If you have any questions or need further information, please feel free to send us a message or contact us by phone. A roof truss or other wooden structure drawn in a CAD program for carpenters, such as SEMA, can be directly sent to the CNC machine. The machine has guaranteed service support, and an upgrade of the ABB control program corresponds to the latest version. Demonstration and testing are possible. It provides a similar performance to a Hundegger K1. Pgodpfezz Tv Ejx Adlsu If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 230 V, total width: 1,100 mm, total length: 8,000 mm, total height: 2,000 mm, overall weight: 1,300 kg, For Sale: Senio Machinery High-Speed, Full 12x10ML Bottling Line – 2018 Manufacturer: Senio Machinery, China (no longer in business) Model: SM12-12-8 Year of Purchase: 2018 Condition: Fully operational Application: 10ML e-liquid production (can be modified). - Equipment Overview A high-output, 10ML, fully semi-automatic filling, plugging, capping, and labeling line. Used for 10ML PET bottles and for filling e-liquid (non-aromatic). Equipped with 12 piston pumps. Designed for 120 bottles per minute (BPM) at optimal speed and viscosity. Suitable for e-liquid, liquid filling, and other compatible production applications. • Price in 2017: $103,000 (€92,000) - Condition & Availability The equipment is available for inspection by appointment. Further technical information, photographs, videos, and details can be provided upon request. Location: Aalborg, Denmark Podpfoz S Aatjx Adlogu

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 380 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 300 mm, total height: 1,750 mm, total length: 2,420 mm, total width: 2,200 mm, overall weight: 2,400 kg, table height: 750 mm, Equipment: CE marking, documentation/manual, For sale: MEBER SM300 automatic band saw. Minimum cut length in semi-automatic mode: 20 mm. Podpfx Adsz Ikvaeljgu Minimum cut length in automatic mode: 90 mm. The machine comes with all original documentation (manuals, certificate of conformity, CE marking), as well as a sworn expert report prepared by a certified expert. Collection and transportation are the responsibility of the buyer, but I am willing to assist with loading the machine.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Pgodpoz Eht Djfx Adlou Wide range of documented dough weights Detailed technical specifications

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 626963, Heidelberg - SM 74-2 H Number of copies produced 74.077.397 Year of Production -2003 Max-Sheet Size 530 × 740 mm (20.87 × 29.13 in) -- 2/0—1/1 Max.printing Speed 13000 /h CP 2000 Center, AutoPlate system, Dampening rollers Alcolor Automatic Wash rollers and Cylinder Ink Fountain-Ink zone motor Electric equipment- 50Hz 380 V Pgedpfx Adjz Nz S Aoleu Pull Lay control-Electronic Powder spray-Alphathronic 200 Circulation and cooling ---Dampening Baldwin Device Available immediately

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 500 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 500 mm, spindle motor power: 15,000 W, rotational speed (max.): 4,000 rpm, total height: 1,800 mm, total length: 4,000 mm, total width: 1,900 mm, quill travel distance: 210 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, overall weight: 5,000 kg, spindle nose: 6, Equipment: documentation/manual, rotational speed infinitely variable, CNC Fanuc 18i - T CAPABILITIES: Max. workable diameter from bar stock: 54 mm Max. workable diameter from chuck: 250 mm Max. workable length: 500 mm Max. rotating diameter: 520 mm MAIN SPINDLE: Rotation range: 40 – 4,000 rpm Spindle nose: ASA 6’’ Spindle bore: 80 mm Chuck diameter: 250 mm Motor power: 11/15 kW (50%) TAILSTOCK: Rotation range: 40 – 4,000 rpm Spindle nose: ASA 5’’ Spindle bore: 52 mm Chuck diameter: 165 mm Motor power: 5.5/7.5 kW (50%) BI-DIRECTIONAL TURRET: Number of positions: 12 Rotation time: 0.6 sec POWERED TOOLS: Number of positions: 6 Rotation range: 50 – 3,000 rpm Motor power: 3.7 kW (50%) C-AXIS: Type: CS (direct drive) Minimum programmable value: 0.001° Max. rapid traverse: 80 rpm AXES: X-axis travel: 210 + 5 mm Z-axis travel: 500 + 10 mm B-axis travel: 510 + 5 mm X-axis rapid traverse: 20 m/min Pjdpfx Adjz Ig Urjlegu Z-axis rapid traverse: 20 m/min B-axis rapid traverse: 24 m/min COOLANT: Tank capacity: 200 Lt Pump flow rate: 100 Lt/min DIMENSIONS: Overall dimensions with chip conveyor: 4,000 x 1,900 x 1,800h mm Weight with chip conveyor: 5,000 kg Machine complete with: • Drilling kit with tailstock on B-axis for simultaneous drilling and turning • 9 bar pump • Chip removal paddle L 150 mm • Monitoring system • Spindle bore 71 mm • Simple collet chuck, Morse taper 42 • Chuck diameter 165 mm • Instruction manuals and CE declaration

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 6232-07-012, type of input current: AC, total width: 4,100 mm, total length: 4,400 mm, input voltage: 400 V, input current: 380 A, feed length X-axis: 3,200 mm, feed length Y-axis: 3,500 mm, working width: 3,200 mm, total height: 1,400 mm, cutting width (max.): 3,200 mm, cutting height (max.): 3 mm, compressed air connection: 8 bar, Innsbruck, May 19, 2026 Good condition: Used S.M.R.E. SM-320-TA High-Performance CNC cutting plotter (year of manufacture 2012) Are you looking for maximum precision and efficiency for XXL cutting? For sale is a high-performance, industrial conveyor cutting machine from the premium manufacturer S.M.R.E. (SolarEdge Automation Machines). The machine is in very good, ready-to-use condition and is ideal for the continuous processing of technical textiles in large formats. The most important highlights at a glance: Year of manufacture: 2012 Working width: 3,200 mm, table length 3,500 mm – perfect for XXL formats without material division Conveyor system: Robust, multi-layered industrial conveyor belt for automatic, endless material feed Drive & Performance: Powerful 8 kW rated power (400 V) for fast and precise cuts Equipment: Vacuum system for perfect material hold, automatic unwinder with precise material guidance correction, and flexible tool heads (including drag/rotary knives and a marking pen). Location: Innsbruck/Austria Perfectly suitable for: Manufacturers of truck tarpaulins, tents, awnings, advertising banners, pool covers, and sophisticated technical products. Take the opportunity to bring your production to the next level with this modern, extremely reliable system. Ready for immediate use! Dismantling and transport of the machine must be organized and paid for by the customer. Technical information: Cutter IBK Cutting window X 3,500 mm Y 3,200 mm Connection values: 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 30 kW 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 15 kW Podpszuzimofx Adlsgu 1 x 230 VAC 50 Hz 200 W 1 x Oil-free compressed air 0.6 MPa 400 l/min Dimensions: Cutter L x W 4,400 x 4,100 mm Unwinder 1 approx. 2,500 x 4,000 mm including material roll Unwinder 2 approx. 2,000 x 4,000 mm including material roll Safety area all around 1,000 mm => Installation area approx. 11 x 6 m + maneuvering/working area Weight: approx. 2.5 tons

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, rotor diameter: 600 mm, rotor width: 1,000 mm, year of last overhaul: 2026, Shredding mill, heavy-duty version Manufacturer: NEUE HERBOLD, D-74889 Sinsheim Drive: 75 kW Hopper: Conveyor belt hopper Working width: 1000 mm Rotor diameter: 600 mm Year of manufacture 2015, fully overhauled with - new rotor - new hopper - new base frame Pgsdpfoz Ak A Esx Adlou Examples of applications: Shredding of solid lumps, start-up blocks, profiles, beverage crates, boxes, vegetable crates, etc.

Year of construction: 2017, operating hours: 100 h, condition: excellent (used), functionality: fully functional, Equipment: CE marking, The SMRE machine is used for hot air welding of PVC fabrics and synthetic materials. The machine is in like-new condition and has been used very little. The working width is 800 cm. Psdezkqm Hepfx Adlegu

Condition: good (used), Year of construction: 1998, functionality: fully functional, For sale: a K+G Wetter SM-65STL meat grinder/cutter. The machine is entirely made of stainless steel and is ready for immediate use. Power: 380V, 50A, 25kW. Knife shaft with infinitely variable speed adjustment, range 50-5000 rpm. Mixing speed (reverse), range 50-500 rpm. Bowl with 2 speeds, 9/18 rpm. 6-blade knife head. Without a deflector plate. Podpfx Aszxqpwedlogu Further details upon request. Payment by cash or prepayment! Sale only to commercial customers. No guarantee, no warranty.

Condition: used, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Jorns, controller model: OP, working width: 6,000 mm, bending angle (max.): 145 °, number of axes: 5, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, total length: 6,800 mm, total width: 1,650 mm, Equipment: emergency stop, foot remote control, We are offering this used Jorns NL125-SM-OP-6 swiveling bending machine, manufactured in 1992. Manufacturer: Jorns Model: NL125-SM-OP-6 Year of manufacture: 1992 Condition: used Podpfjzmy Eqsx Adlegu Machine type: Swiveling bending machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, wire diameter (max.): 22 mm, type of input current: three-phase, overall weight: 3,000 kg, total width: 2,000 mm, total length: 10,000 mm, total height: 2,300 mm, empty load weight: 3,000 kg, A fully functional, Chinese-made machine for manufacturing pocket springs is for sale. Suitable for mattresses and furniture. Type: SM-B100. Year of manufacture: 2019. Spare parts are readily available, and 24/7 factory support is provided. The machine is located in Hungary, in Budapest. All parts and accessories are included. It has been in perfect working order for 7 years. In addition to this machine, a machine for arranging the pocket springs is required for the complete technological process, which connects the rows of springs. It produces 100 springs per minute and can manufacture springs with lengths ranging from 9 cm to 18 cm. This machine manufactures the springs and packages them in PP bags. The wire collector and the final conveyor belt are also included. It is ready for immediate use. It can be tested in Budapest while in operation. The total weight of the machine is 3000 kg. We will load it onto a truck using a large forklift. An invoice will be issued. If you purchase the machine, we will disassemble it free of charge for transport. Pgsdpfx Aeznwwtedlou

Year of construction: 2019, operating hours: 34,933 h, condition: ready for operation (used), machine/vehicle number: NO-19-05-07358/GE1101824, Technical data (German) Manufacturer: EFD Induction a.s. Type: SINAC 50/80 SM Serial number: NO-19-05-07358/GE1101824 Year of manufacture: 21/19 Electrical data: Input voltage: 400-480 V AC Pgsdpfx Adevw S Rwsleu Input current: 90 A Mains frequency: 50/60 Hz Input power: 62 kVA Reactive power: 62 kVAr Output data: Output voltage: Not specified Output current: 350 A Output power: 50 kW Frequency range: 10-25 kHz Cooling & operating conditions: Water consumption: 21 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54

Year of construction: 2014, condition: used, A knife grinding machine with an enclosed grinding chamber is offered. Control: Electronic control panel with display. Equipped with stainless steel housing, viewing window, knife holder, foot pedal control and swivel casters. Viewing possible by appointment. Psdpo Agn N Nefx Adljgu