Propeller agitator Agitator

Erwin Stelzer Warburg DRX3204D

Condition: used, Year of construction: 2018, operating hours: 806 h, functionality: fully functional, total width: 2,030 mm, total length: 4,450 mm, total height: 2,090 mm, pressure: 3,000 bar, operating pressure: 3,000 bar, fuel: diesel, overall weight: 2,925 kg, water tank capacity: 150 l, volume flow: 1.08 m³/h, fuel tank capacity: 200 l, type of cooling: air, noise level: 85 dB, power: 144 kW (195.79 HP), year of last overhaul: 2026, pump capacity: 18 l/min, Equipment: rotational speed infinitely variable, type plate available, Complete unit in mobile design with soundproof enclosure + accessories, consisting of: (€7,500) 5x hose DN8-20m-3010bar-2x9/16-LH-S 6x complete connector set 9/16 4000 BAR 1x hose DN8-10m-3010bar-2x9/16-LH 1x hose DN5-5m-3010bar-9/16UNF-LH 1x compressed air line DIN10, 20m 1x high-pressure gun HP3000S-E-24V incl. body support and DSA 1x Speedy 3000 1x Orbimaster 2500 0.80-9/16-18UNF LH 1x rotary union TD3000-SCS-9/16 Nlodpsx Svnbjfx Ahksf 1x plug-in foot switch, 2-channel, 24VDC 2x cable drum with cable, 50m 2x bursting disc, operating pressure 3000bar 10x filter cartridge 1µm various nozzles

Condition: ready for operation (used), 11x DRK 26 H mixers from Erwin Stelzer Warburg, equipped with emergency stop switches. 8x with propeller, 3x without propeller. Product specifications: 1 kW 220/380 V 5.9/3.4 amps 920 rpm 2.7 hp 0.64 cos φ Insulation class E Shaft length 400 mm Nledpfx Ahsfr Ianjksf Shaft diameter 30 mm Overall length 800 mm Impeller diameter 240 mm Connection: DN125

Year of construction: 1991, condition: used, For sale is a propeller mixer from Geppert Rührtechnik. It is the SPF 4 /1.1 model. Year of manufacture: 1991. Mixer data: Nedoga D Erjpfx Ahkjlf RPM: 1400 V: 220 - 380 kW: 1.1 Shaft length: 1010mm Impeller diameter: 180mm Connection: DN80

Condition: good (used), Beading machine, flanging machine, seam closing machine, motorized beading machine Nlodpfxeb A Ncre Ahkef -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Protrusion: 50 mm -Dimensions: 900/800/H1100 mm -Weight: 250 kg

Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is model 8M 63G.D2. Data for the agitator: RPM: 225 V: 220 / 380 kW: 1.5 Shaft length: 500mm Impeller diameter: 240mm Connection: DN200 Nledpfjga I T Iox Ahkof Further information can be found on the nameplate.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min 32A plug Nlsdpfjxugifsx Ahkjf Best regards, STS-Reinigungstechnik Team

Condition: used, For sale is a propeller mixer from Erwin Stelzer Warburg. It is model SM/62E.D2. Nlodpfoga I Tyex Ahkef Mixer specifications: RPM: 985 V: 230 / 400 kW: 0.75 Shaft length: 400 mm Propeller diameter: 220 mm Connection: DN200 For further information, please refer to the nameplate.

Condition: ready for operation (used), For sale is the propeller agitator DRK8P6/12D from Erwin Stelzer Warburg. Product data: 18/4 kW 380V 34.2/10.8 A 980/480 RPM Shaft length 780mm Impeller diameter 420mm Nsdpfx Aefr Ifdshkelf 0.92/0.68 cos IP 44 50 Hz Operating mode S1 Insulation class E Nameplate (photo)

Year of construction: 2026, condition: new, functionality: fully functional, Welding table 1200x800x15, 28mm system (milled and countersunk holes, diagonal grid with metric division) Tools included in the set: - small tower 300mm – 1 pc, - crescent – 1 pc, - slotted stop – 1 pc, - large stop – 1 pc, - 90-degree stop – 1 pc, - three-hole angle bracket – 1 pc, - knurled pin – 2 pcs, - disc – 1 pc, - prism – 1 pc, Nodpfx Ahjyk Epdskslf - vertical clamp – 1 pc, - forged clamp 120x300 – 1 pc, - pipe clamp – 1 pc, - adjustable clamp – 1 pc, - automatic clamp – 1 pc, - wheels – 4 pcs.

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm -Length: 2550 mm -Weight: 70 kg Nledpsb A Nlmjfx Ahkof