Used Egli V1 for sale (1,008)

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Usage: Frozen Block cutter for butter and similar products Electrics: 3~ / 400 v/50hz Air: 6 bar -8bar Predjz Ht Ebjpfx Adlec

Condition: excellent (used), Year of construction: 2001, Grid melter for blocks up to 25 kg. Designed for melting hard or frozen blocks of butter/margarine/fats for further processing. Capacity: 50-10,000 kg/h, and CIP cleanable, with 4 spray balls. Hot water (120°C - 2 bar) runs through the grid and bottom (spiral shape). Equipped with a double-acting pneumatic cylinder on the inlet cover. Includes connections for temperature and level sensors. Special horizontal and centrally positioned agitator with vanes below the grid (EDW 1-3 agitator). Documentation: operating and maintenance instructions available. Currently without controls. Prodpfj Agfh Usx Adloc

Condition: refurbished (used), The EGLI 1700 Butter Churn is capable of a capacity of 900 litre of cream with a 60% butter output. The machine materials are stainless steel 316 L at contactable surfaces with the product. The gears and motors are covered with metal with a paint coating. The machine was used for very little after full refurbishment in 2022. New control panel for the start of the churn . Butter Churn: EGLI Volume: 1700L total capacity Cream capacity: 850L S.N: DM1700UK Condition: Refurbished Available: immediately Pedjx Nca Eopfx Adlsrc Location: In stock

Condition: used, Year of construction: 2020, operating hours: 87 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input current: 2 A, Equipment: type plate available, Used FINIMAC blasting cabinet/shot blasting machine for sale, model V1, manufactured in 2020 (serial number 2733), by FINIMAC (Vittuone, Milan, Italy). Second-hand equipment, with very little use – the internal counter registers approximately 87 operating hours. Cabinet with inspection window, two work gloves for handling parts, control pedal, pressure gauge, and its own control panel (main switch, emergency stop button, and hour counter). 400V three-phase power supply. Internal identification "M63". Psdpfxezvdfms Adlerc Condition: used equipment (not new/factory), functions normally, tested and operational.

Condition: good (used), Year of construction: 2003, CNC - lathe machine Machine type: DMG CTX 410 V1 Control: Heidenhain CNCPilot 4290 Year: 2003 Working hours: 11.080 h SPECIFICATIONS Max. swing over slide: 365 mm Turningdiameter: 420 mm Bar capacity: 67 mm Max. turning length: 600 mm Spindle speeds: 25 - 5.000 rpm Spindle power: 28 / 21 kW Travel X-Axis: 250 mm Z-Axis: 600 mm Prodpfx Adsz Dkt Rjlec Tool capacity: 12 Tool: VDI 30 Tailstock Equipment Chip conveyor

Condition: good (used), Year of construction: 2006, CNC - lathe machine Machine type: DMG Gildemeister NEF 600 Control: Heidenhain IT Turn Plus Year: 2006 SPECIFICATIONS Max. turning length: 1.250 mm Max. swing over bed: 600 mm Max. swing over slide: 410 mm Predpoziyz Djfx Adlsc Spindle bore: 90 mm Amount of controlled axes: 2 Spindle speeds: 3.000 rpm Spindle power: 36,5 / 27,5 kW Torque: 785 Nm Tailstock: MK 5 Quill: 80mm Amount of turrets: 1 Tool: VDI 40/8 Tool capacity: 8 Machine weight: 5.500 kg Req. space (LxBxH): 5,0 x 2,0 x 2,2 m m Equipment Chip conveyor 3-jaw chuck: 315 mm Main Spindle: neu gelagert Innenraum neu lackiert Wartungspaket

Condition: ready for operation (used), Year of construction: 2012, operating hours: 9,020 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: MXP-200FB, workpiece weight (max.): 800 kg, total height: 2,765 mm, total length: 3,650 mm, total width: 2,950 mm, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 9,020 h, spindle motor power: 11,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition from a production environment, and it has always been well-maintained. The machine is in excellent mechanical and visual condition and is currently set up and operational in our showroom! Additional options & accessories: Prsdpfx Ae Abkdwodlsc - Chip conveyor - Internal cooling system (ICS) - 30-position tool changer (standard 20 positions) - Electronic handwheel - Air and coolant gun - All original documentation - Oil skimmer

Condition: used, Year of construction: 2016, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 7,800 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 3,680 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MTcut V110, 15th unit Year of manufacture: 2016 Heidenhain iTNC 530 control system Spindle speed up to 15,000 rpm 60-tool automatic tool changer, SK40 Psdpfezphdajx Adlerc Internal coolant system, 20 bar Chip conveyor Total operating hours: 26,882 Spindle operating hours: 3,106

Condition: good (used), Year of construction: 1996, Motor for light-duty overhead cranes. Hook travel: 3 m Load capacity: 0.4 t Width: approx. 500 mm Height: approx. 300 mm Prodpfxey Urlnj Adljc Depth: approx. 300 mm Weight: approx. 25 kg Condition: good, second-hand

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, load capacity: 1,000 kg, lifting height: 5,000 mm, Electric chain hoist Pedpfxsv Uvn Io Adlsrc DEMAG DKUN10-1000 K V1 Load capacity 1000 kg, 2/1 Hook travel 5 m Year of manufacture 2006 Without control unit, otherwise complete Very good condition Various electric chain hoists in stock Good condition Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Condition: good (used), Speed head up to 30.000 rpm Prodpszk U Stefx Adlec

Condition: used, Year of construction: 2008, machine/vehicle number: 240-124, functionality: fully functional, pressing force: 160 t, stroke length: 800 mm, table width: 1,600 mm, table length: 1,200 mm, table height: 650 mm, total length: 1,900 mm, total width: 3,600 mm, total height: 3,300 mm, Equipment: documentation/manual, Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm For sale is a hydraulic sub-platen press from the manufacturer LÄPPLE with a maximum pressing force of 160 T. The machine has a table size of 1,200 × 1,600 mm, an open height of 1,050 mm, and a stroke of 800 mm, and is particularly suitable for forming, straightening, pressing, and assembly work in industrial applications. The press is equipped with a PILZ control system and has an electrical version for operation on a 3 × 400 V AC power supply. ##### Technical data + information: Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm ==== General information - Reference ID: TPT-07 - Manufacturer: LÄPPLE - Type: Hydraulic sub-platen press - Model: TV1600-50 - Machine number: 240-124 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 1,200 × 1,600 mm - Table height: 650 mm - Open height: 1,050 mm - Stroke: 800 mm - Overall height: 3,300 mm - Overall width: 3,600 mm - Overall depth: 1,900 mm - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 240 bar - Idle travel downwards: 10 mm/s - Idle travel upwards: 28 mm/s - Initial pressing speed: 10 mm/s Prodpfx As Ad Antedlsc ==== Hydraulics & drive - Main motor: 22 kW ==== Control system - Control system: PILZ - Control panel: on the frame - Electrical design: EPLAN 5.40 - Electrical documentation: wemascon Zeulenroda GmbH ==== Safety - Safety control system: PILZ - Light curtain / light barrier: available - Two-hand operation: available - CE-compliant design - Slug damping: no - Maintenance platform: no ==== Electrical connection - Main supply: 3 × 400 V AC - Frequency: 50 Hz - Power supply: PE/N - Fuses: 63 A - Rated current of the system: 47 A - Control voltage: 24 V DC ##### Application areas: Forming, straightening, pressing, assembly work, toolmaking, mechanical engineering, metal processing, maintenance, pressing operations, series production (Hydraulic sub-platen press, sub-platen press, hydraulic press, LÄPPLE press, LÄPPLE TV1600-50, 160 T press, 160-ton press, forming press, straightening press, pressing press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of customized machines and press automation. We distribute tailor-made hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: FANUC 0i-MF Plus, total height: 3,030 mm, total length: 3,240 mm, total width: 2,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 500 kg, overall weight: 6,990 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15 W, spindle nose: DIN 40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 280 mm, tool diameter: 76 mm, tool weight: 7 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used 3-axis vertical machining center with FANUC CNC Prjdoz Smdwepfx Adlsc

Condition: like new (used), Year of construction: 2006, operating hours: 671 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. Pedpfszxz Dfjx Adlerc There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 460 mm, total length: 2,000 mm, total height: 1,750 mm, warranty duration: 12 months,  Power of Phoseon FJ/100 one UV LED lamps, 150 mm. 8 Watt  Radiating unit – width x height: 150 x 200 mm.  Steel slat conveyor belt with a 360° rotating part system and one UV LED lamp.  Conveyor belt speed: 5/14 m/min Pedpfxo Afdaaj Adljrc  Maximum height of incoming objects: 160 mm  Maximum diameter of incoming objects: 120 mm  Belt length: 1500 mm  Maximum operating temperature of UV LED (COLD)  Power supply: 220 Volt – 50/60 Hz  Dimensions: 2000 x 460 x 1750 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, Quaser MV 154 PL, Year of manufacture: 2008, Pedpfxo Aawnyo Adlerc Control system: Heidenhain iTNC 530, Travel range X/Y/Z: 1000/530/560 mm, Tool changer: 30-position, SK 40, Air blow-through spindle, Internal cooling system (IKZ): 20 bar, Chip conveyor, 3D measuring probe, Thermal compensation, Temperature-controlled oil cooling system, Spindle replaced in 2021.

Condition: new, functionality: fully functional, The Trimos V1+ is the enhanced version of the proven V1 and is ideal for users seeking top precision combined with effortless operation. It offers all the benefits of the V1, complemented by bidirectional measurement that enables diameter, centerline, and comparative measurements – a real advantage over conventional entry-level models. Manufactured in Switzerland, the V1+ stands for quality, durability, and outstanding repeatability. It is perfectly suited for workshop, inspection room, and production environments. Thanks to its ergonomic design, stable base, and sensitive guidance, the V1+ can be operated precisely and safely. The constant measuring force ensures consistently reliable results. Models V1+: V1+ – 600 Measuring range (mm): 611 Accuracy (mm): 0.025 Psdoxu T Emopfx Adljrc Repeatability (mm): 0.005 (Ø: 0.01) Resolution (mm): 0.001 Measuring force (N): 3 Autonomy (h): 2000 Max. travel speed (mm/s): 1500 Weight (kg): 8 (steel base) / 15 (granite base)

Condition: new, functionality: fully functional, The Trimos V1 is ideal for anyone taking their first steps into the world of precision measurement technology. This compact height gauge greatly simplifies single-axis measurements and scribing tasks with impressive ease. For users who have previously worked with manual height scribers, the V1 offers the perfect transition to a modern precision instrument—without having to compromise on ease of use or robustness. Manufactured to the proven Swiss quality standard, the Trimos V1 stands for durability, reliability, and the highest accuracy. Its ergonomic design and intuitive operation make it ready for immediate use—ideal for workshops, inspection rooms, and training environments. Key Advantages at a Glance: - Ideal for beginners in precision height measurement - Easy handling and robust construction - Perfect alternative to traditional manual scribers - Swiss precision and longevity - Ready to use for reliable measurement results Psdpfx Adjxu Dd Telsrc Model V1: V1 – 600 Measuring range (mm): 611 Accuracy (mm): 0.030 Repeatability (mm): 0.010 Resolution (mm): 0.01 Autonomy (h): 2000 Max. Traverse speed (mm/s): 1500 Weight (kg): 8

Condition: good (used), Hoisting motor with chain hoist and control panel. Load capacity: 1/1 125 kg 8 m/min. 2/1 250 kg 4 m/min. Psdpozcm R Tofx Adlorc Depth: 300 mm Height: 400 mm Width: 500 mm Weight: approx. 22 kg (net) Condition: good, second-hand

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Payload 5000KG / 5t payload / lifting load - 2-strand with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Prsdpfxjrft Nze Adlsc Complete weight approx. 120 kg, connection to 400V 50Hz Used Condition Item location is 75053 Gondelsheim See pictures

Condition: new, functionality: fully functional, The Trimos V1 is ideal for anyone taking their first steps in the world of precision measurement technology. This compact height gauge simplifies single-axis measurements and scribing tasks in an impressively straightforward manner. For users who have previously worked with manual scribing height gauges, the V1 offers the perfect transition to a modern precision instrument—without sacrificing ease of use or robustness. Manufactured according to proven Swiss quality standards, the Trimos V1 stands for durability, reliability, and the highest level of accuracy. Its ergonomic design and intuitive operation make it immediately ready for use—ideal for workshops, inspection rooms, and training environments. Prodpfexu Dc Aox Adljc Key Benefits at a Glance: - Ideal for beginners in precise height measurement - Easy handling and robust construction - Perfect alternative to the classic manual scriber - Swiss precision and durability - Immediately ready for use for reliable measurement results Model V1: V1 – 300 Measuring range (mm): 306 Accuracy (mm): 0.018 Repeatability (mm): 0.010 Resolution (mm): 0.01 Battery life (h): 2000 Max. travel speed (mm/s): 1500 Weight (kg): 7

Condition: used, Year of construction: 2022, total length: 2,460 mm, total width: 1,460 mm, total height: 1,850 mm, Diesel tank – Type FM2500 – Weight 250 kg – Dimensions 246 cm x 146 cm x 185 cm = Further information = Fuel type: Diesel Year of manufacture: 2022 Model year: 2022 Unladen weight: 250 kg Pedpfezlu A Ijx Adlerc Reference number: V1 = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Year of construction: 2022, Matt HV 1216 suspended shot blasting machine. Two 11kW turbines. In very good condition, lightly used. Podpfxeztkzie Adljrc

Condition: new, functionality: fully functional, The Trimos V1+G stands for Swiss precision at the highest level – combined with simple, intuitive operation. The solid granite base ensures absolute stability, making the device the perfect choice for precise height and comparative measurements in workshop and production environments. The V1+G has been developed for users seeking a robust, durable, and straightforward height measuring instrument. It simplifies daily measurement tasks and, thanks to bidirectional measuring capability, also offers functions for diameter, centerline, and reference measurements – all without complicated menu navigation or extensive training. Model V1+: V1+ – 600 Measuring range (mm): 611 Accuracy (mm): 0.025 Repeatability (mm): 0.005 (Ø: 0.01) Resolution (mm): 0.001 Measuring force (N): 3 Autonomy (h): 2000 Max. traversing speed (mm/s): 1500 Podpfx Asxu T Hwedlsrc Weight (kg): 15

Condition: used, Weiss   Weiss ShockEvent D/210/a/V1   Type of equipment: Temperature-controlled shock testing chamber   Testing principle: Stationary test chamber with supply of warm, cold, and ambient air via flaps   Test chamber volume: approx. 210 liters   Usable test chamber width / height according to installation plan: 700 / 500 mm   Installation dimensions according to installation plan (W × D × H): approx. 1,480 × 1,670 × 1,967 mm, plus space for attachments   Weight: approx. 1,350 kg   Temperature range, warm chamber: +50 to +225 °C Temperature range, test chamber, warm phase: +50 to +200 °C Temperature range, test chamber, cold phase: −65 to 0 °C Temperature range, cold chamber: −70 to 0 °C   Heating rate: 18 K/min, i.e. 18 °C Cooling rate: 2 K/min, i.e. 2 °C   Temperature deviation over time: ±0.3 to ±0.5 K in steady state Temperature homogeneity spatially: ±0.5 to ±1.5 K   Heat compensation, cold phase: max. 6,000 W at −20 °C Heat compensation, warm phase: 0 W   Maximum load, test chamber floor: 100 kg, evenly distributed   Maximum number of insert baskets: 7 pieces Maximum load per insert basket: 7.5 kg Maximum total load of insert baskets: 50 kg Distance between insert baskets: 50 mm   Operation: WEBPanel touch display with WEBSeason®   Pedpfoz Rwk Rex Adlerc Remote control: via computer, smartphone, or tablet   Interfaces: Ethernet, USB, and digital I/O   Power connection: 3/N/PE AC 400 V ±10 %, 50 Hz; actual design according to nameplate   Other connection options according to instructions: 380 V / 50 Hz or optionally 440 V / 60 Hz Rated power: 31.9 kW Rated current: 57 A On-site protection: 63 A slow-blow fuse Protection class, control cabinet and operating unit: IP23   Cooling: water-cooled Cooling water connections: Supply and return, each 1" internal thread   Cooling water temperature: +12 to +28 °C Cooling water pressure: 2.5 to 6 bar Differential pressure, cooling water circuit: over 2 bar   Cooling water consumption under full load with 18 °C inlet and 10 K heating: 2.9 m³/h Cooling water consumption under full load with 28 °C inlet and 5 K heating: 5.8 m³/h   Maximum heat dissipation to the cooling water: 33.7 kW Maximum heat dissipation to the installation room: 1 kW   Compressed air supply: 4 to 10 bar overpressure Compressed air connection: quick-release coupling DN 7.2 Compressed air temperature: +2 to +50 °C   Condensate drain: hose connection Ø 8 mm   Sound pressure level: approx. 63 dB(A)   Permissible ambient temperature during operation: +10 to +35 °C   Permissible relative humidity at the installation location: max. 75 %   Refrigerant: R449A 3.5 kg R469A 2.5 kg   Shipping or freight transport possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.