Used Edge Milling And Cross-Cutting Machine for sale (73,192)

Condition: excellent (used), SCM internships in excellent condition Nedst Hkq Rspfx Ad Sslc

Condition: good (used), Year of construction: 1996, functionality: fully functional, Diameter x width: 750 x 1,500 mm max. operating pressure 300 bar Cutting force 60 kN Weight: approx. 2,800 kg Nodpoqnvtzjfx Ad Sjlc 76 chisel

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Cross-cut saw: max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm motor 3.7kW side carriage adjustable up/down clamp on the carriage Nledpfxsy Snyis Ad Soc table + fence with angle adjustment 600x400mm dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. - 1.1kw engine. - We will help you organize a profitable shipping company or courier. Nsdpfxsv T Ttfs Ad Solc

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Nedpewt Abwefx Ad Selc Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Model : CB 18 . Series : B20 . Njdpfxszfwh To Ad Sslc

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Connection plug broken -Power: 0.4 kW 11300 rpm at 200 Hz Nedsb A Tagspfx Ad Selc -Voltage: 133 volts -Acquisition shaft: 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC-Steuerung Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Nljdeym Nbcepfx Ad Ssc Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW Nljdpfx Adezcd D Ro Sec - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm Nlsdpozccuusfx Ad Sjc - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2012, Automatic loading table Milling unit with 10 spindles, also inclined Nedpfx Aoy Egzxsd Solc Swing machine FOM Spring 50 blade 500 mm horizontal Automatic unloading table

Condition: used, Suitable for UNITEC 10 or similar models, Njdpfx Ajlkckmjd Solc Year of manufacture: 1998 CNC controlled, motor-driven, Quantity: 2 Price per unit: 2,000.00 € + VAT.

Condition: good (used), Stegherr 2 motors, each approximately 2.2 kW Connected load approximately 4.5 kW Compressed air 6 bar Voltage 380 V, 50 Hz Nledpfx Adjzakw Ej Sjc

Condition: used, Welding edge former INDUMASCH SIEGEN type V 12 Machine. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45° Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 Volt, 50 Hz Nedpfx Asrz Tupod Sslc - Forward / return - Built-in guide roller for 45° bevel angle - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm weight 75 kg good condition

Condition: good (used), Year of construction: 2000, Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm Nlodpfx Adey Rt Aae Soc -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg

Condition: new, Edge and contour milling machine Manufacturer: Assfalg Model: KKE 1 Condition: New machine Speed: 8,000 - 24,000 rpm (continuously variable) Maximum chamfer width: 3 mm Standard equipment includes: - Guide rail - Allen wrench, open-end wrench - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with lock nut Njdpfxjbhfzbs Ad Solc - Operating manual

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides Nedpfxeb A Nmde Ad Solc -Quantity: 1 motor available with left-hand thread -Price: per piece -Weight: 20 kg/piece

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Nlsdpfx Ader A Eq Rj Soc Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We are offering this like-new LIYU IECHO TK4s cutting plotter / CNC milling machine, manufactured in 2022. Manufacturer: LIYU IECHO Model: TK4s Year of manufacture: 2022 Condition: like new Nljdpfx Aoy Tk R Hjd Soc Machine type: cutting plotter / CNC milling machine PLATINUM Q-CUT 3532 flatbed cutter with camera + 1.8 kW milling module Includes software, monitor, and PC. Used sparingly and in excellent condition. Working area of 3500 x 3200 mm Equipped with an automatic camera positioning system (CCD), regional vacuum system, AKI system for precise blade depth adjustment, and 2 motors on the X-axis for high accuracy and clean cutting results. Material thickness up to 45 mm Max. cutting speed 1500 mm/s Cutting accuracy ± 0.1 mm Formats: PLT, DXF, HPGL, PDF, EPS Vacuum pump: 7.5 kW 6-zone control system Two cutting heads, safety device, automatic tool adjustment Tools / Applications Kiss-cut, UCT, EOT, EOT3, PRT, DRT, V-CUT, CTT, 1.8 kW router, punching tool. Suitable for cardboard, DiBond, Forex, MDF, wood, acrylic, Plexiglas, vinyl, and many other materials. Cutting area: 3500 mm x 3200 mm Tools: Electric oscillating tool, tangent knife, creasing tool, kiss-cut tool, powerful rotary tool Camera system AKI system Cutting accuracy: 0.1 mm Power supply: 220 V 50 Hz / 380 V 50 Hz Automatic camera positioning system Disassembly, reassembly, and transportation costs are additional. A quote for disassembly, reassembly, and training is available from the manufacturer! If the distance is significant, inspection can also be done via live video. All information is provided without guarantee. Subject to change, errors, and omissions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2018, LARA CDCH-1400 SHEAR (year 2018) With discharge table. Hydraulic shear designed for cross-cutting strip material and managing scrap in coil feed lines. Supplied together with a discharge table, allowing for convenient and safe evacuation of cut material while maintaining a clean and continuous production process. Robust equipment with heavy-duty industrial construction, especially suited as an auxiliary component for cutting, stamping, or coil-feeding lines. Main Features • Hydraulic cross-cut shear Nedpfxsy Edlhj Ad Sjlc • Hydraulic drive • Robust design for continuous operation • Clean and precise cutting of metal strip • Integrated discharge table • Facilitates evacuation of scrap and off-cuts • Improves ergonomics and orderliness on the line • Keeps the work area clear • Heavy-duty industrial construction • Rigid and stable frame • Designed to be integrated at the same height as the LARA feeder/straightener • Easy integration into existing lines • Safety system • Integrated into the line control system • Designed in compliance with CE standards Work Materials • Carbon steel • Stainless steel • Aluminum and light alloys Main Technical Data • Maximum working width: up to 1,400 mm • Type of drive: hydraulic • Working pressure: 4–6 bar (pneumatic control system) • Power supply: 400 V / 50 Hz

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting width (max.): 3,200 mm, cutting length (max.): 2,200 mm, SUMMA F3220 – Professional Large-Format Cutting Table (2020) SUMMA F3220 - Working area: 327 x 210 cm - Vacuum extraction system 2.3 kW / Noise absorber - Package with 6 pneumatic media clamps + roll holder - Integrated camera - ADC Control module left + right Nedpoy Sapvofx Ad Solc INCLUDED MODULES AND TOOLS - Tangential module (x2) - V-Cut 45° - V-Cut 0° - Heavy Duty Cutout Tool (45° / 90°) - Double Edge Cutout Tool (50° / 60°) - Pneumatic oscillating tool - Creasing tool HIGH-FREQUENCY MILLING MODULE Complete high-frequency milling kit: - Routing module with brush system - SycoTec milling motor - Integrated electronics + vacuum control - 6 mm collet Additional accessories - Industrial vacuum cleaner HERCULES 3000W

Condition: excellent (used), Year of construction: 2002, The KSF-2E is the world’s leading specialized CNC milling machine for fully automated production and complete machining of high-quality cross joints and grids in the serial manufacturing of glazing bars for windows and doors. Thanks to its dedicated aggregates, the machine produces cross joints from wood, aluminium, MDF, or PVC with outstanding quality and precisely processes all components of the glazing bar grids. OPERATIONS: • Cross joints in various designs and sizes • End processing of glazing bars • Cutting frame profiles to size Nledpjxl Dnaefx Ad Ssc The machine is additionally equipped with a transverse feed/magazine for components.

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW Nledpfx Adou Ngfdj Sjc machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: new, Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Nledpfx Adsq Ny Efo Sjc Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/Ф140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Condition: used, Year of construction: 1979, Format: 920??1300 mm Equipment: Maximum sheet size 920??1300 mm, minimum size 560??1300 mm opening width within frame 920??1310 mm, maximum die size 910??1300 mm maximum die-cutting area 900??1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm Njdpfxsy Iu Rte Ad Selc maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t