Used Dilo Ud-Ii/25 for sale (17,314)

Year of construction: 1978, condition: ready for operation (used), Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible. Nwsdpjxtpq Nefx Ag Ion

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Nwedpfxjzhntro Ag Ien

Year of construction: 2025, condition: new, functionality: fully functional, working width: 2,400 mm, wire diameter (max.): 8 mm, mesh size: 6,000 mm, welding power (max.): 900 kVA, Double cross wire mesh welder VM-15/25-1000NC-UD-2C Technical characteristics - power: 14 x 63 kVA - drawing motors: 155 kW - el. voltage: 3 x 400 VAC - controlled by: PC - wire mesh dimension: 6000 x 2000 mm Nedpfouv Eg Hox Ag Iswn - wire diameter: 4-8 mm/6-10 mm - distance between line wires 150 mm and 200 mm - distance between cross wires from 150 to 200 mm - working speed 180 cross wires/min - machine dimension: 55 x 11 x 4 mm - machine is operated by two workers

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Nodjmi Rpiepfx Ag Iown 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Year of construction: 2007, condition: ready for operation (used), Four metalworking machines are offered. 1) Cloos GLC 255 MIG/MAG welding machine, year of manufacture: 2004, dimensions X/Y/Z: approx. 980mm/450mm/700mm, weight: approx. 115kg. 2) Cloos GLC 353 MC3 MIG/MAG pulsed welding machine, year of manufacture: 2007, weight: approx. 160kg. 3) hebö Type II bar twister, year of manufacture: 1979. 4) Eisele VMS II PV-p circular saw, year of manufacture: 1974, weight: approx. 290kg. Inspection by prior arrangement is possible. Nedpfxjzp Rhhs Ag Iswn

Condition: excellent (used), Year of construction: 2022, Weinig Dimter ProfiPress L II Comfort 2500 x 1300 Wooden input length min./max. 800 - 2500 mm Timber widths min./max. 40 - 150 mm Unequal fin width in a panel Wood thicknesses min./max. 4 - 30 mm Plate end widths variable min. / max. 200 - 1300 mm Glue / adhesive type PVAc (Polyvinyl Acetate) Total pressing force max. 240 kN Press force per cylinder max. 24 kN - min. 4.4 kN Filling width of the press per cycle min. 1150 mm - max. 1350 mm Filling area of the press per cycle max. 3.25 m² Min. area occupancy per filling 50 % Max. recommended values are: Specific pressing pressure for softwood approx. 1.0 N/mm² specific pressing pressure for hardwood approx. 1.4 N/mm² Glue station GS 100 - 2,5 m Nwodpfx Agez Dh S Rs Ijn Heizung Hochfrequenz mit Generator, luftgekühlt Generator 30 kW, luftgekühlt Outfeed conveyor 2500mm Full description on request. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2007, Make: MAZAK Type of machine: QuickTurn Nexus 250-II Year of manufacture: 2007 Control system: Mazatrol Matrix Nexus Machine's weight: 5.200 kg Nwjdpfx Agoy I Uvie Ien Tool holder: BMT Speed range: 4.000 1/min Cutting diameter: 380 mm Turning length: 500 mm Tool turret - slots: 12 Pl. Spindle opening: 76 mm

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 2620 mm Measurements depth 4865 mm Machine weight 11700 kg Control Unit Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Z-Axis Movement 670 mm Turret Tool taper VDI 40 Nwjdpfx Ajx D R Rfjg Ien This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Nwedpfjzil S Iox Ag Isn Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: good (used), Year of construction: 1989, sheet width 2520 mm plate thickness 2.5 mm bending angle max. 135 ° stroke of upper beam 250 mm adjustment UW 80.0 mm back stop - adjustable ca. 925 mm work height max. ca. 935 mm total power requirement 6.0 kW weight of the machine ca. 2500 kg. dimensions of the machine ca. 3600 x 1650 x 1425 mm good condition (!!) with 1x split set of goat foot tools Equipment: - dynamic, powerful motorized folding machine - SCHRÃ?DER NC control unit "POS 800" with LCD display * Fast programming of individual parts Nodpfx Aey Raiyjg Iswn - Control panel, front right - NC electro-motorized back gauge * with rear sheet support surface - Manual lower beam adjustment - 1x free-moving double foot switch - 1x extra bending machine .. B = 10.0 mm * built-in bending rail with .. B = 25.0 mm - 1x split set of goat foot tools ... H = 130 mm * a pointed rail is installed - Operating instructions

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm Nwsdovaatfopfx Ag Ien with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: ready for operation (used), functionality: fully functional, operating hours: 12,341 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load Capacity Load capacity: 2,500 kg Mast Mast type: Triplex mast with full free lift Lifting height: 6,430 mm Free lift: available Drive and Battery Drive type: Electric Battery type: Lithium-ion Battery year of manufacture: 04/2019 Battery voltage: 90 V Battery capacity: 268 Ah Measured idle voltage: 95.3 V Hydraulics Hydraulic valves: 3rd and 4th valve Fork positioner: Multi-directional fork positioner Side shifter: available MACHINE DETAILS General Manufacturer: Linde Type: E25 Year of manufacture: 2019 Operating hours: 12,341 h Own weight: 5,300 kg Dimensions Overall length: 3,650 mm Overall width: 1,150 mm Overall height: 2,824 mm Inspections and Service Service valid until: 09/2027 UVV (occupational safety) valid until: 09/2027 EQUIPMENT Full cabin without driver's door Heater Windshield wiper Tilt angle display White, non-marking tires LED work light (front) LED work light (rear) Road traffic lighting with turn signals Nwjdpjz R D A Tofx Ag Ien Orange warning light Safety light (front) Safety light (rear) Rear view camera Comfort seat All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 254

Condition: used, Year of construction: 2010, machine/vehicle number: PR29, Used AOKI SBIII-250LS-50 blow molding machine - Year 2010Technical Specifications & Performance DataUsed AOKI SBIII-250LS-50 blow molding machine for industrial packaging and PET container production. This machine is designed to form bottles from preforms, supporting efficient bottle manufacturing as part of a used bottling line or an independent container production operation.Manufacturer: AOKI TECHNICAL LABORATORY, INC.Model: SBIII-250LS-50Year of manufacture: 2010Electrical supply: 3-phase AC, 220 V, 60 HzInstalled power: 50.2 kWCurrent: 165 AMachine weight: 10,400 kgHydraulic pressure: 14.0 MPaPneumatic pressure: 3.0 MPaWater supply pressure: 0.3 MPaAdvanced Automation & Control SystemsThe AOKI SBIII-250LS-50 operates on a 3-phase AC electrical supply rated at 220 V and 60 Hz. Its 50.2 kW power requirement and 165 A current rating should be considered when planning electrical distribution, protection devices and control-panel connection. Blow molding machines of this type are intended for repeatable preform processing and controlled bottle forming in industrial packaging environments.The machine uses hydraulic, pneumatic and water services as part of its operating configuration. These utilities support the forming process and should be connected through suitably rated site installations.Production Line Integration CapabilitiesThis AOKI blow molding machine can operate as the bottle production stage of a PET beverage production line. It is typically installed upstream of downstream bottling equipment such as rinsing, filling, capping, labeling, secondary packaging and palletizing systems. Bottle transfer, accumulation and conveyor interfaces should be matched to the required production layout.As a second hand machine for industrial packaging, it can support PET bottle supply for beverage production and other packaging operations where preforms are converted into finished containers before filling.Machine Condition & Maintenance HistoryThe machine is identified as used and is offered as a blow molding machine manufactured in 2010. Its substantial 10,400 kg construction indicates a stationary industrial installation requiring appropriate handling equipment during loading, positioning and commissioning.Routine commissioning should include inspection of electrical connections, hydraulic circuits, pneumatic supply lines, water supply connections and all machine safety systems before production use.Operational Performance & VersatilityThe SBIII-250LS-50 is intended for PET bottle manufacturing from preforms. In a bottling equipment configuration, a blow molder provides the container supply stage ahead of filling and packaging operations, helping coordinate bottle availability with the production line’s filling demand.Its utility requirements include hydraulic pressure of 14.0 MPa, pneumatic pressure of 3.0 MPa and water supply pressure of 0.3 MPa. Stable utility conditions are important for consistent machine operation in a PET packaging process.Install... Nwede Adttgepfx Ag Ijn

Condition: used, maximum load weight: 29,352 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, loading space volume: 102 m³, Equipment: ABS, VEHICLE NUMBER: 2814 EXTERIOR EQUIPMENT: * Galvanized frame * Sliding tarpaulin, neutral, without lettering/stickers * Additional tarpaulin tensioner at the front * Steel corner supports at the front and rear * Sliding roof Schmitz Safety Roof (Edscha) * Lifting roof with stanchion lifter * Body with adjustable height at the front: 7 x 50mm / at the rear: 4 x 50mm * Ferry equipment for solo/unaccompanied transport * Reinforced HD frame at the front * Underrun protection, bolted, FERRY type with sliding skid * Trailer information system Smart-Board with axle load display * Tarpaulin rope * Steel rear impact guard Nwedpfx Agswibi Sj Ijn * Document box TECHNICAL FEATURES: * Rotos axles with disc brakes * Air suspension with anti-roll bar on the first axle * Tires 435/50 19.5 * Tread depth in mm: 1st axle: 11/11, 2nd axle: 8/8, 3rd axle: 7/7 * Lashing points in the outer frame * Lashing eyes: 7 pairs of 2 tons and 11 pairs of 5 tons * Pallet stop on both sides * Certificate for load securing EN 12642 Code XL, Daimler 9.5, beverages * Reinforced cargo floor * EX/II approval * Unladen weight 6,648 kg * Fifth wheel height 925mm * TÜV/MOT: 12/25, Next inspection: * Example lease-purchase: €279 per month, term 36 months, 10% down payment (can also be your used vehicle), 10% final payment. * Delivery to your location possible. Trade-in/Leasing/Financing. We can make it happen!

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Nwedpfozun T Esx Ag Ijn

Condition: used, Year of construction: 1983, turning diameter over bed 1790 mm turning diameter over slide rest 1250 mm turning length 5000 mm faceplate 1250 mm workpiece weight 45 t control Siemens type System 8 T mm turning speeds 1,1-300 U/min total power requirement 72 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Nodpfxjy D A D Tj Ag Iewn If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Njdpfx Ajvy It Teg Iswn Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Condition: good (used), Year of construction: 1986, turning diameter: 1,260 mm, * Distance between centers: 11000 mm Nsdpfx Agjuh Slkj Iown * Roll diameter: max. 1260 mm * Max workpiece weight: 22.4 T

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Nwedpfx Aju Nfinog Isn Accessories: - Steel plate 1170x860x80mm *

Condition: like new (used), functionality: fully functional, machine/vehicle number: EX-006-S25, Year of construction: 2022, operating hours: 20 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, compressed air connection: 10 bar, input frequency: 60 Hz, power: 9 kW (12.24 HP), We offer this as new CEAD S25 LSAM Extruder, year of construction 2022. Model: S25 Extruder Serial number: EX-006-S25 Input phases: 3 phases Input voltage: 400 V Input frequency: 50-60 Hz Input current: 32 A Nwodpjy Nk S Nsfx Ag Ion Power: 9 kW Short-circuit current rating: 10 kA Air pressure: 6-10 bar Air pressure: 87-145 psi Recommended RCD: 30 mW Pellet drier and feeder are included. Almost 2 tons of Airtech Dahltram® C-250CF pellets are included + purging compound. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, overall weight: 5,700 kg, number of axes: 4, This 4-axis Mazak QTN 250 II MSY was manufactured in 2015. It features a maximum swing diameter of 640 mm and a maximum machining diameter of 380 mm. The machine includes a main spindle with a chuck diameter of 250 mm and a counter spindle with a chuck diameter of 210 mm. If you are looking to get high-quality turning capabilities, consider the Mazak QTN 250 II MSY horizontal turning machine we have for sale. Contact us for further details. -Information • • CNC control: MAZATROL MATRIX NEXUS 2 / MATRIX II • Working capacity: • Maximum swing diameter: 640 mm • Maximum machining diameter: 380 mm • Maximum machining length: 500 mm • Bar capacity: 77 mm • Axis travel: • C-axis rapid movement: 550 (as stated) • Tailstock travel: 500 mm (as stated) • Main spindle: • Chuck diameter: 250 mm • Nose: ASA 8 • Counter spindle: • Chuck diameter: 210 mm • Maximum speed: 5,000 rpm • Nose: ASA 5 • Driven tools: • Maximum speed: 5,000 rpm • Feed rates: • X-axis rapid traverse: 36,000 mm/min • Z-axis rapid traverse: 36,000 mm/min • Coolant tank capacity: 300 litres Additional equipment • Automatic loading and unloading system by MECCANO • FANUC ARC Mate 100iC/12 robot (per photos) Nwjdpfxezpypuj Ag Ion • Tooling package as shown in the photographs and video • Assorted tool holders as shown in the photographs Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2018, operating hours: 278 h, functionality: fully functional, type of input current: AC, total width: 1,015 mm, total length: 2,250 mm, total height: 1,210 mm, overall weight: 935 kg, input voltage: 400 V, We offer this used DILO SF6 service cart L170R01+Storage Tank, type Version L170R1BBB0B0 (B176R), year of manufacture 2018. Technical description (seller Lund University/Accelerator Laboratory Equipment) SF₆ liquefier and a separate 1000l storage tank for liquid SF₆. The equipment is mounted on wheels and is intended for handling SF₆ in gaseous and liquid form. The stated operating time for the liquefying compressor itself is 278 hours, referring to the time during which the machine has actively been liquefying SF₆. The pumps used for vacuum pumping/recovery of SF₆ have a higher total usage time, but the exact value is not known. Total cycle time may vary depending on tank size and process conditions. For a large SF₆ tank, a complete cycle may take approximately 12–24 hours, while a smaller tank may be handled within a couple of hours. This description is based on information supplied by the seller. The storage tank is specified for a maximum filling of 1,000 litres, corresponding to approximately 980 kg, and is included, possibly together with 224 kg of SF₆ in gaseous and liquid form:INCLUDED. Nedpsz E H Dhefx Ag Iswn Item and key data Equipment SF₆-liquefier and storage tank for liquid SF₆; all equipment on wheels. Producer DILO Armaturen und Anlagen GmbH, Germany Version L170R1BBB0B0 (B176R) MAT 1037463 Year 2018 Reference price EUR 88,019.19 (2017 new price, as stated in the supplied information). RESERVE PRICE: 45000 EUR. Lower bids will not be accepted. (Plant is very little used at University) The item will be sold to the highest bidder, provided that the reserve price has been reached and all other sales conditions are fulfilled. The buyer is responsible for and pays for all transport from Lund University’s handover location. Costs for loading, packing, transport, insurance and other related measures are borne by the buyer unless otherwise expressly stated. Bidders are advised to assess the condition, functionality and suitability of the equipment themselves before submitting a bid. The equipment is offered in its existing condition based on the information available. At the buyer’s request, Lund University may assist with a test run/demonstration at the buyer’s site. The buyer shall cover all costs associated with the university’s participation, including travel and hotel costs. The sale may also includes 224 kg of liquid and gaseous SF₆. The buyer is responsible for ensuring that handling, transport, receipt, storage and use comply with all applicable requirements and regulations, certificates and so on, in force.

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Nwodszi Ihfopfx Ag Ien Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: excellent (used), Year of construction: 1962, machine/vehicle number: 12.178, 🛠️ WALDRICH SIEGEN WS IIa 100/25 x 5000 CNC roll grinding machine – The perfect base for a retrofit! Get your hands on a high-quality roll grinding machine from WALDRICH SIEGEN – renowned for its exceptional stability and precision in heavy-duty applications. The machine was converted to CNC by Herkules in 1996 and is in excellent mechanical condition. ⚠️ Important – but your opportunity! The machine is currently not operational as the electrical equipment and CNC control system need to be replaced. 👉 Your advantage: Take advantage of this opportunity for a bespoke retrofit and get state-of-the-art technology at a fraction of the cost of a new machine. 💰 Nwsdpfsfbb D Dsx Ag Ijn 📊 Technical highlights 🔩 Grinding diameter up to 1,200 mm 📏 Length up to 5,000 mm ⚖️ Workpieces up to 25 tonnes ⚙️ Grinding wheel up to 900 mm Ø 🚀 Drive power up to 97.5 kW 🎯 Precision up to 0.001 mm 🧰 Features 🔄 Cylindrical & crown grinding 🖥️ CNC grinding support 🔁 Automatic feed with wear compensation 🎨 Partially modernised & repainted 💡 Why this machine? ✅ Solid industrial quality ✅ Perfect for modernisation / retrofitting ✅ Ideal for large roller machining ✅ Significantly cheaper than comparable new machines 👀 Viewing available at any time! Flexible appointment available 📅

Year of construction: 2005, condition: good (used), Pallet with 18H7 T-slots compatible with the DMG DMC 100 H and DMG DMC 100 U, as well as the DMC 125H/U Duoblock >10 pallets available Nwodpfx Aszkbt Djg Ion