Used Dieffenbacher Po 1000 A (Uvv) for sale (73,918)

Condition: used, Year of construction: 1979, pressure 1000 t distance between columns 3030 mm stroke 350 mm Distance table/ram, max. stroke up, adjustment up 1400 mm table surface area 3000 x 2000 mm table height over floor 430 mm side window 1450 x 1400 mm ram surface 3000 x 2000 mm speed down 300 mm/s Dcsdpfxjvuk I Ao Agvjh speed up 340 mm/s working speed 18 - 44 mm/s return capacity 120 t oil volume 4400 l width with platform 4950 mm power capacity 2 x 90,0 + 10,0 kW weight 87,0 t Dimensions (WxDxH) 4,35 x 3,65 x 7,55 m height over floor 6,05 m height beneath floor 1,5 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work stored in partly dismantled condition free loaded to truck

Year of construction: 1978, condition: used, pressure 2000 /1000* t distance between columns 2650 mm stroke 500 mm column travel -side 500 x 1000 mm diameter of piston 710 mm number of pistons 2 distance between table / ram 1000 mm operating pressure 130 / 230 bar dayligth 800 mm table length 2500 mm table width 1600 mm table height 250 mm draw back pressure 500 kN number of T-slots 8 turning speeds 1500 U/min rapid speed 120 - 140 mm/min closing speed max. 120 - 140 mm/sec. return of plunger by small single cylinders 100 - 110 mm/sec hydraulical ram locking cutting sound absorber 300 t Dcedpfed Ih Ncsx Agvoh die cushion capacity 200 t die cushion stroke 250 mm speed of die cushion 100 mm/sec frequency 50 Hz voltage 380 V quantity of oil 2000 l total power requirement 93 kW weight of the machine ca. 100 t dimensions of the machine ca. 5000 x 2500 x 7200 mm transport measurements ca. 6500 x 3750 x 2190 mm 1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, pressing force: 1,250 t, stroke length: 270 mm, table width: 1,270 mm, table length: 1,250 mm, overall weight: 70,000 kg, working height: 630 mm, Equipment: safety light barrier, Dieffenbacher P0-F 1250A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Dedpfx Agov E Rihovoch Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher P0-F 1250A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. Dcjdpfx Agsv E Nlzovjh New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university environment and was only used very sparingly. All cables and hoses in the wet area have been replaced. It has extremely low operating hours. As we specialize in Karstens cylindrical grinding machines, we can offer you full service (electrical and mechanical) for the machine after purchase. Technical Data: Centre distance: 1000 mm Centre height: 180 mm Workpiece weight: 70 kg (between centers, cantilevered), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece spindle: Morse Taper 4, infinitely variable speed 30–450 rpm, swiveling range 0–90° Tailstock: Morse Taper 4, quill stroke 45 mm Tailstock rest beside Z-axis table Quill force: 200–600 N Table swivel: 12.5 degrees Travel of infeed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Dodsh Rit Eopfx Agvsch Machine weight: net 3,500 kg Infeed drive by DC motor Air cushion-supported rapid adjustment of the grinding spindle headstock for fast and safe positioning at the grinding station. Separate drives for spindles for external and internal grinding. Fully automatic operation cycle, feed movement controlled via rotary switch: Rapid advance, rapid retraction, grinding mode, feed stop, mym-feed adjustment. Automatic longitudinal grinding cycle Central coolant supply for all grinding stations Workpiece headstock with infinitely adjustable drive for rotating and lockable spindle. Infeed control for longitudinal grinding and plunge grinding, settings for retraction, feed amounts, feeds, spark-out times, idle strokes. Digital readout for X-axis by Heidenhain Paper band filter unit can be offered on request. Comparable to Weiss/ EMAG/ GP-cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Condition: like new (used), Year of construction: 2016, M024 — Wittmann Battenfeld Wittmann Battenfeld smart power 350/1000* (-) 📐 *CLAMPING UNIT* • Clamping force: 350 T • Coining: YES • Max mold weight: - kg • Max mold weight per plate: - kg • Size between bars (WxH): 800x720 mm • Min mold height: 400 mm • Max mold height: - mm • Max stroke open: 1240 mm • Centering ring FIX / MOVE: 160 / 160 mm • Fast clamping system: NO 🔌 *MOLD INTERFACE* • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) • Water cooling circuits: 8+6 • Hydraulic circuits (cores): 1+1 Dedpfxsy Tn Dwo Agvjch • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: x 💉 *INJECTION UNIT* • Screw diameter: 45 mm • Nozzle face + thread: R??+M24x1,6 • Injection unit type: 1000 • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2480 Bar • Max injection rate: 280 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: YES • Sockets 400V/16A: 7 • Sockets 400V/32A: 4 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 6 • Air pressure ports: 5 • User inputs / outputs: 0 / 0

Condition: excellent (used), Working dimensions: 230x160mm Spindle configuration: 1. Lower 15kW – Powerlock Dcedpsy U Iipjfx Agvoh 2. Right 15kW – Powerlock 3. Left 15kW – Powerlock 4. Upper 22kW – Powerlock 5. Lower 15kW – Powerlock 6. Upper 30kW – Powerlock 7. Lower 15kW – Powerlock Feed drive - 7.5kW Spindle speed 12,000 rpm Pneumatic pressure rollers for the infeed Feed drive on cardan shafts Smooth feed speed adjustment 6/36 m/min Automatic lubrication of the table Table made with MaratonCoating technology Control system: PowerCOM with motor control in Polish Soundproof cabin VibroControl vibration sensor Year of manufacture: 2010 Highnech E1 feeder, 2010 Infeed rollers driven by a 7.5 kW hydraulic pump.

Condition: used, Year of construction: 1991, pressure 500 t distance between columns 1910 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 700 mm table surfache without cutting impact cushions 1910 x 1360 mm table surfache with cutting impact cushions 1600 x 1360 mm table height over floor 800 mm ram surface 1600 x 1270 mm Side window 600 mm speed down 400 mm/s speed up 330 mm/s working speed 10 - 28 mm/s oil volume 1200 l power requirement 60,0 kW weight 40,0 t Dimensions (WxDxH) 3,6 x 2,5 x 5,0 m height over floor 4,5 m with oil-hydraulic drive, cutting impact cushioning, two-hand operation table size depending on cutting impact devices: Dodevuuiqjpfx Agvsch - without approx. 1910 x 1360 mm - with approx. 1600 x 1360 mm

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 102848, functionality: fully functional, operating hours: 3,142 h, empty load weight: 5,000 kg, feed rate X-axis: 33 m/min, number of spindles: 7, TECHNICAL DETAILS Number of spindles: 7 Spindle 1 - Spindle type: Bottom - Motor power: 15 kW - Tooling: Yes Spindle 2 - Spindle type: Right - Motor power: 11 kW - Tooling: Yes Spindle 3 - Spindle type: Left - Motor power: 11 kW - Tooling: Yes Spindle 4 - Spindle type: Top - Motor power: 22 kW - Tooling: Yes Spindle 5 - Spindle type: Bottom - Motor power: 15 kW - Tooling: Yes Spindle 6 - Spindle type: Top - Motor power: 30 kW - Tooling: Yes Spindle 7 - Spindle type: Bottom - Motor power: 15 kW Dsdoy Nyb Hspfx Agvsch Minimum planing width: 20 mm Maximum planing width: 300 mm Minimum planing height: 3 mm Maximum planing height: 160 mm Infeed table length: 1,000 mm Feed roller diameter: 140 mm Extraction nozzle diameter: 160 mm Feed speed: Manual Minimum feed speed: 5 m/min Maximum feed speed: 33 m/min Feed speed regulation: Infinitely variable MACHINE DETAILS Voltage: 400 V Current consumption: 278 A Circuit breaker: 400 A Power: 128 kW Dimensions & weight Dimensions (L x W x H): 5,500 x 2,400 x 2,100 mm Net weight: 5,000 kg Operating hours: 3,142 h EQUIPMENT Driven rollers in the table Powerlock Cutterhead drive: Cardan shaft drive Lubrication system: Automatic

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Colour: Grey Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 2: - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 3: - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: - - Motor power [kW]: 22 - - Tool present: Yes - └ Spindle 5: - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 Dcodpeyr Rm Refx Agvoh - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2025, condition: used, New: Yes Empty weight: 2.250 kg Dimensions of cargo space: 245 x 140 x 200 cm CE mark: yes Serial number: 2002005 Dcedpfexuzupex Agvsh Please contact Team DPX for more information

Condition: used, Year of construction: 2004, functionality: fully functional, working width: 230 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 160 mm, total width: 230 mm, total length: 5,000 mm, overall weight: 6,600 kg, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, rotational speed (min.): 8,000 rpm, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, input voltage: 400 V, table length: 2,500 mm, shaft diameter: 40 mm, number of spindles: 8, extraction connection diameter: 140 mm, Equipment: motor brake, WEINIG profiler, model Powermat 1000, equipped with: lower horizontal shaft, right spindle, left spindle for all widths, right spindle, upper horizontal shaft, lower horizontal shaft, upper horizontal shaft, lower horizontal shaft. CNC on left spindle, upper horizontal shafts, finishing lower horizontal shafts. 8,000 rpm motors, equipped with PowerLock, 80 mm spindle stroke, metric counter of produced linear meters, grooved table, feed speed: 36 m/min. Dcsdjy Aywujpfx Agvjh

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 36 m/min, working width: 230 mm, planing height: 160 mm, planing width: 230 mm, working height: 160 mm, total width: 2,400 mm, total height: 1,800 mm, power of feed motor: 5,000 W, jointer table length: 1,200 mm, table length: 1,200 mm, number of spindles: 7, 7-spindle moulder with 6 PowerLock spindles. All spindles are electronically controlled (except for the planer head). CNC PowerCom control. Working width: 20-230 mm, Working height: 8-160 mm, Feed speed: 6-36 m/min, 5 kW, with electronic variable speed drive. 1.2 m infeed table. Automatic lubrication pump (Waxilit). 8 pneumatic pressure shoes and 3 rollers on the table. Configuration: Bottom horizontal spindle 5.5 kW Right vertical spindle 7.5 kW with PowerLock Left vertical spindle 7.5 kW with PowerLock Right vertical spindle 7.5 kW with PowerLock Dcedpfxsy At Efe Agvsh Top horizontal spindle 11 kW with PowerLock Bottom horizontal spindle 11 kW with PowerLock Top horizontal spindle 11 kW with PowerLock Fully reconditioned four-sided moulder.

Condition: new, Year of construction: 2026, Machine type: BPT 1000 Manufacturer: ERBA Power: 2 x 5.5 kW Total volume: 1,000 L Dcjdpfxoyq Rcpo Agvjh Description: The ERBA BPT 1000 twin-motor long trough vibratory finishing machine is ideal for ball polishing or processing heavy workpieces. Thanks to its two motors, it can handle even particularly heavy media loads and applies the necessary pressure to the workpieces. It is equipped with a durable hot-cast polyurethane lining. Emptying or separation is performed via a bottom outlet (manual/pneumatic). The process chamber can be partitioned using removable dividers, allowing for individual processing of parts. The machine comes with an electrical control cabinet and can optionally be fitted with fully automatic PLC process control. The motor speed can be infinitely adjusted by means of a frequency converter (optional). As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The listed price is net, plus the currently applicable statutory VAT and freight costs. The pictures may show the system including optional accessories, which are available at additional cost. The quoted price refers to the base machine. The photos are for illustrative purposes. Actual appearance and size may differ from the images. If you are interested, we look forward to hearing from you. We are happy to provide you with a consultation, with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer is for presentation purposes only. Contract negotiations take place via telecommunication (Email, phone, messaging portal). Initially, we will send you a non-binding quote, along with our general terms and conditions including imprint and information on the right of withdrawal, before any purchase/contract is concluded.

Condition: used, Manufacturer : Halvor Forberg A/S Dodjx R Db Hepfx Agvsch Model: F-1000 Type : Paddle mixer Nominal volume : 1000 L Min volume : 400 L Max volume : 1400 L Total discharge : pneumatic Power : 15 kW Weight : 3000 kg

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Dedpfod Ih Nrjx Agvsch Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 108111, functionality: fully functional, working width: 240 mm, planing height: 160 mm, working height: 180 mm, Four-sided planer after service inspection, machine weight 3900 kg Dcedpfovrq U Djx Agvsh

Condition: ready for operation (used), From business liquidation: Hypertherm Powermax 1000G Device has been function tested! Dcedpfx Asxq N Tregvsh with 10-meter torch package on transport cart 380 Volt 20–60 ampere power output Quality cut up to approx. 22 mm Severance cut up to approx. 30 mm + several spare nozzles (see photo)

Condition: used, Name: Dosing system for polymers Manufacturer: Alltech Type: Polymat 1000 V7 KD S Year built: 2003 Content: 1000 Liter Conveying / dosing of: Powdered # Chamber: 2 Control: Yes Driving force: 1: 0,55 kW, 12 0,55 kW Model: Horizontal Dimensions: Length 2000 x width 900 x height 1900 mm Empty weight: 1000 kg Technical doc.: Yes Dcsdsvt Sdpopfx Agvoh Accessories: Dry material dispenser type T09K0007 Condition: Second hand Price: On demand

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Infeed width 1st folding unit: 720 mm Dcodpfx Agjxyhnyovoh Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: used, Year of construction: 1979, pressure:63 t throat:315 mm stroke:200 mm power capacity:15 kW piston stroke:200 mm :450 mm table-size:710 X 630 mm dimension of ram:710 X 630 mm return capacity:1,3 t closing speed:210 mm/min return speed:210 mm/sec Dcodpfxjcxxmkj Agveh total height over floor:2500 mm length in width:1000 mm depth:1600 mm motor speeds::1500 u7MIN: voltage:380 V control voltage:220 V weight of the machine ca.:5 t

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Testing Device Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion testing device / salt spray chamber for salt spray, condensation water, and combined testing. Technical Data Djdpfxjzba N Tj Agvsch Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to nameplate: S Watt: 2800 W K Watt: 2150 W B Watt: 500 W W Watt: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption (humidifier): approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling volume (bottom trough system): approx. 15 liters Testing procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used device from industrial application. Optical condition according to the pictures. Interior with visible deposits / corrosion traces. Device can be switched on, display is active. A complete technical functional test under test conditions was not performed by us. Inspection possible by appointment. Scope of supply: see pictures. Loading can be arranged. All information provided to the best of our knowledge based on available documents, nameplates, software displays, and data sheets. Errors and changes reserved.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series Oi-MB, total height: 2,200 mm, total width: 2,500 mm, table load: 850 kg, overall weight: 5,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 3,200 mm, number of axes: 3, This 3-axis MIND MACH T. VMC 1000/A was manufactured in 2007. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1200 x 600 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the MIND MACH T. VMC 1000/A vertical machining center we have for sale. Contact us for further details. Dsdsy T R Hbepfx Agvoch • Rotary table: No • Table size: 1200 x 600 mm Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2001, MACH MIND VMC 1000 - A MACHINING CENTER Dcsdpfoyuqapjx Agvsh CNC FANUC SERIES O – MD TABLE SIZE: 1,200 mm x 600 mm MAXIMUM ALLOWED TABLE LOAD: 850 KG TRAVELS: X: 1,020 mm Y: 610 mm Z: 610 mm MAX. DISTANCE TABLE – SPINDLE: 135 – 745 mm SPINDLE TAPER: BT 40 SPINDLE SPEED: 60 – 8,000 RPM TOOL MAGAZINE: 24 POSITIONS CHIP COLLECTION TANK WEIGHT: 6,000 KG COMPLETE WITH FULL DOCUMENTATION YEAR: 2001

Condition: used, Year of construction: 1988, pressure 100 t distance between columns 1180 mm stroke 3 - 120 mm no. of strokes - 95 /min distance table/ram, stroke up 500 mm table surface area 1100 x 700 mm Hole in the table 220 x 100 mm table height over floor 800 mm side window 400 mm ram surface 750 x350 mm ram adjustment 100 mm Oil volume 1300 l power requirement 42,0 kW weight 10,0 t dimensions (WxDxH) 1,8 x 1,8 x 3,55 m with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation with electro-hydraulic roll feed Dcodpfx Agovut Tzevoh no foundation pit necessary